Plant, Nathaniel G.

About the author


2010 Cape Canaveral, Florida Single-beam Bathymetry Data

Single-beam bathymetric surveys were conducted on July 27-29, 2010 along 37 cross-shore transects offshore from Cape Canaveral, Fla. The transects were spaced 500 meters (m) apart in the alongshore direction and each was approximately five kilometers (km) long in the cross-shore.

Info
iCoast - Did the Coast Change? Crowd-sourced Coastal Classifications

On October 29, 2012, Hurricane Sandy made landfall as a post-tropical storm near Brigantine, New Jersey, with sustained winds of 70 knots (80 miles per hour) and tropical-storm-force winds extending 870 nautical miles in diameter (Blake and others, 2013). The effects of Hurricane Sandy’s winds and storm surge included erosion of the beaches and dunes as well as breaching of barrier islands in both natural and heavily developed areas of the coast (Spokin et. al., 2014). On November 4-6, 2012, the U.S. ...

Info
Point shapefile of probability of shoreline change along the U.S. Atlantic Coast (ProbSLC_AtlanticData.shp)

During the 21st century, sea-level rise will have a wide range of effects on coastal environments, human development and infrastructure in coastal areas. Consequently there is a need to develop modeling or other analytical approaches that can be used to evaluate potential impacts to inform coastal management. This shapefile provides the data that were used to develop and evaluate the performance of a Bayesian network (BN) that was developed to predict long-term shoreline change associated with sea-level ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Locations of convergences in the maximum alongshore current

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Locations of decelerations in the direction of flow in the maximum alongshore current

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: peak wave period

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Ratio of the wave- and current-induced shear stress to the critical value for oil-tar balls and sediment mobilization over a tidal cycle

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Ratio of the wave- and current-induced shear stress to the critical value for oil-tar balls and sediment mobilization weighted by probability of wave scenario occurrence

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Ratio of wave- and current-induced shear stress to critical values for oil-sand ball and sediment mobilization

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Significant wave height

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Surf-zone integrated alongshore potential flux for oil-sand balls

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Surf-zone integrated alongshore potential flux for oil-sand balls of varying sizes weighted by probability of wave scenario occurrence

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: wave direction

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Scenarios_Grid

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Tidal_Grid

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Estuarine Back-barrier Shoreline and Beach Sandline Change Model Skill and Predicted Probabilities: Event-driven backshore shoreline change

The Barrier Island and Estuarine Wetland Physical Change Assessment was created to calibrate and test probability models of barrier island estuarine shoreline (backshore) and beach sandline change for study areas in Virginia, Maryland, and New Jersey. The models examined the influence of hydrologic and physical variables related to long-term and storm-derived overwash and back-barrier shoreline change. Input variables were constructed into a Bayesian Network (BN) using Netica, a computer program created by ...

Info
Estuarine Back-barrier Shoreline and Beach Sandline Change Model Skill and Predicted Probabilities: Event-driven beach sandline change

The Barrier Island and Estuarine Wetland Physical Change Assessment was created to calibrate and test probability models of barrier island estuarine shoreline (backshore) and beach sandline change for study areas in Virginia, Maryland, and New Jersey. The models examined the influence of hydrologic and physical variables related to long-term and storm-derived overwash and back-barrier shoreline change. Input variables were constructed into a Bayesian Network (BN) using Netica, a computer program created by ...

Info
Estuarine Back-barrier Shoreline and Beach Sandline Change Model Skill and Predicted Probabilities: Long-term sandline change

The Barrier Island and Estuarine Wetland Physical Change Assessment was created to calibrate and test probability models of barrier island estuarine shoreline (backshore) and beach sandline change for study areas in Virginia, Maryland, and New Jersey. The models examined the influence of hydrologic and physical variables related to long-term and storm-derived overwash and back-barrier shoreline change. Input variables were constructed into a Bayesian Network (BN) using Netica, a computer program created by ...

Info
Estuarine Back-barrier Shoreline and Sandline Change Model Skill and Predicted Probabilities: Long-term back-barrier shoreline change

The Barrier Island and Estuarine Wetland Physical Change Assessment was created to calibrate and test probability models of barrier island estuarine shoreline (backshore) and beach sandline change for study areas in Virginia, Maryland, and New Jersey. The models examined the influence of hydrologic and physical variables related to long-term and storm-derived overwash and back-barrier shoreline change. Input variables were constructed into a Bayesian Network (BN) using Netica, a computer program created by ...

Info
XBeach Bottom Friction Scenarios: Model Inputs and Results

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Info
XBeach Bottom Friction Scenarios: Model Inputs and Results

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Info
XBeach Bottom Friction Scenarios: Model Inputs and Results for Hurricane Ivan Constant Land Friction Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Info
XBeach Bottom Friction Scenarios: Model Inputs and Results for Hurricane Ivan Default Friction Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Info
XBeach Bottom Friction Scenarios: Model Inputs and Results for Hurricane Ivan Spatially Varying Friction Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Info
XBeach Bottom Friction Scenarios: Model Inputs and Results for Hurricane Katrina before Hurricane Ivan Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Info
XBeach Bottom Friction Scenarios: Model Inputs and Results for Hurricane Katrina Constant Land Friction Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Info
XBeach Bottom Friction Scenarios: Model Inputs and Results for Hurricane Katrina Default Friction Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Info
XBeach Bottom Friction Scenarios: Model Inputs and Results for Hurricane Katrina Spatially Varying Friction Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Info
Dauphin Island Storms and Sea Level Rise Assessment: XBeach Model Input and Results

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Info
Dauphin Island Storms and Sea Level Rise Assessment: XBeach Model Input and Results for the Hurricane Ivan Intermediate-Low Sea Level Rise (SLR) Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Info
Dauphin Island Storms and Sea Level Rise Assessment: XBeach Model Input and Results for the Hurricane Ivan Low Sea Level Rise (SLR) Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Info
Dauphin Island Storms and Sea Level Rise Assessment: XBeach Model Input and Results for the Hurricane Ivan Present-Day Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Info
Dauphin Island Storms and Sea Level Rise Assessment: XBeach Model Input and Results for the Hurricane Ivan Static Intermediate-Low Sea Level Rise Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Info
Dauphin Island Storms and Sea Level Rise Assessment: XBeach Model Input and Results for the Hurricane Ivan Static Low Sea Level Rise Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Info
Dauphin Island Storms and Sea Level Rise Assessment: XBeach Model Input and Results for the Hurricane Katrina Intermediate-Low Sea Level Rise Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Info
Dauphin Island Storms and Sea Level Rise Assessment: XBeach Model Input and Results for the Hurricane Katrina Low Sea Level Rise Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Info
Dauphin Island Storms and Sea Level Rise Assessment: XBeach Model Input and Results for the Hurricane Katrina Present-Day Scenario

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Info
Shorelines Derived from Continuous Video-Imagery at the NASA-Kennedy Space Center, Florida From August 2011 to July 2012

In 2010, a video camera was installed near the northern boundary of the National Aeronautics and Space Administration-Kennedy Space Center (NASA-KSC) property along the Atlantic coast of Florida. A region extending 1 kilometer (km) to the south of the camera was established as the region of interest for the video image observations. During every daylight hour of camera operation from August 8, 2011 to July 24, 2012, a time exposure (timex) image product was created by averaging pixel color intensity for all ...

Info
National Assessment of Hurricane-Induced Coastal Erosion Hazards: Gulf of Mexico

These data sets contain information on the probabilities of hurricane-induced erosion (collision, inundation and overwash) for each 1-km section of the Gulf of Mexico coast for category 1-5 hurricanes. The analysis is based on a storm-impact scaling model that uses observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast will respond to the direct landfall of category 1-5 hurricanes. Hurricane-induced water levels, due to both surge and waves, are compared to ...

Info
National Assessment of Hurricane-Induced Coastal Erosion Hazards: Mid-Atlantic Coast

These data sets contain information on the probabilities of hurricane-induced erosion (collision, inundation and overwash) for each 1-km section of the Mid-Atlantic coast for category 1-4 hurricanes. The analysis is based on a storm-impact scaling model that uses observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast will respond to the direct landfall of category 1-4 hurricanes. Hurricane-induced water levels, due to both surge and waves, are compared to ...

Info
National Assessment of Hurricane-Induced Coastal Erosion Hazards: Southeast Atlantic

These data sets contain information on the probabilities of hurricane-induced erosion (collision, inundation and overwash) for each 1-km section of the Southeast Atlantic coast for category 1-5 hurricanes. The analysis is based on a storm-impact scaling model that uses observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast will respond to the direct landfall of category 1-5 hurricanes. Hurricane-induced water levels, due to both surge and waves, are ...

Info
National Assessment of Hurricane-Induced Coastal Erosion Hazards: Mid-Atlantic Coast (version 2)

These data sets contain information on the probabilities of hurricane-induced erosion (collision, inundation and overwash) for each 1-km section of the Mid-Atlantic coast for category 1-4 hurricanes. The analysis is based on a storm-impact scaling model that uses observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast will respond to the direct landfall of category 1-4 hurricanes. Hurricane-induced water levels, due to both surge and waves, are compared to ...

Info
30 meter Esri binary grids of coastal response type probabilities with respect to projected sea levels for the Northeastern U.S. from Maine to Virginia for the 2020s, 2030s, 2050s and 2080s (Albers, NAD 83)

The U.S. Geological Survey has been forecasting sea-level rise impacts on the landscape to evaluate where coastal land will be available for future use. The purpose of this project is to develop a spatially explicit, probabilistic model of coastal response for the Northeastern U.S. to a variety of sea-level scenarios that take into account the variable nature of the coast and provides outputs at spatial and temporal scales suitable for decision support. Model results provide predictions of adjusted land ...

Info
30 meter Esri binary grids of predicted elevation with respect to projected sea levels for the Northeastern U.S. from Maine to Virginia for the 2020s, 2030s, 2050s and 2080s (Albers, NAD 83)

The U.S. Geological Survey has been forecasting sea-level rise impacts on the landscape to evaluate where coastal land will be available for future use. The purpose of this project is to develop a spatially explicit, probabilistic model of coastal response for the Northeastern U.S. to a variety of sea-level scenarios that take into account the variable nature of the coast and provides outputs at spatial and temporal scales suitable for decision support. Model results provide predictions of adjusted land ...

Info
30 meter Esri binary grids of probability of predicted elevation with respect to projected sea levels for the Northeastern U.S. from Maine to Virginia for the 2020s, 2030s, 2050s and 2080s (Albers, NAD 83)

The U.S. Geological Survey has been forecasting sea-level rise impacts on the landscape to evaluate where coastal land will be available for future use. The purpose of this project is to develop a spatially explicit, probabilistic model of coastal response for the Northeastern U.S. to a variety of sea-level scenarios that take into account the variable nature of the coast and provides outputs at spatial and temporal scales suitable for decision support. Model results provide predictions of adjusted land ...

Info
Land-Cover Data Derived from Landsat Satellite Imagery, Assateague Island to Metompkin Island, Maryland and Virginia, 1984 to 2014

The U.S. Geological Survey has a long history of responding to and documenting the impacts of storms along the Nation’s coasts and incorporating these data into storm impact and coastal change vulnerability assessments. These studies, however, have traditionally focused on sandy shorelines and sandy barrier-island systems, without consideration of impacts to coastal wetlands. The goal of the Barrier Island and Estuarine Wetland Physical Change Assessment project is to integrate a wetland-change assessment ...

Info
Landsat satellite imagery, Assateague Island to Metompkin Island, Maryland and Virginia, 1984 to 2014

The U.S. Geological Survey has a long history of responding to and documenting the impacts of storms along the Nation’s coasts and incorporating these data into storm impact and coastal change vulnerability assessments. These studies, however, have traditionally focused on sandy shorelines and sandy barrier-island systems, without consideration of impacts to coastal wetlands. The goal of the Barrier Island and Estuarine Wetland Physical Change Assessment project is to integrate a wetland-change assessment ...

Info
Shoreline Positions and Sand Extents Derived from Landsat Satellite Imagery, Assateague Island to Metompkin Island, Maryland and Virginia, 1984 to 2014

The U.S. Geological Survey has a long history of responding to and documenting the impacts of storms along the Nation’s coasts and incorporating these data into storm impact and coastal change vulnerability assessments. These studies, however, have traditionally focused on sandy shorelines and sandy barrier-island systems, without consideration of impacts to coastal wetlands. The goal of the Barrier Island and Estuarine Wetland Physical Change Assessment project is to integrate a wetland-change assessment ...

Info
National Assessment of Hurricane-Induced Coastal Erosion Hazards: Gulf of Mexico Update

This dataset contains information on the probabilities of hurricane-induced erosion (collision, inundation and overwash) for each 1-km section of the Gulf of Mexico coast for category 1-5 hurricanes. The analysis is based on a storm-impact scaling model that uses observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast will respond to the direct landfall of category 1-5 hurricanes. Hurricane-induced water levels, due to both surge and waves, are compared to ...

Info
Storm-Impact Scenario XBeach Model Results – Scenario 1 Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Storm-Impact Scenario XBeach Model Inputs – Initial Bathymetry and Topography Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Storm-Impact Scenario XBeach Model Results – Scenario 11 Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Storm-Impact Scenario XBeach Model Results – Scenario 12 Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Storm-Impact Scenario XBeach Model Results – Scenario 20 Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Storm-Impact Scenario XBeach Model Results – Scenario 2 Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Storm-Impact Scenario XBeach Model Results – Scenario 3 Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Storm-Impact Scenario XBeach Model Results – Scenario 6 Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Storm-Impact Scenario XBeach Model Results – Scenario 7 Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Storm-Impact Scenario XBeach Model Results – Scenario 8 Digital Elevation Model (DEM) Grid

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

Info
Hurricane Sandy Assessment of Potential Coastal Change Impacts: NHC Advisory 29, 1100 AM EDT MON OCT 29 2012

This dataset defines hurricane-induced coastal erosion hazards for the Delaware, Maryland, New Jersey, New York, and Virginia coastline. The analysis was based on a storm-impact scaling model that used observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast would respond to the direct landfall of Hurricane Sandy in October 2012. Hurricane-induced water levels, due to both surge and waves, were compared to beach and dune elevations to determine the ...

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs without restoration alternative for storminess bins (ST1-ST4) and sea level rise scenarios (SL1-SL3).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs without restoration alternative for storminess bins (ST1-ST4) and sea level rise scenarios (SL1-SL3).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs without restoration alternative for storminess bins (ST1-ST4) and sea level rise scenarios (SL1-SL3).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs without restoration measures for storminess bins (ST1-ST4) and sea level rise scenarios (SL1-SL3).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs with restoration alternative 2 that extends Pelican Island simulated with ST2_SL1 and ST3_SL3 scenarios

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs with restoration alternative 3 that extends Pelican Island simulated with ST2_SL1 and ST3_SL3 scenarios

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs with restoration alternative 4 that extends Pelican Island simulated with ST2_SL1 and ST3_SL3 scenarios

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs with restoration alternative 5 that extends Pelican Island simulated with ST2_SL1 and ST3_SL3 scenarios

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs with restoration alternative 6 that extends Pelican Island simulated with ST2_SL1 and ST3_SL3 scenarios

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Final DEMs with restoration alternative 7 that extends Pelican Island simulated with ST2_SL1 and ST3_SL3 scenarios

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Forecast Evolution Model Inputs and Results: Initial DEMs with and without restoration alternatives R2-R7

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Info
Dauphin Island Decadal Hindcast Model Inputs and Results: Final DEM

The model output of bathymetry and topography values resulting from a deterministic simulation at Dauphin Island, Alabama, as described in USGS Open-File Report 2019–1139 (https://doi.org/10.3133/ofr20191139), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry refer to Mickey and others (2020).

Info
Dauphin Island Decadal Hindcast Model Inputs and Results: Initial DEM

The model input for the bathymetry and topography values resulting from a deterministic simulation at Dauphin Island, Alabama, as described in U.S. Geological Survey (USGS) Open-File Report 2019-1139 (https://doi.org/10.3133/ofr20191139), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry refer to Mickey and others (2020).

Info
Barrier island geomorphology and seabeach amaranth metrics at 50-m alongshore transects, and 5-m cross-shore points for 2008 — Assateague Island, MD and VA.

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for developing approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the effects of sea-level rise on shoreline change, barrier island geomorphology, and habitat availability for species such as piping plover ...

Info
National Assessment of Hurricane-Induced Coastal Erosion Hazards: 2021 Update

This dataset contains information on the probabilities of hurricane-induced erosion (collision, inundation and overwash) for each 1-kilometer (km) section of the United States [Gulf of Mexico and Atlantic] coast for category 1-5 hurricanes. The analysis is based on a storm-impact scaling model that uses observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast will respond to the direct landfall of category 1-5 hurricanes. Hurricane-induced water levels, due ...

Info