{
    "tag": 14568,
    "title": "Contours--Offshore Monterey, California",
    "pubdate": "2016",
    "sername": null,
    "series_name": null,
    "issue": "DS 781",
    "publish": null,
    "publisher_name": null,
    "onlink": "https:\/\/cmgds.marine.usgs.gov\/catalog\/pcmsc\/SeriesReports\/DS_DDS\/DS_781\/XMLs_on_ScienceBase\/F70Z71C8_OffshoreMonterey\/Contours_OffshoreMonterey_metadata.faq.html",
    "format": null,
    "email": null,
    "descript": "This part of DS 781 presents bathymetric contours for several seafloor maps of the Offshore of Monterey map area, California. This metadata file refers to the data included in \"Contours_OffshoreMonterey.zip,\" which is accessible from https:\/\/doi.org\/10.5066\/F70Z71C8. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Hartwell, S.R., Cochrane, G.R., Golden, N.E., Watt, J.T., Davenport, C.W., Kvitek, R.G., Erdey, M.D., Krigsman, L.M., Sliter, R.W., and Maier, K.L. (S.Y. Johnson and S.A. Cochran, eds.), 2016, California State Waters Map Series\u2014Offshore of Monterey, California: U.S. Geological Survey Open-File Report 2016\u20131110, pamphlet 44 p., 10 sheets, scale 1:24,000, https:\/\/doi.org\/10.3133\/ofr20161110.  Bathymetric contours of the Offshore of Monterey map area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB) and by Monterey Bay Aquarium Research Institute (MBARI), as well as from bathymetric lidar data collected by the U.S. Army Corps of Engineers, Joint Airborne Lidar Bathymetry Center of Expertise (JALBTCX). Mapping was completed between 1998 and 2012 using a combination of 30-kHz Simrad EM-300 and 200-kHz\/400-kHz Reson 7125 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHplus bathymetric sidescan-sonar systems. Bathymetric lidar mapping was completed between 2009 and 2010 for the California Coastal Mapping Project (CCMP). The mapping missions collected bathymetry data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.  Bathymetric contours were generated separately from the modified 2-m and 5-m bathymetric surfaces then merged to one final contour dataset. 10-m intervals were generated in water depths shallower than 100 m, at 50-m intervals from 100 to 200 m, and at 200-m intervals in water depths deeper than 200 m. The original surface was smoothed using the Focal Mean tool in ArcGIS and a circular neighborhood with a radius of 20 to 30 m (depending on the area). The contours were generated from this smoothed surface using the ArcGIS Spatial Analyst Contour tool. The most continuous contour segments were preserved; smaller segments and isolated island polygons were excluded from the final output.",
    "lang": null,
    "journal": null,
    "pwid": null,
    "originator": [
        {
            "name": "Golden, Nadine E.",
            "role": "Author"
        }
    ],
    "index_term": [
        {
            "thcode": 2,
            "code": "80",
            "name": "bathymetry",
            "scope": "The elevation of the earth's surface beneath a body of water, especially the ocean, typically determined by measurements of depth from the water surface."
        },
        {
            "thcode": 2,
            "code": "1749",
            "name": "topographic maps",
            "scope": "Maps depicting the elevation and relief of the land surface or depth of a water body (bathymetry) in an area, usually shown using contour lines.  Typically these maps include manmade features and administrative boundaries as well as vegetation and hydrographic features."
        },
        {
            "thcode": 15,
            "code": "007",
            "name": "environment",
            "scope": "Environmental resources, protection and conservation, for example environmental pollution, waste storage and treatment, environmental impact assessment, monitoring environmental risk, nature reserves, landscape, water quality, air quality, environmental modeling"
        },
        {
            "thcode": 15,
            "code": "008",
            "name": "geoscientificInformation",
            "scope": "Information pertaining to earth sciences, for example geophysical features and processes, geology, minerals, sciences dealing with the composition, structure and origin of the earth's rocks, risks of earthquakes, volcanic activity, landslides, gravity information, soils, permafrost, hydrogeology, groundwater, erosion"
        },
        {
            "thcode": 15,
            "code": "010",
            "name": "imageryBaseMapsEarthCover",
            "scope": "Base maps, for example land\/earth cover, topographic maps, imagery, unclassified images, annotations, digital ortho imagery"
        },
        {
            "thcode": 15,
            "code": "014",
            "name": "oceans",
            "scope": "Features and characteristics of salt water bodies (excluding inland waters), for example tides, tidal waves, coastal information, reefs, maritime, outer continental shelf submerged lands, shoreline"
        },
        {
            "thcode": 23,
            "code": "22",
            "name": "Bathymetry and Elevation",
            "scope": "Includes measures of the height of a location above or below a reference surface. Bathymetry is the elevation of the Earth's surface beneath a body of water, especially the ocean, typically determined by measurements of depth from the water surface at mean lower low water. Distributions are topographic maps and bathymetric charts based on collected data and also include smoothed or gridded maps of bathymetry and elevation from observational data or other associated factors. Assessment data types include models of ecological value, economic value, or current rates of alterations due to erosion, accretion, climate change, and other stressors (for example, wetland habitat loss). Predictions are the results of models or projections of future distributions, values, or ecological impacts of bathymetry, including predicted changes due to natural and human forces such as erosion, deposition, sea-level rise, and dredging activities; predictions also include the results of scenario-based models of bathymetry changes under different management strategies."
        },
        {
            "thcode": 23,
            "code": "3",
            "name": "Distributions",
            "scope": "Locations or patterns of a feature of interest across space and (or) time. These data can include point data, lines, polygons, and temporal data at any scale relevant to CMSP and can be produced by observation, interpolation, or modeling. Distributions can also include maps or statistics of climatology, the environmental values that are expected to be observed at the present time."
        },
        {
            "thcode": 62,
            "code": "GC-044",
            "name": "Continental\/Island Shelf",
            "scope": "Physiographic Setting: That part of the continental margin that is between the shoreline and the continental slope (or a depth or 200 meters when there is no noticeable continental slope); it is characterized by its very gentle slope of 0.1\u00b0. ..."
        },
        {
            "thcode": 62,
            "code": "AS-013",
            "name": "Marine Nearshore Subtidal",
            "scope": "Tidal Zone: The substrate is generally continuously submerged in this zone and includes those areas below MLLW."
        },
        {
            "thcode": 62,
            "code": "AS-016",
            "name": "Marine Offshore Subtidal",
            "scope": "Tidal Zone: The substrate is subtidal and continuously submerged in this zone and includes those areas below MLLW."
        },
        {
            "thcode": 62,
            "code": "SC-026",
            "name": "Rock Substrate",
            "scope": "Substrate Class: Igneous, metamorphic, or sedimentary rock with particle sizes greater than or equal to 4.0 meters (4,096 millimeters) in any dimension that cover 50% or greater of the Geologic Substrate surface."
        },
        {
            "thcode": 62,
            "code": "GC-037",
            "name": "Transform Continental Margin",
            "scope": "Tectonic Setting: A feature defined by the transform fault that develops during continental rifting. ..."
        },
        {
            "thcode": 62,
            "code": "SC-029",
            "name": "Unconsolidated Mineral Substrate",
            "scope": "Substrate Class: Geologic Substrates with less than 50% cover of Rock Substrate. ..."
        }
    ],
    "place_term": [],
    "image": [
        {
            "name": "https:\/\/www.sciencebase.gov\/catalog\/file\/get\/56cf5fc5e4b015c306ed183c?name=Contours_OffshoreMonterey.jpg&allowOpen=true",
            "description": "Bathymetric contours offshore of Monterey."
        }
    ],
    "fan": []
}