{
    "tag": 20358,
    "title": "July 2021: Aerial imagery from UAS surveys of beaches at Fort Stevens State Park, OR, and Cape Disappointment State Park, WA",
    "pubdate": "20230623",
    "sername": null,
    "series_name": null,
    "issue": "DOI:10.5066\/P9BVTVAW",
    "publish": null,
    "publisher_name": null,
    "onlink": "https:\/\/cmgds.marine.usgs.gov\/catalog\/pcmsc\/DataReleases\/ScienceBase\/DR_P9BVTVAW\/FortStevens_BensonBeach_2021-07_aerial_imagery_metadata.faq.html",
    "format": null,
    "email": null,
    "descript": "This portion of the data release presents the raw aerial imagery collected during the uncrewed aerial system (UAS) survey conducted on the ocean beaches adjacent to the Columbia River Mouth at the Oregon-Washington border in July 2021. The imagery was acquired using a Department of Interior-owned 3DR Solo quadcopter fitted with a Ricoh GR II digital camera featuring a global shutter. The camera was mounted using a fixed mount on the bottom of the UAS and oriented in an approximately nadir orientation. The Fort Stevens State Park survey was conducted under Oregon Parks and Recreation Department Scientific Research Permit #235. Ten flights were conducted at Fort Stevens State Park on 22 July 2021, between 14:00 and 16:45 UTC (7:00 and 9:45 PDT).  A total of 3,002 aerial images from these flights are presented in this data release; the images from the third flight (F03) were not utilized for data processing and are not included in the data release. The Benson Beach survey at Cape Disappointment State Park was conducted under Washington State Parks and Recreation Commission Scientific Research Permit #170603. Thirteen flights were conducted at Benson Beach on 23 July 2021, between 14:30 and 16:40 UTC (7:30 and 9:40 PDT). A total of 3,648 aerial images from these flights are presented in this data release; the images from the second to the fifth flight (F02 through F05) and the seventh flight (F07) were not utilized for data processing and are not included in the data release. All flights were conducted at an approximate altitude of 120 meters above ground level resulting in a nominal ground-sample-distance (GSD) of 3.2 centimeters per pixel. Before each flight, the camera\u2019s digital ISO, aperture, and shutter speed were adjusted for ambient light conditions. For all flights the camera was triggered at 1 Hz using a built-in intervalometer. After acquisition, the images were renamed to include flight number and acquisition time in the file name. The coordinates of the approximate image acquisition locations were added ('geotagged') to the image metadata (EXIF) using the telemetry log from the UAS onboard single-frequency autonomous GPS. The image EXIF were also updated to include additional information related to the acquisition. The data release includes a total of 6,650 JPG images. Images from takeoff and landing sequences were not used for processing and have been omitted from the data release. To facilitate bulk download, the images from each flight are provided in a zip file named with the flight number.  In addition to the provided zip files, the images are also available for browsing and individual download on the USGS Coastal and Marine Hazards and Resources Program Imagery Data System at the following URL: https:\/\/cmgds.marine.usgs.gov\/idsviewer\/data_release\/10.5066-P9BVTVAW.",
    "lang": null,
    "journal": null,
    "pwid": null,
    "originator": [
        {
            "name": "Logan, Joshua B.",
            "role": "Author"
        },
        {
            "name": "Stevens, Andrew W.",
            "role": "Author"
        },
        {
            "name": "Johnson, Cordell D.",
            "role": "Author"
        },
        {
            "name": "Harrison, Shawn R.",
            "role": "Author"
        }
    ],
    "index_term": [
        {
            "thcode": 2,
            "code": "15",
            "name": "aerial photography",
            "scope": "The process of taking pictures with a camera from an aircraft. Use for both the process of photography from the air and the images produced by the process."
        },
        {
            "thcode": 2,
            "code": "468",
            "name": "geomorphology",
            "scope": "Branch of geology dealing with surface land features and the processes that create and change them."
        },
        {
            "thcode": 2,
            "code": "474",
            "name": "geospatial datasets",
            "scope": "Collections of related digital information that are geographically referenced."
        },
        {
            "thcode": 2,
            "code": "2046",
            "name": "image mosaics",
            "scope": "Composite images formed by overlapping existing images, typically arranged to achieve greater spatial coverage."
        },
        {
            "thcode": 2,
            "code": "981",
            "name": "remote sensing",
            "scope": "Acquiring information about a natural feature or phenomenon, such as the Earth's surface, without actually being in contact with it. USGS remote sensing is usually carried out with airborne or spaceborne sensors or cameras."
        },
        {
            "thcode": 2,
            "code": "1749",
            "name": "topographic maps",
            "scope": "Maps depicting the elevation and relief of the land surface or depth of a water body (bathymetry) in an area, usually shown using contour lines.  Typically these maps include manmade features and administrative boundaries as well as vegetation and hydrographic features."
        },
        {
            "thcode": 2,
            "code": "1176",
            "name": "topography",
            "scope": "Configuration of the land surface and sea floor."
        },
        {
            "thcode": 15,
            "code": "006",
            "name": "elevation",
            "scope": "Height above or below sea level, for example altitude, bathymetry, digital elevation models, slope, derived products, DEMs, TINs"
        },
        {
            "thcode": 15,
            "code": "008",
            "name": "geoscientificInformation",
            "scope": "Information pertaining to earth sciences, for example geophysical features and processes, geology, minerals, sciences dealing with the composition, structure and origin of the earth's rocks, risks of earthquakes, volcanic activity, landslides, gravity information, soils, permafrost, hydrogeology, groundwater, erosion"
        },
        {
            "thcode": 23,
            "code": "22",
            "name": "Bathymetry and Elevation",
            "scope": "Includes measures of the height of a location above or below a reference surface. Bathymetry is the elevation of the Earth's surface beneath a body of water, especially the ocean, typically determined by measurements of depth from the water surface at mean lower low water. Distributions are topographic maps and bathymetric charts based on collected data and also include smoothed or gridded maps of bathymetry and elevation from observational data or other associated factors. Assessment data types include models of ecological value, economic value, or current rates of alterations due to erosion, accretion, climate change, and other stressors (for example, wetland habitat loss). Predictions are the results of models or projections of future distributions, values, or ecological impacts of bathymetry, including predicted changes due to natural and human forces such as erosion, deposition, sea-level rise, and dredging activities; predictions also include the results of scenario-based models of bathymetry changes under different management strategies."
        },
        {
            "thcode": 61,
            "code": "450",
            "name": "aerial and satellite photography",
            "scope": "used for vertical or oblique photography of the Earth taken from aircraft or satellites; do not use for air-to-air photography."
        },
        {
            "thcode": 61,
            "code": "447",
            "name": "altimetry",
            "scope": "used for all instruments and techniques that determine altitude, either directly or remotely, including (but not limited to) pressure altimeters, radar altimeters, GPS, and LIDAR."
        },
        {
            "thcode": 61,
            "code": "452",
            "name": "orthophotography",
            "scope": "aerial photography corrected for distortion (\"orthorectified\") to create an image with uniform scale."
        },
        {
            "thcode": 61,
            "code": "445",
            "name": "photography",
            "scope": "limited to photography for scientific purposes."
        },
        {
            "thcode": 61,
            "code": "449",
            "name": "remote sensing",
            "scope": "generally used for the acquisition of images or other data from aircraft or satellites; also used for ground-based systems for collecting data at a distance."
        }
    ],
    "place_term": [],
    "image": [],
    "fan": [
        "2021-632-FA"
    ]
}