{
    "tag": 11452,
    "title": "rm10cct03_mb_50m.tif: 50-m interpolated bathymetry grid of the entire survey from USGS Cruise 10cct03",
    "pubdate": "20111001",
    "sername": null,
    "series_name": null,
    "issue": "DS671",
    "publish": null,
    "publisher_name": null,
    "onlink": "https:\/\/cmgds.marine.usgs.gov\/catalog\/spcmsc\/ds-671metadata_bathygrid.faq.html",
    "format": null,
    "email": null,
    "descript": "In April of 2010, the U.S. Geological Survey (USGS) conducted a geophysical survey from the east end of West Ship Island, MSiss., extending to the middle of Dauphin Island, Ala. This survey had a dual purpose: (1) to interlink previously conducted nearshore geophysical surveys (shoreline to ~2 kilometers, km) with those of offshore surveys (~2 km to ~9 km) in the ares and (2) to extend the geophysical survey to include a portion of the Dauphin Island nearshore zone. The efforts were part of the USGS Gulf of Mexico Science Coordination partnership with the U.S. Army Corps of Engineers (USACE) to assist the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazards Susceptibility Project by mapping the shallow geological stratigraphic framework of the Mississippi Barrier Island Complex.",
    "lang": null,
    "journal": null,
    "pwid": null,
    "originator": [
        {
            "name": "U.S. Geological Survey",
            "role": "Author"
        },
        {
            "name": "DeWitt, Nancy T.",
            "role": "Author"
        },
        {
            "name": "Flocks, James G.",
            "role": "Author"
        },
        {
            "name": "Pfeiffer, William R.",
            "role": "Author"
        },
        {
            "name": "Gibson, James N.",
            "role": "Author"
        },
        {
            "name": "Wiese, Dana S.",
            "role": "Author"
        }
    ],
    "index_term": [
        {
            "thcode": 2,
            "code": "80",
            "name": "bathymetry",
            "scope": "The elevation of the earth's surface beneath a body of water, especially the ocean, typically determined by measurements of depth from the water surface."
        },
        {
            "thcode": 2,
            "code": "82",
            "name": "bathymetry measurement",
            "scope": "Means of determining the depth to the floor of a body of water, especially the ocean."
        },
        {
            "thcode": 2,
            "code": "707",
            "name": "marine geophysics",
            "scope": "Branch of earth sciences concerned with the physical processes of the oceans and continental margins.  We include here studies of large bodies of brackish and fresh water, such as lakes and rivers."
        },
        {
            "thcode": 2,
            "code": "2036",
            "name": "multibeam sonar",
            "scope": "Acoustic technique for determining depths or creating backscatter imagery in a wide swath of seafloor or lakebed centered below the instrument platform."
        },
        {
            "thcode": 15,
            "code": "006",
            "name": "elevation",
            "scope": "Height above or below sea level, for example altitude, bathymetry, digital elevation models, slope, derived products, DEMs, TINs"
        },
        {
            "thcode": 15,
            "code": "013",
            "name": "location",
            "scope": "Positional information and services, for example addresses, geodetic networks, geodetic control points, postal zones and services, place names, geographic names"
        },
        {
            "thcode": 15,
            "code": "014",
            "name": "oceans",
            "scope": "Features and characteristics of salt water bodies (excluding inland waters), for example tides, tidal waves, coastal information, reefs, maritime, outer continental shelf submerged lands, shoreline"
        },
        {
            "thcode": 23,
            "code": "22",
            "name": "Bathymetry and Elevation",
            "scope": "Includes measures of the height of a location above or below a reference surface. Bathymetry is the elevation of the Earth's surface beneath a body of water, especially the ocean, typically determined by measurements of depth from the water surface at mean lower low water. Distributions are topographic maps and bathymetric charts based on collected data and also include smoothed or gridded maps of bathymetry and elevation from observational data or other associated factors. Assessment data types include models of ecological value, economic value, or current rates of alterations due to erosion, accretion, climate change, and other stressors (for example, wetland habitat loss). Predictions are the results of models or projections of future distributions, values, or ecological impacts of bathymetry, including predicted changes due to natural and human forces such as erosion, deposition, sea-level rise, and dredging activities; predictions also include the results of scenario-based models of bathymetry changes under different management strategies."
        },
        {
            "thcode": 23,
            "code": "3",
            "name": "Distributions",
            "scope": "Locations or patterns of a feature of interest across space and (or) time. These data can include point data, lines, polygons, and temporal data at any scale relevant to CMSP and can be produced by observation, interpolation, or modeling. Distributions can also include maps or statistics of climatology, the environmental values that are expected to be observed at the present time."
        },
        {
            "thcode": 61,
            "code": "738",
            "name": "marine geophysics",
            "scope": "used for geophysical and related studies of ocean basins and margins."
        },
        {
            "thcode": 61,
            "code": "402",
            "name": "multibeam echo sounder",
            "scope": "acoustic technique for determining sea-floor depths in a wide swath centered below the instrument platform."
        }
    ],
    "place_term": [],
    "image": [],
    "fan": [
        "10CCT01",
        "10CCT02",
        "10CCT03"
    ]
}