Metadata: Identification_Information: Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 19970430 Title: Bathymetry of the Bering Strait: Chukotka to Diomede Island Geospatial_Data_Presentation_Form: vector digital data Publication_Information: Publication_Place: Anchorage, Alaska Publisher: U.S. Geological Survey Other_Citation_Details: Citation of the source map: Hopkins, D. M., C. H. Nelson, R. B. Perry, and T. R. Alpha. 1976. Physiographic subdivisions of the Chirikov Basin, Northern Bering Sea (studies on the marine geology of the Bering Sea). Geological Survey Professional Paper 759-B. U.S. Government Printing Office. 7pp. 3 plates. Online_Linkage: https://cmgds.marine.usgs.gov/data/walrus/berstrat.zip Description: Abstract: The bathymetric map of the northern Bering Sea region, plate 1 of USGS Professional Paper 759-B, 1976, was generated using published National Ocean Service maps and an unpublished map from Univ. of Washington. The region covered by the map includes the eastern tip of the Chukotka Peninsula, Russia, east to the Seward Peninsula and northern Yukon Delta, Alaska, and south to St. Lawrence Island, Alaska. The portion digitized was west of the Exclusive Economic Zone (EEZ, or Convention Line of 1867). Only the Russian side of the map was included in the coverage because better data were available for the U.S. side of region from the National Ocean Service, National Geophysical Data Center. Purpose: The map was produced with Prof. Paper 759-B to show the diverse topography and complex relief of the sea floor in the Bering Strait and Chirkov Basin areas, and display the relief for future geophysical studies. The Russian side of the map was digitized because bathymetric data for Russia are difficult to find. Supplemental_Information: The USGS Alaska Science Center created this and other digital bathymetry coverages to support marine animal research in the Bering and Chukchi Seas. The completed coverages are being stored on the Coastal and Marine Geoscience Data System (CMGDS) for archival purposes only. The coverage "Bathymetry of the Bering Strait: Chukotka to Diomede Island" is titled BERSTRAT_3GEO (berstrat=bering strait, 3=polygon topology, geo=geographic projection) Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1976 Currentness_Reference: map publication date Status: Progress: Complete Maintenance_and_Update_Frequency: None Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -173 East_Bounding_Coordinate: -169 North_Bounding_Coordinate: 67 South_Bounding_Coordinate: 64 Keywords: Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:41e77b48-6a66-40e3-ba50-4e8aeb472c92 Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: geoscientificInformation Theme_Keyword: oceans Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: contours Theme: Theme_Keyword_Thesaurus: Data Categories for Marine Planning Theme_Keyword: distributions Theme_Keyword: bathymetry and elevation Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: bathymetry Theme_Keyword: contouring Theme_Keyword: computational methods Place: Place_Keyword_Thesaurus: None Place_Keyword: Chukotka Peninsula Place_Keyword: northeast Russia Place_Keyword: Arctic Ocean Place_Keyword: Bering Strait Access_Constraints: None Use_Constraints: Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the originator of the dataset. Data are not to be used for navigation. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Alaska Science Center, Marine and Fresh Water Ecology Branch Contact_Address: Address_Type: mailing and physical Address: Biological Resources Division, U.S. Geological Survey Address: 1011 E. Tudor Road City: Anchorage State_or_Province: Alaska Postal_Code: 99503 Country: USA Contact_Voice_Telephone: 907-786-3512 Contact_Facsimile_Telephone: 907-786-3636 Hours_of_Service: 8:00 am to 4:00pm Monday through Friday Contact_Instructions: None Native_Data_Set_Environment: Esri Arc/INFO 7.1 Cross_Reference: Citation_Information: Originator: National Ocean Service Originator: U.S. Department of Commerce Publication_Date: Unknown Title: Coastal Shelf Bathymetry of the Bering, Chukchi, and Beaufort Seas Geospatial_Data_Presentation_Form: Map Publication_Information: Publication_Place: Washington, D.C. Publisher: Department of Commerce, NOAA, NOS Other_Citation_Details: Bathymetric maps available for purchase from National Geophysical Data Center, E/GC3, 325 Broadway, Boulder, Colorado 80303-3228. Cross_Reference: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 1988 Title: Bathymetric Map of the Bowers Basin and Aleutian Basin east of the U.S.-U.S.S.R. 1867 Convention Line, Bering Sea Geospatial_Data_Presentation_Form: Map Series_Information: Series_Name: Open-File Report Issue_Identification: 89-548 Publication_Information: Publication_Place: Menlo Park, CA Publisher: U.S. Geological Survey Other_Citation_Details: Hall, R.K., Karl, H.A., Carlson, P.R., Cooper, A.K., Gardner, J..V., Hunter, R.E., Marlow, M.S., and Stevenson, A.J., 1989, Bathymetric map of the Aleutian Basin and Bowers Basin east of the U.S.-U.S.S.R. 1867 Convention Line, Bering Sea: U.S. Geological Survey Open-File Report 89-548, 6 pp, 1 map, scale 1:2,000,000. Cross_Reference: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 1984 Title: Bathymetric map of the Chukchi Sea Geospatial_Data_Presentation_Form: Map Series_Information: Series_Name: Miscellaneous Investigations Series Issue_Identification: Map I-1182-D Publication_Information: Publication_Place: Washington, D.C. Publisher: U.S. Geological Survey Other_Citation_Details: Hill, E.R., Grantz, A., May, S.D., and Smith, M., 1984, Bathymetric map of the Chukchi Sea: U.S. Geological Survey, Miscellaneous Investigations Series I-1182-D. Cross_Reference: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 1976 Title: Bathymetric Map of the Chukchi Sea and Arctic Ocean & bathymetric Map of the Aleutian Trench and Bering Sea Geospatial_Data_Presentation_Form: Map Series_Information: Series_Name: Open-File Report Issue_Identification: 76-821 and 76-823 Publication_Information: Publication_Place: Washington, D.C. Publisher: U.S. Geological Survey Other_Citation_Details: Schumacher, G.M., 1976, Bathymetric map of the Chukchi Sea and Arctic Ocean: USGS Open-File Report 76-823. -and- Schumacher, G.M. 1976, Bathymetric map of the Aleutian Trench and Bering Sea: USGS Open-File Report 76-821. Cross_Reference: Citation_Information: Originator: Geological Society of America Publication_Date: 1974 Title: Bathymetric Map of the Bering Sea Geospatial_Data_Presentation_Form: Map Publication_Information: Publication_Place: Boulder, CO Publisher: Geological Society of America Other_Citation_Details: Pratt, R., and Walton, F., 1974, Bathymetric map of the Bering Sea: The Geological Society of America, Boulder, CO. Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: Attribute accuracy was tested by manually comparing hard copy plots to the source map. Accuracy of the source map is related to the contouring algorithm used to derive the contours, quality of the data used to generate contours, and changes in bathymetry since the data were collected. Logical_Consistency_Report: All polygon features are checked for topology using Arc/INFO software. Each polygon begins and ends with a node feature. All nodes are checked for errors so that there are no dangling features. There are no duplicate lines or polygons. All nodes will snap together and close polygons based on a specified tolerance. if the node is not within tolerance it is adjusted manually. The tests for logical consistency are performed in Arc/INFO. Completeness_Report: Contours were digitized at 10 meter intervals from the coastline and islands (0 meters) to 50 meters. Intermediate contours at 2 meter intervals were not digitized. The coverage ends at the EEZ (Convention Line of 1867). The coastline from the map was digitized with the bathymetry, because the resolution of the map was much higher than digital coastlines available for the Chukotka Peninsula. The coverage stops at the EEZ instead of completing the Bering Strait because higher resolution data were available for the region east of the EEZ. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Horizontal positional accuracy was tested using Arc/INFO's RMS errors generated when the map is converted from table inches to real world coordinates. A mean RMS error of 0.003 was maintained by registering each 1 x 1 degree area prior to digitizing. When overlayed with lower resolution coastlines for the Chukotka Peninsula the digitized coastline and bathymetry follow closely, but are obviously of higher resolution. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 1976 Title: Plate 1. Topographic and Bathymetric map of the Northern Bering Sea Region Series_Information: Series_Name: U.S. Geological Survey Professional Paper Issue_Identification: 759-B Publication_Information: Publication_Place: Washington, D.C. Publisher: U.S. Government Printing Office Other_Citation_Details: Hopkins, D.M., Nelson, C.H., Perry, R.B., and Alpha, T.R., 1976, Physiographic subdivisions of the Chirikov Basin, Northern Bering Sea (studies on the marine geology of the Bering Sea): Geological Survey Professional Paper 759-B, U.S. Government Printing Office, 7 pp, 3 plates. Source_Scale_Denominator: 1000000 Type_of_Source_Media: Paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1976 Source_Currentness_Reference: Publication date Source_Citation_Abbreviation: USGS_berstrat Source_Contribution: The map provided the bathymetric contours for the digitized vector data Process_Step: Process_Description: A tic base was created using the generate command with the fishnet option (in Arc/INFO) to generate a latitude and longitude grid in geographic projection. The tic base was then projected into Lambert Conformal Conic (projection of source map) and used to register the map on the digitizer. Standard parallels of 55 N and 65 N were supplied on the source map, a central meridian of -166 proved to have the least amount of error within the digitized region of the map. The Russian portion of the map was hand digitized, including the coastline. Each 1 x 1 degree block was registered prior to digitizing to minimize errors. Processing tolerances were: weed 35 meters, grain 35 meters, dangle 0.1 meters, and fuzzy 0.1 meters. Note that these tolerances are in meters and the completed coverage is in geographic projection. THESE TOLERANCES SHOULD BE SPECIFIED IN ANY FUTURE BUILD OR CLEAN TO MAINTAIN THE INTEGRITY OF THE COVERAGE. Source_Used_Citation_Abbreviation: USGS_berstrat Process_Date: 199609 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Alaska Science Center, Marine and Fresh Water Ecology Branch Contact_Address: Address_Type: mailing and physical Address: Biological Resources Division, U.S. Geological Survey Address: 1011 E. Tudor Road City: Anchorage State_or_Province: Alaska Postal_Code: 99503 Country: USA Contact_Voice_Telephone: 907-786-3512 Contact_Facsimile_Telephone: 907-786-3636 Hours_of_Service: 8:00 am to 4:00pm Monday through Friday Contact_Instructions: None Process_Step: Process_Description: Keywords section of metadata optimized for discovery in USGS Coastal and Marine Geology Data Catalog. Process_Date: 20170214 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Alan O. Allwardt Contact_Position: Contractor -- Information Specialist Contact_Address: Address_Type: mailing and physical address Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-7551 Contact_Facsimile_Telephone: 831-427-4748 Contact_Electronic_Mail_Address: aallwardt@usgs.gov Process_Step: Process_Description: Edited metadata to add keywords section with USGS persistent identifier as theme keyword. No data were changed. Process_Date: 20201019 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: VeeAnn A. Cross Contact_Position: Marine Geologist Contact_Address: Address_Type: Mailing and Physical Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2251 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: vatnipp@usgs.gov Process_Step: Process_Description: Edited metadata to fix validation errors and to bring it up to FGDC CSDGM current standards based on data release policies for USGS Coastal and Marine Hazards and Resources Program (CMHRP). No data were changed. The metadata available from a harvester may supersede metadata bundled within a download file. Users are advised to compare the metadata dates to determine which metadata file is most recent. Process_Date: 20211118 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Susan Cochran Contact_Position: Geologist Contact_Address: Address_Type: Mailing and Physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-7545 Contact_Electronic_Mail_Address: scochran@usgs.gov Spatial_Data_Organization_Information: Indirect_Spatial_Reference: Bathymetric contours Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: String Point_and_Vector_Object_Count: 120 SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Entity point Point_and_Vector_Object_Count: 44 SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains Point_and_Vector_Object_Count: 44 SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Entity point Point_and_Vector_Object_Count: 1 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 2.6573761715553701e-005 Longitude_Resolution: 2.6573761715553701e-005 Geographic_Coordinate_Units: Decimal Degrees Geodetic_Model: Horizontal_Datum_Name: D Clarke 1866 Ellipsoid_Name: Clarke 1866 Semi-major_Axis: 6378206.4 Denominator_of_Flattening_Ratio: 294.9786982 Vertical_Coordinate_System_Definition: Depth_System_Definition: Depth_Datum_Name: Mean Sea Level Depth_Resolution: 10 Depth_Distance_Units: meters Depth_Encoding_Method: Attribute values Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: berstrat_3geo.aat Entity_Type_Definition: Bering Strait Bathymetry Arc Attribute Table (arcs) Entity_Type_Definition_Source: USGS; ESRI Attribute: Attribute_Label: FID Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: Shape Attribute_Definition: Feature geometry. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Coordinates defining the features. Attribute: Attribute_Label: FNODE# Attribute_Definition: Internal node number for the beginning of an arc (from-node). Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Whole numbers that are automatically generated. Attribute: Attribute_Label: TNODE# Attribute_Definition: Internal node number for the end of an arc (to-node). Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Whole numbers that are automatically generated. Attribute: Attribute_Label: LPOLY# Attribute_Definition: Internal node number for the left polygon. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Whole numbers that are automatically generated. Attribute: Attribute_Label: RPOLY# Attribute_Definition: Internal node number for the right polygon. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Whole numbers that are automatically generated. Attribute: Attribute_Label: LENGTH Attribute_Definition: Length of feature in internal units. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: BERSTRAT# Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: BERSTRAT-ID Attribute_Definition: User-defined feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: DEPTH Attribute_Definition: Depth in meters below sea level for each contour. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 20 Range_Domain_Maximum: 8000 Attribute_Units_of_Measure: meters Attribute: Attribute_Label: CLASS Attribute_Definition: A categorical variable to define the line type. Attribute_Definition_Source: USGS Attribute_Domain_Values: Unrepresentable_Domain: Class=0 for digitized bathymetric contours; class=8 for arcs that were added to close polygons; and class=9 for the Russian and US/Canadian coastlines. There were 2 cases where class 8 arcs were used: (1) when contours ended because adjoining contours were too close, and (2) the box used as the perimeter of the coverage. Detailed_Description: Entity_Type: Entity_Type_Label: berstrat_3geo.pat Entity_Type_Definition: Bering Strait Bathymetry Polygon Attribute Table (polygons) Entity_Type_Definition_Source: USGS; ESRI Attribute: Attribute_Label: FID Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: Shape Attribute_Definition: Feature geometry. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Coordinates defining the features. Attribute: Attribute_Label: AREA Attribute_Definition: Area of feature in internal units squared. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: PERIMETER Attribute_Definition: Perimeter of feature in internal units. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Positive real numbers that are automatically generated. Attribute: Attribute_Label: BERSTRAT# Attribute_Definition: Internal feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: BERSTRAT-ID Attribute_Definition: User-defined feature number. Attribute_Definition_Source: ESRI Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that were automatically generated. Attribute: Attribute_Label: MID_DEPTH Attribute_Definition: Polygon attribute calculated as the mid-point between bounding arcs, e.g. mid-depth between 50 and 100 meter contours equals 75 meters, and between 4,000 and 4,400 meter contours is 4,200 meters. Where a bathymetric contour was an "island" and there was no further depth information inside the "island", the mid-depth was coded as the bounding contour's depth. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 25 Range_Domain_Maximum: 8000 Overview_Description: Entity_and_Attribute_Overview: The coverage contains two attributes pertinent for data analysis and display (depth and mid-depth), and one attribute that specifies line type (class). Depth is an arc attribute (.aat) that specifies the ocean depth at each contour in meters. Mid-depth is a polygon attribute (.pat) calculated from the depth values of each polygon's bounding contours (e.g. a polygon with bounding contours of 30 m and 40 m would be 35 m). Class displays the type of line, 0 for digitized bathymetric contours, 9 for the coastline, and 8 for arcs added to close polygons. Entity_and_Attribute_Detail_Citation: Producer Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: Alaska Science Center, Marine and Fresh Water Ecology Branch Contact_Address: Address_Type: Mailing and physical Address: 1011 E. Tudor Road City: Anchorage State_or_Province: Alaska Postal_Code: 99503 Country: USA Contact_Voice_Telephone: 907-786-3512 Contact_Facsimile_Telephone: 907-786-3636 Hours_of_Service: 8:00am to 4:00pm Monday through Friday Contact_Instructions: None Distribution_Liability: Although these data have been processed successfully on a computer system at the U.S. Geological Survey (USGS) no warranty expressed or implied is made regarding the accuracy or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data. It is strongly recommended that these data are directly acquired from USGS server, and not indirectly through other sources which may have changed the data in some way. It is also strongly recommended that careful attention be paid to the contents of the metadata file associated with these data. The USGS shall not be held liable for improper or incorrect use of the data described and/or contained herein. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: ArcInfo Interchange Format_Version_Number: Version 7.1 File_Decompression_Technique: ArcInfo Interchange file (E00) and Zip (.zip) Transfer_Size: 0.149 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://cmgds.marine.usgs.gov/data/walrus/berstrat.zip Access_Instructions: Use internet browse or file manager application (such as Windows Explorer) to access the directory (http://cmgds.marine.usgs.gov/data/walrus/) and download berstrat.zip Fees: None, if obtained online. Metadata_Reference_Information: Metadata_Date: 20211115 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-427-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998