Metadata: Identification_Information: Citation: Citation_Information: Originator: Melissa M. Foley Publication_Date: 2017 Title: Sediment grain size in the Elwha River estuary, Washington, from 2013 and 2014. Geospatial_Data_Presentation_Form: comma-delimited text Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/F75B00N4 Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, California Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/F75B00N4 Online_Linkage: https://www.sciencebase.gov/catalog/file/get/58f51816e4b0f6ac3c40393b Larger_Work_Citation: Citation_Information: Originator: Melissa M. Foley Originator: Patrick B. Shafroth Originator: Matthew M. Beirne Originator: Rebecca Paradis Originator: Andrew C. Ritchie Publication_Date: 2017 Title: Ecological parameters in the Elwha River estuary before and during dam removal Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/F75B00N4 Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, CA Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/F75B00N4 Description: Abstract: This portion of the data release presents sediment grain-size data from samples collected in the Elwha River estuary, Washington, in July 2013 and June 2014 (USGS Field Activities L-15-13-PS and 2014-628-FA). Surface sediment was collected from one location in 2013 and five locations in 2014 using a using a push core. The locations of grab samples were determined with a hand-held global positioning system (GPS). The cores were split into one- to three-centimeter sections. The grain-size distributions of samples were determined using standard techniques developed by the USGS Pacific Coastal and Marine Science Center sediment lab. Size fractions are defined as gravel (greater than 2 mm), sand (63 micron to 2 mm), silt (4 micron to 63 micron), clay (less than 4 micron), and mud (less than 63 micron). The grain-size data are provided in a comma-delimited spreadsheet (.csv). Purpose: Data were obtained to assess the ecosystem response following the removal of two dams on the Elwha River between 2011 and 2014. Supplemental_Information: Additional information about the field activities from which these data were derived are available online at: https://cmgds.marine.usgs.gov/fan_info.php?fan=L1513PS https://cmgds.marine.usgs.gov/fan_info.php?fan=2014-628-FA Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20130701 Ending_Date: 20140610 Currentness_Reference: ground condition at time data were collected Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -123.56768 East_Bounding_Coordinate: -123.56135 North_Bounding_Coordinate: 48.14790 South_Bounding_Coordinate: 48.13583 Keywords: Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:58f51816e4b0f6ac3c40393b Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: oceans Theme: Theme_Keyword_Thesaurus: Data Categories for Marine Planning Theme_Keyword: substrate Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: sediment transport Theme_Keyword: grain-size analysis Theme: Theme_Keyword_Thesaurus: Global Change Master Directory (GCMD) Theme_Keyword: sedimentation Theme: Theme_Keyword_Thesaurus: Marine Realms Information Bank (MRIB) keywords Theme_Keyword: sediment Place: Place_Keyword_Thesaurus: Geographic Names Information System (GNIS) Place_Keyword: Elwha River Place_Keyword: Strait of Juan de Fuca Place_Keyword: Olympic Peninsula Place_Keyword: Clallam County Place_Keyword: State of Washington Access_Constraints: None Use_Constraints: USGS-authored or produced data and information are in the public domain from the U.S. Government and are freely redistributable with proper metadata and source attribution. Please recognize and acknowledge the U.S. Geological Survey as the originator(s) of the dataset and in products derived from these data. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USGS Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical address Address: 2885 Mission St City: Santa Cruz State_or_Province: CA Postal_Code: 95060-5792 Country: USA Contact_Voice_Telephone: 831-427-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Data_Set_Credit: Angela Tam, Michael Torresan Native_Data_Set_Environment: Microsoft Excel for Mac 2011, Mac OS X Yosemite, version 10.10.5. Cross_Reference: Citation_Information: Originator: Melissa M. Foley Originator: Jonathan A. Warrick Originator: Andrew C. Ritchie Originator: Andrew W. Stevens Originator: Patrick B. Shafroth Originator: Jeffrey J. Duda Originator: Matthew M. Beirne Originator: Rebecca Paradis Originator: Guy R. Gelfenbaum Originator: Randall McCoy Originator: Erin S. Cubley Publication_Date: 2017 Title: Coastal habitat and biological community response to dam removal on the Elwha River Publication_Information: Publication_Place: Ecological Society of America, Washington DC Publisher: Ecological Monographs Online_Linkage: http://doi.org/10.1002/ecm.1268 Cross_Reference: Citation_Information: Originator: Robert Louis Folk Originator: William C. Ward Publication_Date: 1957 Title: Brazos River bar; a study in the significance of grain size parameters Online_Linkage: https://doi.org/10.1306/74D70646-2B21-11D7-8648000102C1865D Cross_Reference: Citation_Information: Originator: Douglas Lamar Inman Publication_Date: 1952 Title: Measures for describing the size distribution of sediments Online_Linkage: https://doi.org/10.1306/D42694DB-2B26-11D7-8648000102C1865D Cross_Reference: Citation_Information: Originator: Parker D. Trask Publication_Date: 1930 Title: Mechanical analyses of sediments by centrifuge Online_Linkage: https://doi.org/10.2113/gsecongeo.25.6.581 Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: No formal attribute accuracy tests were conducted. Logical_Consistency_Report: No formal logical accuracy tests were conducted. Completeness_Report: Dataset is considered complete for the information presented, as described in the abstract. Users are advised to read the rest of the metadata record carefully for additional details. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: A formal accuracy assessment of the horizontal positional information in the data set has not been conducted. Lineage: Process_Step: Process_Description: Sediment was collected at one location in 2013 using a push core. A hand-held global positioning system was used to determine the location of the sampling location. Process_Date: 20130701 Process_Step: Process_Description: The grain-size distributions of samples were determined in the USGS Pacific Coastal and Marine Science Center sediment lab. Approximately 20 g of sediment was sub-sampled and 10 mL of 35 percent hydrogen peroxide was added to remove organic material in the sample. The sample was heated at 250 degrees C to remove any remaining hydrogen peroxide and was placed in an ultrasonic bath to liberate the fine fraction. Subsequently, the sample was centrifuged for 1.5 hours to remove soluble salts. Samples were funneled through 2 mm and 63 um sieves to separate the gravel (greater than 2 mm), sand (63 um to 2 mm), and mud (less than 63 um). The sand and gravel fractions were dried in an 80 degree C oven and weighed. Five mL of sodium hexametaphosphate was added to the mud fraction and a 20 mL aliquot was taken from a 1 L graduated cylinder to determine the weight of the mud. The particle-size distribution of the mud and sand fractions was analyzed separately using a Beckman Coulter LS 13 320, and the gravel, sand, and mud results were integrated into a single grain-size distribution for each sample. Process_Date: 20140204 Process_Step: Process_Description: Sediment was collected at five locations in 2014 using a push core. A hand-held global positioning system was used to determine the location of the sampling locations. Process_Date: 20140609 Process_Step: Process_Description: The grain-size distributions of samples were determined in the USGS Pacific Coastal and Marine Science Center sediment lab. Approximately 20 g of sediment was sub-sampled and 10 mL of 35 percent hydrogen peroxide was added to remove organic material in the sample. The sample was heated at 250 degrees C to remove any remaining hydrogen peroxide and was placed in an ultrasonic bath to liberate the fine fraction. Subsequently, the sample was centrifuged for 1.5 hours to remove soluble salts. Samples were funneled through 2 mm and 63 um sieves to separate the gravel (greater than 2 mm), sand (63 um to 2 mm), and mud (less than 63 um). The sand and gravel fractions were dried in an 80 degree C oven and weighed. Five mL of sodium hexametaphosphate was added to the mud fraction and a 20 mL aliquot was taken from a 1 L graduated cylinder to determine the weight of the mud. The particle-size distribution of the mud and sand fractions was analyzed separately using a Beckman Coulter LS 13 320, and the gravel, sand, and mud results were integrated into a single grain-size distribution for each sample. Process_Date: 20161118 Process_Step: Process_Description: Edited metadata to add keywords section with USGS persistent identifier as theme keyword. No data were changed. Process_Date: 20201019 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: VeeAnn A. Cross Contact_Position: Marine Geologist Contact_Address: Address_Type: Mailing and Physical Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2251 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: vatnipp@usgs.gov Process_Step: Process_Description: Performed minor edits to the metadata to correct typos. No data were changed Process_Date: 20211013 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Susan A. Cochran Contact_Position: Geologist Contact_Address: Address_Type: Mailing and Physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-7545 Contact_Electronic_Mail_Address: scochran@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Point Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point Point_and_Vector_Object_Count: 28 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 0.00001 Longitude_Resolution: 0.00001 Geographic_Coordinate_Units: Decimal degrees Geodetic_Model: Horizontal_Datum_Name: WGS_1984 Ellipsoid_Name: WGS_1984 Semi-major_Axis: 6378137.0 Denominator_of_Flattening_Ratio: 298.257223563 Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: Grain-size Entity_Type_Definition: Tabular data Entity_Type_Definition_Source: Producer defined Attribute: Attribute_Label: Field Activity Number Attribute_Definition: Unique U.S. Geological Survey field activity identifier Attribute_Definition_Source: producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique identifier for the U.S. Geological Survey field activity Attribute: Attribute_Label: Sample ID Attribute_Definition: Name of sample Attribute_Definition_Source: producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique identifier for the sample given when collected in the field Attribute: Attribute_Label: Latitude (deg. N) Attribute_Definition: Latitude of sample in decimal degrees, north Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 48.13583 Range_Domain_Maximum: 48.14790 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Longitude (deg. E) Attribute_Definition: Longitude of sample in decimal degrees, east Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -123.56135 Range_Domain_Maximum: -123.56768 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Date Collected Attribute_Definition: Date of sample collection in mm/dd/yyyy format Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 07/01/2013 Range_Domain_Maximum: 06/10/2014 Attribute_Units_of_Measure: Dates in mm/dd/yyyy format Attribute: Attribute_Label: Time (GMT) Attribute_Definition: Time of sample collection in HH:SS format relative to Greenwich Mean Time (GMT). Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 15:35 Range_Domain_Maximum: 20:10 Attribute_Units_of_Measure: Times in HH:SS format Attribute: Attribute_Label: Core section Attribute_Definition: Section of core analyzed Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0-1 Range_Domain_Maximum: 42-44 Attribute_Units_of_Measure: centimeters from the top of the core Attribute: Attribute_Label: Sample Type Attribute_Definition: Type of sample collected Attribute_Definition_Source: producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Push core Enumerated_Domain_Value_Definition: Sample collected with push core Enumerated_Domain_Value_Definition_Source: Producer defined Attribute: Attribute_Label: Lab ID Attribute_Definition: Samples collected in 2013 are identified at FFFFFFF_XX, where FFFFFFF is the 7-digis field activity number (FAN) ID code, and XX is a sequential number given to the sample in the lab. Samples collected in 2014 are identified as PP-YY-FFFFF-XX, where PP is the 2-digit year the sample was analyzed (for example 16=2016), YY is the 2-digit year the sample was collected, FFFFF is the last 5-digits of the field activity number ID code, and XX is a sequential number given to the sample in the lab. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique identifier for the sample given during analysis in the lab Attribute: Attribute_Label: Wt. percent in -2.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter greater than -2.00. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in -1.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between -2.00 and -1.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in -0.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between -1.00 and -0.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in -0.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between -0.75 and -0.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in -0.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between -0.50 and -0.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 0.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between -0.25 and 0.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 0.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 0.00 and 0.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 0.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 0.25 and 0.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 0.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 0.50 and 0.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 1.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 0.75 and 1.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 1.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 1.00 and 1.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 1.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 1.25 and 1.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 1.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 1.50 and 1.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 2.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 1.75 and 2.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 2.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 2.00 and 2.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 2.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 2.25 and 2.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 2.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 2.50 and 2.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 3.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 2.75 and 3.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 3.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 3.00 and 3.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 3.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 3.25 and 3.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 3.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 3.50 and 3.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 4.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 3.75 and 4.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 4.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 4.00 and 4.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 4.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 4.25 and 4.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 4.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 4.50 and 4.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 5.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 4.75 and 5.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 5.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 5.00 and 5.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 5.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 5.25 and 5.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 5.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 5.50 and 5.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 6.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 5.75 and 6.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 6.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 6.00 and 6.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 6.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 6.25 and 6.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 6.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 6.50 and 6.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 7.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 6.75 and 7.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 7.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 7.00 and 7.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 7.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 7.25 and 7.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 7.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 7.50 and 7.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 8.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 7.75 and 8.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 8.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 8.00 and 8.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 8.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 8.25 and 8.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 8.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 8.50 and 8.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 9.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 8.75 and 9.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 9.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 9.00 and 9.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 9.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 9.25 and 9.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 9.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 9.50 and 9.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 10.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 9.75 and 10.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 10.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 10.00 and 10.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 10.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 10.25 and 10.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 10.75 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 10.50 and 10.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 11.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 10.75 and 11.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 11.25 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 11.00 and 11.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 11.50 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 11.25 and 11.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 12.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 11.50 and 12.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Wt. percent in 13.00 phi bin Attribute_Definition: Weight percent of sample with grain diameter between 12.00 and 13.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Percent Gravel Attribute_Definition: Percent of sample greater than 2 mm. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Percent Sand Attribute_Definition: Percent of sample less than 2 mm and greater than 63 microns. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Percent Silt Attribute_Definition: Percent of sample less than 63 microns and greater than 4 microns. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Percent Clay Attribute_Definition: Percent of sample less than 4 microns. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Percent Mud Attribute_Definition: Percent of sample less than 63 microns. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: D5 Phi Attribute_Definition: Phi size at D5 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -4 Range_Domain_Maximum: 13 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-3 Attribute: Attribute_Label: D10 Phi Attribute_Definition: Phi size at D10 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -4 Range_Domain_Maximum: 13 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-3 Attribute: Attribute_Label: D16 Phi Attribute_Definition: Phi size at D16 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -4 Range_Domain_Maximum: 13 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-3 Attribute: Attribute_Label: D25 Phi Attribute_Definition: Phi size at D25 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -4 Range_Domain_Maximum: 13 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-3 Attribute: Attribute_Label: D50 Phi Attribute_Definition: Phi size at D50 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -4 Range_Domain_Maximum: 13 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-3 Attribute: Attribute_Label: D75 Phi Attribute_Definition: Phi size at D75 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -4 Range_Domain_Maximum: 13 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-3 Attribute: Attribute_Label: D84 Phi Attribute_Definition: Phi size at D84 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -4 Range_Domain_Maximum: 13 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-3 Attribute: Attribute_Label: D90 Phi Attribute_Definition: Phi size at D90 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -4 Range_Domain_Maximum: 13 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-3 Attribute: Attribute_Label: D95 Phi Attribute_Definition: Phi size at D95 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -4 Range_Domain_Maximum: 13 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-3 Attribute: Attribute_Label: F-W Median Attribute_Definition: Phi size median for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.235832 Range_Domain_Maximum: 7.202429 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: F-W Mean Attribute_Definition: Phi size mean for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.899815 Range_Domain_Maximum: 7.352718 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: F-W Sorting Attribute_Definition: Sorting for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.270643 Range_Domain_Maximum: 2.467434 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: F-W Skewness Attribute_Definition: Skewness for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.296635 Range_Domain_Maximum: 0.581995 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: F-W Kurtosis Attribute_Definition: Kurtosis for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.887895 Range_Domain_Maximum: 1.603556 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Inman Median Attribute_Definition: Phi size median for sample by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.23832 Range_Domain_Maximum: 7.202429 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Inman Mean Attribute_Definition: Phi size mean for sample by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4.231806 Range_Domain_Maximum: 7.427862 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Inman Sorting Attribute_Definition: Sorting for sample by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.214712 Range_Domain_Maximum: 2.41976 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Inman Skew 16-84 Attribute_Definition: Skewness for sample (D16-84) by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.217451 Range_Domain_Maximum: 0.56562 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Inman Skewness 05-95 Attribute_Definition: Skewness for sample (D5-D95) by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.823404 Range_Domain_Maximum: 1.065633 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Inman Kurtosis Attribute_Definition: Kurtosis for sample by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.561406 Range_Domain_Maximum: 1.190959 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Trask Median Attribute_Definition: Median for sample by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00679 Range_Domain_Maximum: 0.106149 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Trask Mean Attribute_Definition: MEan for sample by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.007343 Range_Domain_Maximum: 0.099793 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Trask Sorting Attribute_Definition: Sorting for sample by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.734801 Range_Domain_Maximum: 3.243552 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Trask Skewness Attribute_Definition: Skewness for sample by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.499144 Range_Domain_Maximum: 1.274804 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Trask Kurtosis Attribute_Definition: Kurtosis for sample by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.02603 Range_Domain_Maximum: 0.291524 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Mean Phi Attribute_Definition: Moment 1 measure of mean in phi Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.926387 Range_Domain_Maximum: 7.389967 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Mean mm Attribute_Definition: Moment 1 measure of mean in mm Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.005962 Range_Domain_Maximum: 0.065772 Attribute_Units_of_Measure: millimeter Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Variance Phi Attribute_Definition: Moment 2 measure of variance Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.63064 Range_Domain_Maximum: 6.640921 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Std. Dev. Phi Attribute_Definition: Standard deviation Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.276965 Range_Domain_Maximum: 2.576998 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Skewness Phi Attribute_Definition: Moment 3 measure of skewness Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.005589 Range_Domain_Maximum: 1.478336 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Attribute: Attribute_Label: Kurtosis Phi Attribute_Definition: Moment 4 measure of kurtosis Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.581778 Range_Domain_Maximum: 4.598639 Attribute_Units_of_Measure: Phi size Attribute_Measurement_Resolution: 1.0E-6 Overview_Description: Entity_and_Attribute_Overview: The first line of the csv file is a header line. Entity_and_Attribute_Detail_Citation: U.S. Geological Survey Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey - ScienceBase Contact_Address: Address_Type: mailing and physical Address: Denver Federal Center, Building 810, Mail Stop 302 City: Denver State_or_Province: CO Postal_Code: 80225 Contact_Voice_Telephone: 1-888-275-8747 Contact_Electronic_Mail_Address: sciencebase@usgs.gov Resource_Description: Grain-size data are presented as a comma-delimited file (.csv) along with FGDC-compliant metadata. Distribution_Liability: Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: comma-delimited text Format_Version_Number: Microsoft Excel for Mac 2011 14.7.1 Format_Information_Content: comma-delimited text file File_Decompression_Technique: No compression applied. Transfer_Size: 0.08 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/58f51816e4b0f6ac3c40393b Network_Resource_Name: https://doi.org/10.5066/F75B00N4 Access_Instructions: Data can be downloaded via the Internet Fees: None. Metadata_Reference_Information: Metadata_Date: 20211013 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USGS Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical address Address: 2885 Mission St City: Santa Cruz State_or_Province: CA Postal_Code: 95060-5792 Country: USA Contact_Voice_Telephone: 831-427-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998