Metadata: Identification_Information: Citation: Citation_Information: Originator: Joshua B. Logan Originator: Amy E. East Publication_Date: 20240807 Title: Orthomosaic images from UAS surveys of the upper reservoir delta at Jenkinson Lake, El Dorado County, California Geospatial_Data_Presentation_Form: GeoTIFF Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P14QWDYN Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, California Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/P14QWDYN Online_Linkage: https://www.sciencebase.gov/catalog/item/667c598cd34e828a20a696d8 Online_Linkage: https://doi.org/10.5066/P14QWDYN Larger_Work_Citation: Citation_Information: Originator: Joshua B. Logan Originator: Amy E. East Publication_Date: 2024 Title: Digital Surface Models and orthomosaic images from UAS surveys of Jenkinson Lake, El Dorado County, CA Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P14QWDYN Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, CA Publisher: U.S. Geological Survey Other_Citation_Details: Suggested Citation: Logan, J.B. and East A.E., 2024, Digital Surface Models and orthomosaic images from UAS surveys of Jenkinson Lake, El Dorado County, CA: U.S. Geological Survey data release, https://doi.org/10.5066/P14QWDYN. Online_Linkage: https://doi.org/10.5066/P14QWDYN Description: Abstract: This portion of the data release presents high-resolution orthomosaic images of the Jenkinson Lake upper reservoir delta in El Dorado County, California. The orthomosaics have resolutions of 2.5 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected during surveys with unoccupied aerial systems (UAS). The surveys were on 2021-10-13, 2021-11-04, 2022-10-25, and 2023-11-13, and were generally timed to coincide with low water level in the reservoir to maximize sub-aerial coverage. The raw imagery used to create the orthomosaics was acquired with a UAS quadcopter fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines, from an approximate altitude of 100 meters above ground level (AGL), resulting in a nominal ground-sample-distance (GSD) of 2.6 centimeters per pixel. The raw imagery was geotagged using positions from the UAS onboard single-frequency autonomous GPS. Survey control was established using temporary ground control points (GCPs) consisting of a combination of small square tarps with black-and-white cross patterns and temporary chalk marks placed on the ground. The GCP positions were measured using dual-frequency real-time kinematic (RTK) GPS with corrections referenced to a static base station operating nearby. The images and GCP positions were used for structure-from-motion (SfM) processing to create topographic point clouds, high-resolution orthomosaic images, and DSMs. The orthomosaic images are provided in a three-band RGB format, with 8-bit unsigned integer values compressed using high-quality JPEG compression, and are formatted as cloud optimized GeoTIFFs with internal overviews and masks to facilitate cloud-based queries and display. Purpose: These data were obtained to measure potential sediment inputs into the reservoir following the Caldor Fire in 2021. These data are intended for science researchers, students, policy makers, and the general public. These data can be used with geographic information systems or other software to identify topographic features on the sub-aerially exposed portions of the reservoir delta. Supplemental_Information: Additional information about the field activities from which these data were derived is available online at: https://cmgds.marine.usgs.gov/fan_info.php?fan=2021-655-FA https://cmgds.marine.usgs.gov/fan_info.php?fan=2021-659-FA https://cmgds.marine.usgs.gov/fan_info.php?fan=2022-666-FA https://cmgds.marine.usgs.gov/fan_info.php?fan=2023-678-FA Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Time_Period_of_Content: Time_Period_Information: Multiple_Dates/Times: Single_Date/Time: Calendar_Date: 20211013 Single_Date/Time: Calendar_Date: 20211104 Single_Date/Time: Calendar_Date: 20221025 Single_Date/Time: Calendar_Date: 20231113 Currentness_Reference: ground condition at time data were collected Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -120.54202 East_Bounding_Coordinate: -120.52718 North_Bounding_Coordinate: 38.73757 South_Bounding_Coordinate: 38.73085 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: elevation Theme_Keyword: geoscientificInformation Theme: Theme_Keyword_Thesaurus: Data Categories for Marine Planning Theme_Keyword: Bathymetry and Elevation Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: topography Theme_Keyword: topographic maps Theme_Keyword: remote sensing Theme_Keyword: geomorphology Theme_Keyword: aerial photography Theme_Keyword: image mosaics Theme_Keyword: geospatial datasets Theme_Keyword: fires Theme: Theme_Keyword_Thesaurus: Marine Realms Information Bank (MRIB) keywords Theme_Keyword: photography Theme_Keyword: remote sensing Theme_Keyword: aerial and satellite photography Theme_Keyword: altimetry Theme_Keyword: orthophotography Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: U.S. Geological Survey Theme_Keyword: USGS Theme_Keyword: Coastal and Marine Hazards and Resources Program Theme_Keyword: CHMRP Theme_Keyword: Pacific Coastal and Marine Science Center Theme_Keyword: PCMSC Theme_Keyword: UAS Theme_Keyword: Unmanned aerial system Theme_Keyword: Structure-from-motion Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:667c598cd34e828a20a696d8 Place: Place_Keyword_Thesaurus: Geographic Names Information System (GNIS) Place_Keyword: State of California Place_Keyword: El Dorado County Place_Keyword: Jenkinson Lake Place_Keyword: Hazel Creek Place_Keyword: Sly Park Creek Access_Constraints: No access constraints Use_Constraints: USGS-authored or produced data and information are in the public domain from the U.S. Government and are freely redistributable with proper metadata and source attribution. Please recognize and acknowledge the U.S. Geological Survey as the originator(s) of the dataset and in products derived from these data. This information is not intended for navigation purposes. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-427-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: https://www.sciencebase.gov/catalog/file/get/667c598cd34e828a20a696d8?name=JenkinsonLake_2021-11-04_orthomosaic_browse.jpg&allowOpen=True Browse_Graphic_File_Description: Orthomosaic image from 2021-11-04 UAS survey. Browse_Graphic_File_Type: JPEG Native_Data_Set_Environment: Microsoft Windows 10, Agisoft Metashape 1.6.x through 2.0.x, Exiftool, QGIS 3.30, and GDAL 3.7.0 Cross_Reference: Citation_Information: Originator: Logan, J.B. Originator: Wernette, P.A. Originator: Ritchie, A.C. Publication_Date: 2022 Title: Agisoft Metashape/Photoscan Automated Image Alignment and Error Reduction version 2.0 Other_Citation_Details: Logan, J.B., Wernette, P.A. and Ritchie, A.C., 2022, Agisoft Metashape/Photoscan Automated Image Alignment and Error Reduction version 2.0: U.S. Geological Survey code repository, U.S. Geological Survey software release, python package, Reston, Va., (https://doi.org/10.5066/P9DGS5B9). Online_Linkage: https://doi.org/10.5066/P9DGS5B9 Cross_Reference: Citation_Information: Originator: Federal Geographic Data Committee Publication_Date: 1998 Title: Geospatial Positioning Accuracy Standards Part 3: National Standard for Spatial Data Accuracy Other_Citation_Details: FGDC-STD-007.3-1998 Online_Linkage: https://www.fgdc.gov/standards/projects/FGDC-standards-projects/accuracy/part3/chapter3 Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: No formal attribute accuracy tests were conducted. Logical_Consistency_Report: No formal logical accuracy tests were conducted. Completeness_Report: Dataset is considered complete for the information presented, as described in the abstract. Users are advised to read the rest of the metadata record carefully for additional details. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Horizontal precision was estimated by comparing ground control point (GCP) positions measured with survey-grade GNSS to their SfM-estimated positions. Due to the time-intensive process of placing GCPs in the field, all available GCPs were used for registration and camera optimization in the SfM processing workflow. To evaluate the horizontal precision of the final SfM alignments, a subset of GCPs for each survey date was disabled one at a time using a python script to create a 'temporary check point'. With the single GCP temporarily disabled, camera optimization was performed with all lens parameters fixed, and all other GCPs enabled. The residual errors of the check point relative to its GNSS-measured position were tabulated. After all temporary check point iterations were complete, the root-mean-square error (RMSE) was calculated. Following the Federal Geographic Data Committee (FGDC) National Standard for Spatial Data Accuracy guidelines, we use the RMSE to calculate the positional horizontal accuracy at the 95 percent confidence level. These values represent the relative precision of the SfM image alignment with respect to the GNSS-measured positions of the GCP locations. To derive an estimate of horizontal accuracy, we account for additional uncertainty in the GNSS-measured positions of the GCPs by including the following error estimates through summation in quadrature: 0.020 meters of horizontal uncertainty in the NGS OPUS-derived position of the GNSS base station operating on temporary benchmark “HZ01”; 0.010 meters of estimated horizontal uncertainty in the position of the GNSS rover. Additional sources of error in the GNSS rover measurements resulting from survey rod errors, antenna height measurement errors, and errors resulting from the settling of the survey rod in soft sediment are unknown. The horizontal precision of the orthomosaic shows a spatially variable pattern, based on visual review of stable objects on the ground in the orthomosaic from each survey date. The orthomosaics show good horizontal precision in the open region of the main delta on the Hazel Creek inlet as well as below the confluence of Hazel and Sly Park creeks. In contrast, the region of the narrow Sly Park Creek inlet, east of longitude -120.533935 shows larger than expected variability in the horizontal positions of fixed objects between survey dates. We attribute these apparent horizontal displacements to the abundance of tree canopy along the creek leading to poor SfM image alignment (from fewer high quality image tie points) as well as poor performance of GNSS in this environment. Thus, we provide two estimates of horizontal accuracy for the orthomosaics, one for the main delta region and one for the Sly Park Creek inlet region: - Main delta region, west of longitude -120.53394: Horizontal precision, based on one-at-a-time GCP check points, at the 95 percent confidence level (m): 0.049 meters Estimated accuracy of the GNSS-measured positions of GCPs (m): 0.022 meters Total horizontal accuracy estimate at the 95 percent confidence level, including GNSS uncertainty (m): 0.054 meters - Sly Park Creek inlet region, east of longitude -120.53394: Horizontal precision, based on one-at-a-time GCP check points, at the 95 percent confidence level (m): 0.380 meters Estimated accuracy of the GNSS-measured positions of GCPs (m): 0.022 meters Total horizontal accuracy estimate at the 95 percent confidence level, including GNSS uncertainty (m): 0.381 meters It should be noted that this error estimate is for areas of bare ground where GCPs were placed. Additional sources of error such as poor image-to-image point matching due to vegetation, shallow water, or uniform substrate texture (such as sand with uniform coloration) resulting in poor surface reconstruction may cause localized errors in some portions of the orthomosaics to exceed this estimate. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: Vertical positional accuracy was not evaluated for this data product. Lineage: Process_Step: Process_Description: Aerial imagery was collected using a Department of Interior-owned quadcopters fitted with Ricoh GR II digital cameras featuring global shutters. The cameras were mounted using fixed mount on the bottom of the UAS and oriented in an approximately nadir orientation. During acquisition the UAS was flown on pre-programmed autonomous flight lines at an approximate altitude of 100 meters above ground level (AGL), resulting in a nominal ground-sample-distance (GSD) of 2.6 centimeters per pixel. The flight lines were spaced to provide approximately 70-80 percent overlap between images from adjacent lines. The camera was triggered at 1 Hz using either a built-in or external intervalometer. Before each flight, the camera’s digital ISO, aperture and shutter speed were manually set to adjust for ambient light conditions. Although these settings were changed between flights, they were not permitted to change during a flight; thus, the images from each flight were acquired with consistent camera settings. The images were recorded in raw Adobe DNG format. The flights were conducted on 2021-10-13, 2021-11-04, 2022-10-25, and 2023-11-13. Process_Date: 20231113 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Joshua Logan Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Position: Physical Scientist Contact_Address: Address_Type: mailing address Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Country: US Contact_Voice_Telephone: 831-460-7519 Contact_Facsimile_Telephone: 831-427-4748 Contact_Electronic_Mail_Address: jlogan@usgs.gov Process_Step: Process_Description: Ground control was established using ground control points (GCPs) consisting of a combination of small square tarps with black-and-white cross patterns and temporary "X" marks placed with chalk on the ground surface throughout the survey area before each flight. The GCP positions were measured using post-processed kinematic (PPK) GPS, using corrections from a GPS base station located on a temporary benchmark ("HZ01") established near the El Dorado Irrigation District Hazel Creek Day Use Area. The coordinates for HZ01 were derived using the average of three National Geodetic Survey OPUS-S solutions from the static GNSS observations collected during the 2021 surveys. For each GCP measurement the GPS receiver was placed on a fixed-height tripod and set to occupy the GCP for a minimum occupation time of one minute. Post-processing was conducted using the Trimble Business Center software package. Process_Date: 20231113 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Joshua Logan Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-7519 Contact_Electronic_Mail_Address: jlogan@usgs.gov Process_Step: Process_Description: The image files were renamed using a custom python script. The file names were formed using the following pattern Fx-YYYYMMDDThhmmssZ_Ryz.*, where: - Fx = Flight number - YYYYMMDDThhmmssZ = date and time in the ISO 8601 standard, where 'T' separates the date from the time, and 'Z' denotes UTC ('Zulu') time. - Ry = RA or RB to distinguish camera 'RicohA' from 'RicohB' - z = original image name assigned by camera during acquisition - * = file extension (JPG or DNG) The approximate image acquisition coordinates were added to the image metadata (EXIF) ('geotagged') using the image timestamp and the telemetry logs from the UAS onboard single-frequency 1-Hz autonomous GPS. The geotagging process was done using either a custom python script which calls the exiftool utility, or by using the exiftool utility via the command line. To improve timestamp accuracy, the image acquisition times were adjusted to true ('corrected') UTC time as necessary by comparing the image timestamps with several images taken on the day of the flights of a smartphone app ('Emerald Time') showing accurate time from Network Time Protocol (NTP) servers. The positions stored in the EXIF are in geographic coordinates referenced to the WGS84(G1150) coordinate reference system (EPSG:4979), with elevation in meters relative to the WGS84 ellipsoid. Additional pertinent metadata were added to the EXIF headers using the command-line 'exiftool' software. Process_Date: 2023 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Joshua Logan Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-7519 Contact_Electronic_Mail_Address: jlogan@usgs.gov Process_Step: Process_Description: Structure-from-motion (SfM) processing techniques were used to create point clouds, DSMs, and orthomosaic images in the Agisoft Photoscan/Metashape software package using the following workflow: 1. Initial image alignment was performed in "4D" whereby the images from all survey dates were aligned together to improve survey-to-survey precision. The following parameters were used: Accuracy: 'high' Pair selection: 'reference', 'generic' Key point limit: 40,000 Tie point limit: 4,000 2. Ground control point (GCP) positions were imported, and markers were manually identified and placed in the images. 3. Sparse point cloud error reduction was performed using an automated python script (Logan and others, 2022), to sequentially apply the Reconstruction Uncertainty and Projection Accuracy gradual selection filters to remove 50 percent of the sparse points, followed by camera optimization. This resulted in the following final gradual selection filter values: Final Reconstruction Uncertainty: 20.0 Final Projection Accuracy: 4.0 Lens calibration parameters for optimization: f, cx, cy, k1, k2, k3, p1, and p2 4. Additional sparse point cloud error reduction was performed using the automated python script to iteratively apply the Reprojection Error gradual selection filter and camera optimization such that no more than 10 percent of the remaining sparse points are deleted at a time. Between each iteration of the filter, camera optimization was performed with the following lens calibration parameters: f, cx, cy, k1, k2, k3, p1, and p2. Once Reprojection Error was reduced below 1 pixel, additional lens calibration parameters (k4, b1, b2, p3, and p4) were included during optimization. This process was repeated until the following final Reprojection Error filter levels were achieved: Final Reprojection Error: 0.5 Lens calibration parameters for optimization: f, b1, b2, cx, cy, k1, k2, k3, k4, p1, p2, p3 and p4 Additional remaining sparse points obviously above or below the true surface were manually deleted after the last error reduction iteration, and a final optimization was performed. 5. After final error reduction, images from each survey date were separated into individual chunks for each date. 6. Dense point clouds were created for each survey-date chunk using the 'high' accuracy setting, with 'aggressive' depth filtering. 7. Digital Surface Models (DSM) for each survey date were created using the dense point clouds and exported to GeoTIFF files with 10-centimeter pixel resolutions and LZW compression. 8. RGB orthomosaics were created using the preliminary DSM as the orthorectification surface and exported to tiled GeoTIFF files with 2.5-centimeter pixel resolutions with LZW compression. 9. The GDAL software package "gdal_translate" utility was used to combine the tiled GeoTIFF files into one GeoTIFF with internal JPG compression with a quality of 90. 10. Exterior and interior clipping boundaries polygons were manually digitized in shapefiles using QGIS to exclude areas outside of the areas of interest, as well as to exclude areas of water in the reservoir. 11. The GDAL "gdalwarp" utility was used to clip the orthomosaic GeoTIFF files using the shapefile polygons and produce GeoTIFFs in cloud-optimized GeoTIFF (COG) format. The "target aligned pixels (-tap)" parameter was used to ensure cell alignment between the orthomosaics from each survey date. Process_Date: 2023 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Joshua Logan Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Position: Physical Scientist Contact_Address: Address_Type: mailing address Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Country: US Contact_Voice_Telephone: 831-460-7519 Contact_Facsimile_Telephone: 831-427-4748 Contact_Electronic_Mail_Address: jlogan@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Raster Raster_Object_Information: Raster_Object_Type: Grid Cell Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 10 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.9996 Longitude_of_Central_Meridian: -123.0 Latitude_of_Projection_Origin: 0.0 False_Easting: 500000.0 False_Northing: 0.0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: row and column Coordinate_Representation: Abscissa_Resolution: 0.025 Ordinate_Resolution: 0.025 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: NAD83 (National Spatial Reference System 2011) (EPSG:1116) Ellipsoid_Name: GRS 1980 (EPSG:7019) Semi-major_Axis: 6378137.0 Denominator_of_Flattening_Ratio: 298.257222101 Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: GeoTIFF Entity_Type_Definition: GeoTIFF containing RGB color bands. Entity_Type_Definition_Source: Producer defined Attribute: Attribute_Label: Band_1 Attribute_Definition: Red band Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 255 Attribute: Attribute_Label: Band_2 Attribute_Definition: Green band Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 255 Attribute: Attribute_Label: Band_3 Attribute_Definition: Blue band Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 255 Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey - ScienceBase Contact_Address: Address_Type: mailing address Address: Denver Federal Center, Building 810, Mail Stop 302 City: Denver State_or_Province: CO Postal_Code: 80225 Country: United States Contact_Voice_Telephone: 1-888-275-8747 Contact_Electronic_Mail_Address: sciencebase@usgs.gov Resource_Description: The orthomosaic images are available as Cloud Optimized GeoTIFF files. Distribution_Liability: Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: GeoTIFF Format_Version_Number: GDAL 3.7.0 Format_Information_Content: Cloud Optimized GeoTIFF contains a three-band RGB orthomosaic with 8-bit unsigned integer values stored with high quality JPEG compression File_Decompression_Technique: none Transfer_Size: 687.1 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/667c598cd34e828a20a696d8?name=JenkinsonLake_2021-10-13_orthomosaic_25mm.tif Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/667c598cd34e828a20a696d8?name=JenkinsonLake_2021-11-04_orthomosaic_25mm.tif Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/667c598cd34e828a20a696d8?name=JenkinsonLake_2022-10-25_orthomosaic_25mm.tif Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/667c598cd34e828a20a696d8?name=JenkinsonLake_2023-11-13_orthomosaic_25mm.tif Network_Resource_Name: https://prod-is-usgs-sb-prod-publish.s3.amazonaws.com/667c598cd34e828a20a696d8/JenkinsonLake_2021-10-13_orthomosaic_25mm.tif Network_Resource_Name: https://prod-is-usgs-sb-prod-publish.s3.amazonaws.com/667c598cd34e828a20a696d8/JenkinsonLake_2021-11-04_orthomosaic_25mm.tif Network_Resource_Name: https://prod-is-usgs-sb-prod-publish.s3.amazonaws.com/667c598cd34e828a20a696d8/JenkinsonLake_2022-10-25_orthomosaic_25mm.tif Network_Resource_Name: https://prod-is-usgs-sb-prod-publish.s3.amazonaws.com/667c598cd34e828a20a696d8/JenkinsonLake_2023-11-13_orthomosaic_25mm.tif Network_Resource_Name: https://www.sciencebase.gov/catalog/item/667c598cd34e828a20a696d8 Network_Resource_Name: https://doi.org/10.5066/P14QWDYN Access_Instructions: Data can be downloaded using the Network_Resource_Name links. The first four links are direct links to download the 25mm resolution orthomosaic images. The following four links are for accessing the orthomosaic images on cloud-based storage and can be used for cloud-based queries or viewing. The ninth link points to a landing page with the orthomosaic image, metadata, and a browse image. The tenth link points to the landing page for the entire data release, including links to pages of the various data files. Fees: None. Technical_Prerequisites: These data can be viewed with GIS software or other software capable of displaying geospatial raster data. Metadata_Reference_Information: Metadata_Date: 20240807 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-427-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998