Metadata: Identification_Information: Citation: Citation_Information: Originator: Joshua B. Logan Originator: Eric E. Grossman Originator: Nathan R. VanArendonk Originator: Avery F.G. Maverick Publication_Date: 20210222 Title: Digital surface models (DSMs) for the intertidal zone at Post Point, Bellingham Bay, WA, 2019-06-06 Geospatial_Data_Presentation_Form: GeoTIFF Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P94LH20J Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, California Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/P94LH20J Online_Linkage: https://www.sciencebase.gov/catalog/item/5ef53d9182ced62aaae6a0aa Larger_Work_Citation: Citation_Information: Originator: Joshua B. Logan Originator: Eric E. Grossman Originator: Nathan R. VanArendonk Originator: Avery F.G. Maverick Publication_Date: 2021 Title: Aerial imagery and structure-from-motion data products from UAS survey of the intertidal zone at Post Point, Bellingham Bay, WA, June 2019 Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P94LH20J Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, CA Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/P94LH20J Online_Linkage: https://www.sciencebase.gov/catalog/item/5f2c568b82ceae4cb3c2cffc Description: Abstract: This portion of the data release presents digital surface models (DSMs) and hillshade images of the intertidal zone at Post Point, Bellingham Bay, WA. The DSMs were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-06. Unlike a digital elevation model (DEM), the DSMs represent the elevation of the highest object within the bounds of a cell. Vegetation, buildings and other objects have not been removed from the data. In addition, data artifacts resulting from noise in the original imagery have not been removed. The DSMs are presented with two resolutions: one DSM, covering the entire survey area, has a resolution of 4 centimeters per pixel; the other DSM which was derived from a lower-altitude flight, covers an inset area within the main survey area and has a resolution of 2 centimeters per-pixel. The raw imagery used to create these DSMs was acquired using a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines. The camera was triggered at 1 Hz using a built-in intervalometer. For the main DSM, the UAS was flown at an approximate altitude of 70 meters above ground level (AGL), resulting in a nominal ground-sample-distance (GSD) of 1.8 centimeters per pixel. For the higher-resolution DSM, the UAS was flown at an approximate altitude of 35 meters (AGL), resulting in a nominal ground-sample-distance (GSD) of 0.9 centimeters per pixel. The raw imagery was geotagged using positions from the UAS onboard single-frequency autonomous GPS. Nineteen temporary ground control points (GCPs) were distributed throughout each survey area to establish survey control. The GCPs consisted of a combination of small square tarps with black-and-white cross patterns and "X" marks placed on the ground using temporary chalk. The GCP positions were measured using post-processed kinematic (PPK) GPS, using corrections from a GPS base station located approximately 5 kilometers from the study area. The DSMs and hillshade images have been formatted as cloud optimized GeoTIFFs with internal overviews and masks to facilitate cloud-based queries and display. Purpose: These data were collected to characterize the morphology, substrate composition and roughness of intertidal areas to support modeling of coastal storm and wave impacts with sea-level rise as part of the USGS Puget Sound Coastal Storm Modeling System (PS-CoSMoS). The data are also intended to be used to model and evaluate sediment transport and its effects on coastal habitats, a focus of the USGS Coastal Habitats in Puget Sound Project (CHIPS) and its partners to inform resource management and adaptive planning for our Nation's coasts. The DSM can be used with geographic information systems (GIS) software for research purposes. Supplemental_Information: Additional information about the field activity from which these data were derived is available online at: http://cmgds.marine.usgs.gov/fan_info.php?fan=2019-623-FA Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20190606 Currentness_Reference: ground condition at time data were collected Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -122.5201 East_Bounding_Coordinate: -122.5156 North_Bounding_Coordinate: 48.7204 South_Bounding_Coordinate: 48.7113 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: elevation Theme_Keyword: geoscientificInformation Theme: Theme_Keyword_Thesaurus: Data Categories for Marine Planning Theme_Keyword: Bathymetry and Elevation Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: topography Theme_Keyword: topographic maps Theme_Keyword: remote sensing Theme_Keyword: geomorphology Theme_Keyword: aerial photography Theme_Keyword: image mosaics Theme_Keyword: geospatial datasets Theme: Theme_Keyword_Thesaurus: Marine Realms Information Bank (MRIB) keywords Theme_Keyword: photography Theme_Keyword: remote sensing Theme_Keyword: aerial and satellite photography Theme_Keyword: altimetry Theme_Keyword: orthophotography Theme_Keyword: coastal processes Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: U.S. Geological Survey Theme_Keyword: USGS Theme_Keyword: Coastal and Marine Hazards and Resources Program Theme_Keyword: CHMRP Theme_Keyword: Pacific Coastal and Marine Science Center Theme_Keyword: PCMSC Theme_Keyword: Unmanned aerial system Theme_Keyword: UAS Theme_Keyword: Structure-from-motion Theme_Keyword: SfM Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:5ef53d9182ced62aaae6a0aa Place: Place_Keyword_Thesaurus: Geographic Names Information System (GNIS) Place_Keyword: State of Washington Place_Keyword: Whatcom County Place_Keyword: Bellingham Place_Keyword: South Bellingham Place_Keyword: Fairhaven Place_Keyword: Puget Sound Place_Keyword: Salish Sea Place_Keyword: Bellingham Bay Place_Keyword: Post Point Access_Constraints: None Use_Constraints: USGS-authored or produced data and information are in the public domain from the U.S. Government and are freely redistributable with proper metadata and source attribution. Please recognize and acknowledge the U.S. Geological Survey as the originator(s) of the dataset and in products derived from these data. This information is not intended for navigation purposes. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-427-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: https://www.sciencebase.gov/catalog/file/get/5ef53d9182ced62aaae6a0aa?name=PostPoint_2019-06-06_DSM_browse.jpg Browse_Graphic_File_Description: Color-shaded relief DSM for Post Point, Bellingham Bay, WA Browse_Graphic_File_Type: JPEG Native_Data_Set_Environment: Microsoft Windows 10, Agisoft PhotoScan version 1.4.4 through Agisoft Metashape 1.5.3, ESRI ArcGIS 10.6 through 10.7, Exiftool, QGIS 3.04 through 3.12, and GDAL 3.1.0. Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: No formal attribute accuracy tests were conducted. Logical_Consistency_Report: No formal logical accuracy tests were conducted. Completeness_Report: Dataset is considered complete for the information presented, as described in the abstract. Users are advised to read the rest of the metadata record carefully for additional details. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Horizontal accuracy was estimated by comparing SfM-derived ground control point (GCP) positions to PPK GPS measurements. Due to the time-intensive process of placing GCPs in the field, all available GCPs were used for registration and camera optimization in the SfM processing workflow during the creation of the final DSM. To evaluate the horizontal positional accuracy of the DSM after processing was completed, a subset of GCPs was disabled one-at-a-time using a python script to create 'temporary check points'. With a single GCP temporarily disabled, camera optimization was performed with all lens parameters fixed, and all other GCPs enabled. The residual errors of the check point relative to its GPS-measured position were recorded. After all temporary check point iterations were complete, the root-mean-square error (RMSE) and mean-absolute error (MAE) were calculated. For the Post Point 4-centimeter resolution DSM (PostPoint_2019-06-06_DSM_4cm.tif), the resulting horizontal RMSE was 0.018 meters (MAE 0.015 meters), and for the Post Point 2-centimeter resolution DSM (PostPoint_2019-06-06_DSM_2cm.tif), the resulting horizontal RMSE was 0.030 meters (MAE 0.027 meters). The addition of the estimated horizontal GPS uncertainty (0.020 meters) in quadrature results in a total accuracy estimate of 0.027 meters for the 4-centimeter resolution DSM, and 0.036 meters for the 2-centimeter resolution DSM. It should be noted that this error estimate is for areas of bare ground or low vegetation where GCPs were placed. Additional sources of error such as poor image-to-image point matching due to vegetation or uniform substrate texture (such as sand) resulting in poor surface reconstruction may cause localized errors in some portions of the DSM to exceed this estimate. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: Vertical accuracy was estimated using two methods to compare the DSM vertical elevations to concurrently collected post-processed kinematic (PPK) GPS measurements. The first method used a comparison of SfM-derived ground control point (GCP) positions to PPK GPS measurements at those points. Due to the time-intensive process of placing GCPs in the field, all available GCPs were used for registration and camera optimization in the SfM processing workflow during the creation of the final DSM. To evaluate the vertical positional accuracy of the DSM after processing was completed, a subset of GCPs was disabled one-at-a-time using a python script to create 'temporary check points'. With a single GCP temporarily disabled, camera optimization was performed with all lens parameters fixed, and all other GCPs enabled. The residual errors of the check point relative to its GPS-measured position were recorded. After all temporary check point iterations were complete, the root-mean-square error (RMSE) and mean-absolute error (MAE) were calculated. For the Post Point 4-centimeter resolution DSM (PostPoint_2019-06-06_DSM_4cm.tif), the vertical RMSE was 0.040 meters (MAE 0.030 meters), and for the Post Point 2-centimeter resolution DSM (PostPoint_2019-06-06_DSM_2cm.tif), the vertical RMSE was 0.042 meters (MAE 0.034 meters) relative to the GPS measurements. The addition of the estimated vertical GPS uncertainty (0.030 meters) in quadrature results in a total vertical accuracy estimate of 0.050 meters for the 4-centimeter resolution DSM and 0.052 meters for the 2-centimeter resolution DSM. It should be noted that this estimate is for areas of bare ground or low vegetation where GCPs were placed. Additional sources of error such as poor image-to-image point matching due to vegetation or uniform substrate texture (such as sand) resulting in poor surface reconstruction may cause localized errors in some portions of the DSM to exceed this estimate. A second method was used to attempt to quantify the vertical errors in areas away from the GCPs. During field data collection, topographic measurements on unvegetated areas were collected with backpack-mounted PPK GPS. These measurements were compared to the DSM elevations using bilinear interpolation at each GPS point to derive additional accuracy estimates for the DSM. For the Post Point 4-centimeter resolution DSM (PostPoint_2019-06-06_DSM_4cm.tif) the vertical RMSE of 7,465 backpack-mounted PPK GPS measurements compared to the DSM elevations was 0.061 meters (MAE 0.043 meters). The mean-error (vertical bias) of the GPS measurements relative to DSM elevations was -0.020 meters, meaning the 4-centimeter resolution DSM was, on average, higher than the GPS measurements. For the Post Point 2-centimeter resolution DSM (PostPoint_2019-06-06_DSM_2cm.tif) the vertical RMSE of 3,589 backpack-mounted PPK GPS measurements compared to the DSM elevations was 0.065 meters (MAE 0.048 meters). The mean-error (vertical bias) of the GPS measurements relative to DSM elevations was -0.016 meters, meaning the 2-centimeter resolution DSM was, on average, higher than the GPS measurements. The addition of the estimated vertical uncertainty of the backpack-mounted GPS (0.035 meters) in quadrature results in a total vertical accuracy estimate of 0.070 meters for the 4-centimeter resolution DSM and 0.074 meters for the 2-centimeter resolution DSM using this method. These slightly higher errors are due in part to the less precise nature of the backpack-mounted GPS measurements. However, these backpack-mounted GPS comparisons do provide a more conservative, and more spatially distributed estimate of the true accuracy of the DSM than the GCP check point method. We present both estimates here to provide the end-user with a more complete understanding of the accuracy of the final data product. Lineage: Process_Step: Process_Description: Aerial imagery was collected using a Department of Interior-owned 3DR Solo quadcopter fitted with a Ricoh GR II digital camera featuring a global shutter. The camera was mounted using a fixed mount on the bottom of the UAS and oriented in an approximately nadir orientation. The UAS was flown on pre-programmed autonomous flight lines. Flights F01, F02, and F03 were flown at an approximate altitude of 70 meters above ground level (AGL); flights F04 and F05 were flown at an approximate altitude of 35 meters AGL. The flight lines were oriented roughly shore-parallel and were spaced to provide approximately 70 percent overlap between images from adjacent lines. After the flight lines were completed some additional imagery was collected in manual flight mode to fill in additional areas and to collect redundant imagery with the camera sensor at different orientations to improve lens-model reconstruction. The camera was triggered at 1 Hz using a built-in intervalometer and was programmed to simultaneously acquire imagery in both JPG and camera raw (Adobe DNG) formats. Before each flight, the camera's digital ISO, aperture and shutter speed were manually set to adjust for ambient light conditions. Although these settings were changed between flights, they were not permitted to change during a flight; thus, the images from each flight were acquired with consistent camera settings. Process_Date: 20190606 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Joshua Logan Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Position: Physical Scientist Contact_Address: Address_Type: mailing address Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Country: US Contact_Voice_Telephone: 831-460-7519 Contact_Facsimile_Telephone: 831-427-4748 Contact_Electronic_Mail_Address: jlogan@usgs.gov Process_Step: Process_Description: Ground control was established using ground control points (GCPs) consisting of small square tarps with black-and-white cross patterns and temporary chalk 'X' marks placed on the ground surface throughout the survey area. The GCP positions were measured using survey-grade GPS receivers operating in post-processed-kinematic (PPK) mode. The GPS receivers were placed on short fixed-height tripods and set to occupy each GCP for a minimum occupation time of one minute. The PPK corrections were referenced to a Continuously Operating Reference (CORS) GPS base station ('BELI') located approximately 5 kilometers from the study area operated by the Washington State Reference Network (WSRN). Process_Date: 20190606 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Joshua Logan Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-7519 Contact_Electronic_Mail_Address: jlogan@usgs.gov Process_Step: Process_Description: The image files were renamed using a custom python script. The file names were formed using the following pattern Fx-YYYYMMDDThhmmssZ_Ryz.*, where: - Fx = Flight number - YYYYMMDDThhmmssZ = date and time in the ISO 8601 standard, where 'T' separates the date from the time, and 'Z' denotes UTC ('Zulu') time. - Ry = RA or RB to distinguish camera 'RicohA' from 'RicohB' - z = original image name assigned by camera during acquisition - * = file extension (JPG or DNG) The approximate image acquisition coordinates were added to the image metadata (EXIF) ('geotagged') using the image timestamp and the telemetry logs from the UAS onboard single-frequency 1-Hz autonomous GPS. The geotagging process was done using a custom Python script which processes the GPS data from the UAS telemetry log and calls the command-line 'exiftool' software. To improve timestamp accuracy, the image acquisition times were adjusted to true ('corrected') UTC time by comparing the image timestamps with several images taken of a smartphone app ('Emerald Time') showing accurate time from Network Time Protocol (NTP) servers. For this survey, +00:00:02 (2 seconds) were added to the image timestamp to synchronize with corrected UTC time. The positions stored in the EXIF are in geographic coordinates referenced to the WGS84(G1150) coordinate reference system (EPSG:7660), with elevation in meters relative to the WGS84 ellipsoid. Additional information was added to the EXIF using the command-line 'exiftool' software with the following command: exiftool ^ -P ^ -Copyright="Public Domain. Please credit U.S. Geological Survey." ^ -CopyrightNotice="Public Domain. Please credit U.S. Geological Survey." ^ -ImageDescription="Low-altitude aerial image of the intertidal zone at Post Point, Bellingham Bay, Bellingham, Washington, USA, from USGS survey 2019-623-FA." ^ -Caption-Abstract="Intertidal zone at Post Point, Bellingham Bay, Bellingham, Washington, USA, from USGS survey 2019-623-FA." ^ -Caption="Aerial image of the intertidal zone at Post Point, Bellingham Bay, Bellingham, Washington, USA, from USGS survey 2019-623-FA." ^ -sep ", " ^ -keywords="Marine Nearshore Intertidal, Post Point, Bellingham Bay, Bellingham, Washington, 2019-623-FA, Unmanned Aircraft System, UAS, drone, aerial imagery, U.S. Geological Survey, USGS, Pacific Coastal and Marine Science Center" ^ -comment="Low-altitude aerial image from USGS Unmanned Aircraft System (UAS) survey 2019-623-FA." ^ -Credit="U.S. Geological Survey" ^ -Contact="pcmsc_data@usgs.gov" ^ -Artist="U.S. Geological Survey, Pacific Coastal and Marine Science Center" Process_Date: 2019 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Joshua Logan Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-7519 Contact_Electronic_Mail_Address: jlogan@usgs.gov Process_Step: Process_Description: Structure-from-motion (SfM) processing techniques were used to create the Digital Surface Models (DSMs) in the Agisoft Photoscan/Metashape software package using the following workflow: 1. Initial image alignment was performed with the following parameters - Accuracy: 'high'; Pair selection: 'reference', 'generic'; Key point limit: 0 (unlimited); Tie point limit: 0 (unlimited). 2. Sparse point cloud error reduction was performed using an iterative gradual selection and camera optimization process with the following parameters: Reconstruction Uncertainty: 10; Projection Accuracy: 3. Lens calibration parameters f, cx, cy, k1, k2, k3, p1, and p2 were included in the optimization. Additional sparse points obviously above or below the true surface were manually deleted after the last error reduction iteration. 3. Ground control points (GCPs) were automatically detected using the 'Cross (non-coded)' option. False matches were manually removed, and all markers were visually checked and manually placed or adjusted if needed. Markers were manually placed for GCPs that consisted of chalk 'X' marks. 4. Additional sparse point cloud error reduction was performed using an iterative gradual selection and camera optimization process with the following parameters: Reconstruction Error: 0.3. Lens calibration parameters f, cx, cy, k1, k2, k3, p1, and p2 were initially included in the optimization, but additional parameters k4, b1, b2, p3, and p4 were included once Reconstruction Error was reduced below 1 pixel. Additional sparse points obviously above or below the true surface were manually deleted after the last error reduction iteration, and a final optimization was performed. 5. A dense point cloud was created using the 'high' accuracy setting, with 'aggressive' depth filtering. 6. A Digital Surface Model (DSM) with a native resolution of 3.57 centimeters per pixel was created using all points in the dense point cloud for the main DSM. For the high-resolution data a DSM with a native resolution of 1.78 centimeters per-pixel was created using all points in the high-resolution dense point cloud. 7. An RGB orthomosaic with a native resolution of 1.84 centimeters per pixel was created using the main DSM as the orthorectification surface. For the high-resolution data an RGB orthomosaic with a native resolution of 0.92 centimeters per pixel was created using the high-resolution DSM as the orthorectification surface. 8. An exterior boundary was digitized using the orthomosaics as a reference and used as a clipping mask to exclude areas of water, obvious edge artifacts, and large areas of interpolation. 9. The main DSM was exported to a GeoTIFF format with a 4-centimeter pixel resolution. The high-resolution DSM was exported to a GeoTIFF format with a 2-centimeter pixel resolution. 10. The DSMs were converted to cloud optimized GeoTIFF format for compatibility with cloud storage services using the GDAL software package. The DSMs were compressed using the lossless LZW compression method, and 'NoData' value set to -32767. Hillshades of the DSMs were created in cloud optimized GeoTIFF format using GDAL. Process_Date: 2019 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Joshua Logan Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Position: Physical Scientist Contact_Address: Address_Type: mailing address Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Country: US Contact_Voice_Telephone: 831-460-7519 Contact_Facsimile_Telephone: 831-427-4748 Contact_Electronic_Mail_Address: jlogan@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Raster Raster_Object_Information: Raster_Object_Type: Grid Cell Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 10 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.9996 Longitude_of_Central_Meridian: -123.0 Latitude_of_Projection_Origin: 0.0 False_Easting: 500000.0 False_Northing: 0.0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: row and column Coordinate_Representation: Abscissa_Resolution: 0.040 Ordinate_Resolution: 0.040 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: NAD83 (National Spatial Reference System 2011) (EPSG:1116) Ellipsoid_Name: GRS 1980 (EPSG:7019) Semi-major_Axis: 6378137.0 Denominator_of_Flattening_Ratio: 298.257222101 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Datum_Name: North American Vertical Datum of 1988 (EPSG:5703), derived using GEOID12B Altitude_Resolution: 0.001 Altitude_Distance_Units: meters Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: GeoTIFF Entity_Type_Definition: GeoTIFF containing elevation values. Entity_Type_Definition_Source: Producer defined Attribute: Attribute_Label: N/A Attribute_Definition: Elevation relative to the North American vertical datum of 1988 (NAVD88), derived using GEOID12B Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.193 Range_Domain_Maximum: 38.617 Attribute_Units_of_Measure: meters Attribute_Measurement_Resolution: 0.001 Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey - ScienceBase Contact_Address: Address_Type: mailing address Address: Denver Federal Center, Building 810, Mail Stop 302 City: Denver State_or_Province: CO Postal_Code: 80225 Country: United States Contact_Voice_Telephone: 1-888-275-8747 Contact_Electronic_Mail_Address: sciencebase@usgs.gov Resource_Description: The Post Point DSMs and hillshades (PostPoint_2019-06-06_DSM_4cm.tif, PostPoint_2019-06-06_DSM_4cm_hll.tif, PostPoint_2019-06-06_DSM_2cm.tif, and PostPoint_2019-06-06_DSM_2cm_hll.tif) are available as Cloud Optimized GeoTIFF files. Distribution_Liability: Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: GeoTIFF Format_Version_Number: GDAL 3.1.0dev Format_Information_Content: Cloud Optimized GeoTIFF contains a Digital Surface Model (DSM) with single-precision floating-point values compressed using the LZW lossless compression method. No data value is -32767. File_Decompression_Technique: none Transfer_Size: 246 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/5ef53d9182ced62aaae6a0aa?name=PostPoint_2019-06-06_DSM_4cm.tif Network_Resource_Name: https://prod-is-usgs-sb-prod-publish.s3.amazonaws.com/5ef53d9182ced62aaae6a0aa/PostPoint_2019-06-06_DSM_4cm.tif Network_Resource_Name: https://www.sciencebase.gov/catalog/item/5ef53d9182ced62aaae6a0aa Network_Resource_Name: https://doi.org/10.5066/P94LH20J Access_Instructions: Data can be downloaded using the Network_Resource_Name links. The first link is a direct link to download the 4-centimeter DSM. The second link is for accessing the DSM on cloud-based storage and can be used for cloud-based queries or viewing. The third link points to a landing page with the DSM and a hillshade, metadata, and browse image. The fourth link points to the landing page for the entire data release, including links to pages of the various data files. Digital_Form: Digital_Transfer_Information: Format_Name: GeoTIFF Format_Version_Number: GDAL 3.1.0dev Format_Information_Content: Cloud Optimized GeoTIFF contains hillshade of Digital Surface Model (DSM) with 8-bit unsigned integer values compressed using the LZW lossless compression method. No data value is 0. File_Decompression_Technique: none Transfer_Size: 61 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/5ef53d9182ced62aaae6a0aa?name=PostPoint_2019-06-06_DSM_4cm_hll.tif Network_Resource_Name: https://prod-is-usgs-sb-prod-publish.s3.amazonaws.com/5ef53d9182ced62aaae6a0aa/PostPoint_2019-06-06_DSM_4cm_hll.tif Network_Resource_Name: https://www.sciencebase.gov/catalog/item/5ef53d9182ced62aaae6a0aa Network_Resource_Name: https://doi.org/10.5066/P94LH20J Access_Instructions: Data can be downloaded using the Network_Resource_Name links. The first link is a direct link to download the 4-centimeter hillshade. The second link is for accessing the hillshade on cloud-based storage and can be used for cloud-based queries or viewing. The third link points to a landing page with the DSM and a hillshade, metadata, and browse image. The fourth link points to the landing page for the entire data release, including links to pages of the various data files. Digital_Form: Digital_Transfer_Information: Format_Name: GeoTIFF Format_Version_Number: GDAL 3.1.0dev Format_Information_Content: Cloud Optimized GeoTIFF contains a Digital Surface Model (DSM) with single-precision floating-point values compressed using the LZW lossless compression method. No data value is -32767. File_Decompression_Technique: none Transfer_Size: 323 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/5ef53d9182ced62aaae6a0aa?name=PostPoint_2019-06-06_DSM_2cm.tif Network_Resource_Name: https://prod-is-usgs-sb-prod-publish.s3.amazonaws.com/5ef53d9182ced62aaae6a0aa/PostPoint_2019-06-06_DSM_2cm.tif Network_Resource_Name: https://www.sciencebase.gov/catalog/item/5ef53d9182ced62aaae6a0aa Network_Resource_Name: https://doi.org/10.5066/P94LH20J Access_Instructions: Data can be downloaded using the Network_Resource_Name links. The first link is a direct link to download the 2-centimeter DSM. The second link is for accessing the DSM on cloud-based storage and can be used for cloud-based queries or viewing. The third link points to a landing page with the DSM and a hillshade, metadata, and browse image. The fourth link points to the landing page for the entire data release, including links to pages of the various data files. Digital_Form: Digital_Transfer_Information: Format_Name: GeoTIFF Format_Version_Number: GDAL 3.1.0dev Format_Information_Content: Cloud Optimized GeoTIFF contains hillshade of Digital Surface Model (DSM) with 8-bit unsigned integer values compressed using the LZW lossless compression method. No data value is 0. File_Decompression_Technique: none Transfer_Size: 82 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/5ef53d9182ced62aaae6a0aa?name=PostPoint_2019-06-06_DSM_2cm_hll.tif Network_Resource_Name: https://prod-is-usgs-sb-prod-publish.s3.amazonaws.com/5ef53d9182ced62aaae6a0aa/PostPoint_2019-06-06_DSM_2cm_hll.tif Network_Resource_Name: https://www.sciencebase.gov/catalog/item/5ef53d9182ced62aaae6a0aa Network_Resource_Name: https://doi.org/10.5066/P94LH20J Access_Instructions: Data can be downloaded using the Network_Resource_Name links. The first link is a direct link to download the 2-centimeter hillshade. The second link is for accessing the hillshade on cloud-based storage and can be used for cloud-based queries or viewing. The third link points to a landing page with the DSM and a hillshade, metadata, and browse image. The fourth link points to the landing page for the entire data release, including links to pages of the various data files. Fees: None. Technical_Prerequisites: These data can be viewed with GIS software or other software capable of displaying geospatial raster data. Metadata_Reference_Information: Metadata_Date: 20210222 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-427-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998