Metadata: Identification_Information: Citation: Citation_Information: Originator: Andrew W. Stevens Originator: Guy R. Gelfenbaum Originator: Jonathan A. Warrick Originator: Ian M. Miller Originator: Heather M. Weiner Publication_Date: 2024 Title: Surface-sediment grain-size distributions of the Elwha River delta, Washington, August 2019 Geospatial_Data_Presentation_Form: comma-delimited text Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P9CR1ABQ Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, California Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/P9CR1ABQ Online_Linkage: https://www.sciencebase.gov/catalog/item/6578f9ced34e952b22747abf Larger_Work_Citation: Citation_Information: Originator: Andrew W. Stevens Originator: Guy R. Gelfenbaum Originator: Jonathan A. Warrick Originator: Ian M. Miller Originator: Heather M. Weiner Publication_Date: 2024 Title: Bathymetry, topography, and sediment grain-size data from the Elwha River delta, Washington, August 2019 Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P9CR1ABQ Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, CA Publisher: U.S. Geological Survey Other_Citation_Details: Suggested Citation: Stevens, A.W., Gelfenbaum, G.R., Warrick, J.A., Miller, I.M., and Weiner, H.M., 2024, Bathymetry, topography, and sediment grain-size data from the Elwha River delta, Washington, August 2019: U.S. Geological Survey data release, https://doi.org/10.5066/P9CR1ABQ. Online_Linkage: https://doi.org/10.5066/P9CR1ABQ Description: Abstract: This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in August 2019 (USGS Field Activity 2019-633-FA). Surface sediment was collected from 77 locations using a small ponar, or 'grab', sampler from the R/V Frontier in water depths between about 1 and 17 m around the delta. An additional 30 samples were collected by hand at low tide. A hand-held global satellite navigation system (GNSS) receiver was used to determine the locations of sediment samples. The grain size distributions of suitable samples were determined using standard techniques developed by the USGS Pacific Coastal and Marine Science Center sediment lab. Grab samples that yielded less than 50 g of sediment were omitted from analysis. The grain-size data are provided in a comma-delimited spreadsheet (.csv). Purpose: Data were obtained to assess the coastal geomorphic response following the removal of two dams on the Elwha River. These data are intended for science researchers, students, policy makers, and the general public. Supplemental_Information: Additional information about the field activities from which these data were derived is available online at: https://cmgds.marine.usgs.gov/fan_info.php?fan=2019-633-FA Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20190826 Ending_Date: 20190829 Currentness_Reference: Ground condition at time data were collected Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -123.583657 East_Bounding_Coordinate: -123.419187 North_Bounding_Coordinate: 48.162311 South_Bounding_Coordinate: 48.132698 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: oceans Theme: Theme_Keyword_Thesaurus: Data Categories for Marine Planning Theme_Keyword: Substrate Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: ocean processes Theme_Keyword: sediment transport Theme_Keyword: grain-size analysis Theme: Theme_Keyword_Thesaurus: Marine Realms Information Bank (MRIB) keywords Theme_Keyword: sediment Theme_Keyword: Global Positioning System (GPS) observations Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: U.S. Geological Survey Theme_Keyword: USGS Theme_Keyword: Coastal and Marine Hazards and Resources Program Theme_Keyword: CMHRP Theme_Keyword: Pacific Coastal and Marine Science Center Theme_Keyword: PCMSC Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:6578f9ced34e952b22747abf Place: Place_Keyword_Thesaurus: Geographic Names Information System (GNIS) Place_Keyword: Clallam County Place_Keyword: Olympic Peninsula Place_Keyword: Strait of Juan de Fuca Place_Keyword: Elwha River Access_Constraints: No access constraints Use_Constraints: USGS-authored or produced data and information are in the public domain from the U.S. Government and are freely redistributable with proper metadata and source attribution. Please recognize and acknowledge the U.S. Geological Survey as the originator(s) of the dataset and in products derived from these data. This information is not intended for navigation purposes. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-427-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Native_Data_Set_Environment: MATLAB Version: 9.8.0.1396136 (R2020a) Cross_Reference: Citation_Information: Originator: Robert Louis Folk Originator: William C. Ward Publication_Date: 1957 Title: Brazos River bar; a study in the significance of grain size parameters Other_Citation_Details: Folk, R.L., and Ward, W.C., 1957, Brazos River bar; a study in the significance of grain size parameters: Journal of Sedimentary Research, v. 27, n. 1, p. 3-26. Online_Linkage: https://doi.org/10.1306/74D70646-2B21-11D7-8648000102C1865D Cross_Reference: Citation_Information: Originator: Douglas Lamar Inman Publication_Date: 1952 Title: Measures for describing the size distribution of sediments Other_Citation_Details: Inman, D.L., 1952, Measures for describing the size distribution of sediments: Journal of Sedimentary Research, v. 22, n. 3, p. 125-145. Online_Linkage: https://doi.org/10.1306/D42694DB-2B26-11D7-8648000102C1865D Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: No formal attribute accuracy tests were conducted. Logical_Consistency_Report: No formal logical accuracy tests were conducted. Completeness_Report: Dataset is considered complete for the information presented, as described in the abstract. Users are advised to read the rest of the metadata record carefully for additional details. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: The locations of samples were determined using a Garmin 78s handheld global satellite navigation systems (GNSS) receiver capable of receiving wide area augmentation system (WAAS) signals. The manufacturer reported accuracy for horizontal positions is 3-5 m while receiving WAAS signals. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: No formal positional accuracy tests were conducted Lineage: Process_Step: Process_Description: Surface sediment was collected on August 26, 2019 at a total of 77 locations using a small ponar, or 'grab', sampler from the R/V Frontier in water depths between about 1 and 17 m around the delta. An additional 30 samples were collected by hand at low tide between August 27 and August 29, 2019. A hand-held global satellite navigation system (GNSS) receiver was used to determine the locations of sediment samples. Grab samples that yielded less than 50 g of sediment were omitted from analysis. Process_Date: 20190829 Process_Step: Process_Description: The grain-size distributions of suitable samples were determined in the USGS Pacific Coastal and Marine Science Center sediment lab. Approximately 20 g of sediment was sub-sampled and 10 mL of 35 percent hydrogen peroxide was added to remove organic material in the sample. The sample was heated at 250 degrees C to remove any remaining hydrogen peroxide and was placed in an ultrasonic bath to liberate the fine fraction. Subsequently, the sample was centrifuged for 1.5 hours to remove soluble salts. Samples were funneled through 2 mm and 63 um sieves to separate the gravel (greater than 2 mm), sand (63 um to 2 mm), and mud (less than 63 um). The sand and gravel fractions were dried in an 80-degree C oven and weighed. Five mL of sodium hexametaphosphate was added to the mud fraction and a 20 mL aliquot was taken from a 1 L graduated cylinder to determine the weight of the mud. The particle-size distribution of the mud and sand fractions was analyzed separately using a Beckman Coulter LS 13 320, and the gravel, sand, and mud results were integrated into a single grain-size distribution for each sample. Process_Date: 20231006 Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Point Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point Point_and_Vector_Object_Count: 107 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 0.000001 Longitude_Resolution: 0.000001 Geographic_Coordinate_Units: Decimal degrees Geodetic_Model: Horizontal_Datum_Name: WGS1984 Ellipsoid_Name: WGS1984 Semi-major_Axis: 6378137.0 Denominator_of_Flattening_Ratio: 298.257223563 Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: Attribute Table Entity_Type_Definition: Table containing attribute information associated with the dataset Entity_Type_Definition_Source: Producer defined Attribute: Attribute_Label: FAN ID Attribute_Definition: Unique U.S. Geological Survey field activity identifier Attribute_Definition_Source: producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique identifier for the U.S. Geological Survey field activity Attribute: Attribute_Label: Sample ID Attribute_Definition: Name of sample Attribute_Definition_Source: producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique identifier for the sample used given in the field Attribute: Attribute_Label: Date Collected Attribute_Definition: Date of sample collection in yyyy-mm-dd format Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2019-08-26 Range_Domain_Maximum: 2019-08-29 Attribute_Units_of_Measure: Dates in yyyy-mm-dd format Attribute: Attribute_Label: Sample Recovered Attribute_Definition: Flag to indicate whether sample was recovered Attribute_Definition_Source: producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Yes Enumerated_Domain_Value_Definition: Sample collection successful at site, sample collected Enumerated_Domain_Value_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: No Enumerated_Domain_Value_Definition: Sample collection unsuccessful, no sample recovered Enumerated_Domain_Value_Definition_Source: Producer defined Attribute: Attribute_Label: Time Attribute_Definition: Time of sample collection in HH:MM:SS format relative to Greenwich Mean Time (GMT) Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 00:00:00 Range_Domain_Maximum: 23:59:59 Attribute_Units_of_Measure: Times in HH:MM:SS format Attribute: Attribute_Label: Latitude Attribute_Definition: Latitude of sample in decimal degrees, north Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 48.132698 Range_Domain_Maximum: 48.162311 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Longitude Attribute_Definition: Longitude of sample in decimal degrees, east Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -123.583657 Range_Domain_Maximum: -123.419187 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Sample Type Attribute_Definition: Type of sample collected Attribute_Definition_Source: Produce defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Surface Enumerated_Domain_Value_Definition: Sample collected on land by hand Enumerated_Domain_Value_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Grab Enumerated_Domain_Value_Definition: Sample collected with grab sampler from boat Enumerated_Domain_Value_Definition_Source: Producer defined Attribute: Attribute_Label: Wt. percent in -2.00 phi bin or 4 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -2.00 and -2.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -1.00 phi bin or 2 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -1.00 and -1.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -0.75 phi bin or 1.68 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -0.75 and -1.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -0.50 phi bin or 1.41 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -0.50 and -0.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -0.25 phi bin or 1.19 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -0.25 and -0.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.00 phi bin or 1 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.00 and -0.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.25 phi bin or 0.8409 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.25 and 0.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.50 phi bin or 0.7071 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.50 and 0.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.75 phi bin or 0.5946 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.75 and 0.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.00 phi bin or 0.5 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.00 and 0.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.25 phi bin or 0.4204 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.25 and 1.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.50 phi bin or 0.3536 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.50 and 1.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.75 phi bin or 0.2973 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.75 and 1.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.00 phi bin or 0.25 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.00 and 1.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.25 phi bin or 0.2102 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.25 and 2.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.50 phi bin or 0.1768 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.50 and 2.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.75 phi bin or 0.1487 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.75 and 2.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.00 phi bin or 0.125 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.00 and 2.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.25 phi bin or 0.1051 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.25 and 3.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.50 phi bin or 0.08839 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.50 and 3.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.75 phi bin or 0.07433 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.75 and 3.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.00 phi bin or 0.0625 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.00 and 3.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.25 phi bin or 0.052556 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.25 and 4.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.50 phi bin or 0.044194 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.50 and 4.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.75 phi bin or 0.037163 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.75 and 4.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.00 phi bin or 0.03125 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.00 and 4.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.25 phi bin or 0.02628 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.25 and 5.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.50 phi bin or 0.0221 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.50 and 5.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.75 phi bin or 0.01858 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.75 and 5.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.00 phi bin or 0.01563 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.00 and 5.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.25 phi bin or 0.01314 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.25 and 6.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.50 phi bin or 0.01105 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.50 and 6.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.75 phi bin or 0.00929 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.75 and 6.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.00 phi bin or 0.00781 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.00 and 6.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.25 phi bin or 0.00657 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.25 and 7.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.50 phi bin or 0.00552 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.50 and 7.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.75 phi bin or 0.00465 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.75 and 7.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.00 phi bin or 0.00391 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.00 and 7.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.25 phi bin or 0.00329 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.25 and 8.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.50 phi bin or 0.00276 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.50 and 8.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.75 phi bin or 0.00232 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.75 and 8.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.00 phi bin or 0.00195 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.00 and 8.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.25 phi bin or 0.00164 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.25 and 9.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.50 phi bin or 0.00138mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.50 and 9.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.75 phi bin or 0.00116 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.75 and 9.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.00 phi bin or 0.00098 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.00 and 9.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.25 phi bin or 0.00082 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.25 and 10.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.50 phi bin or 0.00069 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.50 and 10.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.75 phi bin or 0.00058 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.75 and 10.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 11.00 phi bin or 0.00049 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 11.00 and 10.75 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 11.25 phi bin or 0.0004 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 11.25 and 11.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 11.50 phi bin or 0.00035 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 11.50 and 11.25 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 12.00 phi bin or 0.000241 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 12.00 and 11.50 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 13.00 phi bin or 0.00012 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 13.00 and 12.00 phi. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Gravel Attribute_Definition: percent of sample greater than 2 mm. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Sand Attribute_Definition: percent of sample less than 2 mm and greater than 63 microns. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Silt Attribute_Definition: percent of sample less than 63 microns and greater than 4 microns. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Clay Attribute_Definition: percent of sample less than 4 microns. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Mud Attribute_Definition: percent of sample less than 63 microns. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 100 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Gravel to Sand Ratio Attribute_Definition: ratio of percent gravel in sample to percent sand. Values of INFINITE indicate that the sample contained 100 percent gravel. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 144.523 Attribute_Units_of_Measure: dimensionless Attribute: Attribute_Label: Sand to Silt Ratio Attribute_Definition: ratio of percent sand in sample to percent silt. Values of N/A indicate that the sample contained 100 percent gravel. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.884 Range_Domain_Maximum: 308.476 Attribute_Units_of_Measure: dimensionless Attribute: Attribute_Label: Silt to Clay Ratio Attribute_Definition: ratio of percent silt in sample to percent clay. Values of N/A indicate that the sample contained 100 percent gravel. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.136 Range_Domain_Maximum: 5.469 Attribute_Units_of_Measure: dimensionless Attribute: Attribute_Label: Sand to Clay Ratio Attribute_Definition: ratio of percent sand in sample to percent clay. Values of N/A indicate that the sample contained 100 percent gravel. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 7.239 Range_Domain_Maximum: 591.203 Attribute_Units_of_Measure: dimensionless Attribute: Attribute_Label: Sand to Mud Ratio Attribute_Definition: ratio of percent sand in sample to percent mud. Values of N/A indicate that the sample contained 100 percent gravel. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.495 Range_Domain_Maximum: 202.708 Attribute_Units_of_Measure: dimensionless Attribute: Attribute_Label: Gravel to Mud Ratio Attribute_Definition: ratio of percent gravel in sample to percent mud. Values of INFINITE indicate that the sample contained 100 percent gravel. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 2856.115 Attribute_Units_of_Measure: dimensionless Attribute: Attribute_Label: D5 Phi Attribute_Definition: Phi size at D5 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.569 Range_Domain_Maximum: 2.33 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D10 Phi Attribute_Definition: Phi size at D10 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.892 Range_Domain_Maximum: 2.528 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D16 Phi Attribute_Definition: Phi size at D16 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.977 Range_Domain_Maximum: 2.8 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D25 Phi Attribute_Definition: Phi size at D25 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.946 Range_Domain_Maximum: 3.053 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D50 Phi Attribute_Definition: Phi size at D50, or average particle diameter by mass, for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.951 Range_Domain_Maximum: 3.653 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D75 Phi Attribute_Definition: Phi size at D75 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.977 Range_Domain_Maximum: 5.279 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D84 Phi Attribute_Definition: Phi size at D84 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.887 Range_Domain_Maximum: 6.721 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D90 Phi Attribute_Definition: Phi size at D90 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.992 Range_Domain_Maximum: 7.663 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D95 Phi Attribute_Definition: Phi size at D95 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.952 Range_Domain_Maximum: 8.807 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D5 mm Attribute_Definition: mm size at D5 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0022 Range_Domain_Maximum: 3.8704 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: D10 mm Attribute_Definition: mm size at D10 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0049 Range_Domain_Maximum: 3.9778 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: D16 mm Attribute_Definition: mm at D16 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0095 Range_Domain_Maximum: 3.6978 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: D25 mm Attribute_Definition: mm size at D25 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0258 Range_Domain_Maximum: 3.9372 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: D50 mm Attribute_Definition: mm at D50, or median particle diameter by mass, for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0795 Range_Domain_Maximum: 3.8662 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: D75 mm Attribute_Definition: mm size at D75 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.1205 Range_Domain_Maximum: 3.8525 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: D84 mm Attribute_Definition: mm at D84 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.1436 Range_Domain_Maximum: 3.938 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: D90 mm Attribute_Definition: mm at D90 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.1734 Range_Domain_Maximum: 3.7114 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: D95 mm Attribute_Definition: mm at D95 for sample. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.1989 Range_Domain_Maximum: 2.9669 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: F-W Median Phi Attribute_Definition: Phi size median for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.95093 Range_Domain_Maximum: 3.652588 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Mean Phi Attribute_Definition: Phi size mean for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.46263 Range_Domain_Maximum: 4.389411 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Sorting Phi Attribute_Definition: sorting for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.28297 Range_Domain_Maximum: 2.589973 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Skewness Phi Attribute_Definition: skewness for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.62019 Range_Domain_Maximum: 2.396487 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Kurtosis Phi Attribute_Definition: Kurtosis for sample by Folk and Ward (1957) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.37261 Range_Domain_Maximum: 4.104749 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Median Phi Attribute_Definition: Phi size median for sample by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.95093 Range_Domain_Maximum: 3.652588 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Mean Phi Attribute_Definition: Phi size mean for sample by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -1.51062 Range_Domain_Maximum: 4.757822 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Sorting Phi Attribute_Definition: sorting for sample by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.37606 Range_Domain_Maximum: 2.491474 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Skew 16-84 Phi Attribute_Definition: skewness for sample (D16-D84) by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.66576 Range_Domain_Maximum: 3.024152 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Skew 05-95 Phi Attribute_Definition: skewness for sample (D5-D95) by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -3.11471 Range_Domain_Maximum: 7.378242 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Kurtosis Phi Attribute_Definition: Kurtosis for sample by Inman (1952) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -3.46263 Range_Domain_Maximum: 4.220718 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Trask Median mm Attribute_Definition: mm median for sample by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.079517 Range_Domain_Maximum: 3.866245 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: Trask Mean mm Attribute_Definition: Phi size mean for sample by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.073129 Range_Domain_Maximum: 3.111123 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: Trask Sorting mm Attribute_Definition: sorting for sample by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.761832 Range_Domain_Maximum: 3.9989 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: Trask Skewness mm Attribute_Definition: skewness for sample (D16-D84) by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.045899 Range_Domain_Maximum: 6.985931 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: Trask Kurtosis mm Attribute_Definition: skewness for sample (D5-D95) by Trask (1930) method. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -2.70275 Range_Domain_Maximum: 0.757601 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: Mean Phi Attribute_Definition: moment measure of mean. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -2.125 Range_Domain_Maximum: 4.309573 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Mean mm Attribute_Definition: moment measure of variance. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.05043 Range_Domain_Maximum: 4.362031 Attribute_Units_of_Measure: mm Attribute: Attribute_Label: Variance Phi Attribute_Definition: moment measure of skewness. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00 Range_Domain_Maximum: 7.567747 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Std. Dev. Phi Attribute_Definition: moment measure of kurtosis. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00 Range_Domain_Maximum: 2.750954 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Skewness Phi Attribute_Definition: moment measure of skewness. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.88689 Range_Domain_Maximum: 105.395 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Kurtosis Phi Attribute_Definition: moment measure of kurtosis. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00 Range_Domain_Maximum: 11109.1112 Attribute_Units_of_Measure: Phi size Overview_Description: Entity_and_Attribute_Overview: The first line of the csv file is a header line. Entity_and_Attribute_Detail_Citation: U.S. Geological Survey Distribution_Information: Distributor: Contact_Information: Contact_Person_Primary: Contact_Person: U.S. Geological Survey - Science Base Contact_Organization: U.S. Geological Survey Contact_Address: Address_Type: mailing and physical Address: Denver Federal Center, Building 810, Mail Stop 302 City: Denver State_or_Province: CO Postal_Code: 80225 Country: USA Contact_Voice_Telephone: 1-888-275-8747 Contact_Electronic_Mail_Address: sciencebase@usgs.gov Resource_Description: Surface-sediment grain-size data are available as a comma-delimited text file (ew19_grainsize.csv), along with associated FGDC-compliant metadata. Distribution_Liability: Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: comma-delimited text Format_Version_Number: MATLAB Version: 9.8.0.1396136 (R2020a) Format_Information_Content: comma-delimited text file File_Decompression_Technique: No compression applied Transfer_Size: 0.099 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/6578f9ced34e952b22747abf?name=ew19_grainsize.csv Network_Resource_Name: https://www.sciencebase.gov/catalog/item/6578f9ced34e952b22747abf Network_Resource_Name: https://doi.org/10.5066/P9CR1ABQ Network_Resource_Name: https://doi.org/10.5066/F72N51GC Access_Instructions: Data can be downloaded using the Network_Resource_Name links. The first link is a direct link to download the surface grain-size data. The second link points to a landing page with the grain-size data and metadata. The third link points to the landing page for data release containing links to all data collected during the survey. The fourth link points to a landing page for all of the Elwha coastal surveys. Fees: None Metadata_Reference_Information: Metadata_Date: 20241112 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-427-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998