Metadata: Identification_Information: Citation: Citation_Information: Originator: Samantha C. McGill Originator: Lukas WinklerPrins Originator: Angela C. Tan Publication_Date: 20210915 Title: Grain size, bulk density, and organic carbon of sediment cores from San Pablo Bay and Grizzly Bay, California, 2020 Geospatial_Data_Presentation_Form: Comma-separated values Series_Information: Series_Name: data release Issue_Identification: doi:10.5066/P9P7I65U Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, California Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/P9N88U5G Online_Linkage: https://www.sciencebase.gov/catalog/item/60a451d9d34ea221ce45ebe9 Larger_Work_Citation: Citation_Information: Originator: Samantha C. McGill Originator: Jessica R. Lacy Originator: Joanne C. T. Ferreira Originator: Rachel M. Allen Originator: Lukas WinklerPrins Originator: Andrew W. Stevens Originator: Angela C. Tan Publication_Date: 2021 Title: Hydrodynamic and sediment transport data from San Pablo Bay and Grizzly Bay, California, 2020 Series_Information: Series_Name: data release Issue_Identification: doi:10.5066/P9N88U5G Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, California Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/P9N88U5G Description: Abstract: Bed sediment samples were collected in San Pablo Bay and Grizzly Bays on eight days from January through September 2020, to analyze for sediment properties including bulk density, particle size distribution, and percent organic carbon. Sediment samples were collected from a small vessel near pre-established USGS instrument moorings using a Gomex box corer that was subsampled with three push cores (37 mm in diameter) per Gomex core. Six subsamples were collected from the top 5 centimeters (cm) of each push core, a few push cores included the top 8 cm. The top two subsamples were each 0.5 cm thick, and all following subsamples were each 1 cm thick. Push core samples from the first, third, and fifth centimeter depth were analyzed for grain size and percent organic carbon, while all 6 sections were analyzed for bulk density. Data are provided in a comma-delimited values spreadsheet. These data were collected as part of a collaborative project with the USGS California Water Science Center and the USGS Water Mission Area on physical and biological controls on sediment erodibility, funded by the USGS Priority Ecosystems Program for San Francisco Bay and Delta and the USGS Coastal Marine Hazards and Resources Program. Purpose: These data were collected to investigate temporal variability in physical properties of the sediment bed that may influence erodibility. They were collected as part of a collaborative study with the USGS California Water Science Center and the USGS Water Resource Mission Area investigating physical and biological controls on bed erodibility. These data are intended for researchers, students, policy makers, and the general public. Supplemental_Information: Information about the data collection field activities can be found at: https://cmgds.marine.usgs.gov/fan_info.php?fan=2020-603-FA https://cmgds.marine.usgs.gov/fan_info.php?fan=2020-630-FA Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20200122 Ending_Date: 20200923 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -122.39122 East_Bounding_Coordinate: -121.04072 North_Bounding_Coordinate: 38.11671 South_Bounding_Coordinate: 38.08363 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: oceans Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: push coring Theme_Keyword: grab sampling Theme_Keyword: sea-floor characteristics Theme_Keyword: grain-size analysis Theme_Keyword: unconsolidated deposits Theme_Keyword: sediment transport Theme_Keyword: bulk density Theme_Keyword: carbon Theme_Keyword: dissolved organic compounds Theme: Theme_Keyword_Thesaurus: Data Categories for Marine Planning Theme_Keyword: Substrate Theme: Theme_Keyword_Thesaurus: Marine Realms Information Bank (MRIB) keywords Theme_Keyword: Sediment Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: USGS Theme_Keyword: U.S. Geological Survey Theme_Keyword: PCMSC Theme_Keyword: Pacific Coastal and Marine Science Center Theme_Keyword: CMHRP Theme_Keyword: Coastal and Marine Hazards and Resources Program Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:60a451d9d34ea221ce45ebe9 Place: Place_Keyword_Thesaurus: Geographic Names Information System Place_Keyword: San Francisco Bay Place_Keyword: San Pablo Bay Place_Keyword: Grizzly Bay Place_Keyword: State of California Access_Constraints: None Use_Constraints: USGS-authored or produced data and information are in the public domain from the U.S. Government and are freely redistributable with proper metadata and source attribution. Please recognize and acknowledge the U.S. Geological Survey (USGS) as the originator of the dataset and in products derived from these data. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: https://www.sciencebase.gov/catalog/file/get/60a451d9d34ea221ce45ebe9?name=ERO20_study_area.jpg &allowOpen=true Browse_Graphic_File_Description: Digital elevation model (DEM) of study area showing locations of USGS moorings in San Pablo Bay (PBM) and Grizzly Bay (GBM). Browse_Graphic_File_Type: JPEG Cross_Reference: Citation_Information: Originator: Robert Louis Folk Originator: William C. Ward Publication_Date: 1957 Title: Brazos River bar; a study in the significance of grain size parameters Series_Information: Series_Name: Journal article Issue_Identification: Journal of Sedimentary Research, v. 27, n. 1, p. 3-26 Publication_Information: Publication_Place: Boulder, CO Publisher: SEPM Society for Sedimentary Geology Online_Linkage: https://doi.org/10.1306/74D70646-2B21-11D7-8648000102C1865D Cross_Reference: Citation_Information: Originator: Douglas Lamar Inman Publication_Date: 1952 Title: Measures for describing the size distribution of sediments Series_Information: Series_Name: Journal article Issue_Identification: Journal of Sedimentary Research, v. 22, n. 3, p. 125-145 Publication_Information: Publication_Place: Boulder, CO Publisher: SEPM Society for Sedimentary Geology Online_Linkage: https://doi.org/10.1306/D42694DB-2B26-11D7-8648000102C1865D Cross_Reference: Citation_Information: Originator: Parker D. Trask Publication_Date: 1930 Title: Mechanical analyses of sediments by centrifuge Series_Information: Series_Name: Journal article Issue_Identification: Economic Geology, v. 26, n. 6, p. 581-599 Publication_Information: Publication_Place: Littleton, CO Publisher: Society of Economic Geologists (SEG) Online_Linkage: https://doi.org/10.2113/gsecongeo.25.6.581 Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: Data values are within the expected values. Logical_Consistency_Report: Data values are within the expected values. Completeness_Report: Dataset is considered complete for the information presented, as described in the abstract. Users are advised to read the rest of the metadata record carefully for additional details. Lineage: Process_Step: Process_Description: Subsamples were collected from the top 5 centimeters (cm) of push cores collected in San Pablo Bay and Grizzly Bay, California. The top two subsamples were each 0.5 cm thick, and all following subsamples were each 1 cm thick. Subsamples were placed into pre-weighed Whirl-pak bags. Process_Date: 20200923 Process_Step: Process_Description: Wet samples weights were measured, then samples were placed in a 60 degrees C oven until fully dried. Once samples were fully dried, they were placed in a desiccator for an hour, then dry weights were measured. Samples were then placed back in the oven for another 4 hours at 60 degrees C, moved to the desiccator for 1 hour, and reweighed. Samples were considered dry when their weights were equal to or less than 0.004g of their previously recorded dry weight. The bulk density reported here was calculated with the formula: bulk density = (water density * sediment density) / (water density + (sediment density - water density) * water content), where water density is 1 g/cm3 and sediment density is 2.65 g/cm3. Measurements were made in the USGS Pacific Coastal and Marine Science Center sediment lab. Process_Date: 20200925 Process_Step: Process_Description: The grain-size distributions of samples were determined in the USGS Pacific Coastal and Marine Science Center sediment lab. Approximately 20 g of sediment was subsampled and 10 mL of 30 percent hydrogen peroxide was added to remove organic material in the sample. The sample was heated at 250 degrees C to remove any remaining hydrogen peroxide and was placed in an ultrasonic bath to liberate the fine fraction. Subsequently, the sample was centrifuged for 1.5 hours to remove soluble salts. Samples were funneled through a 1-mm and a 63-um sieve to separate the gravel (greater than 1 mm), sand (63 um to 1 mm), and mud (less than 63 um). The sand and gravel fractions were dried in an 80-degree C oven and weighed. Five mL of sodium hexametaphosphate was added to the mud fraction and a 20 mL aliquot was taken from a 1 L graduated cylinder to determine the weight of the mud. The particle-size distribution of the mud and sand fractions was analyzed separately using a Beckman Coulter LS 13 320, and the gravel, sand, and mud results were integrated into a single grain-size distribution for each sample. Where used, phi sizes are equal to the negative log base 1 of millimeter size. Process_Date: 20200629 Process_Step: Process_Description: Percent carbon measurements were made in the USGS Pacific Coastal and Marine Science Center sediment lab. To determine percent carbon in sediment samples, approximately 5g of sample sediment was sub-sampled and dried in an 80 degrees C oven overnight. Samples were then pulverized into a fine powder. To obtain percent total carbon (TC), approximately 20mg of the pulverized sample was weighed and wrapped in an aluminum tin. A UIC CM 5200 furnace attached to a CM 5015 coulometer was used to incinerate the samples at 950 degree C which converted the produced CO2 into a value to obtain total carbon as percent dry weight. For percent total inorganic carbon (TIC), approximately 20mg of sample was weighed into and placed in glass sample tubes which were loaded into a UIC CM 5230 acid digester attached to a CM 5015 coulometer. The samples were digested with 2mL perchloric acid and the produced CO2 was measured to obtain a total inorganic carbon value as percent dry weight. To determine percent calcium carbonate of a sample, the percent TIC value was multiplied by 8.333. The percent total organic carbon (TOC) value was determined by subtracting the percent TIC value from the percent TC value. Two analyses were run per system and the results were averaged. Process_Date: 20200925 Spatial_Data_Organization_Information: Indirect_Spatial_Reference: Data were collected in San Pablo Bay and Grizzly Bay, California Direct_Spatial_Reference_Method: Point Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point Point_and_Vector_Object_Count: 543 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 1.0E-5 Longitude_Resolution: 1.0E-5 Geographic_Coordinate_Units: Decimal degrees Geodetic_Model: Horizontal_Datum_Name: World Geodetic System 1984 (WGS84) Ellipsoid_Name: WGS84 Semi-major_Axis: 6378137.0 Denominator_of_Flattening_Ratio: 298.257223563 Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: ERO20_GS-BD-C.csv Entity_Type_Definition: Table containing attribute information associated with the dataset Entity_Type_Definition_Source: Producer defined Attribute: Attribute_Label: FAN ID Attribute_Definition: U.S. Geological Survey field activity number (FAN). Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 2020-603-FA Enumerated_Domain_Value_Definition: Samples collected during USGS field activity 2020-603-FA. Additional information about this field activity can be found at https://cmgds.marine.usgs.gov/fan_info.php?fan=2020-603-FA Enumerated_Domain_Value_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 2020-630-FA Enumerated_Domain_Value_Definition: Samples collected during USGS field activity 2020-603-FA. Additional information about this field activity can be found at https://cmgds.marine.usgs.gov/fan_info.php?fan=2020-630-FA Enumerated_Domain_Value_Definition_Source: Producer defined Attribute: Attribute_Label: Bag ID Attribute_Definition: Sample bag identifier Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Sequentially numbered unique identifier for sample bags; assigned in the lab. Attribute: Attribute_Label: Sample ID Attribute_Definition: Sample identifier Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique identifier for samples; assigned in the field. Attribute: Attribute_Label: Lab ID Attribute_Definition: Sample identifier for sediment lab in YY-FFFFF-XX format, where YY is the 2-digit year (for example 20=2020), FFFFF is the 5-digit field-activity-number (FAN) ID code, and XX is a sequential number given to the sample in the lab. "NA" indicates that no value was assigned. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique identifier for samples; assigned in the sediment lab. Attribute: Attribute_Label: Date Collected Attribute_Definition: Date in month/day/year format of sample collection. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 01/22/2020 Range_Domain_Maximum: 09/23/2020 Attribute_Units_of_Measure: Date in month/day/year format Attribute: Attribute_Label: Time (PDT) Attribute_Definition: Time of sample collection, in hours:minutes:seconds format, Pacific Daylight Time (PDT), Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 08:48:00 Range_Domain_Maximum: 12:16:00 Attribute_Units_of_Measure: hours:minutes:seconds format, Pacific Daylight Time (PDT) Attribute: Attribute_Label: Site Attribute_Definition: Code identifying sampling locations. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: GBM Enumerated_Domain_Value_Definition: Grizzly Bay mooring Enumerated_Domain_Value_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: PBM Enumerated_Domain_Value_Definition: San Pablo Bay mooring Enumerated_Domain_Value_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: PBM1 Enumerated_Domain_Value_Definition: San Pablo Bay mooring 1 Enumerated_Domain_Value_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: GBM1 Enumerated_Domain_Value_Definition: Grizzly Bay mooring 1 Enumerated_Domain_Value_Definition_Source: Producer defined Attribute: Attribute_Label: Latitude Attribute_Definition: Latitude of sample location in decimal degrees, north. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 38.08336 Range_Domain_Maximum: 38.11671 Attribute_Units_of_Measure: Decimal degrees Attribute: Attribute_Label: Longitude Attribute_Definition: Longitude of sample location in decimal degrees, east. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -122.39110 Range_Domain_Maximum: -122.04072 Attribute_Units_of_Measure: Decimal degrees Attribute: Attribute_Label: Core Depth (cm) Attribute_Definition: The midpoint of the depth into the sediment bed of the sample. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.25 Range_Domain_Maximum: 5.5 Attribute_Units_of_Measure: centimeters Attribute: Attribute_Label: Processing Notes Attribute_Definition: Relevant information regarding the sample during its processing. "NA" indicates that no additional information was noted. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique note of relevant information regarding sample Attribute: Attribute_Label: Wt. percent in -4.00 phi bin or 16 mm bin Attribute_Definition: Weight percent of sample with grain diameter greater than -4.00 phi, or 16 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -3.75 phi bin or 13.5 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -4.00 and -3.75 phi, or 13.5 and 16 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -3.50 phi bin or 11.2 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -3.75 and -3.50 phi, or 11.2 and 13.5 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -3.25 phi bin or 9.51 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -3.50 and -3.25 phi, or 9.51 and 11.2 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -3.00 phi bin or 8 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -3.25 and -3.00 phi, or 8 and 9.51 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -2.75 phi bin or 6.73 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -3.00 and -2.75 phi, or 6.73 and 8 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -2.50 phi bin or 5.66 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -2.75 and -2.50 phi, or 5.66 and 6.73 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -2.25 phi bin or 4.76 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -2.50 and -2.25 phi, or 4.76 and 5.66 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -2.00 phi bin or 4 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -2.25 and -2.00 phi, or 4 and 4.76 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -1.75 phi bin or 3.36 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -2.00 and -1.75 phi, or 3.36 and 4 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -1.50 phi bin or 2.83 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -1.75 and -1.50 phi, or 2.83 and 3.36 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -1.25 phi bin or 2.38 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -1.50 and -1.25 phi, or 2.38 and 2.83 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -1.00 phi bin or 2 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -1.25 and -1.00 phi, or 2 and 2.38 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -0.75 phi bin or 1.68 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -1.00 and -0.75 phi, or 1.68 and 2 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -0.50 phi bin or 1.41 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -0.75 and -0.50 phi, or 1.41 and 1.68 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.002921 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -0.25 phi bin or 1.19 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -0.50 and -0.25 phi, or 1.19 and 1.41 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.086746 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.00 phi bin or 1 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -0.25 and 0.00 phi, or 1 and 1.19 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.190493 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.25 phi bin or 0.8409 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.00 and 0.25 phi, or 0.8409 and 1 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.427009 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.50 phi bin or 0.7071 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.25 and 0.50 phi, or 0.7071 and 0.8409 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.437938 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.75 phi bin or 0.5946 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.50 and 0.75 phi, or 0.5946 and 0.7071 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.511334 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.00 phi bin or 0.5 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.75 and 1.00 phi, or 0.5 and 0.5946 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.520305 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.25 phi bin or 0.4204 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.00 and 1.25 phi, or 0.4204 and 0.5 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.257013 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.50 phi bin or 0.3536 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.25 and 1.50 phi, or 0.3536 and 0.4204 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.285271 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.75 phi bin or 0.2973 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.50 and 1.75 phi, or 0.2973 and 0.3536 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.143532 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.00 phi bin or 0.25 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.75 and 2.00 phi, or 0.25 and 0.2973 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.130733 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.25 phi bin or 0.2102 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.00 and 2.25 phi, or 0.2102 and 0.25 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.357539 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.50 phi bin or 0.1768 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.25 and 2.50 phi, or 0.1768 and 0.2102 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00047 Range_Domain_Maximum: 0.970201 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.75 phi bin or 0.1487 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.50 and 2.75 phi, or 0.1487 and 0.1768 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.024004 Range_Domain_Maximum: 1.354404 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.00 phi bin or 0.125 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.75 and 3.00 phi, or 0.125 and 0.1487 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.06170 Range_Domain_Maximum: 1.208347 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.25 phi bin or 0.1051 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.00 and 3.25 phi, or 0.1051 and 0.125 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.045002 Range_Domain_Maximum: 1.102551 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.50 phi bin or 0.08839 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.25 and 3.50 phi, or 0.08839 and 0.1051 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.042995 Range_Domain_Maximum: 1.626485 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.75 phi bin or 0.07433 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.50 and 3.75 phi, or 0.07433 and 0.08839 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.11998 Range_Domain_Maximum: 2.191053 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.00 phi bin or 0.0625 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.75 and 4.00 phi, or 0.0625 and 0.07433 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.219964 Range_Domain_Maximum: 2.75824 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.25 phi bin or 0.052556 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.00 and 4.25 phi, or 0.052556 and 0.0625 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.439928 Range_Domain_Maximum: 3.149584 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.50 phi bin or 0.044194 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.25 and 4.50 phi, or 0.044194 and 0.052556 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.049828 Range_Domain_Maximum: 4.148409 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.75 phi bin or 0.037163 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.50 and 4.75 phi, or 0.037163 and 0.044194 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.119652 Range_Domain_Maximum: 4.911693 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.00 phi bin or 0.03125 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.75 and 5.00 phi, or 0.03125 and 0.037163 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.290284 Range_Domain_Maximum: 5.384749 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.25 phi bin or 0.02628 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.00 and 5.25 phi, or 0.02628 and 0.03125 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.661145 Range_Domain_Maximum: 5.411212 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.50 phi bin or 0.0221 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.25 and 5.50 phi, or 0.0221 and 0.02628 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.593078 Range_Domain_Maximum: 5.370107 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.75 phi bin or 0.01858 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.50 and 5.75 phi, or 0.01858 and 0.0221 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.379939 Range_Domain_Maximum: 5.220104 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.00 phi bin or 0.01563 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.75 and 6.00 phi, or 0.01563 and 0.01858 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.38906 Range_Domain_Maximum: 5.290291 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.25 phi bin or 0.01314 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.00 and 6.25 phi, or 0.01314 and 0.01563 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.706472 Range_Domain_Maximum: 5.500302 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.50 phi bin or 0.01105 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.25 and 6.50 phi, or 0.01105 and 0.01314 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.89798 Range_Domain_Maximum: 5.579992 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.75 phi bin or 0.00929 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.50 and 6.75 phi, or 0.00929 and 0.01105 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.925414 Range_Domain_Maximum: 5.540478 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.00 phi bin or 0.00781 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.75 and 7.00 phi, or 0.00781 and 0.00929 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.924819 Range_Domain_Maximum: 5.370463 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.25 phi bin or 0.00657 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.00 and 7.25 phi, or 0.00657 and 0.00781 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.809685 Range_Domain_Maximum: 5.130442 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.50 phi bin or 0.00552 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.25 and 7.50 phi, or 0.00552 and 0.00657 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.721088 Range_Domain_Maximum: 4.920424 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.75 phi bin or 0.00465 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.50 and 7.75 phi, or 0.00465 and 0.00552 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.524205 Range_Domain_Maximum: 4.579248 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.00 phi bin or 0.00391 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.75 and 8.00 phi, or 0.00391 and 0.00465 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.323889 Range_Domain_Maximum: 4.423117 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.25 phi bin or 0.00329 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.00 and 8.25 phi, or 0.00329 and 0.00391 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.096361 Range_Domain_Maximum: 4.234606 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.50 phi bin or 0.00276 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.25 and 8.50 phi, or 0.00276 and 0.00329 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.799585 Range_Domain_Maximum: 3.877561 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.75 phi bin or 0.00232 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.50 and 8.75 phi, or 0.00232 and 0.00276 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.591842 Range_Domain_Maximum: 3.639612 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.00 phi bin or 0.00195 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.75 and 9.00 phi, or 0.00195 and 0.00232 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.413777 Range_Domain_Maximum: 3.411625 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.25 phi bin or 0.00164 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.00 and 9.25 phi, or 0.00164 and 0.00195 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.265389 Range_Domain_Maximum: 3.223313 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.50 phi bin or 0.00138 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.25 and 9.50 phi, or 0.00138 and 0.00164 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.136786 Range_Domain_Maximum: 3.074644 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.75 phi bin or 0.00116 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.50 and 9.75 phi, or 0.00116 and 0.00138 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.047753 Range_Domain_Maximum: 2.985451 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.99 phi bin or 0.00098 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.75 and 9.99 phi, or 0.00098 and 0.00116 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.859795 Range_Domain_Maximum: 2.757387 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.25 phi bin or 0.00082 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.99 and 10.25 phi, or 0.00082 and 0.00098 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.780655 Range_Domain_Maximum: 2.688029 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.50 phi bin or 0.00069 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.25 and 10.50 phi, or 0.00069 and 0.00082 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.483879 Range_Domain_Maximum: 2.27148 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.75 phi bin or 0.00058 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.50 and 10.75 phi, or 0.00058 and 0.00069 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.196996 Range_Domain_Maximum: 1.844998 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.99 phi bin or 0.00049 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.75 and 10.99 phi, or 0.00049 and 0.00058 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.830972 Range_Domain_Maximum: 1.299447 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 11.25 phi bin or 0.0004 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.99 and 11.25 phi, or 0.0004 and 0.00049 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.474841 Range_Domain_Maximum: 0.734046 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 11.48 phi bin or 0.00035 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 11.25 and 11.48 phi, or 0.00035 and 0.0004 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.108818 Range_Domain_Maximum: 0.168627 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 12.02 phi bin or 0.000241 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 11.50 and 12.02 phi, or 0.000241 and 0.00035 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 13.02 phi bin or 0.00012 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 12.02 and 13.02 phi, or 0.00012 and 0.000241 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Gravel Attribute_Definition: Percent of sample greater than 2 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Percent Sand Attribute_Definition: Percent of sample less than 2 mm and greater than 63 microns, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.666314 Range_Domain_Maximum: 9.162959 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Percent Silt Attribute_Definition: Percent of sample less than 63 microns and greater than 4 microns, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 60.28536 Range_Domain_Maximum: 70.53468 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Percent Clay Attribute_Definition: Percent of sample less than 4 microns, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 25.08745 Range_Domain_Maximum: 36.21084 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Percent Mud Attribute_Definition: Percent of sample less than 63 microns, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 90.83704 Range_Domain_Maximum: 99.33369 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Gravel to Sand Ratio Attribute_Definition: ratio of percent gravel in sample to percent sand. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Sand to Silt Ratio Attribute_Definition: ratio of percent sand in sample to percent silt. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.01 Range_Domain_Maximum: 0.149 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Silt to Clay Ratio Attribute_Definition: ratio of percent silt in sample to percent clay. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.685 Range_Domain_Maximum: 2.805 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Sand to Clay Ratio Attribute_Definition: ratio of percent sand in sample to percent clay. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.02 Range_Domain_Maximum: 0.322 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Sand to Mud Ratio Attribute_Definition: ratio of percent sand in sample to percent mud. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.007 Range_Domain_Maximum: 0.101 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Gravel to Mud Ratio Attribute_Definition: ratio of percent gravel in sample to percent mud. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: D5 Phi Attribute_Definition: Phi size at D5 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.279 Range_Domain_Maximum: 4.815 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D10 Phi Attribute_Definition: Phi size at D10 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4.082 Range_Domain_Maximum: 5.155 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D16 Phi Attribute_Definition: Phi size at D16 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4.542 Range_Domain_Maximum: 5.488 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D25 Phi Attribute_Definition: Phi size at D25 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 5.096 Range_Domain_Maximum: 5.957 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D50 Phi Attribute_Definition: Phi size at D50 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.42 Range_Domain_Maximum: 7.243 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D75 Phi Attribute_Definition: Phi size at D75 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 8.006 Range_Domain_Maximum: 8.715 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D84 Phi Attribute_Definition: Phi size at D84 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 8.814 Range_Domain_Maximum: 9.4 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D90 Phi Attribute_Definition: Phi size at D90 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 9.476 Range_Domain_Maximum: 9.907 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D95 Phi Attribute_Definition: Phi size at D95 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 10.121 Range_Domain_Maximum: 10.396 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D5 mm Attribute_Definition: mm size at D5 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0007 Range_Domain_Maximum: 0.0009 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D10 mm Attribute_Definition: mm size at D10 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.001 Range_Domain_Maximum: 0.0014 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D16 mm Attribute_Definition: mm size at D16 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0015 Range_Domain_Maximum: 0.0022 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D25 mm Attribute_Definition: mm size at D25 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0024 Range_Domain_Maximum: 0.0039 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D50 mm Attribute_Definition: mm size at D50 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0066 Range_Domain_Maximum: 0.0117 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D75 mm Attribute_Definition: mm size at D75 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0161 Range_Domain_Maximum: 0.0292 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D84 mm Attribute_Definition: mm size at D84 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0223 Range_Domain_Maximum: 0.0429 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D90 mm Attribute_Definition: mm size at D90 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0281 Range_Domain_Maximum: 0.0591 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D95 mm Attribute_Definition: mm size at D95 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0355 Range_Domain_Maximum: 0.103 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: F-W Median Attribute_Definition: Phi size median for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.420187 Range_Domain_Maximum: 7.24308 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Mean Attribute_Definition: Phi size mean for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.64974 Range_Domain_Maximum: 7.288797 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Sorting Attribute_Definition: sorting for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.769086 Range_Domain_Maximum: 2.160422 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Skewness Attribute_Definition: skewness for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.0076 Range_Domain_Maximum: 0.19277 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Kurtosis Attribute_Definition: Kurtosis for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.813398 Range_Domain_Maximum: 0.930664 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Median Attribute_Definition: Phi size median for sample by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.420187 Range_Domain_Maximum: 7.24308 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Mean Attribute_Definition: Phi size mean for sample by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.764517 Range_Domain_Maximum: 7.362267 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Sorting Attribute_Definition: sorting for sample by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.873799 Range_Domain_Maximum: 2.297132 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Skew 16-84 Attribute_Definition: skewness for sample (D16-D84) by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.01831 Range_Domain_Maximum: 0.17623 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Skew 05-95 Attribute_Definition: skewness for sample (D5-D95) by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.03982 Range_Domain_Maximum: 0.322598 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Kurtosis Attribute_Definition: Kurtosis for sample by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.424228 Range_Domain_Maximum: 0.597806 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Trask Median Attribute_Definition: mm size median for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.006601 Range_Domain_Maximum: 0.011677 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Trask Mean Attribute_Definition: mm size mean for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.009399 Range_Domain_Maximum: 0.016173 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Trask Sorting Attribute_Definition: sorting for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.440853 Range_Domain_Maximum: 3.124794 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Trask Skewness Attribute_Definition: skewness for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.789138 Range_Domain_Maximum: 1.113217 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Trask Kurtosis Attribute_Definition: kurtosis for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.212462 Range_Domain_Maximum: 0.270041 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Mean Phi Attribute_Definition: phi size mean for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.663778 Range_Domain_Maximum: 7.285555 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Mean mm Attribute_Definition: mm size mean for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00641 Range_Domain_Maximum: 0.009863 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Variance Phi Attribute_Definition: variance for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.907115 Range_Domain_Maximum: 4.66761 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Std. Dev. Phi Attribute_Definition: standard deviation for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.705026 Range_Domain_Maximum: 2.160465 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Skewness Phi Attribute_Definition: skewness for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.41391 Range_Domain_Maximum: 0.402086 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Kurtosis Phi Attribute_Definition: kurtosis for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.094155 Range_Domain_Maximum: 3.330154 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Bag Weight (g) Attribute_Definition: The weight of the empty sample bag. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.195 Range_Domain_Maximum: 3.3806 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Bag and Wet Sediment Weight (g) Attribute_Definition: The weight of the initial wet sample, as it was collected in the sample bag. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 8.3568 Range_Domain_Maximum: 20.8725 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Bag and Dry Sediment Weight (g) Attribute_Definition: The weight of the dry sample including the weight of its sample bag. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4.642 Range_Domain_Maximum: 11.643 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Dry Sediment Weight (g) Attribute_Definition: The weight of the dried sediment in the sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.322 Range_Domain_Maximum: 8.395 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Water Weight (g) Attribute_Definition: The weight of the water from the sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.546 Range_Domain_Maximum: 10.498 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Bulk Density (g/cm^3) Attribute_Definition: The dry bulk density of the sample, calculated as the mass of the dry sediment divided by the volume of the initial sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.175061 Range_Domain_Maximum: 1.447867 Attribute_Units_of_Measure: grams per cubic centimeter Attribute: Attribute_Label: Percent Total Carbon Attribute_Definition: Total weight percentage of organic carbon for sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.016 Range_Domain_Maximum: 2.568 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Total Organic Carbon Attribute_Definition: Total weight percentage of total carbon for sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.986 Range_Domain_Maximum: 2.269 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Total Inorganic Carbon Attribute_Definition: Total weight percentage of inorganic carbon for sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.014 Range_Domain_Maximum: 0.485 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Calcium Carbonate Attribute_Definition: Total weight percentage of calcium carbonate (CaCO3) for sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.1194 Range_Domain_Maximum: 4.04 Attribute_Units_of_Measure: grams per cubic centimeter Distribution_Information: Distributor: Contact_Information: Contact_Person_Primary: Contact_Person: U.S. Geological Survey - ScienceBase Contact_Organization: U.S. Geological Survey Contact_Address: Address_Type: mailing and physical Address: Denver Federal Center, Building 810, Mail Stop 302 City: Denver State_or_Province: CO Postal_Code: 80225 Country: United States Contact_Voice_Telephone: 1-888-275-8747 Contact_Electronic_Mail_Address: sciencebase@usgs.gov Resource_Description: These data are available in csv format (ERO20_GS_BD_C.csv) along with CSDGM FGDC-compliant metadata. Distribution_Liability: Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: comma-delimited text Format_Version_Number: Microsoft Excel 2002 (12527.20988) 64-bit Format_Information_Content: zip file contains the csv table, associated metadata, and an image map of the study area showing sample locations, grain size summaries, and elevation model File_Decompression_Technique: No compression applied Transfer_Size: 0.422 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/5f405a0e82ce8df5b6cb4b28 Network_Resource_Name: https://www.sciencebase.gov/catalog/item/5f405a0e82ce8df5b6cb4b28 Network_Resource_Name: https://doi.org/10.5066/P9N88U5G Access_Instructions: Data can be downloaded using the Network_Resource_Name links. The first link is a direct link to download a zipped file of data, metadata, and a map showing sample locations. The second link points to the landing page for the data, metadata, and browse image. The third link points to the landing page for the entire data release, including links to pages of the various data files. Fees: None. Technical_Prerequisites: The data is available in comma-separated values (CSV) spreadsheet format. Text editing software can be used to open the file, as well as spreadsheet programs, such as Microsoft Excel. Metadata_Reference_Information: Metadata_Date: 20210915 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: PCMSC Science Data Coordinator Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Country: United States Contact_Voice_Telephone: 831-427-7520 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998