Metadata: Identification_Information: Citation: Citation_Information: Originator: Lukas WinklerPrins Originator: Angela C. Tan Publication_Date: 20201231 Title: Grain size, bulk density, and organic carbon of sediment cores from San Pablo Bay and Grizzly Bay, California, 2019 Geospatial_Data_Presentation_Form: Comma-separated values Series_Information: Series_Name: data release Issue_Identification: doi:10.5066/P9P7I65U Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, California Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/P9P7I65U Online_Linkage: https://www.sciencebase.gov/catalog/item/5f405a0e82ce8df5b6cb4b28 Larger_Work_Citation: Citation_Information: Originator: Jessica R. Lacy Originator: Samantha C. McGill Originator: Joanne C. T. Ferreira Originator: Rachel M. Allen Originator: Lukas WinklerPrins Originator: Angela C. Tan Publication_Date: 20201030 Title: Hydrodynamic and sediment transport data from San Pablo Bay and Grizzly Bay , California, 2019 Geospatial_Data_Presentation_Form: Digital Series_Information: Series_Name: data release Issue_Identification: doi:10.5066/P9P7I65U Publication_Information: Publication_Place: Pacific Coastal and Marine Science Center, Santa Cruz, California Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/P9P7I65U Description: Abstract: Bed sediment samples were collected in San Pablo Bay and Grizzly Bays on eight days from June through November 2019, to analyze for sediment properties including bulk density, particle size distribution, and percent organic carbon. Sediment samples were collected from a small vessel near pre-established USGS instrument moorings using a Gomex box corer that was subsampled with three push cores (37 mm in diameter) per Gomex core. Six subsamples were collected from the top 5 centimeters (cm) of each push core, a few push cores included the top 8 cm. The top two subsamples were each 0.5 cm thick, and all following subsamples were each 1 cm thick. Push core samples from the first, third, and fifth centimeter depth were analyzed for grain size and percent organic carbon, while all 6 sections were analyzed for bulk density. Data are provided in a comma-delimited values spreadsheet. These data were collected as part of a collaborative project with the USGS California Water Science Center and the USGS Water Mission Area on physical and biological controls on sediment erodibility, funded by the USGS Priority Ecosystems Program for San Francisco Bay and Delta and the USGS Coastal Marine Hazards and Resources Program. Purpose: These data were collected to investigate temporal variability in physical properties of the sediment bed that may influence erodibility. They were collected as part of a collaborative study with the USGS California Water Science Center and the USGS Water Resource Mission Area investigating physical and biological controls on bed erodibility. These data are intended for researchers, students, policy makers, and the general public. Supplemental_Information: Information about the data collection field activities can be found at: https://cmgds.marine.usgs.gov/fan_info.php?fan=2019-625-FA https://cmgds.marine.usgs.gov/fan_info.php?fan=2019-668-FA Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20190612 Ending_Date: 20191125 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -122.39110 East_Bounding_Coordinate: -121.04072 North_Bounding_Coordinate: 38.11671 South_Bounding_Coordinate: 38.08336 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: oceans Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: push coring Theme_Keyword: grab sampling Theme_Keyword: sea-floor characteristics Theme_Keyword: grain-size analysis Theme_Keyword: unconsolidated deposits Theme_Keyword: sediment transport Theme_Keyword: bulk density Theme_Keyword: carbon Theme_Keyword: dissolved organic compounds Theme: Theme_Keyword_Thesaurus: Data Categories for Marine Planning Theme_Keyword: Substrate Theme: Theme_Keyword_Thesaurus: Marine Realms Information Bank (MRIB) keywords Theme_Keyword: Sediment Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: USGS Theme_Keyword: U.S. Geological Survey Theme_Keyword: PCMSC Theme_Keyword: Pacific Coastal and Marine Science Center Theme_Keyword: CMHRP Theme_Keyword: Coastal and Marine Hazards and Resources Program Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:5f405a0e82ce8df5b6cb4b28 Place: Place_Keyword_Thesaurus: Geographic Names Information System Place_Keyword: San Francisco Bay Place_Keyword: San Pablo Bay Place_Keyword: Grizzly Bay Place_Keyword: State of California Access_Constraints: None Use_Constraints: USGS-authored or produced data and information are in the public domain from the U.S. Government and are freely redistributable with proper metadata and source attribution. Please recognize and acknowledge the U.S. Geological Survey (USGS) as the originator of the dataset and in products derived from these data. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Person: PCMSC Science Data Coordinator Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-4747 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: https://www.sciencebase.gov/catalog/file/get/5f497ad982ce4c3d122bbb15?name=ERO19_study_area.jpg &allowOpen=true Browse_Graphic_File_Description: Digital elevation model (DEM) of study area showing locations of USGS moorings in San Pablo Bay (PBM) and Grizzly Bay (GBM). Browse_Graphic_File_Type: JPEG Cross_Reference: Citation_Information: Originator: Robert Louis Folk Originator: William C. Ward Publication_Date: 1957 Title: Brazos River bar; a study in the significance of grain size parameters Series_Information: Series_Name: Journal article Issue_Identification: Journal of Sedimentary Research, v. 27, n. 1, p. 3-26 Publication_Information: Publication_Place: Boulder, CO Publisher: SEPM Society for Sedimentary Geology Online_Linkage: https://doi.org/10.1306/74D70646-2B21-11D7-8648000102C1865D Cross_Reference: Citation_Information: Originator: Douglas Lamar Inman Publication_Date: 1952 Title: Measures for describing the size distribution of sediments Series_Information: Series_Name: Journal article Issue_Identification: Journal of Sedimentary Research, v. 22, n. 3, p. 125-145 Publication_Information: Publication_Place: Boulder, CO Publisher: SEPM Society for Sedimentary Geology Online_Linkage: https://doi.org/10.1306/D42694DB-2B26-11D7-8648000102C1865D Cross_Reference: Citation_Information: Originator: Parker D. Trask Publication_Date: 1930 Title: Mechanical analyses of sediments by centrifuge Series_Information: Series_Name: Journal article Issue_Identification: Economic Geology, v. 26, n. 6, p. 581-599 Publication_Information: Publication_Place: Littleton, CO Publisher: Society of Economic Geologists (SEG) Online_Linkage: https://doi.org/10.2113/gsecongeo.25.6.581 Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: Data values are within the expected values. Logical_Consistency_Report: Data values are within the expected values. Completeness_Report: Dataset Six subsamples were collected from the top 5 centimeters (cm) of each push core, a few push cores included the top 8 cm. The top two subsamples were each 0.5 cm thick, and all following subsamples were each 1 cm thick. Subsamples were placed into pre-weighed Whirl-pak bags. Lineage: Process_Step: Process_Description: Wet samples weights were measured, then samples were placed in a 60 degrees C oven until fully dried. Once samples were fully dried, they were placed in a desiccator for an hour, then dry weights were measured. Samples were then placed back in the oven for another 4 hours at 60 degrees C, moved to the desiccator for 1 hour, and reweighed. Samples were considered dry when their weights were equal to or less than 0.004g of their previously recorded dry weight. The bulk density reported here was calculated with the formula: bulk density = (water density * sediment density) / (water density + (sediment density - water density) * water content), where water density is 1 g/cm3 and sediment density is 2.65 g/cm3. Measurements were made in the USGS Pacific Coastal and Marine Science Center sediment lab. Process_Date: 20200203 Process_Step: Process_Description: The grain-size distributions of samples were determined in the USGS Pacific Coastal and Marine Science Center sediment lab. Approximately 20 g of sediment was subsampled and 10 mL of 30 percent hydrogen peroxide was added to remove organic material in the sample. The sample was heated at 250 degrees C to remove any remaining hydrogen peroxide and was placed in an ultrasonic bath to liberate the fine fraction. Subsequently, the sample was centrifuged for 1.5 hours to remove soluble salts. Samples were funneled through a 1-mm and a 63-um sieve to separate the gravel (greater than 1 mm), sand (63 um to 1 mm), and mud (less than 63 um). The sand and gravel fractions were dried in an 80-degree C oven and weighed. Five mL of sodium hexametaphosphate was added to the mud fraction and a 20 mL aliquot was taken from a 1 L graduated cylinder to determine the weight of the mud. The particle-size distribution of the mud and sand fractions was analyzed separately using a Beckman Coulter LS 13 320, and the gravel, sand, and mud results were integrated into a single grain-size distribution for each sample. Where used, phi sizes are equal to the negative log base 1 of millimeter size. Process_Date: 20200311 Process_Step: Process_Description: Percent carbon measurements were made in the USGS Pacific Coastal and Marine Science Center sediment lab. To determine percent carbon in sediment samples, approximately 5g of sample sediment was sub-sampled and dried in an 80 degrees C oven overnight. Samples were then pulverized into a fine powder. To obtain percent total carbon (TC), approximately 20mg of the pulverized sample was weighed and wrapped in an aluminum tin. A UIC CM 5200 furnace attached to a CM 5015 coulometer was used to incinerate the samples at 950 degree C which converted the produced CO2 into a value to obtain total carbon as percent dry weight. For percent total inorganic carbon (TIC), approximately 20mg of sample was weighed into and placed in glass sample tubes which were loaded into a UIC CM 5230 acid digester attached to a CM 5015 coulometer. The samples were digested with 2mL perchloric acid and the produced CO2 was measured to obtain a total inorganic carbon value as percent dry weight. To determine percent calcium carbonate of a sample, the percent TIC value was multiplied by 8.333. The percent total organic carbon (TOC) value was determined by subtracting the percent TIC value from the percent TC value. Two analyses were run per system and the results were averaged. Process_Date: 20200619 Spatial_Data_Organization_Information: Indirect_Spatial_Reference: Data were collected in San Pablo Bay and Grizzly Bay , California Direct_Spatial_Reference_Method: Point Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point Point_and_Vector_Object_Count: 607 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 1.0E-5 Longitude_Resolution: 1.0E-5 Geographic_Coordinate_Units: Decimal degrees Geodetic_Model: Horizontal_Datum_Name: World Geodetic System 1984 (WGS84) Ellipsoid_Name: WGS84 Semi-major_Axis: 6378137.0 Denominator_of_Flattening_Ratio: 298.257223563 Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: ERO19_GS-BD-C.csv Entity_Type_Definition: Table containing attribute information associated with the dataset Entity_Type_Definition_Source: Producer defined Attribute: Attribute_Label: FAN ID Attribute_Definition: Unique U.S. Geological Survey field activity number (FAN). "NA" indicates that no value was assigned. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique U.S. Geological Survey field activity number (FAN). Attribute: Attribute_Label: Bag ID Attribute_Definition: Sample bag identifier Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Sequentially numbered unique identifier for sample bags; assigned in the lab. Attribute: Attribute_Label: Sample ID Attribute_Definition: Sample identifier Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique identifier for samples; assigned in the field. Attribute: Attribute_Label: Lab ID Attribute_Definition: Sample identifier for sediment lab in YY-FFFFF-XX format, where YY is the 2-digit year (for example 19=2019), FFFFF is the 5-digit field-activity-number (FAN) ID code, and XX is a sequential number given to the sample in the lab. "NA" indicates that no value was assigned. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique identifier for samples; assigned in the sediment lab. Attribute: Attribute_Label: Date Collected Attribute_Definition: Date in month/day/year format of sample collection. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 06/12/2019 Range_Domain_Maximum: 11/25/2019 Attribute_Units_of_Measure: Date in month/day/year format Attribute: Attribute_Label: Time (PDT) Attribute_Definition: Time of sample collection, in hours:minutes:seconds format, Pacific Daylight Time (PDT), Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 00:00:00 Range_Domain_Maximum: 23:59:59 Attribute_Units_of_Measure: hours:minutes:seconds format, Pacific Daylight Time (PDT) Attribute: Attribute_Label: Site Attribute_Definition: Code identifying sampling locations. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: GBM Enumerated_Domain_Value_Definition: Grizzly Bay mooring Enumerated_Domain_Value_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: PBM Enumerated_Domain_Value_Definition: Grizzly Bay mooring Enumerated_Domain_Value_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: SPB1 Enumerated_Domain_Value_Definition: San Pablo Bay 1 Enumerated_Domain_Value_Definition_Source: Producer defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: GB1 Enumerated_Domain_Value_Definition: Grizzly Bay 1 Enumerated_Domain_Value_Definition_Source: Producer defined Attribute: Attribute_Label: Latitude Attribute_Definition: Latitude of sample location in decimal degrees, north. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 38.08336 Range_Domain_Maximum: 38.11671 Attribute_Units_of_Measure: Decimal degrees Attribute: Attribute_Label: Longitude Attribute_Definition: Longitude of sample location in decimal degrees, east. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -122.39110 Range_Domain_Maximum: -122.04072 Attribute_Units_of_Measure: Decimal degrees Attribute: Attribute_Label: Core Depth Attribute_Definition: The midpoint of the depth into the sediment bed of the sample . Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.25 Range_Domain_Maximum: 7.5 Attribute_Units_of_Measure: centimeters Attribute: Attribute_Label: Processing Notes Attribute_Definition: Relevant information regarding the sample during its processing Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Unrepresentable_Domain: Unique note of relevant information regarding sample Attribute: Attribute_Label: Wt. percent in -4.00 phi bin or 16 mm bin Attribute_Definition: Weight percent of sample with grain diameter greater than -4.00 phi, or 16 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -3.75 phi bin or 13.5 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -4.00 and -3.75 phi, or 13.5 and 16 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -3.50 phi bin or 11.2 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -3.75 and -3.50 phi, or 11.2 and 13.5 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -3.25 phi bin or 9.51 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -3.50 and -3.25 phi, or 9.51 and 11.2 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -3.00 phi bin or 8 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -3.25 and -3.00 phi, or 8 and 9.51 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -2.75 phi bin or 6.73 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -3.00 and -2.75 phi, or 6.73 and 8 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -2.50 phi bin or 5.66 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -2.75 and -2.50 phi, or 5.66 and 6.73 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -2.25 phi bin or 4.76 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -2.50 and -2.25 phi, or 4.76 and 5.66 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -2.00 phi bin or 4 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -2.25 and -2.00 phi, or 4 and 4.76 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -1.75 phi bin or 3.36 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -2.00 and -1.75 phi, or 3.36 and 4 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -1.50 phi bin or 2.83 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -1.75 and -1.50 phi, or 2.83 and 3.36 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -1.25 phi bin or 2.38 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -1.50 and -1.25 phi, or 2.38 and 2.83 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -1.00 phi bin or 2 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -1.25 and -1.00 phi, or 2 and 2.38 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -0.75 phi bin or 1.68 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -1.00 and -0.75 phi, or 1.68 and 2 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -0.50 phi bin or 1.41 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -0.75 and -0.50 phi, or 1.41 and 1.68 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.00089 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in -0.25 phi bin or 1.19 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -0.50 and -0.25 phi, or 1.19 and 1.41 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.025622 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.00 phi bin or 1 mm bin Attribute_Definition: Weight percent of sample with grain diameter between -0.25 and 0.00 phi, or 1 and 1.19 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.097072 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.25 phi bin or 0.8409 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.00 and 0.25 phi, or 0.8409 and 1 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.133713 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.50 phi bin or 0.7071 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.25 and 0.50 phi, or 0.7071 and 0.8409 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.109178 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 0.75 phi bin or 0.5946 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.50 and 0.75 phi, or 0.5946 and 0.7071 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.161366 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.00 phi bin or 0.5 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 0.75 and 1.00 phi, or 0.5 and 0.5946 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.191249 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.25 phi bin or 0.4204 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.00 and 1.25 phi, or 0.4204 and 0.5 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.125507 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.50 phi bin or 0.3536 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.25 and 1.50 phi, or 0.3536 and 0.4204 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.133006 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 1.75 phi bin or 0.2973 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.50 and 1.75 phi, or 0.2973 and 0.3536 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.048757 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.00 phi bin or 0.25 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 1.75 and 2.00 phi, or 0.25 and 0.2973 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.146529 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.25 phi bin or 0.2102 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.00 and 2.25 phi, or 0.2102 and 0.25 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.420049 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.50 phi bin or 0.1768 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.25 and 2.50 phi, or 0.1768 and 0.2102 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.649953 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 2.75 phi bin or 0.1487 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.50 and 2.75 phi, or 0.1487 and 0.1768 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.809941 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.00 phi bin or 0.125 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 2.75 and 3.00 phi, or 0.125 and 0.1487 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.78968 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.25 phi bin or 0.1051 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.00 and 3.25 phi, or 0.1051 and 0.125 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 1.320742 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.50 phi bin or 0.08839 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.25 and 3.50 phi, or 0.08839 and 0.1051 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00068 Range_Domain_Maximum: 2.328851 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 3.75 phi bin or 0.07433 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.50 and 3.75 phi, or 0.07433 and 0.08839 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.041999 Range_Domain_Maximum: 3.506402 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.00 phi bin or 0.0625 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 3.75 and 4.00 phi, or 0.0625 and 0.07433 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.199992 Range_Domain_Maximum: 4.403353 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.25 phi bin or 0.052556 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.00 and 4.25 phi, or 0.052556 and 0.0625 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.239991 Range_Domain_Maximum: 4.900079 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.50 phi bin or 0.044194 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.25 and 4.50 phi, or 0.044194 and 0.052556 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.499981 Range_Domain_Maximum: 6.790753 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 4.75 phi bin or 0.037163 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.50 and 4.75 phi, or 0.037163 and 0.044194 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.149955 Range_Domain_Maximum: 9.211021 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.00 phi bin or 0.03125 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 4.75 and 5.00 phi, or 0.03125 and 0.037163 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.009922 Range_Domain_Maximum: 9.531057 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.25 phi bin or 0.02628 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.00 and 5.25 phi, or 0.02628 and 0.03125 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.490219 Range_Domain_Maximum: 7.920878 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.50 phi bin or 0.0221 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.25 and 5.50 phi, or 0.0221 and 0.02628 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.62023 Range_Domain_Maximum: 6.020055 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 5.75 phi bin or 0.01858 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.50 and 5.75 phi, or 0.01858 and 0.0221 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.750242 Range_Domain_Maximum: 5.650259 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.00 phi bin or 0.01563 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 5.75 and 6.00 phi, or 0.01563 and 0.01858 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.130275 Range_Domain_Maximum: 5.569871 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.25 phi bin or 0.01314 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.00 and 6.25 phi, or 0.01314 and 0.01563 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.375021 Range_Domain_Maximum: 5.63987 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.50 phi bin or 0.01105 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.25 and 6.50 phi, or 0.01105 and 0.01314 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.410378 Range_Domain_Maximum: 5.95976 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 6.75 phi bin or 0.00929 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.50 and 6.75 phi, or 0.00929 and 0.01105 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.350371 Range_Domain_Maximum: 6.129762 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.00 phi bin or 0.00781 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 6.75 and 7.00 phi, or 0.00781 and 0.00929 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.260361 Range_Domain_Maximum: 6.039766 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.25 phi bin or 0.00657 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.00 and 7.25 phi, or 0.00657 and 0.00781 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.140348 Range_Domain_Maximum: 5.799775 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.50 phi bin or 0.00552 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.25 and 7.50 phi, or 0.00552 and 0.00657 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.040337 Range_Domain_Maximum: 5.650497 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 7.75 phi bin or 0.00465 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.50 and 7.75 phi, or 0.00465 and 0.00552 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.830314 Range_Domain_Maximum: 5.500484 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.00 phi bin or 0.00391 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 7.75 and 8.00 phi, or 0.00391 and 0.00465 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.680297 Range_Domain_Maximum: 5.390474 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.25 phi bin or 0.00329 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.00 and 8.25 phi, or 0.00329 and 0.00391 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.510278 Range_Domain_Maximum: 5.150453 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.50 phi bin or 0.00276 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.25 and 8.50 phi, or 0.00276 and 0.00329 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.280253 Range_Domain_Maximum: 4.710414 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 8.75 phi bin or 0.00232 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.50 and 8.75 phi, or 0.00232 and 0.00276 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.130236 Range_Domain_Maximum: 4.370384 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.00 phi bin or 0.00195 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 8.75 and 9.00 phi, or 0.00195 and 0.00232 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.000222 Range_Domain_Maximum: 4.050356 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.25 phi bin or 0.00164 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.00 and 9.25 phi, or 0.00164 and 0.00195 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.89021 Range_Domain_Maximum: 3.740329 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.50 phi bin or 0.00138 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.25 and 9.50 phi, or 0.00138 and 0.00164 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.810201 Range_Domain_Maximum: 3.490307 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.75 phi bin or 0.00116 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.50 and 9.75 phi, or 0.00116 and 0.00138 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.740191 Range_Domain_Maximum: 3.310291 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 9.99 phi bin or 0.00098 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.75 and 9.99 phi, or 0.00098 and 0.00116 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.590176 Range_Domain_Maximum: 2.990263 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.25 phi bin or 0.00082 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 9.99 and 10.25 phi, or 0.00082 and 0.00098 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.53017 Range_Domain_Maximum: 2.881772 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.50 phi bin or 0.00069 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.25 and 10.50 phi, or 0.00069 and 0.00082 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.270141 Range_Domain_Maximum: 2.465846 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.75 phi bin or 0.00058 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.50 and 10.75 phi, or 0.00058 and 0.00069 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.030114 Range_Domain_Maximum: 2.030114 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 10.99 phi bin or 0.00049 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.75 and 10.99 phi, or 0.00049 and 0.00058 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.710079 Range_Domain_Maximum: 1.426031 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 11.25 phi bin or 0.0004 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 10.99 and 11.25 phi, or 0.0004 and 0.00049 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.400044 Range_Domain_Maximum: 0.812046 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 11.48 phi bin or 0.00035 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 11.25 and 11.48 phi, or 0.00035 and 0.0004 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.09401 Range_Domain_Maximum: 0.189999 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 12.02 phi bin or 0.000241 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 11.50 and 12.02 phi, or 0.000241 and 0.00035 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0 Range_Domain_Maximum: 0.0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Wt. percent in 13.02 phi bin or 0.00012 mm bin Attribute_Definition: Weight percent of sample with grain diameter between 12.02 and 13.02 phi, or 0.00012 and 0.000241 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0 Range_Domain_Maximum: 0.0 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Gravel Attribute_Definition: Percent of sample greater than 2 mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0 Range_Domain_Maximum: 0.0 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Percent Sand Attribute_Definition: Percent of sample less than 2 mm and greater than 63 microns, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.38150 Range_Domain_Maximum: 13.18545 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Percent Silt Attribute_Definition: Percent of sample less than 63 microns and greater than 4 microns, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 57.45505 Range_Domain_Maximum: 76.01843 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Percent Clay Attribute_Definition: Percent of sample less than 4 microns, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 20.98633 Range_Domain_Maximum: 41.25363 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Percent Mud Attribute_Definition: Percent of sample less than 63 microns, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 86.81455 Range_Domain_Maximum: 99.61850 Attribute_Units_of_Measure: Percentage Attribute: Attribute_Label: Gravel to Sand Ratio Attribute_Definition: ratio of percent gravel in sample to percent sand. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0 Range_Domain_Maximum: 0.0 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Sand to Silt Ratio Attribute_Definition: ratio of percent sand in sample to percent silt. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00600 Range_Domain_Maximum: 0.21600 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Silt to Clay Ratio Attribute_Definition: ratio of percent silt in sample to percent clay. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.39300 Range_Domain_Maximum: 3.62200 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Sand to Clay Ratio Attribute_Definition: ratio of percent sand in sample to percent clay. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.01200 Range_Domain_Maximum: 0.51400 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Sand to Mud Ratio Attribute_Definition: ratio of percent sand in sample to percent mud. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00400 Range_Domain_Maximum: 0.15200 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: Gravel to Mud Ratio Attribute_Definition: ratio of percent gravel in sample to percent mud. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0 Range_Domain_Maximum: 0.0 Attribute_Units_of_Measure: no unit Attribute: Attribute_Label: D5 Phi Attribute_Definition: Phi size at D5 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.47900 Range_Domain_Maximum: 5.01500 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D10 Phi Attribute_Definition: Phi size at D10 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.82600 Range_Domain_Maximum: 5.43800 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D16 Phi Attribute_Definition: Phi size at D16 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4.15000 Range_Domain_Maximum: 5.87000 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D25 Phi Attribute_Definition: Phi size at D25 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4.59300 Range_Domain_Maximum: 6.44100 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D50 Phi Attribute_Definition: Phi size at D50 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 5.74200 Range_Domain_Maximum: 7.60000 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D75 Phi Attribute_Definition: Phi size at D75 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 7.63200 Range_Domain_Maximum: 8.87700 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D84 Phi Attribute_Definition: Phi size at D84 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 8.52400 Range_Domain_Maximum: 9.48800 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D90 Phi Attribute_Definition: Phi size at D90 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 9.27600 Range_Domain_Maximum: 9.97900 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D95 Phi Attribute_Definition: Phi size at D95 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 10.00100 Range_Domain_Maximum: 10.44600 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: D5 mm Attribute_Definition: mm size at D5 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00070 Range_Domain_Maximum: 0.00100 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D10 mm Attribute_Definition: mm size at D10 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00100 Range_Domain_Maximum: 0.00160 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D16 mm Attribute_Definition: mm size at D16 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00140 Range_Domain_Maximum: 0.00270 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D25 mm Attribute_Definition: mm size at D25 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00210 Range_Domain_Maximum: 0.00500 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D50 mm Attribute_Definition: mm size at D50 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.00520 Range_Domain_Maximum: 0.01870 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D75 mm Attribute_Definition: mm size at D75 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.01150 Range_Domain_Maximum: 0.04140 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D84 mm Attribute_Definition: mm size at D84 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.01710 Range_Domain_Maximum: 0.05630 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D90 mm Attribute_Definition: mm size at D90 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.02310 Range_Domain_Maximum: 0.07050 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: D95 mm Attribute_Definition: mm size at D95 for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: Producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.03090 Range_Domain_Maximum: 0.08970 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: F-W Median Attribute_Definition: Phi size median for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 5.74183 Range_Domain_Maximum: 7.599702 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Mean Attribute_Definition: Phi size mean for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.282356 Range_Domain_Maximum: 7.650653 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Sorting Attribute_Definition: sorting for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.689219 Range_Domain_Maximum: 2.201538 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Skewness Attribute_Definition: skewness for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.010524 Range_Domain_Maximum: 0.436839 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: F-W Kurtosis Attribute_Definition: Kurtosis for sample by Folk and Ward (1957) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.793878 Range_Domain_Maximum: 0.943448 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Median Attribute_Definition: Phi size median for sample by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 5.74183 Range_Domain_Maximum: 7.599702 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Mean Attribute_Definition: Phi size mean for sample by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.489514 Range_Domain_Maximum: 7.676129 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Sorting Attribute_Definition: sorting for sample by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.758329 Range_Domain_Maximum: 2.372108 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Skew 16-84 Attribute_Definition: skewness for sample (D16-D84) by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.016144 Range_Domain_Maximum: 0.411275 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Skew 05-95 Attribute_Definition: skewness for sample (D5-D95) by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.006928 Range_Domain_Maximum: 0.683074 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Inman Kurtosis Attribute_Definition: Kurtosis for sample by Inman (1952) method, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.396682 Range_Domain_Maximum: 0.600657 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Trask Median Attribute_Definition: mm size median for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.005155 Range_Domain_Maximum: 0.018687 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Trask Mean Attribute_Definition: mm size mean for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.006819 Range_Domain_Maximum: 0.022595 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Trask Sorting Attribute_Definition: sorting for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.29888 Range_Domain_Maximum: 3.317257 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Trask Skewness Attribute_Definition: skewness for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.511808 Range_Domain_Maximum: 1.00911 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Trask Kurtosis Attribute_Definition: kurtosis for sample by Trask (1930) method in mm, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.196735 Range_Domain_Maximum: 0.332382 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Mean Phi Attribute_Definition: phi size mean for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.314059 Range_Domain_Maximum: 7.619815 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Mean mm Attribute_Definition: mm size mean for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.005084 Range_Domain_Maximum: 0.012568 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Variance Phi Attribute_Definition: variance for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.715325 Range_Domain_Maximum: 4.64159 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Std. Dev. Phi Attribute_Definition: standard deviation for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.647824 Range_Domain_Maximum: 2.154435 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Skewness Phi Attribute_Definition: skewness for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.15883 Range_Domain_Maximum: 0.71669 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Kurtosis Phi Attribute_Definition: kurtosis for sample, "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.044506 Range_Domain_Maximum: 2.693647 Attribute_Units_of_Measure: Phi size Attribute: Attribute_Label: Bag Weight Attribute_Definition: The weight of the empty sample bag. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.193 Range_Domain_Maximum: 4.427 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Bag and Wet Sediment Weight Attribute_Definition: The weight of the initial wet sample, as it was collected in the sample bag. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 8.1851 Range_Domain_Maximum: 22.457 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Bag and Dry Sediment Weight Attribute_Definition: The weight of the dry sample including the weight of its sample bag. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4.783 Range_Domain_Maximum: 12.614 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Dry Sediment Weight Attribute_Definition: The weight of the dried sediment in the sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.541 Range_Domain_Maximum: 9.349 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Water Weight Attribute_Definition: The weight of the water from the sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.013 Range_Domain_Maximum: 10.69 Attribute_Units_of_Measure: grams Attribute: Attribute_Label: Bulk Density Attribute_Definition: The bulk density of the sample, calculated as the mass of the dry sediment divided by the volume of the initial sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.209983 Range_Domain_Maximum: 1.513086 Attribute_Units_of_Measure: grams per cubic centimeter Attribute: Attribute_Label: Percent Total Carbon Attribute_Definition: Total weight percentage of organic carbon for sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.751 Range_Domain_Maximum: 8.33 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Total Organic Carbon Attribute_Definition: Total weight percentage of total carbon for sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.72836 Range_Domain_Maximum: 3.093 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Total Inorganic Carbon Attribute_Definition: Total weight percentage of inorganic carbon for sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0 Range_Domain_Maximum: 5.238 Attribute_Units_of_Measure: percentage Attribute: Attribute_Label: Percent Calcium Carbonate Attribute_Definition: Total weight percentage of calcium carbonate (CaCO3) for sample. "NA" indicates that no value was calculated. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0 Range_Domain_Maximum: 43.645 Attribute_Units_of_Measure: grams per cubic centimeter Distribution_Information: Distributor: Contact_Information: Contact_Person_Primary: Contact_Person: U.S. Geological Survey - ScienceBase Contact_Organization: U.S. Geological Survey Contact_Address: Address_Type: mailing and physical Address: Denver Federal Center, Building 810, Mail Stop 302 City: Denver State_or_Province: CO Postal_Code: 80225 Country: United States Contact_Voice_Telephone: 1-888-275-8747 Contact_Electronic_Mail_Address: sciencebase@usgs.gov Resource_Description: These data are available in csv format (ERO19_GS-BD-C.csv) along with CSDGM FGDC-compliant metadata. Distribution_Liability: Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: comma-delimited text Format_Version_Number: Microsoft Excel 2002 (12527.20988) 64-bit Format_Information_Content: zip file contains the csv table, associated metadata, and an image map of the study area showing sample locations, grain size summaries, and elevation model File_Decompression_Technique: No compression applied Transfer_Size: 0.48968 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/5f405a0e82ce8df5b6cb4b28 Network_Resource_Name: https://www.sciencebase.gov/catalog/item/5f405a0e82ce8df5b6cb4b28 Network_Resource_Name: https://doi.org/10.5066/P9P7I65U Access_Instructions: Data can be downloaded using the Network_Resource_Name links. The first link is a direct link to download the zipped file of data, metadata, and a map showing sample locations. The second link points to the landing page for the data, metadata, and browse image. The third link points to the landing page for the entire data release, including links to pages of the various data files. Fees: None. Technical_Prerequisites: The data is available in comma-separated values (CSV) spreadsheet format. Text editing software can be used to open the file, as well as spreadsheet programs, such as Microsoft Excel. Metadata_Reference_Information: Metadata_Date: 20201231 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: PCMSC Science Data Coordinator Contact_Organization: U.S. Geological Survey, Pacific Coastal and Marine Science Center Contact_Address: Address_Type: mailing and physical Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Country: United States Contact_Voice_Telephone: 831-427-7520 Contact_Electronic_Mail_Address: pcmsc_data@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998