Contours--Drakes Bay and Vicinity, California

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:


What does this data set describe?

Title: Contours--Drakes Bay and Vicinity, California
Abstract:
This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Drakes Bay and Vicinity map area, California. The vector data file is included in "Contours_DrakesBay.zip," which is accessible from https://pubs.usgs.gov/ds/781/DrakesBay/data_catalog_DrakesBay.html. These data accompany the pamphlet and map sheets of Watt, J.T., Dartnell, P., Golden, N.E., Greene, H.G., Erdey, M.D., Cochrane, G.R., Johnson, S.Y., Hartwell, S.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Sliter, R.W., Krigsman, L.M., Lowe, E.N., and Chin, J.L. (J.T. Watt and S.A. Cochran, eds.), 2015, California State Waters Map Series—Drakes Bay and Vicinity, California: U.S. Geological Survey Open-File Report 2015–1041, pamphlet 36 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151041.
10-m interval contours of the Drakes Bay and Vicinity map area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB) and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from a bathymetric surface model. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes.
Supplemental_Information:
Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
Although this Federal Geographic Data Committee-compliant metadata file is intended to document the data set in nonproprietary form, as well as in Esri format, this metadata file may include some Esri-specific terminology.
  1. How might this data set be cited?
    Dartnell, Peter, and Kvitek, Rikk G., 2014, Contours--Drakes Bay and Vicinity, California: Data Series DS 781, U.S. Geological Survey, Reston, VA.

    Online Links:

    This is part of the following larger work.

    Golden, Nadine E., 2013, California State Waters Map Series Data Catalog: Data Series DS 781, U.S. Geological Survey, Reston, VA.

    Online Links:

  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: -122.97
    East_Bounding_Coordinate: -122.76
    North_Bounding_Coordinate: 38.04
    South_Bounding_Coordinate: 37.88
  3. What does it look like?
    http://pubs.usgs.gov/ds/781/DrakesBay/images/Contours_DrakesBay.jpg (JPEG)
    Bathymetric contours of Drakes Bay and Vicinity.
  4. Does the data set describe conditions during a particular time period?
    Beginning_Date: 2007
    Ending_Date: 2010
    Currentness_Reference:
    ground condition
  5. What is the general form of this data set?
    Geospatial_Data_Presentation_Form: vector digital data
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      This is a Vector data set. It contains the following vector data types (SDTS terminology):
      • String (14)
    2. What coordinate system is used to represent geographic features?
      The map projection used is WGS 1984 UTM Zone 10N.
      Projection parameters:
      Scale_Factor_at_Central_Meridian: 0.9996
      Longitude_of_Central_Meridian: -123.0
      Latitude_of_Projection_Origin: 0.0
      False_Easting: 500000.0
      False_Northing: 0.0
      Planar coordinates are encoded using coordinate pair
      Abscissae (x-coordinates) are specified to the nearest 0.0001
      Ordinates (y-coordinates) are specified to the nearest 0.0001
      Planar coordinates are specified in Meter
      The horizontal datum used is D WGS 1984.
      The ellipsoid used is WGS 1984.
      The semi-major axis of the ellipsoid used is 6378137.0.
      The flattening of the ellipsoid used is 1/298.257223563.
  7. How does the data set describe geographic features?
    Contours_DrakesBay.shp
    The shapefile includes bathymetric contours for Drakes Bay and vicinity, California. The shapefile can be added to any ESRI ArcMap project. (Source: Esri)
    FID
    Internal feature number. (Source: Esri) Sequential unique whole numbers that are automatically generated.
    SHAPE
    Feature geometry (Source: Esri) Polyline
    ID
    Unique identifier for each contour line. Value of 0 means the line segment has been generated during the smoothing process. (Source: Esri) Polyline
    CONTOUR
    Contours are lines that connect points of equal depth based on the bathymetry grid. The contour values indicate the depth value the line represents. This makes it easier to identifier features on the seafloor. Contour lines were generated at 10-m intervals, from -10 m to -60 m, then the contours were clipped to the boundary of the map area. Values are negative to indicate depth below sea level. The value of 0 represents a line segment created during the smoothing process. (Source: USGS)
    Range of values
    Minimum:-60
    Maximum:-10
    Units:Integer values -10 to -60 representing depth intervals as described above.

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
    • Peter Dartnell
    • Rikk G. Kvitek
  2. Who also contributed to the data set?
  3. To whom should users address questions about the data?
    U.S. Geological Survey, Pacific Coastal and Marine Science Center
    Attn: PCMSC Science Data Coordinator
    2885 Mission Street
    Santa Cruz, CA
    US

    831-427-4747 (voice)
    pcmsc_data@usgs.gov

Why was the data set created?

These data are intended for science researchers, students, policy makers, and the general public. These data can be used with geographic information systems or other software to identify bathymetric features.

How was the data set created?

  1. From what previous works were the data drawn?
  2. How were the data generated, processed, and modified?
    Date: 2010 (process 1 of 8)
    During the Fugro Pelagos and CSUMB mapping missions, an Applanix Position and Motion Compensation System for Marine Vessels (POS/MV, 320, v4) was used to accurately position the vessels during data collection, and it also accounted for vessels motion such as heave, pitch, and roll (position accuracy, ±2 m; pitch, roll, and heading accuracy, ±0.02 degrees; heave accuracy, ±5%, or 5 cm). KGPS altitude data (Fugro Pelagos, StarFix HP & XP units; CSUMB, NavCom 2050) were used to account for tide cycle fluctuations and sound velocity profiles were collected with an Applied Microsystems SVPlus sound velocimeter. Soundings were corrected for vessel motion using the Applanix POS/MV data, for variations in water-column sound velocity using the AM SVPlus data, and for variations in water height (tides) using vertical-position data from the KGPS receivers. Person who carried out this activity:
    Carrie Bretz
    Seafloor Mapping Lab, California State University Monterey Bay
    Projects Manager, GIS & Metadata Supervisor
    100 Campus Center, Bldg 13
    Seaside, CA
    USA

    831.582.4197 (voice)
    carrie_bretz@csumb.edu
    Date: 2012 (process 2 of 8)
    California Seafloor Mapping Project 2-m-resolution bathymetry data within this map were downloaded from http://seafloor.csumb.edu/SFMLwebDATA.htm. Grids were merged together and clipped to the boundary of the map area. Bathymetric contours at 10-m intervals were generated from the bathymetric surface. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m.
    Date: 05-Oct-2017 (process 3 of 8)
    Added Distribution_Information section to metadata to facilitate data download. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Alan O. Allwardt
    Contractor -- Information Specialist
    2885 Mission Street
    Santa Cruz, CA

    831-460-7551 (voice)
    831-427-4748 (FAX)
    aallwardt@usgs.gov
    Date: 05-Oct-2017 (process 4 of 8)
    Keywords section of metadata optimized for discovery in USGS Coastal and Marine Geology Data Catalog. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Alan O. Allwardt
    Contractor -- Information Specialist
    2885 Mission Street
    Santa Cruz, CA

    831-460-7551 (voice)
    831-427-4748 (FAX)
    aallwardt@usgs.gov
    Date: 26-Apr-2018 (process 5 of 8)
    Added keywords from Coastal and Marine Ecological Classification Standard (CMECS) to metadata. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Alan O. Allwardt
    Contractor -- Information Specialist
    2885 Mission Street
    Santa Cruz, CA

    831-460-7551 (voice)
    831-427-4748 (FAX)
    aallwardt@usgs.gov
    Date: 10-May-2018 (process 6 of 8)
    Metadata was modified to bring up to current USGS PCMSC standards. USGS Thesaurus and keywords were added, and Process Steps were refined. Minor typos were corrected. No data information was changed. Person who carried out this activity:
    Susan A Cochran
    U.S. Geological Survey, Pacific Coastal and Marine Science Center
    Geologist
    2885 Mission Street
    Santa Cruz, CA
    USA

    (831) 460-7545 (voice)
    scochran@usgs.gov
    Date: 07-Sep-2018 (process 7 of 8)
    Information for accompanying Open-File Report added to Abstract and Cross Reference sections. Point of Contact information was updated. Details about different Network Resource Name links was given in the Access Instructions section. Phone number for Metadata Contact was corrected. No data information was changed. Person who carried out this activity:
    Susan A Cochran
    U.S. Geological Survey, Pacific Coastal and Marine Science Center
    2885 Mission St.
    Santa Cruz, CA
    United States

    831-460-7545 (voice)
    scochran@usgs.gov
    Date: 19-Oct-2020 (process 8 of 8)
    Edited metadata to add keywords section with USGS persistent identifier as theme keyword. No data were changed. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
  3. What similar or related data should the user be aware of?
    Watt, Janet T., Dartnell, Peter, Golden, Nadine E., Greene, H. Gary, Erdey, Mercedes E., Cochrane, Guy R., Johnson, Samuel Y., Hartwell, Stephen R., Kvitek, Rikk G., Manson, Michael W., Endris, Charles A., Dieter, Bryan E., Sliter, Ray W., Krigsman, Lisa M., Lowe, Erik N., and Chin, John L., 2018, California State Waters Map Series--Drakes Bay and Vicinity, California: Open-File Report 2015-1041, U.S. Geological Survey, Reston, VA.

    Online Links:


How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
    Not applicable
  2. How accurate are the geographic locations?
    Estimated to be no less than 2 m, owing to water depth and total propagated uncertainties of the mapping systems, which include sonar system, position and motion compensation system, and navigation, as well as data processing that includes sounding cleaning, gridding, and datum transformations.
  3. How accurate are the heights or depths?
    Estimated to be no less than 20 cm, owing to water depth and total propagated uncertainties of the mapping systems, which include sonar system, position and motion compensation system, and navigation, as well as data processing that includes sounding cleaning, gridding, and datum transformations.
  4. Where are the gaps in the data? What is missing?
    Complete
  5. How consistent are the relationships among the observations, including topology?
    Unspecified

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints: none
Use_Constraints:
USGS-authored or produced data and information are in the public domain from the U.S. Government and are freely redistributable with proper metadata and source attribution. Please recognize and acknowledge the U.S. Geological Survey as the originator(s) of the dataset and in products derived from these data. This information is not intended for navigation purposes.
  1. Who distributes the data set? (Distributor 1 of 1)
    U.S. Geological Survey
    345 Middlefield Rd
    Menlo Park, CA
    USA

    (650) 329-4309 (voice)
  2. What's the catalog number I need to order this data set? The .zip file (Contours_DrakesBay.zip) includes the .aux, .dbf, .shp, .shx, .sbx, and .sbn files, as well as FGDC-compliant metadata for the bathymetric contour data layer of Drakes Bay and vicinity, California.
  3. What legal disclaimers am I supposed to read?
    Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty.
  4. How can I download or order the data?
  5. What hardware or software do I need in order to use the data set?
    The downloadable data file has been compressed with the "zip" command and can be unzipped with Winzip (or other tool) on Windows systems. To utilize these data, the user must have software capable of uncompressing the WinZip file and importing and viewing an Esri ArcMap TIFF. Users should download the ArcGIS Project File, DrakesBayGIS.mxd.zip, a compressed (with the "zip" command) version of the ArcMap document (.mxd) that has all the data layers loaded in the table of contents for “Drakes Bay and Vicinity“ and has all the data symbolized as on the map sheets. Download and save this ArcGIS project file, including all data layers, to the directory the user has created for this GIS.

Who wrote the metadata?

Dates:
Last modified: 19-Oct-2020
Metadata author:
U.S. Geological Survey, Pacific Coastal and Marine Science Center
Attn: PCMSC Science Data Coordinator
2885 Mission Street
Santa Cruz, CA
US

831-427-4747 (voice)
pcmsc_data@usgs.gov
Metadata standard:
Content Standard for Digital Geospatial Metadata (FGDC-STD-001-1998)

This page is <https://cmgds.marine.usgs.gov/catalog/pcmsc/SeriesReports/DS_DDS/DS_781/DrakesBay/Contours_DrakesBay_metadata.faq.html>
Generated by mp version 2.9.50 on Thu Nov 18 14:01:13 2021