Gravel deposits

Alluvial accumulations of small unconsolidated rock fragments, such as pebbles and cobbles, used in construction as fill, ground cover, or aggregate for concrete.
Subtopics:
(none)

24 results listed by similarity [list alphabetically]
Sediment deposition in the Elwha River estuary, Washington, measured on rod surface elevation tables (RSETs) from 2011 to 2014

This portion of the data release presents sediment deposition in the estuary as measured using rod surface elevation tables (RSETs) at fifteen locations throughout the Elwha River estuary, Washington, from August 2011 to June 2014 (no associated USGS Field Activities numbers because data were collected predominantly by biologists from the Lower Elwha Klallam Tribe). The locations of the RSETs were determined with a hand-held global positioning system (GPS). We measured sediment deposition from 2011 to 2013 ...

Info
Sediment grain size from the Elwha River, Washington, 2006 to 2017

The grain size of sediment on the riverbed was measured during 20 surveys on the Elwha River, Washington, between 2006 and 2017. Most data were collected along the same transects where channel topography was measured (see related child item in this data release: https://www.sciencebase.gov/catalog/item/5a989288e4b06990606de04b). Measurements of sediment ranging from medium sand to boulders were made using the CobbleCam digital photographic technique (Warrick and others, 2009), which uses a calibrated ...

Info
River-channel topography on the Elwha River, Washington, 2006 to 2017

This portion of the data release presents topographic data collected at 5 study sites along Elwha River, Washington between 2006 and 2017. Elevations along channel-perpendicular transects were surveyed using a total station and prism rod. Initial geodetic control was established using static global positioning system (GPS) occupations. A total station was subsequently used to expand and maintain the survey control network at each site. All survey data were referenced to the NAD83 datum, using the UTM, zone ...

Info
Grain size data from the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022)

Pebble-count data were collected during summer surveys (2013, 2015, 2016, 2017, 2018, 2019, 2020, and 2021) at ten sites along the Carmel River, California. Grain-size measurements were made at four to six transects per site using a 0.5 by 0.5 m sampling frame, with approximately 100 sediment-particle counts per transect. Each transect was defined by coordinates on the left and right sides of the river, and sediment grain sizes were measured at five equally spaced locations within the bankfull channel on ...

Info
Topographic survey transect data along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022)

Topographic surveys were completed during eight summer surveys (in 2013, 2014, 2015, 2016, 2017, 2019, 2020 and 2021) at 10 sites along the Carmel River, CA: Berwick (BW), Control Reach (CR), Crossroads (CRO), DeDampierre Lower (DDL), DeDampierre Upper (DDU), Dam Reach (DM), Reservoir Reach (RS), San Carlos (SC), Sleepy Hollow (SH), and Schulte Road (SR)). Topographic measurements were made at multiple locations along four to six cross-section transects per site using a total station (at sites CR, RS, DM ...

Info
Topographic survey transect endpoint coordinates along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022)

This dataset contains the easting, northing, and elevation values of the river-right and river-left transect endpoint reference benchmarks (RBM and LBM) from survey transects at 10 survey reaches along the Carmel River, central California. Topographic surveys were completed on these transects during eight summer surveys (in 2013, 2014, 2015, 2016, 2017, 2019, 2020 and 2021). See accompanying file within this data release for elevation measurements. All data were collected in NAD83 UTM10N horizontal ...

Info
High resolution topography for two pools on the Carmel River, central California, 2014 to 2019

High-resolution topographic surveys were conducted at two pools on the Carmel River between 2014 and 2019 using a survey-grade total station. The Dam Reach pool (DMPOOL) is located within the Dam Reach, approximately 450 meters downstream of the former site of the San Clemente Dam. The Sleepy Hollow pool (SHPOOL) is located within the Sleepy Hollow reach, approximately 2.25 kilometers downstream of the former site of the San Clemente Dam. Both pools were surveyed in 2014, 2015, 2016, 2017, and 2019 using a ...

Info
PAC_CLC: Calculated seabed data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_clc.txt)

This data layer (PAC_CLC.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S Pacific continental margin integrated using the software system dbSEABED. This data layer represents the calculated (CLC) output of the dbSEABED mining software. Data in this file extend variables determined through the data extraction (EXT) and data parsing (PRS) processes of dbSEABED, calculated using empirical relations or known functions. The CLC ...

Info
Seabed component and feature data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_cmp.txt)

This data layer (PAC_CMP.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific continental margin integrated using the software system dbSEABED. This data file gives numeric data about selected components (for example, minerals, rock type, microfossils, and benthic biota) and sea floor features (for example, bioturbation, structure, and ripples) at a given site. Values in the attribute fields represent the membership to ...

Info
PAC_EXT - Extracted seabed data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_ext.txt)

This data layer (PAC_EXT.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific continental margin integrated using the software system dbSEABED. This data layer represents the extracted (EXT) output of the dbSEABED mining software and contains data items which were extracted from the data resources files and generally represent lab-based analytical data. The EXT data are usually considered the most rigorous data ...

Info
PAC_FAC: Seabed facies data (combined components) for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_fac.txt)

The facies data layer (PAC_FAC.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific margin, integrated using the software system dbSEABED. The facies data layer (PAC_FAC.txt) represents concatenated information about components (minerals and rock type), genesis (igneous, metamorphic, carbonate, terrigenous), and other appropriate groupings of information about the sea floor. These data are parsed from written ...

Info
PAC_PRS - Parsed seabed data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_prs.txt)

This data layer (PAC_PRS.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific continental margin integrated using the dbSEABED software system. This data layer represents the parsed (PRS) output of the dbSEABED mining software. It contains the numeric results parsed from text-based descriptions held in the data resource files (DRF). Because it relies on descriptions, the PRS data are less precise than the extracted data ...

Info
usSEABED CaLCulated data for the entire U.S. Atlantic Coast (ATL_CLC)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the calculated (CLC) output of the dbSEABED mining software. It contains results from calculating variables using empirical functions working on the results of extraction or parsing. The CLC data is the most derivative and certainly the least accurate; however, many clients appreciate that it extends the ...

Info
usSEABED component and features data for the entire U.S. Atlantic Coast (ATL_CMP)

This component data layer (_CMP.txt) file gives information about selected components (minerals, rock type, microfossils, benthic biota) and seafloor features (bioturbation, structure, ripples) at a given site. Values in the attribute fields represent the membership to that attribute's fuzzy set. For components such as minerals, rocks, micro-biota and plants, and/or epifauna and infauna, corals and other geologic and biologic information, the value depends on sentence structure and other components in ...

Info
usSEABED EXTracted data for the entire U.S. Atlantic Coast (ATL_EXT)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the extracted (EXT) output of the dbSEABED mining software. It contains data items which were simply extracted from the data resources through data mining. The EXT data is usually based on instrumental analyses (probe or laboratory) but may apply to just a subsample of the sediment (eg. no large shells).

Info
usSEABED facies data for the entire U.S. Atlantic Coast (ATL_FAC)

The facies data layer (_FAC.txt) is a point coverage of known sediment samplings, inspections, and probings from the usSEABED data collection and integrated using the software system dbSEABED. The facies data layer (_FAC.txt)represents concatenated information about components (minerals and rock type), genesis (igneous, metamorphic, carbonate, terrigenous), and other appropriate groupings of information about the seafloor. The facies data are parsed from written descriptions from cores, grabs, photographs, ...

Info
usSEABED PaRSed data for the entire U.S. Atlantic Coast (ATL_PRS)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the parsed (PRS) output of the dbSEABED mining software. It contains the results of parsing descriptions in the data resources. The PRS data is less precise because it comes from word-based descriptions, but will include information on outsized elements, consolidation that are not usually in EXT data.

Info
usSEABED CaLCulated data for the entire U.S. Gulf of Mexico and Caribbean (GMX_CLC, Puerto Rico and U.S. Virgin Islands)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the calculated (CLC) output of the dbSEABED mining software. It contains results from calculating variables using empirical functions working on the results of extraction or parsing. The CLC data is the most derivative and certainly the least accurate; however, many clients appreciate that it extends the ...

Info
usSEABED component and features data for the entire U.S. Gulf of Mexico and Caribbean (GMX_CMP, Puerto Rico and U.S. Virgin Islands)

This component data layer (_CMP.txt) file gives information about selected components (minerals, rock type, microfossils, benthic biota) and seafloor features (bioturbation, structure, ripples) at a given site. Values in the attribute fields represent the membership to that attribute's fuzzy set. For components such as minerals, rocks, micro-biota and plants, and/or epifauna and infauna, corals and other geologic and biologic information, the value depends on sentence structure and other components in ...

Info
usSEABED EXTracted data for the entire U.S. Gulf of Mexico and Caribbean (GMX_EXT, Puerto Rico and U.S. Virgin Islands)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the extracted (EXT) output of the dbSEABED mining software. It contains data items which were simply extracted from the data resources through data mining. The EXT data is usually based on instrumental analyses (probe or laboratory) but may apply to just a subsample of the sediment (eg. no large shells).

Info
usSEABED facies data for the entire U.S. Gulf of Mexico and Caribbean (GMX_FAC, Puerto Rico and U.S. Virgin Islands)

The facies data layer (_FAC.txt) is a point coverage of known sediment samplings, inspections, and probings from the usSEABED data collection and integrated using the software system dbSEABED. The facies data layer (_FAC.txt)represents concatenated information about components (minerals and rock type), genesis (igneous, metamorphic, carbonate, terrigenous), and other appropriate groupings of information about the seafloor. The facies data are parsed from written descriptions from cores, grabs, photographs, ...

Info
usSEABED PaRSed data for the entire U.S. Gulf of Mexico and Caribbean (GMX_PRS, Puerto Rico and U.S. Virgin Islands)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the parsed (PRS) output of the dbSEABED mining software. It contains the results of parsing descriptions in the data resources. The PRS data is less precise because it comes from word-based descriptions, but will include information on outsized elements, consolidation that are not usually in EXT data.

Info
Location and analysis of sediment samples collected in 2014 by the U.S. Geological Survey offshore of Fire Island, NY (Esri point shapefile, GCS WGS 84)

The U.S. Geological Survey (USGS) conducted a geophysical and sampling survey in October 2014 that focused on a series of shoreface-attached ridges offshore of western Fire Island, NY. Seismic-reflection data, surficial grab samples and bottom photographs and video were collected along the lower shoreface and inner continental shelf. The purpose of this survey was to assess the impact of Hurricane Sandy on this coastal region. These data were compared to seismic-reflection and surficial sediment data ...

Info
Sediment Texture of the Sea Floor offshore of western and southern Martha's Vineyard and north of Nantucket, Massachusetts

Geologic, sediment texture, and physiographic zone maps characterize the sea floor south and west of Martha's Vineyard and north of Nantucket, Massachusetts. These maps were derived from interpretations of seismic-reflection profiles, high-resolution bathymetry, acoustic-backscatter intensity, bottom photographs, and surficial sediment samples. The interpretation of the seismic stratigraphy and mapping of glacial and Holocene marine units provided a foundation on which the surficial maps were created. This ...

Info