Lidar-Derived First-Surface Digital Elevation Model (DEM) Mosaic for EAARL-B Topography—Big Thicket National Preserve: Little Pine Island Bayou Corridor Unit, Texas, 2014

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:


What does this data set describe?

Title:
Lidar-Derived First-Surface Digital Elevation Model (DEM) Mosaic for EAARL-B Topography—Big Thicket National Preserve: Little Pine Island Bayou Corridor Unit, Texas, 2014
Abstract:
A first-surface topography Digital Elevation Model (DEM) mosaic for the Little Pine Island Bayou Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 15, 21, 22, 26, and 30, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the Earth's surface through an opening in the bottom of the aircraft's fuselage. The laser system records the time difference between emission of the laser beam and the reception of the reflected laser signal in the aircraft. The plane travels over the target area at approximately 55 meters per second at an elevation of approximately 300 meters, resulting in a laser swath of approximately 240 meters with an average point density of 1.4 points per square meter. A peak sampling rate of 15-30 kilohertz results in an extremely dense spatial elevation dataset. More than 100 kilometers of coastline can be surveyed easily within a 3- to 4-hour mission. When resultant elevation maps for an area are analyzed, they provide a useful tool to make management decisions regarding land development.
Supplemental_Information:
Raw lidar data are not in a format that is generally usable by natural-resource managers and research scientists for scientific analysis. Converting dense lidar elevation data into a readily usable format without loss of essential information requires specialized processing. The U.S. Geological Survey's Coastal and Marine Geology Program (CMGP) has developed custom software to convert raw lidar data into a GIS-compatible map product to be provided to GIS specialists, managers, and scientists. The primary tool used in the conversion process is Airborne Lidar Processing System (ALPS), a multitiered processing system developed originally by a USGS-NASA collaborative project. Specialized processing algorithms are used to convert raw waveform lidar data acquired by the EAARL-B to georeferenced spot (x,y,z) returns for "first surface" and "bare earth" topography. The terms first surface and bare earth refer to the digital elevation data of the terrain, although first-surface data include vegetation, buildings, and other manmade structures, bare-earth data do not. The zero crossing of the second derivative (that is, detection of stationary points) is used to detect the first return, resulting in "first surface" topography, whereas the trailing edge algorithm (that is, the algorithm searches for the location before the last return where direction changes along the trailing edge) is used to detect the range to the last return, or "bare earth" (the first and last returns being the first and last significant measurable part of the return pulse). Statistical filtering, known as the Random Consensus Filter (RCF), is used to remove false bottom returns and other outliers from the EAARL-B topography data. The filter uses a grid of non-overlapping square cells (buffer) of user-defined size overlaid onto the original point cloud. The user also defines the vertical tolerance (vertical width) based on the topographic complexity and point-sampling density of the data. The maximum allowable elevation range within a cell is established by this vertical tolerance. An iterative process searches for the maximum concentration of points within the vertical tolerance and removes those points outside of the tolerance (Nayegandhi and others, 2009). These data are then converted to the North American Datum of 1983 and the North American Vertical Datum of 1988 (using the GEOID12A model); please note that these data are not suitable for determining absolute elevation measurements.
  1. How might this data set be cited?
    U.S. Geological Survey, 20160321, Lidar-Derived First-Surface Digital Elevation Model (DEM) Mosaic for EAARL-B Topography—Big Thicket National Preserve: Little Pine Island Bayou Corridor Unit, Texas, 2014: U.S. Geological Survey Data Release doi:10.5066/F7HX19S0, U.S. Geological Survey, St. Petersburg, FL.

    Online Links:

  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: -94.43364757
    East_Bounding_Coordinate: -94.18374351
    North_Bounding_Coordinate: 30.20413865
    South_Bounding_Coordinate: 30.14754318
  3. What does it look like?
  4. Does the data set describe conditions during a particular time period?
    Calendar_Date: 15-Jan-2014
    Currentness_Reference:
    ground condition
  5. What is the general form of this data set?
    Geospatial_Data_Presentation_Form: raster digital data
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      Indirect_Spatial_Reference: Tiling Index
      This is a Raster data set. It contains the following raster data types:
      • Dimensions, type Pixel
    2. What coordinate system is used to represent geographic features?
      Grid_Coordinate_System_Name: Universal Transverse Mercator
      Universal_Transverse_Mercator:
      UTM_Zone_Number: 15
      Transverse_Mercator:
      Scale_Factor_at_Central_Meridian: 0.999600
      Longitude_of_Central_Meridian: -93.000000
      Latitude_of_Projection_Origin: 0
      False_Easting: 500000.000000
      False_Northing: 0
      Planar coordinates are encoded using row and column
      Abscissae (x-coordinates) are specified to the nearest 2.500000
      Ordinates (y-coordinates) are specified to the nearest 2.500000
      Planar coordinates are specified in meters
      The horizontal datum used is North American Datum of 1983.
      The ellipsoid used is Geodetic Reference System 80.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.25722210100002.
      Vertical_Coordinate_System_Definition:
      Altitude_System_Definition:
      Altitude_Datum_Name: North American Vertical Datum of 1988
      Altitude_Resolution: 0.20
      Altitude_Distance_Units: meters
      Altitude_Encoding_Method:
      Explicit elevation coordinate included with horizontal coordinates
  7. How does the data set describe geographic features?
    Entity_and_Attribute_Overview:
    The input parameters for the random consensus filter (RCF) were: grid cell size (buffer) = 500 centimeters x 500 centimeters; vertical tolerance (vertical width) = 1500 centimeters. Each pixel of the encoded GeoTIFF has an explicit elevation value associated with it. The GeoTIFF grid, which is provided at a 2.5-meter horizontal resolution, is encoded with the interpolated elevation value. The GeoTIFFs are created using Delaunay triangulation, followed by linear interpolation based on the routines in the Exelis Visual Information Solutions Interactive Data Language (IDL) code. The GeoTIFFs were mosaicked using ERDAS Imagine 2014 Mosaic Pro.
    Entity_and_Attribute_Detail_Citation: http://pubs.usgs.gov/of/2009/1078/

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
    • U.S. Geological Survey
  2. Who also contributed to the data set?
    Acknowledgment of the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, as a data source would be appreciated in products developed from these data, and such acknowledgment as is standard for citation and legal practices for data source is expected. Sharing of new data layers developed directly from these data would also be appreciated by the U.S. Geological Survey staff. Users should be aware that comparisons with other datasets for the same area from other periods may be inaccurate because of inconsistencies resulting from changes in photointerpretation, mapping conventions, and digital processes over time. These data are not legal documents and are not to be used as such.
  3. To whom should users address questions about the data?
    Xan Fredericks
    Cherokee Nation Technologies, U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL
    Lidar Validation and Processing Analyst
    600 4th Street South
    St. Petersburg, FL
    USA

    727 502-8086 (voice)
    727 502-8182 (FAX)
    afredericks@usgs.gov
    Hours_of_Service: M-F, 8:00-4:00 ET

Why was the data set created?

The purpose of this project was to produce a highly detailed and accurate digital elevation map for the Little Pine Island Bayou Corridor Unit of Big Thicket National Preserve in Texas for use as a management tool and to make these data available to natural-resource managers and research scientists. To ensure that SPCMSC data management protocols were followed, this survey was assigned a USGS field activity number (FAN), 13LTS02. Additional survey and data details are available at http://cmgds.marine.usgs.gov/fan_info.php?fan=13LTS02.

How was the data set created?

  1. From what previous works were the data drawn?
  2. How were the data generated, processed, and modified?
    Date: 09-Feb-2016 (process 1 of 4)
    The data were collected using a Cessna 310 aircraft. The EAARL-B laser scanner collects the data using a green-wavelength (532-nanometer) raster scanning laser, while a digital camera acquires a visual record of the flight. The data are stored on hard drives and archived at the U.S. Geological Survey office in St. Petersburg, Florida. The navigational data are processed and then, along with the raw data, are downloaded into ALPS, or the Airborne Lidar Processing System (20140115-20160209). Data are converted from units of time to x,y,z points for elevation, which are then manually edited and quality checked to ensure anomalies and noise have been addressed to specification. The derived surface data are then converted into raster data (GeoTIFF), which are mosaicked using ERDAS Imagine 2014 (20160209). Person who carried out this activity:
    Xan Fredericks
    Cherokee Nation Technologies, U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL
    Lidar Validation and Processing Analyst
    600 4th Street South
    St. Petersburg, FL
    USA

    727 502-8086 (voice)
    afredericks@usgs.gov
    Hours_of_Service: M-F, 8:00-4:00 ET
    Date: 22-Feb-2016 (process 2 of 4)
    Metadata imported into ArcCatalog 10.2.2.3552 from XML file. Person who carried out this activity:
    Xan Fredericks
    Cherokee Nation Technologies, U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL
    Lidar Validation and Processing Analyst
    600 4th Street South
    St. Petersburg, FL
    USA

    727 502-8086 (voice)
    afredericks@usgs.gov
    Hours_of_Service: M-F, 8:00-4:00 ET
    Date: 04-Jan-2017 (process 3 of 4)
    Keywords section of metadata optimized for discovery in USGS Coastal and Marine Geology Data Catalog. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Alan O. Allwardt
    Contractor -- Information Specialist
    2885 Mission Street
    Santa Cruz, CA

    831-460-7551 (voice)
    831-427-4748 (FAX)
    aallwardt@usgs.gov
    Date: 13-Oct-2020 (process 4 of 4)
    Added keywords section with USGS persistent identifier as theme keyword. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
  3. What similar or related data should the user be aware of?
    Nayegandhi, A., Brock, J.C., and Wright, C.W., 2009, Small footprint, waveform-resolving lidar estimation of submerged and subcanopy topography in coastal environments: International Journal of Remote Sensing v. 30 no. 4, p. 861-878.


How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
    The expected accuracy of the measured variables is as follows: attitude within 0.05 degree and 3 centimeters nominal ranging accuracy. Quality checks are built into the data-processing software.
  2. How accurate are the geographic locations?
    Raw lidar measurements have been determined to be within 1 meter in horizontal accuracy.
  3. How accurate are the heights or depths?
    Vertical elevation accuracies for these data are consistent with the point elevation data that typically have an RMSE of 20 centimeters or better; however, a ground-control survey was not completed simultaneously with this lidar survey. Vertical accuracies may differ based on the type of terrain and the accuracy of the GPS and aircraft-attitude measurements.
  4. Where are the gaps in the data? What is missing?
    Missing areas are represented by a "no data" value of -32,767 and are a result of the survey not covering a particular region or the manual removal of water and lidar processing artifacts.
  5. How consistent are the relationships among the observations, including topology?
    These data are located in UTM Zone 15.

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints: None
Use_Constraints:
Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. The U.S. Geological Survey requests to be acknowledged as originator of these data in future products or derivative research.
  1. Who distributes the data set? (Distributor 1 of 1)
    U.S. Geological Survey
    Attn: Xan Fredericks
    Lidar Validation and Processing Analyst, Cherokee Nation Technologies
    600 4th Street South
    St. Petersburg, FL
    USA

    727 502-8086 (voice)
    Hours_of_Service: M-F, 8:00-4:00 ET
  2. What's the catalog number I need to order this data set? BITH2014_LittlePineIslandBayouCorridorUnit_EAARLB_FS_z15_n88g12A_mosaic.tif
  3. What legal disclaimers am I supposed to read?
    Although these data have been processed successfully on a computer system at the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system, or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. The USGS shall not be held liable for improper or incorrect use of the data described or contained herein. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
  4. How can I download or order the data?
  5. Is there some other way to get the data?
    Contact U.S. Geological Survey for details.

Who wrote the metadata?

Dates:
Last modified: 02-Nov-2020
Metadata author:
Xan Fredericks
Cherokee Nation Technologies, U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL
Lidar Validation and Processing Analyst
600 4th Street South
St. Petersburg, FL
USA

727 502-8086 (voice)
afredericks@usgs.gov
Hours_of_Service: M-F, 8:00-4:00 ET
Metadata standard:
Content Standard for Digital Geospatial Metadata (FGDC-STD-001-1998)

This page is <https://cmgds.marine.usgs.gov/catalog/spcmsc/BITH2014_LittlePineIslandBayouCorridorUnit_EAARLB_FS_z15_n88g12A_mosaic_metadata.faq.html>
Generated by mp version 2.9.50 on Tue Sep 21 18:18:32 2021