Metadata: Identification_Information: Citation: Citation_Information: Originator: Mark Hansen Publication_Date: 2015 Title: Single-Beam Bathymetry Sounding Data of Florida Bay, Florida (1995-1999) in XYZ format Geospatial_Data_Presentation_Form: tabular digital data Series_Information: Series_Name: Archive of Bathymetry Data Collected in South Florida from 1995 to 2015 Issue_Identification: U.S. Geological Survey Data Series-1031 Publication_Information: Publication_Place: St. Petersburg, Florida Publisher: U.S. Geological Survey Online_Linkage: https://pubs.usgs.gov/ds/1031/download/FLBay/soundings/DS1031-FLBay_WGS84_NAVD88-G99_SB_txt.xyz.zip Description: Abstract: Land development and alterations of the ecosystem in South Florida have decreased freshwater and increased nutrient flows into Florida Bay. As a result, there has been a decrease in the water quality of the bay; the decline in water quality has prompted sea grass die-offs and has led to reduced fish populations. Restoration of water quality in Florida Bay will depend partly upon using numerical-circulation and sediment-transport models to establish water-quality targets and to assess progress toward reaching restoration targets. Application of these models is complicated, however, because of complex sea-floor topography (basin-mudbank morphology). The only complete topography data set of the Bay is 100 years old. Consequently, an accurate and modern sea-floor or bathymetry map of the Bay was critical for numerical modeling research. A modern bathymetry data set will also permit a comparison to historical data in order to help access sedimentation rates within the Bay. The U.S. Geological Survey USGS conducted a mapping project from 1995 to 1999 in the Florida Bay to collect new bathymetric data for the entire bay. This study produced a detailed bathymetric data set of Florida Bay in order to help assess sedimentation rates and provide numerical modelers with an accurate bathymetry map. This report serves as an archive of processed single-beam bathymetry data that were collected in Florida Bay, Florida over multiple cruises between 1995 and 1999. Geographic information system data products include a XYZ data, bathymetric contours, and USGS quadrangle maps. Additional files include formal Federal Geographic Data Committee metadata. Purpose: Detailed, high-resolution maps of Florida Bay mudbank elevations are needed to understand sediment dynamics and provide input into water quality and circulation models. The bathymetry of Florida Bay had not been systematically mapped in nearly 100 years, and some shallow areas of the bay have never been mapped. An accurate, modern bathymetric survey provides a baseline for assessing future sedimentation rates in the Bay, and a foundation for developing a sediment budget. Due to the complexity of the Bay and age of existing data, a current bathymetric grid (digitally derived from the survey) is critical for numerical models. Numerical circulation and sediment transport models being developed for the South Florida Ecosystem Restoration Program are being used to address water quality issues in Florida Bay. Application of these models is complicated due to the complex sea-floor topography (basin/mudbank morphology) of the Bay. The only complete topography data set of the Bay is 100 years old. Consequently, an accurate, modern sea-floor bathymetry map of the Bay is critical for numerical modeling research. A modern bathymetry data set will also permit a comparison to historical data in order to help access sedimentation rates within the Bay. Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 1995 Ending_Date: 1999 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -81.1296 East_Bounding_Coordinate: -80.3775 North_Bounding_Coordinate: 25.2437 South_Bounding_Coordinate: 24.7424 Keywords: Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:d85732fb-6bc7-4def-abd0-6754f4e1965d Theme: Theme_Keyword_Thesaurus: General Theme_Keyword: bathymetry Theme_Keyword: circulation model Theme_Keyword: hydrology Theme_Keyword: mapping Theme_Keyword: SANDS Theme_Keyword: sediment dynamics Theme_Keyword: System for Accurate Nearshore Depth Surveying Theme_Keyword: single beam Theme_Keyword: echosounder Theme_Keyword: erosion Theme_Keyword: hydrography Theme_Keyword: U.S. Geological Survey Theme_Keyword: USGS Theme_Keyword: Coastal and Marine Geology Program Theme_Keyword: CMGP Theme_Keyword: St. Petersburg Coastal and Marine Science Center Theme_Keyword: SPCMSC Theme_Keyword: soundings Theme_Keyword: elevation Theme_Keyword: sea floor Theme_Keyword: orthometric Theme_Keyword: water depth Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: environment Theme_Keyword: inlandWaters Theme_Keyword: elevation Theme_Keyword: geoscientificInformation Theme_Keyword: imageryBaseMapsEarthCover Theme_Keyword: oceans Place: Place_Keyword_Thesaurus: Department of Commerce, 1995, Countries, Dependencies, Areas of Special Sovereignty, and Their Principal Administrative Divisions, Federal Information Processing Standard (FIPS) 10-4, Washington, D.C., National Institute of Standards and Technology Place_Keyword: United States Place_Keyword: US Place: Place_Keyword_Thesaurus: U.S. Department of Commerce, 1987, Codes for the identification of the States, the District of Columbia and the outlying areas of the United States, and associated areas (Federal Information Processing Standard 5-2): Washington, D. C., NIST Place_Keyword: Florida Place_Keyword: FL Place: Place_Keyword_Thesaurus: Department of Commerce, 1990, Counties and Equivalent Entities of the United States, Its Possessions, and Associated Areas, FIPS 6-3, Washington, DC, National Institute of Standards and Technology Place_Keyword: Florida Bay Place_Keyword: Florida Keys Place_Keyword: Gulf of Mexico Place_Keyword: Atlantic Ocean Place_Keyword: Blackwater Sound Place_Keyword: Buchanan Keys Place_Keyword: Calusa Keys Place_Keyword: Grassy Key Place_Keyword: Clive Key Place_Keyword: Long Key Place_Keyword: Lower Matecumbe Key Place_Keyword: Pelican Keys Place_Keyword: Plantation Key Place_Keyword: Rock Harbor Place_Keyword: Sandy key Place_Keyword: Tavernier Place_Keyword: Upper Matecumbe Key Place_Keyword: West Lake Place_Keyword: Flamingo Place_Keyword: Florida Bay Place_Keyword: Joe Bay Place_Keyword: Lake Ingraham East Place_Keyword: Everglades National Park Place_Keyword: Lower Everglades Place_Keyword: Florida Keys Place_Keyword: Madeira Key Place_Keyword: Schooner Key Access_Constraints: The U.S. Geological Survey requests that it be referenced as the originator of this dataset in any future products or research derived from these data. Use_Constraints: These data should not be used for navigational purposes. Point_of_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Mark Hansen Contact_Organization: U.S. Geological Survey Contact_Position: Oceanographer Contact_Address: Address_Type: mailing and physical address Address: 600 Fourth Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: mhansen@usgs.gov Data_Set_Credit: South Florida Ecosystem Program is one of several study areas within the U.S. Geological Survey Ecosystem Program. Nancy T. DeWitt performed a significant portion of bathymetric survey data collection and processing. BJ Reynolds and Lance Thornton provided data collection support. Native_Data_Set_Environment: Microsoft Windows 7 Enterprise, Service Pack 1; ESRI ArcGIS 10.2.1 Build 3497 Cross_Reference: Citation_Information: Originator: Hansen, Mark DeWitt, Nancy T. Publication_Date: 2000 Title: 1890 and 1990 Bathymetry of Florida Bay Geospatial_Data_Presentation_Form: report Series_Information: Series_Name: USGS Open-File Report Issue_Identification: OFR 00-347 Publication_Information: Publication_Place: St. Petersburg, FL Publisher: U.S. Geological Survey Online_Linkage: http://sofia.usgs.gov/publications/ofr/00-347/ Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: The accuracy of the data is determined during data collection. This dataset is derived from a multiple research cruises using identical equipment, set-ups, and staff; therefore, it is internally consistent. Methods are employed to maintain data collection consistency aboard the platform. During mobilization, each piece of equipment is isolated to obtain internal and external offset measurements with respect to the survey platform. All the critical measurements are recorded manually and digitally entered into their respective programs. Offsets between the single-beam transducers and the Ashtech antenna reference point (ARP) were measured and accounted for in post-processing. Bar checks were performed as calibration efforts and accounted for any drift in the Marimatech Echosounder. Differential Geographic Positioning System (DGPS) coordinates were obtained using post-processing software packages developed by the National Oceanic and Atmospheric Administration (NOAA)/National Geodetic Survey (NGS) Online Positioning User Service (OPUS), National Aeronautics and Space Administration (NASA)/Jet Propulsion Laboratory (JPL) Online Positioning User Service (GIPSY), and Scripps Orbit and Permanent Array Center Online Positioning User Service (SCOUT). Boat trajectories were computed with PNAV v2.0 software by ASHTECH, Inc. These bathymetric data have not been independently verified for accuracy. Logical_Consistency_Report: This dataset was acquired on multiple research cruises between 1995 and 1999 with identical hardware and software systems. Completeness_Report: These are complete post-processed x,y,z bathymetric data points from acoustic single-beam system collected between 1995 to 1999 in Florida Bay, Florida. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: The GPS antenna and receiver acquisition configuration used at the reference station was duplicated on the survey vessel (rover). The base receiver and the rover receiver record their positions concurrently at 1Hz recording intervals throughout the survey. All processed measurements are referenced to the base station coordinates. GPS base or differential reference stations were operated within approximately 15 to 20 km of the survey area. Ten new temporary ground-control points or benchmarks (surveyed to within 1 cm to 2 cm accuracy) were established throughout the study area for use as reference receiver sites using standard benchmarks procedures. The new benchmarks were surveyed using Ashtech Z-12, 12 channel dual-frequency GPS receivers. Full-phase carrier data were recorded on each occupied benchmark in Ashtech proprietary BIN format with daily occupations ranging from 6 to 12 hours. BIN files were then converted to RINEX-2 format for position processing. All static base station GPS sessions were submitted for processing to the online OPUS, GIPSY, and SCOUT system software. The computed base location results were entered into a spreadsheet to compute one final positional coordinate and error analysis for that base location. The final positional coordinate (latitude, longitude, and ellipsoid height) is the weighted average of all GPS sessions. For each GPS session, the weighted average was calculated from the total session time in seconds; therefore, longer GPS occupation times held more value than shorter occupation times. Results were computed relative to ITRF00 coordinate system. The established geodetic reference frame for the project was WGS84. Therefore, final reference coordinates used to process the rover data were transformed from ITRF00 to WGS84 using National Oceanic and Atmospheric Administration/National Geodetic Survey(NOAA/NGS) HTDP software v2.1. OPUS, GIPSY, and SCOUT results provide an error measurement for each daily solution. Applying these error measurements, the horizontal accuracy of the base station is estimated to be 0.04 (m) root mean squared (RMS). The kinematic (rover) trajectories were processed using PNAV v2.0, by ASHTECH, Inc. A horizontal error measurement, RMS is computed for each epoch. The horizontal trajectory errors for varied between 0 and 0.08(m). The combined horizontal error from base station coordinate solutions and rover trajectories range from 0 and 0.12 (m), with the average approximately 0.06 (m). Quantitative_Horizontal_Positional_Accuracy_Assessment: Horizontal_Positional_Accuracy_Value: 0.04 Horizontal_Positional_Accuracy_Explanation: Static GPS data was processed using OPUS, GIPSY, and SCOUT software and kinematic GPS data was processed with PNAV v2.0 software by ASHTECH, Inc. and SANDS v1.2 Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: The GPS antenna and receiver acquisition configuration used at the reference station was duplicated on the survey vessel (rover). The base receiver and the rover receiver record their positions concurrently at 1Hz recording intervals throughout the survey. All processed measurements are referenced to the base station coordinates. GPS base or differential reference stations were operated within approximately 15 to 20 km of the survey area. Ten new temporary ground-control points or benchmarks (surveyed to within 1 cm to 2 cm accuracy) were established throughout the study area for use as reference receiver sites using standard benchmarks procedures. The new benchmarks were surveyed using Ashtech Z-12, 12 channel dual-frequency GPS receivers. Full-phase carrier data were recorded on each occupied benchmark in Ashtech proprietary BIN format with daily occupations ranging from 6 to 12 hours. BIN files were then converted to RINEX-2 format for position processing. All static base station GPS sessions were submitted for processing to the online OPUS, GIPSY, and SCOUT system software. The computed base location results were entered into a spreadsheet to compute one final positional coordinate and error analysis for that base location. The final positional coordinate (latitude, longitude, and ellipsoid height) is the weighted average of all GPS sessions. For each GPS session, the weighted average was calculated from the total session time in seconds; therefore, longer GPS occupation times held more value than shorter occupation times. Results were computed relative to ITRF00 coordinate system. The established geodetic reference frame for the project was WGS84. Therefore, final reference coordinates used to process the rover data were transformed from ITRF00 to WGS84 using National Oceanic and Atmospheric Administration/National Geodetic Survey(NOAA/NGS) HTDP software v2.1. OPUS, GIPSY, and SCOUT results provide an error measurement for each daily solution. Applying these error measurements, the vertical accuracy of the base station is estimated to be 0.04 (m) root mean squared (RMS). The kinematic (rover) trajectories were processed using PNAV v2.0, by ASHTECH, Inc. A vertical error measurement, RMS is computed for each epoch. The vertical trajectory errors for varied between 0 and 0.08(m). The combined vertical error from base station coordinate solutions and rover trajectories range from 0 and 0.14 (m), with the average approximately 0.08 (m). Quantitative_Vertical_Positional_Accuracy_Assessment: Vertical_Positional_Accuracy_Value: 0.08 Vertical_Positional_Accuracy_Explanation: Static GPS data was processed using OPUS, GIPSY, and SCOUT software and kinematic GPS data was processed with PNAV v2.0 software by ASHTECH, Inc. and SANDS v1.2 Lineage: Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 2000 Title: 1890 and 1990 Bathymetry of Florida Bay Type_of_Source_Media: report Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 1995 Ending_Date: 1999 Source_Currentness_Reference: ground condition Source_Citation_Abbreviation: USGS Florida Bay bathymetry Source_Contribution: Original processed bathymetric data. Process_Step: Process_Description: Data Acquisition - The sea-floor of Florida Bay was mapped by using an outboard motor boat, equipped with a high-precision Global Positioning Systems (GPS) coupled with a high-precision depth sounder. To accomplish this task, the SANDS (System for Accurate Nearshore Depth Surveying) system was developed by Mark Hansen (SPCMSC) and Jeff List (WHSC) of the U.S. Geological Survey. SANDS consists of two components, hardware and processing software. Data was collected on a USGS 7.5-minute quadrangle-by-quadrangle basis, proceeding westward from Blackwater Sound. The track-line spacing varied depending upon the relief of the sea floor; that is, closer spacing adjacent to mud-banks and wider spacing in the basins. Track-lines were surveyed in a north-south orientation, and crossings (intersecting track-lines) were surveyed in an east-west orientation. Crossing lines are critical because they serve as a check on the internal accuracy of the data.] Reference GPS reference stations were operated on an USGS benchmark benchmark, typically located within approximately 15 km of the farthest single-beam track line. Reference and rover GPS receivers recorded the 12-channel full-carrier-phase positioning signals (L1/L2) from satellites via ASHTECH choke-ring antennas. The reference and rover receivers record their positions concurrently at 1-second(s) recording intervals throughout the survey. Boat motion was recorded at 50-millisecond (ms) intervals using a TSS Dynamic Motion Sensor 05 (TSS DMS-05). Bathymetric soundings were recorded at 10-ms intervals using a Marimatech EC-100 survey grade echo-sounder. The single-beam data were acquired using the hydrographic software HYPACK version 5. All data strings from the instruments were streamed in real time and recorded through HYPACK software. Process_Date: 1999 Source_Produced_Citation_Abbreviation: Raw sensor data files in ASCII text format and GPS Carrier-phase data in binary format. Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Mark Hansen Contact_Position: Oceanographer Contact_Address: Address_Type: mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: mhansen@usgs.gov Process_Step: Process_Description: Differentially Corrected Navigation Processing- The coordinate values of the reference GPS base stations obtained from OPUS were provided in the ITRF00 coordinate system. All survey data for the project was referenced to WGS84. Consequently, reference station coordinates were transformed to WGS84 coordinates using the NOAA/NGS software HTDP v1.3. The respective reference (base) station coordinates utilized as reference positions were imported into PNAV v2.0 software by ASHTECH, Inc. Differentially corrected rover trajectories were computed by merging the master and rover the GPS data. During processing, steps were taken to ensure that the trajectories between the base and rover were clean, resulting in fixed positions. By analyzing the graphs, trajectory maps, and processing logs that GrafNav produces for each GPS session, GPS data from satellites flagged by the program as having poor health or satellite time segments that had cycle slips could be excluded, or the satellite elevation mask angle could be adjusted to improve the position solutions. The final differentially corrected precise DGPS positions were computed for each rover GPS session and exported in ASCII text format. Process_Date: 1999 Source_Produced_Citation_Abbreviation: Boat trajectory data files in ASCII text format. Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Mark Hansen Contact_Organization: U.S. Geological Survey Contact_Position: Oceanographer Contact_Address: Address_Type: mailing and physical address Address: 600 Fourth St. South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Contact_Voice_Telephone: 727-502-8000 Contact_Facsimile_Telephone: 727-502-8032 Contact_Electronic_Mail_Address: mhansen@usgs.gov Process_Step: Process_Description: Single-beam Bathymetry Processing- All data were processed using SANDS version 1.2. The primary purpose of SANDS is to time synchronize processed trajectories, soundings, and heave/pitch/roll, then merge all data strings. SANDS applies latency errors, applies geometric corrections for antenna staff pitch and roll, applies geometric corrections for antenna transducer pitch and roll (beam correction), time synchronizes the GPS trajectory and HYPACK files for each GPS epoch, and converts WGS84 latitude/longitude coordinates to North American Datum of 1983 NAD83/GRS80 UTM coordinates (m), and applies a geoid separation based upon NOAA/NGS the Geoid99 model. Latitude/longitude conversion to UTM coordinates was accomplished using NOAA/NGS UTM v2.0 software. Intermediate output files are comma delimited text files containing: time of day (seconds of day), UTM X coordinate (m), UTM Y coordinate (m), ellipsoid height, orthometric height, smoothed raw depths, PNAV RMS value, and HYPACK line number. A header line indicates the attributes entry for each column. Source_Used_Citation_Abbreviation: Completely processed final XYZ files representing sea-floor elevations. Process_Date: 1999 Source_Produced_Citation_Abbreviation: Final processed bathymetry data files in ASCII text format. Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Mark Hansen Contact_Organization: U.S. Geological Survey (USGS) - St. Petersburg Coastal and Marine Science Center Contact_Position: Oceanographer Contact_Address: Address_Type: mailing and physical address Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: 727-502-8000 Contact_Facsimile_Telephone: 727-502-8032 Contact_Electronic_Mail_Address: mhansen@usgs.gov Process_Step: Process_Description: The final processed bathymetry files were reformatted for publication. UTM coordinate were converted to latitude/longitude using NOAA/NGS UTMS v2.0 software. Shapefiles were created from X,Y,Z text files using in-house developed software. Process_Date: 2015 Source_Produced_Citation_Abbreviation: DS1031-FLBay_NAVD88-G99_SB.xyz.txt, DS1031-FLBay_NAVD88-G99_SB.xyz.shp Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Mark Hansen Contact_Position: Oceanographer Contact_Address: Address_Type: mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: (727) 502-8000 Contact_Facsimile_Telephone: (727) 502-8032 Contact_Electronic_Mail_Address: mhansen@usgs.gov Process_Step: Process_Description: Added keywords section with USGS persistent identifier as theme keyword. Process_Date: 20201013 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: VeeAnn A. Cross Contact_Position: Marine Geologist Contact_Address: Address_Type: Mailing and Physical Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2251 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: vatnipp@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Point Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point Point_and_Vector_Object_Count: 2138572 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 0.0000001 Longitude_Resolution: 0.0000001 Geographic_Coordinate_Units: decimal degrees Geodetic_Model: Horizontal_Datum_Name: WGS84-G1150 Ellipsoid_Name: WGS84 Semi-major_Axis: 6378137.0 Denominator_of_Flattening_Ratio: 298.257223563 Vertical_Coordinate_System_Definition: Depth_System_Definition: Depth_Datum_Name: NAVD88 Depth_Resolution: 0.01 Depth_Distance_Units: meters Depth_Encoding_Method: Explicit depth coordinate included with horizontal coordinates Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: DS1031-FLBay_NAVD88-G99_SB.xyz.txt, DS1031-FLBay_NAVD88-G99_SB.xyz.shp Entity_Type_Definition: Post-processed, area-specific x,y,z attributed single-beam bathymetry data. Entity_Type_Definition_Source: USGS Attribute: Attribute_Label: FID Attribute_Definition: Field ID Attribute_Definition_Source: USGS Attribute_Domain_Values: Unrepresentable_Domain: Sequential unique whole numbers that are automatically generated. Attribute: Attribute_Label: longitude Attribute_Definition: WGS84(G1150) x-coordinate (easting) of sample point Attribute_Definition_Source: NOAA/NGS UTMS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -81.129695 Range_Domain_Maximum: -80.377526 Attribute_Units_of_Measure: decimal degrees Attribute_Measurement_Resolution: 0.00000001 Attribute: Attribute_Label: latitude Attribute_Definition: WGS84(G1150) y-coordinate (northing) of sample point Attribute_Definition_Source: NOAA/NGS UTMS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 24.742478 Range_Domain_Maximum: 25.243716 Attribute_Units_of_Measure: decimal degrees Attribute_Measurement_Resolution: 0.00000001 Attribute: Attribute_Label: z-ellipsoid height Attribute_Definition: WGS84(G1150) ellipsoid height of sample point, in meters Attribute_Definition_Source: SANDS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -34.264 Range_Domain_Maximum: -20.0 Attribute_Units_of_Measure: meters Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: z-NAVD88 Attribute_Definition: Orthometric height of sample point, in meters. Relative to geoid model Geoid99. Attribute_Definition_Source: SANDS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -10.68 Range_Domain_Maximum: -0.16 Attribute_Units_of_Measure: meters Attribute_Measurement_Resolution: 0.001 Distribution_Information: Distributor: Contact_Information: Contact_Person_Primary: Contact_Person: Mark E. Hansen Contact_Organization: U.S. Geological Survey Contact_Position: Oceanographer Contact_Address: Address_Type: mailing and physical address Address: 600 Fourth St. South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Contact_Voice_Telephone: (727) 502-8000 Contact_Facsimile_Telephone: (727) 502-8032 Contact_Electronic_Mail_Address: mhansen@usgs.gov Resource_Description: Single-beam bathymetry, vessel (R/V Streeterville) acquired, bathymetric data. Distribution_Liability: The data have no explicit or implied guarantees. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although these data have been processed successfully on a computer system at the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. The USGS or the U.S. Government shall not be held liable for improper or incorrect use of the data described and/or contained herein. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: ASCII Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://pubs.usgs.gov/ds/1031/download/FLBay/soundings/DS1031-FLBay_WGS84_NAVD88-G99_SB_txt.xyz.zip Fees: none Metadata_Reference_Information: Metadata_Date: 20201013 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Mark Hansen Contact_Position: Oceanographer Contact_Address: Address_Type: mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: mhansen@usgs.gov Metadata_Standard_Name: FGDC Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Use_Constraints: The U.S. Geological Survey requests that it be referenced as the originator of this dataset in any future products or research derived from these data. Metadata_Security_Information: Metadata_Security_Classification_System: None Metadata_Security_Classification: Unclassified Metadata_Security_Handling_Description: None