Metadata: Identification_Information: Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 20161110 Title: Lidar-Derived Bare-Earth XYZ for EAARL Coastal Topography—Fire Island, New York, 2002 Edition: first Geospatial_Data_Presentation_Form: tabular digital data Series_Information: Series_Name: U.S. Geological Survey Data Release Issue_Identification: doi:10.5066/F7VT1Q7V Publication_Information: Publication_Place: St. Petersburg, FL Publisher: U.S. Geological Survey Online_Linkage: https://doi.org/10.5066/F7VT1Q7V Description: Abstract: ASCII XYZ data for Fire Island, New York, was produced from remotely sensed, geographically referenced elevation measurements collected October 25 and November 8, 2002 by the U.S. Geological Survey, in cooperation with the National Park Service (NPS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the first-generation Experimental Advanced Airborne Research Lidar (EAARL-A), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the Earth's surface through an opening in the bottom of the aircraft's fuselage. The laser system records the time difference between emission of the laser beam and the reception of the reflected laser signal in the aircraft. The plane travels over the target area at approximately 55 meters per second at an elevation of approximately 300 meters, resulting in a laser swath of approximately 240 meters. More than 100 kilometers of coastline can be surveyed easily within a 3- to 4-hour mission. When resultant elevation maps for an area are analyzed, they provide a useful tool to make management decisions regarding land development. Purpose: The purpose of this project was to produce a highly detailed and accurate digital elevation map for a portion of Fire Island, New York, for use as a management tool and to make these data available to natural-resource managers and research scientists. To ensure that SPCMSC data management protocols were followed, this survey was retroactively assigned a USGS field activity number (FAN), 02LTS09. Additional survey and data details are available at http://cmgds.marine.usgs.gov/fan_info.php?fan=02LTS09. Supplemental_Information: Raw lidar data are not in a format that is generally usable by natural-resource managers and research scientists for scientific analysis. Converting dense lidar elevation data into a readily usable format without loss of essential information requires specialized processing. The U.S. Geological Survey's Coastal and Marine Geology Program (CMGP) has developed custom software to convert raw lidar data into a GIS-compatible map product to be provided to GIS specialists, managers, and scientists. The primary tool used in the conversion process is Airborne Lidar Processing System (ALPS), a multitiered processing system developed originally by a USGS-NASA collaborative project. Specialized processing algorithms are used to convert raw waveform lidar data acquired by the EAARL-A to georeferenced spot (x,y,z) returns for "first surface" and "bare earth" topography. The terms first surface and bare earth refer to the digital elevation data of the terrain, although first-surface data include vegetation, buildings, and other manmade structures, bare-earth data do not. The zero crossing of the second derivative (that is, detection of stationary points) is used to detect the first return, resulting in "first surface" topography, whereas the trailing edge algorithm (that is, the algorithm searches for the location before the last return where direction changes along the trailing edge) is used to detect the range to the last return, or "bare earth" (the first and last returns being the first and last significant measurable part of the return pulse). Statistical filtering, known as the Random Consensus Filter (RCF), is used to remove false bottom returns and other outliers from the EAARL-A topography data. The filter uses a grid of non-overlapping square cells (buffer) of user-defined size overlaid onto the original point cloud. The user also defines the vertical tolerance (vertical width) based on the topographic complexity and point-sampling density of the data. The maximum allowable elevation range within a cell is established by this vertical tolerance. An iterative process searches for the maximum concentration of points within the vertical tolerance and removes those points outside of the tolerance (Nayegandhi and others, 2009). These data are then converted to the North American Datum of 1983 and the North American Vertical Datum of 1988 (using the GEOID99 model); please note that these data are not suitable for determining absolute elevation measurements. Time_Period_of_Content: Time_Period_Information: Multiple_Dates/Times: Single_Date/Time: Calendar_Date: 20021025 Single_Date/Time: Calendar_Date: 20021108 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -73.31519875 East_Bounding_Coordinate: -72.74826313 North_Bounding_Coordinate: 40.78147666 South_Bounding_Coordinate: 40.61020239 Keywords: Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:a1e65d0c-5f35-44df-87ea-b22b42c675c9 Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: elevation Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: LIDAR Theme_Keyword: topography Theme_Keyword: digital elevation models Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: Airborne Lidar Processing System Theme_Keyword: ALPS Theme_Keyword: Cessna 310 Theme_Keyword: EAARL Theme_Keyword: Experimental Advanced Airborne Research Lidar Theme_Keyword: laser altimetry Theme_Keyword: lidar Theme_Keyword: remote sensing Theme_Keyword: topography Theme_Keyword: point cloud data Theme: Theme_Keyword_Thesaurus: Global Change Master Science Directory Theme_Keyword: OCEAN > BATHYMETRY/SEAFLOOR TOPOGRAPHY > SEAFLOOR TOPOGRAPHY Theme_Keyword: OCEAN > COASTAL PROCESSES > COASTAL ELEVATION Theme_Keyword: DOI/USGS/CMG > COASTAL AND MARINE GEOLOGY, U.S. GEOLOGICAL SURVEY, U.S. DEPARTMENT OF INTERIOR Theme: Theme_Keyword_Thesaurus: GCMD Instrument Theme_Keyword: LIDAR > LIGHT DETECTION AND RANGING Theme: Theme_Keyword_Thesaurus: Data Categories for Marine Planning Theme_Keyword: distributions Theme_Keyword: bathymetry and elevation Theme: Theme_Keyword_Thesaurus: Marine Realms Information Bank (MRIB) Keywords Theme_Keyword: altimetry Theme_Keyword: topographic mapping Place: Place_Keyword_Thesaurus: Geographic Names Information System Place_Keyword: Fire Island Place_Keyword: Long Island Place_Keyword: New York Stratum: Stratum_Keyword_Thesaurus: None Stratum_Keyword: Bare Earth Temporal: Temporal_Keyword_Thesaurus: None Temporal_Keyword: 2002 Access_Constraints: None Use_Constraints: Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. The U.S. Geological Survey requests to be acknowledged as originator of these data in future products or derivative research. Point_of_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Xan Fredericks Contact_Organization: U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL Contact_Position: Cartographer/Lidar Coordinator Contact_Address: Address_Type: mailing and physical address Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: 727 502-8086 Contact_Facsimile_Telephone: 727 502-8182 Contact_Electronic_Mail_Address: afredericks@usgs.gov Hours_of_Service: M-F, 8:00-4:00 ET Data_Set_Credit: Acknowledgment of the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, as a data source would be appreciated in products developed from these data, and such acknowledgment as is standard for citation and legal practices for data source is expected. Sharing of new data layers developed directly from these data would also be appreciated by the U.S. Geological Survey staff. Users should be aware that comparisons with other datasets for the same area from other periods may be inaccurate because of inconsistencies resulting from changes in photointerpretation, mapping conventions, and digital processes over time. These data are not legal documents and are not to be used as such. Security_Information: Security_Classification_System: Unclassified Security_Classification: Unclassified Security_Handling_Description: None Native_Data_Set_Environment: Microsoft Windows 7 Enterprise Service Pack 1; Esri ArcCatalog 10.2.2 Cross_Reference: Citation_Information: Originator: Nayegandhi, A., Brock, J.C., and Wright, C.W. Publication_Date: 2009 Title: Small footprint, waveform-resolving lidar estimation of submerged and subcanopy topography in coastal environments Series_Information: Series_Name: International Journal of Remote Sensing Issue_Identification: v. 30 no. 4, p. 861-878 Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: The expected accuracy of the measured variables are as follows: attitude within 0.07 degree, 3-cm nominal ranging accuracy, and vertical elevation accuracy of +/-20 cm for the "first return" surface. Quality checks are built into the data-processing software. Logical_Consistency_Report: These data are located in UTM Zone 18. Completeness_Report: All elevation measurements within the bounding coordinates of the Fire Island National Seashore were used to derive this dataset. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Raw lidar measurements have been determined to be within 1 meter in horizontal accuracy. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: Elevations of the DEM are vertically consistent with the point elevation data, +/-20 cm. Lineage: Process_Step: Process_Description: The data are collected using a Cessna 310 aircraft. The NASA Experimental Advanced Airborne Research Lidar (EAARL) laser scanner collects the data using a green (532nm) raster scanning laser, while a digital camera acquires a visual record of the flight. The data are stored on hard drives and archived at the USGS office in St. Petersburg and the NASA office at Wallops Flight Facility. The navigational data are processed at Wallops Flight Facility. The navigational and raw data are then downloaded into ALPS, or the Airborne Lidar Processing System (20040401). Data are converted from units of time to x,y,z points for elevation, with quality checks built into the software. The data are then datum converted to the North American Vertical Datum of 1988 using GEOID99. Process_Date: 20040401 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Xan Fredericks Contact_Organization: U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL Contact_Position: Cartographer/Lidar Coordinator Contact_Address: Address_Type: mailing and physical address Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: 727 502-8086 Contact_Electronic_Mail_Address: afredericks@usgs.gov Hours_of_Service: M-F, 8:00-4:00 ET Process_Step: Process_Description: Metadata imported into ArcCatalog 10.1.1.3143 from XML file. Process_Date: 20161006 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Xan Fredericks Contact_Organization: U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL Contact_Position: Cartographer/Lidar Coordinator Contact_Address: Address_Type: mailing and physical address Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: 727 502-8086 Contact_Electronic_Mail_Address: afredericks@usgs.gov Hours_of_Service: M-F, 8:00-4:00 ET Process_Step: Process_Description: Keywords section of metadata optimized for discovery in USGS Coastal and Marine Geology Data Catalog. Process_Date: 20170124 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Alan O. Allwardt Contact_Position: Contractor -- Information Specialist Contact_Address: Address_Type: mailing and physical address Address: 2885 Mission Street City: Santa Cruz State_or_Province: CA Postal_Code: 95060 Contact_Voice_Telephone: 831-460-7551 Contact_Facsimile_Telephone: 831-427-4748 Contact_Electronic_Mail_Address: aallwardt@usgs.gov Process_Step: Process_Description: Added keywords section with USGS persistent identifier as theme keyword. Process_Date: 20201013 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: VeeAnn A. Cross Contact_Position: Marine Geologist Contact_Address: Address_Type: Mailing and Physical Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2251 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: vatnipp@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Point Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 18 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.999600 Longitude_of_Central_Meridian: -75.000000 Latitude_of_Projection_Origin: 0 False_Easting: 500000.000000 False_Northing: 0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: coordinate pair Coordinate_Representation: Abscissa_Resolution: 1.0 Ordinate_Resolution: 1.0 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 Ellipsoid_Name: Geodetic Reference System 80 Semi-major_Axis: 6378137.000000 Denominator_of_Flattening_Ratio: 298.25722210100002 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Datum_Name: North American Vertical Datum of 1988 (GEOID99) Altitude_Resolution: 0.20 Altitude_Distance_Units: meters Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: FIIS2002_EAARLA_BE_z18_n88g99.xyz Entity_Type_Definition: This file contains location and elevation data (.xyz), which is provided in ASCII space-delimited format. Entity_Type_Definition_Source: Internally devised to maintain naming consistency. Attribute: Attribute_Label: X Attribute_Definition: UTM easting in meters Attribute_Definition_Source: North American Datum of 1983 Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 642508.696 Range_Domain_Maximum: 690033.271 Attribute: Attribute_Label: Y Attribute_Definition: UTM northing in meters Attribute_Definition_Source: North American Datum of 1983 Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4497912.709 Range_Domain_Maximum: 4515871.460 Attribute: Attribute_Label: Z Attribute_Definition: Altitude in meters Attribute_Definition_Source: North American Vertical Datum of 1988 (GEOID99) Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -32.57 Range_Domain_Maximum: 14.25 Overview_Description: Entity_and_Attribute_Overview: The input parameters for the random consensus filter (RCF) were: grid cell size (buffer) = 400 centimeters x 400 centimeters; vertical tolerance (vertical width) = 50 centimeters for bare-earth topography. Entity_and_Attribute_Detail_Citation: http://pubs.usgs.gov/of/2009/1078/ Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Xan Fredericks Contact_Position: Cartographer/Lidar Coordinator Contact_Address: Address_Type: mailing and physical address Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: 727 502-8086 Hours_of_Service: M-F, 8:00-4:00 ET Resource_Description: FIIS2002_EAARLA_BE_z18_n88g99.xyz Distribution_Liability: Although these data have been processed successfully on a computer system at the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data on any other system, or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. The USGS shall not be held liable for improper or incorrect use of the data described or contained herein. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: ASCII Format_Version_Number: 1 Format_Specification: XYZ Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://coastal.er.usgs.gov/data-release/doi-F7VT1Q7V/data/FIIS2002_EAARLA_BE_z18_n88g99.zip Fees: None Ordering_Instructions: Contact U.S. Geological Survey. Turnaround: Vary Custom_Order_Process: Contact U.S. Geological Survey for details. Metadata_Reference_Information: Metadata_Date: 20201102 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Xan Fredericks Contact_Organization: U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL Contact_Position: Cartographer/Lidar Coordinator Contact_Address: Address_Type: mailing and physical address Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: 727 502-8086 Contact_Electronic_Mail_Address: afredericks@usgs.gov Hours_of_Service: M-F, 8:00-4:00 ET Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Time_Convention: local time