Metadata: Identification_Information: Citation: Citation_Information: Originator: Kimberly Yates Originator: Christopher Moore Originator: Nathan Goldstein Publication_Date: 20170915 Title: Time Series of Autonomous Carbonate System Parameter Measurements in Tampa Bay, Florida, USA Geospatial_Data_Presentation_Form: Tabular Digital Data Series_Information: Series_Name: U.S. Geological Survey Data Release Issue_Identification: doi:10.5066/F77H1GTW Publication_Information: Publication_Place: St. Petersburg, FL Publisher: U.S Geological Survey Online_Linkage: https://doi.org/10.5066/F77H1GTW Description: Abstract: This dataset contains carbonate system data collected by scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center to investigate the effects of carbon cycling, coastal and ocean acidification on the Tampa Bay estuary located in west central Florida, USA. These data were collected using an autonomous instrument called the Ocean Carbon System (OCS) deployed on the seafloor in Tampa Bay. The OCS consists of five sensors integrated into a Sea-Bird Scientific (Satlantic) STOR-X submersible data logger including a Seabird 16plus CTD, a Satlantic SeaFET pH sensor, a Pro-Oceanus CO2-Pro CO2 sensor, an Aanderaa oxygen optode, and a Wetlabs Eco-PAR sensor. The dataset is a time series of carbonate system parameters including: water temperature (Celsius, °C), conductivity (siemens, S), pressure (decibar, dbar), salinity, pHT (pH on the total scale), carbon dioxide (ppm), pressure from the CO2-Pro Infrared Gas Analyzer (IRGA) (millibars), dissolved oxygen (micromoles) and photosynthetically available radiation (microEinsteins). Each parameter was measured every hour for 24-hour time periods during extended deployments ranging from weeks to months. Purpose: This dataset was acquired to assist USGS staff with the quantification, analysis and interpretation of geochemical time series data that will ultimately be used in assessments and research of or related to carbon cycling, coastal and ocean acidification. Time_Period_of_Content: Time_Period_Information: Multiple_Dates/Times: Single_Date/Time: Calendar_Date: 201505 Single_Date/Time: Calendar_Date: 201601 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: As needed Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -82.69355 East_Bounding_Coordinate: -82.55417 North_Bounding_Coordinate: 27.96125 South_Bounding_Coordinate: 27.63611 Keywords: Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:23fca843-bcc5-4d60-9385-ceb1859907f8 Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: GeoscientificInformation Theme_Keyword: Environment Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: Geochemistry Theme_Keyword: Time series analysis Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: Carbonate Theme_Keyword: Ocean carbon system Theme_Keyword: Water temperature Theme_Keyword: Conductivity Theme_Keyword: Pressure Theme_Keyword: Salinity Theme_Keyword: pH Theme_Keyword: CO2 Theme_Keyword: Pressure Theme_Keyword: PRES(IRGA) Theme_Keyword: Dissolved oxygen Theme_Keyword: Photosynthetically active radiation Theme_Keyword: Ocean acidification Theme_Keyword: PAR Theme_Keyword: Seafloor Theme_Keyword: Carbon Theme_Keyword: Coastal acidification Theme_Keyword: Total alkalinity Theme_Keyword: Dissoved inorganic carbon Theme_Keyword: Lower Tampa Bay Theme_Keyword: Middle Tampa Bay Theme_Keyword: Physical Oceanographic Real-Time System (PORTS) Place: Place_Keyword_Thesaurus: Geographic Names Information System (GNIS) Place_Keyword: Florida Place_Keyword: Tampa Bay Place_Keyword: Old Tampa Bay Place_Keyword: Gulf of Mexico Stratum: Stratum_Keyword_Thesaurus: None Stratum_Keyword: Seafloor Temporal: Temporal_Keyword_Thesaurus: None Temporal_Keyword: Anthropocene Temporal_Keyword: Diurnal Temporal_Keyword: Diel Temporal_Keyword: Seasonal Temporal_Keyword: Annual Temporal_Keyword: Interannual Access_Constraints: none Use_Constraints: Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. The U.S. Geological Survey requests to be acknowledged as originators of the data in future products or derivative research. Point_of_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Kimberly Yates Contact_Organization: United States Geological Survey Contact_Address: Address_Type: mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: US Contact_Voice_Telephone: 727-502-8059 Contact_Electronic_Mail_Address: kyates@usgs.gov Data_Set_Credit: Please acknowledgment the USGS St. Petersburg Coastal and Marine Science Center and cite the USGS data release as the source for all products developed from these data. Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: All sensor data were subject to preliminary QA/QC. A two-step procedure has been taken to remove outliers. During the first step, data beyond the measurement ranges for sensors were flagged with a quality flag of 4 to indicate bad data. Next, data parameters were plotted to examine temporal trends and cross-correlation (for example, pCO2 vs. pH), as predictable relationships (linear or exponential) have been observed in previous discrete and autonomous measurements in Tampa Bay. Data points that deviate from temporal and/or correlation trends were flagged with a quality flag of 4 (indicating bad data). Missing data points are marked in data columns with the value -999, and are also marked with a quality flag of 9. Logical_Consistency_Report: Data were checked to insure all values fall within the range of analysis for each sensor, and outliers were marked with a quality flag of 4. Data were checked for missing or duplicate data points and marked as indicated in the description of data quality flags. Geospatial data were plotted in either ArcGIS or in Google Earth to verify accuracy of the location. Completeness_Report: Data set is considered complete for the information presented, as described in the abstract. Users are advised to read the rest of the metadata record carefully for additional details. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Accuracy was checked against global positioning system (GPS) values provided by the manufacturer. Garmin GPSMAP64st and Garmin GPSmap 60CSx FPSMAP60 accuracy, < 10 meters Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: Accuracy was checked against global positioning system (GPS) values provided by the manufacture. Garmin GPSMAP64st and Garmin GPSmap 60CSx FPSMAP60 accuracy, < 10 meters Lineage: Process_Step: Process_Description: OCS Description: The Ocean Carbon System (OCS) consists of 5 sensors, 1 pump, 2 batteries, and 1 STOR-X submersible data logger. The equipment models and serial numbers (s/n) are: Pro-Oceanus CO2-Pro (s/n 049) for measurement of carbon dioxide concentration; Sea-Bird/Satlantic SeaFET pH sensor (s/n 31) for measurement of pH on the total scale; Sea-Bird SBE 16plus V2 SeaCAT C-T (P) recorder (s/n 16P40144-4781) for measurement of conductivity, temperature and depth; Sea-Bird/WET Labs ECO-PAR (s/n PARS-307) for measurement of photo-synthetically active radiation (PAR); Aanderra Oxygen Optode 4831 (s/n 116) for measurement of dissolved oxygen; Sea-Bird/Satlantic STOR-X (s/n 133) and a Sea-Bird SBE-5P submersible pump (s/n 6679). Sensor resolution is as follows: Pro-Oceanus CO2-Pro 0.01 ppm; 1mb for PRESS(IRGA); SeaFET +/-0.05 pH; Sea-Bird SBE 16plu V2s SeaCAT 0.0001 degrees C for temperature; 0.00005 siemens for conductivity and 0.002% of full scale range of 7000 meters; ECO-PAR 14-bit digital output resolution; and Aanderra Optode <1 micromol/L for concentration. The sensors were packaged as a single unit in a custom designed platform that was mounted within a Miniaturized Trawl Resistant Bottom Mount (MTRBM). The Sea-Bird SBE-5P submersible pump pulls water through a stainless steel mesh strainer and pumps the water to the CO2-Pro for pCO2 measurement before flowing into the SeaFET for pH analysis. The sensors not requiring flow are located in close proximity to the pump intake and measure ambient water. The MTRBM has multiple openings to allow mixing with ambient water. The STOR-X is powered by two removable Satlantic Panasonic Industrial Alkaline AM-1PI battery packs, each consisting of 7 parallel sets of 10 cells in series in a factory shrink-wrapped package. The STOR-X distributes power to the attached sensors according to a custom schedule. The OCS operates 24 hours per day, with a sampling acquisition period once every hour at the half-hour mark prefaced by a 20 minute warm up period for the CO2-Pro. The sampling acquisition period runs for 00:01:10. The CO2 sensor re-zeros every 8 hours and collects 21 CO2 and PRESS(IRGA) measurements during each sampling period. The Aanderra sensor collects 6 or 7 dissolved oxygen measurements per sample period. The ECO-PAR sensor collects approximately 30 PAR measurements per sample period. The SeaFET collects 10 pH measurements per sample period. The SBE 16Plus collects 1 conductivity, temperature and pressure measurement per sampling period. Data Storage and Preprocessing: Data are managed and stored by the STOR-X data logger. Acquired data are saved into sensor-specific .raw files that contain the information for each Julian day. Downloading this data from the site occurs at regular intervals to ensure the sensors operational status. Downloading these .raw files from the STOR-X requires the use of STORXCom software to communicate between the STOR-X and a computer. Once the data are downloaded, SatCon version 1.5 Data Conversion program converts the .raw files into .dat files and applies any processing required. Individual sensor Julian day .dat files are then combined into one large multi-day dataset per sensor. These files are opened in Microsoft (MS) Excel 2010 and saved in the .xlsx format. The combined multiday files contain headers for each individual day file that are strung together; these must be manually removed in MS Excel leaving only the top header line. Multi-day files are then processed through a custom averaging code written in Pearl, designed by David Zawada (USGS). This code averages the multiple measurements from each sensor per sampling period to generate a single averaged value for each sensor per sampling period, reported at the start time of the sampling period and day. In addition to averaging parameter values, the code also provides the mean, standard deviation, minimum and maximum for each sampling period. Averaged data for each sensor parameter are then manually merged into a single .xlsx file for further processing. Data files are deleted from the STOR-X after confirmation of successful download and storage of parameter data. Advanced Data Processing: Preliminary QA/QC of sensor data are performed after averaged data are compiled into .xlsx files and after advanced data processing is performed. The SeaFET pH data are corrected for salinity and temperature, using Sea-Bird SBE 16plus SeaCAT C-T (P) recorder data through a MS Excel macro provided by Satlantic. The Satlantic macro is also used to calibrate the SeaFET pH data to discrete pH measurements determined in- situ and concurrently with OCS sample acquisition using, spectrophotometric pH methods. Aanderra dissolved oxygen (DO) data are corrected for temperature, salinity, and pressure using the Sea-Bird SBE 16plus SeaCAT C-T (P) recorder data and a MS Excel macro provided by Aanderra. Once corrections have been completed, parameter data are plotted to examine sensor performance and identify non-trending outliers. Cross validation of sensor parameters is performed to further analyze outliers and identify questionable or bad data points. Preliminary QA/QC does not include validation of sensor data against discretely measured parameters and are, thus, considered preliminary, non-validated data. Process_Date: 2015 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Kimberly Yates Contact_Organization: USGS Contact_Address: Address_Type: mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: Florida Postal_Code: 33701 Country: USA Contact_Voice_Telephone: 727-502-8059 Contact_Electronic_Mail_Address: kyates@usgs.gov Process_Step: Process_Description: Added keywords section with USGS persistent identifier as theme keyword. Process_Date: 20201013 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: VeeAnn A. Cross Contact_Position: Marine Geologist Contact_Address: Address_Type: Mailing and Physical Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2251 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: vatnipp@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Point Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: Tampa-Bay-OCS-Data Entity_Type_Definition: Time series data collected from Tampa Bay, FL, in May 2015 and January 2016. Spreadsheet contains: coordinates, date, time, conductivity, water temperature, pressure at depth, salinity, pH, CO2, measurement chamber pressure for CO2, dissolved oxygen, photosynthetically active radiation and data quality flags for each parameter. Entity_Type_Definition_Source: USGS Attribute: Attribute_Label: Site description Attribute_Definition: Description of the physical location and attributes of the location where the measurements were collected. Attribute_Definition_Source: USGS Attribute_Domain_Values: Unrepresentable_Domain: The name of the geographic location and a brief description of the seafloor characteristics at the sampling location. Attribute: Attribute_Label: Latitude Attribute_Definition: Latitude coordinates measured in the World Geodetic System of 1984 Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 27.63611 Range_Domain_Maximum: 27.96125 Attribute_Units_of_Measure: Decimal degrees Attribute: Attribute_Label: Longitude Attribute_Definition: Longitude coordinates measured in the World Geodetic System of 1984 Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -82.69355 Range_Domain_Maximum: -82.55417 Attribute_Units_of_Measure: Decimal degrees Attribute: Attribute_Label: DATETAG Attribute_Definition: A numeric identifier for the Julian calendar date used by the USGS on the day of sample collection. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2015-131 Range_Domain_Maximum: 2016-021 Attribute_Units_of_Measure: Units correspond to year and Julian day number in the format YYYY-DDD Attribute: Attribute_Label: TIMETAG Attribute_Definition: Timestamp showing the time of day each sample was collected. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 00:30:04 Range_Domain_Maximum: 23:30:13 Attribute_Units_of_Measure: Hours, minutes, seconds in the format HH:MM:SS Attribute: Attribute_Label: T(W) (C) Attribute_Definition: Water temperature measured in degrees Celsius Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 12.59 Range_Domain_Maximum: 32.04 Attribute_Units_of_Measure: Celsius Attribute: Attribute_Label: QF_T(W) Attribute_Definition: A numeric value that indicates the quality of reported temperature data. Attribute_Definition_Source: NOAA National Centers for Environmental Information (NCEI) https://www.nodc.noaa.gov/GTSPP/document/codetbls/gtsppcodes/gtspp_qual.html Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 1 Enumerated_Domain_Value_Definition: Flag 0= No quality control (QC) performed, Flag 1 = QC has been performed and element appears to be correct, Flag 2 = QC has been performed and element appears to be probably good with other elements, Flag 3 = QC has been performed and element appears to be probably bad, Flag 4 = QC has been performed and element appears to be bad, Flag 5 = the value has been modified as a result of QC, Flag 9 = The value of the element is missing. Enumerated_Domain_Value_Definition_Source: NOAA NCEI Attribute: Attribute_Label: COND (S) Attribute_Definition: Conductivity measured in Siemens Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.77148 Range_Domain_Maximum: 5.63905 Attribute_Units_of_Measure: Siemens Attribute: Attribute_Label: QF_COND Attribute_Definition: A numeric value that indicates the quality of the reported conductivity data. Attribute_Definition_Source: NOAA NCEI Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 1 Enumerated_Domain_Value_Definition: Flag 0= No quality control (QC) performed, Flag 1 = QC has been performed and element appears to be correct, Flag 2 = QC has been performed and element appears to be probably good with other elements, Flag 3 = QC has been performed and element appears to be probably bad, Flag 4 = QC has been performed and element appears to be bad, Flag 5 = the value has been modified as a result of QC, Flag 9 = The value of the element is missing. Enumerated_Domain_Value_Definition_Source: NOAA NCEI Attribute: Attribute_Label: PRESS (dbar) Attribute_Definition: Pressure measured in decibars Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.593 Range_Domain_Maximum: 30 Attribute_Units_of_Measure: 2.112 Attribute: Attribute_Label: QF_PRESS Attribute_Definition: A numeric value that indicates the quality of the reported pressure data. Attribute_Definition_Source: NOAA NCEI Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 1 Enumerated_Domain_Value_Definition: Flag 0= No quality control (QC) performed, Flag 1 = QC has been performed and element appears to be correct, Flag 2 = QC has been performed and element appears to be probably good with other elements, Flag 3 = QC has been performed and element appears to be probably bad, Flag 4 = QC has been performed and element appears to be bad, Flag 5 = the value has been modified as a result of QC, Flag 9 = The value of the element is missing. Enumerated_Domain_Value_Definition_Source: NOAA NCEI Attribute: Attribute_Label: SALINITY Attribute_Definition: A numeric value for salinity Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 22.21 Range_Domain_Maximum: 33.90 Attribute: Attribute_Label: QF_SALINITY Attribute_Definition: A numeric value that indicates the quality of the reported salinity data. Attribute_Definition_Source: NOAA NCEI Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 1 Enumerated_Domain_Value_Definition: Flag 0= No quality control (QC) performed, Flag 1 = QC has been performed and element appears to be correct, Flag 2 = QC has been performed and element appears to be probably good with other elements, Flag 3 = QC has been performed and element appears to be probably bad, Flag 4 = QC has been performed and element appears to be bad, Flag 5 = the value has been modified as a result of QC, Flag 9 = The value of the element is missing. Enumerated_Domain_Value_Definition_Source: NOAA NCEI Attribute: Attribute_Label: pHT Attribute_Definition: A numeric value for pH using the total scale. Missing data points are marked in data columns with the value -999. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 7.616 Range_Domain_Maximum: 8.522 Attribute: Attribute_Label: QF_pHT Attribute_Definition: A numeric value that indicates the quality of the reported total scale pH data. Attribute_Definition_Source: NOAA NCEI Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 1, 9 Enumerated_Domain_Value_Definition: Flag 0= No quality control (QC) performed, Flag 1 = QC has been performed and element appears to be correct, Flag 2 = QC has been performed and element appears to be probably good with other elements, Flag 3 = QC has been performed and element appears to be probably bad, Flag 4 = QC has been performed and element appears to be bad, Flag 5 = the value has been modified as a result of QC, Flag 9 = The value of the element is missing. Enumerated_Domain_Value_Definition_Source: NOAA NCEI Attribute: Attribute_Label: CO2 (ppm) Attribute_Definition: A numeric value for the concentration of CO2 in parts per million by volume. Missing data points are marked in data columns with the value -999. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 93.3 Range_Domain_Maximum: 2000 Attribute_Units_of_Measure: 1063 Attribute: Attribute_Label: QF_CO2 Attribute_Definition: A numeric value that indicates the quality of the reported CO2 concentration data. Attribute_Definition_Source: NOAA NCEI Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 1, 9 Enumerated_Domain_Value_Definition: Flag 0= No quality control (QC) performed, Flag 1 = QC has been performed and element appears to be correct, Flag 2 = QC has been performed and element appears to be probably good with other elements, Flag 3 = QC has been performed and element appears to be probably bad, Flag 4 = QC has been performed and element appears to be bad, Flag 5 = the value has been modified as a result of QC, Flag 9 = The value of the element is missing. Enumerated_Domain_Value_Definition_Source: NOAA NCEI Attribute: Attribute_Label: PRES(IRGA) (mbar) Attribute_Definition: A numeric value for pressure in the sampling chamber of the infrared gas analyzer of the CO2 sensor. Missing data points are marked in data columns with the value -999. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 965 Range_Domain_Maximum: 1063 Attribute_Units_of_Measure: mbar Attribute: Attribute_Label: QF_PRES(IRGA) Attribute_Definition: A numeric value that indicates the quality of the reported IRGA pressure data. Attribute_Definition_Source: NOAA NCEI Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 1, 9 Enumerated_Domain_Value_Definition: Flag 0= No quality control (QC) performed, Flag 1 = QC has been performed and element appears to be correct, Flag 2 = QC has been performed and element appears to be probably good with other elements, Flag 3 = QC has been performed and element appears to be probably bad, Flag 4 = QC has been performed and element appears to be bad, Flag 5 = the value has been modified as a result of QC, Flag 9 = The value of the element is missing. Enumerated_Domain_Value_Definition_Source: NOAA NCEI Attribute: Attribute_Label: OXYGEN (micromol/L) Attribute_Definition: A numeric identifier for the concentration of oxygen in micromoles per liter of seawater Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 34.4 Range_Domain_Maximum: 474.6 Attribute_Units_of_Measure: micromol/L Attribute: Attribute_Label: QF_OXYGEN Attribute_Definition: A numeric value that indicates the quality of the reported oxygen concentration data. Attribute_Definition_Source: NOAA NCEI Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 1 Enumerated_Domain_Value_Definition: Flag 0= No quality control (QC) performed, Flag 1 = QC has been performed and element appears to be correct, Flag 2 = QC has been performed and element appears to be probably good with other elements, Flag 3 = QC has been performed and element appears to be probably bad, Flag 4 = QC has been performed and element appears to be bad, Flag 5 = the value has been modified as a result of QC, Flag 9 = The value of the element is missing. Enumerated_Domain_Value_Definition_Source: NOAA NCEI Attribute: Attribute_Label: PAR (microEinsteins) Attribute_Definition: A numeric value for the concentration of photosynthetically available radiation Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 1032.8 Attribute_Units_of_Measure: microEinsteins Attribute: Attribute_Label: QF_PAR Attribute_Definition: A numeric value that indicates the quality of the reported PAR data. Attribute_Definition_Source: NOAA NCEI Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 1 Enumerated_Domain_Value_Definition: Flag 0= No quality control (QC) performed, Flag 1 = QC has been performed and element appears to be correct, Flag 2 = QC has been performed and element appears to be probably good with other elements, Flag 3 = QC has been performed and element appears to be probably bad, Flag 4 = QC has been performed and element appears to be bad, Flag 5 = the value has been modified as a result of QC, Flag 9 = The value of the element is missing. Enumerated_Domain_Value_Definition_Source: NOAA NCEI Distribution_Information: Distributor: Contact_Information: Contact_Person_Primary: Contact_Person: Kimberly Yates Contact_Organization: United States Geological Survey Contact_Address: Address_Type: mailing and physical Address: 600th 4th Street South City: St. Petersburg State_or_Province: Florida Postal_Code: 33701 Country: USA Contact_Voice_Telephone: 727-502-8059 Contact_Electronic_Mail_Address: kyates@usgs.gov Resource_Description: Tampa-Bay-OCS-Data-May-2015.csv, Tampa-Bay-OCS-Data-Jan-2016.csv Distribution_Liability: Although these data have been processed successfully on a computer system at the USGS, no warranty expressed or implied is made regarding the display or utility of the data on any other system, or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. The USGS shall not be held liable for improper or incorrect use of the data described and (or) contained herein. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: CSV (Comma Separated Values) Format_Version_Number: none Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://coastal.er.usgs.gov/data-release/doi-F77H1GTW/data/Tampa-Bay-OCS-May-2015.zip Network_Resource_Name: https://coastal.er.usgs.gov/data-release/doi-F77H1GTW/data/Tampa-Bay-OCS-Jan-2016.zip Fees: None Metadata_Reference_Information: Metadata_Date: 20201013 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Kimberly Yates Contact_Organization: United States Geological Survey Contact_Position: Research Oceanographer Contact_Address: Address_Type: mailing and physical Address: 600th 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: USA Contact_Voice_Telephone: 727-502-8059 Contact_Electronic_Mail_Address: kyates@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998