Metadata: Identification_Information: Citation: Citation_Information: Originator: Marci E. Marot Publication_Date: 20160415 Title: Barnegat Bay surface and subsurface sediment physical parameters data from May 2014 (U.S. Geological Survey Field Activity Number 2014-310-FA) Geospatial_Data_Presentation_Form: tabular digital data Online_Linkage: https://pubs.usgs.gov/ds/0993/ds993_data.html Larger_Work_Citation: Citation_Information: Originator: Marci E. Marot Originator: Christopher G. Smith Originator: Alisha M. Ellis Originator: Cathryn J. Wheaton Publication_Date: 20160415 Title: Evaluating the Potential Effects of Hurricanes On Long-term Sediment Accumulation in Two Micro-tidal Sub-estuaries: Barnegat Bay and Little Egg Harbor, New Jersey, USA Edition: 1.0 Geospatial_Data_Presentation_Form: multimedia presentation Series_Information: Series_Name: U.S. Geological Survey Data Series Issue_Identification: 993 Publication_Information: Publication_Place: St. Petersburg, Florida Publisher: U.S. Geological Survey - St. Petersburg Coastal and Marine Science Center Online_Linkage: https://doi.org/10.3133/ds993 Description: Abstract: Barnegat Bay, located along the eastern shore of New Jersey, was significantly impacted by Hurricane Sandy in October 2012. Scientists from the U.S. Geological Survey (USGS) developed a multidisciplinary study of sediment transport and hydrodynamics to understand the mechanisms that govern estuarine and wetland responses to storm forcing. This report details the physical and chemical characteristics of surficial and downcore sediments from two areas within the bay. Eleven sites were sampled in both the central portion of the bay near Barnegat Inlet and in the southern portion of the bay in Little Egg Harbor. Laboratory analyses include Be-7, Pb-210, bulk density, porosity, x-radiographs, and grain-size distribution. These data will serve as a critical baseline dataset for understanding the current sedimentological regime and can be applied to future storms for understanding estuarine and wetland evolution.This report serves as an archive for sedimentological and radiochemical data derived from the surface sediments and box cores. Downloadable data are available as Excel spreadsheets, PDF files, and JPEG files, and includes sediment core data plots and x-radiographs, as well as, physical-properties, grain-size, alpha-spectoscopy, and gamma-spectroscopy data. Federal Geographic Data Committee metadata are available for analytical datasets in the data downloads page of this report. Purpose: The 14BRN_Physical_Data.zip file includes all bulk lithologic analysis results from surface sediments and box cores collected in Barnegat Bay, New Jersey from May 12-14, 2014 by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center. Supplemental_Information: None Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20140512 Ending_Date: 20140514 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -74.32585 East_Bounding_Coordinate: -74.12662 North_Bounding_Coordinate: 39.57150 South_Bounding_Coordinate: 39.78782 Keywords: Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:80a967bc-dd45-451d-a22b-f6d843f0e387 Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: geoscientificinformation Theme_Keyword: oceans Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: sediment Theme_Keyword: ponar grab Theme_Keyword: boxcore Theme_Keyword: physical parameters Theme_Keyword: water content Theme_Keyword: dry bulk density Theme_Keyword: porosity Theme_Keyword: loss on ignition Theme_Keyword: U.S. Geological Survey Theme_Keyword: USGS Theme_Keyword: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Place: Place_Keyword_Thesaurus: Geographic Names Information System (GNIS) Place_Keyword: New Jersey Place_Keyword: Barnegat Bay Place_Keyword: Little Egg Harbor Stratum: Stratum_Keyword_Thesaurus: None Stratum_Keyword: sediment Stratum_Keyword: surface Temporal: Temporal_Keyword_Thesaurus: None Temporal_Keyword: May 2014 Access_Constraints: none Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey - St. Petersburg Coastal and Marine Science Center Contact_Person: Marci E. Marot Contact_Position: Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: US Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: mmarot@usgs.gov Data_Set_Credit: U.S. Geological Survey Native_Data_Set_Environment: Microsoft Windows 7 Enterprise Service Pack 1; Microsoft Excel Version 2010 Use_Constraints: The U.S. Geological Survey requests that it be referenced as the originator of this dataset in any future products or research derived from these data. Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: The physical parameters reported in the tables were analyzed at the USGS SPCMSC sedimentology lab. These lithologic data have not been independently verified for accuracy. Replicate analyses of loss on ignition are reported for quality assurance. Logical_Consistency_Report: The data includes sample ID, date collected, water content, dry bulk density, porosity, and loss on ignition. Completeness_Report: This is a complete processed physical parameters data file for the May 2014 Barnegat Bay ponar sediment grabs and box cores. Lineage: Process_Step: Process_Description: In the field, the top 1-centimeter of undisturbed surface material from the ponar grab sampler and box corer was collected for sediment characterization, placed in individual storage bags, and stored on ice. The surface samples were transported to the USGS SPCMSC. Process_Date: 2014 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Marci E. Marot Contact_Position: Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: mmarot@usgs.gov Process_Step: Process_Description: In the field, the box core was subsampled with a 6-inch diameter acrylic core barrel. After inserting the core barrels into the box core, the amount of compaction of the sediment in the core barrel relative to the box core surface was measured in centimeters. The cores were sealed and transported upright to shore. On Shore the 6-inch diameter cores were vertically extruded and sectioned into 1-cm depth intervals. The subsections were placed in individual storage bags, stored on ice and transported to the USGS SPCMSC. Process_Date: 2014 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Marci E. Marot Contact_Position: Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: mmarot@usgs.gov Process_Step: Process_Description: In the laboratory, samples were homogenized in the sample bag and a subsample of each 1-cm interval was processed for basic sediment characteristics (dry bulk density and porosity). Water content, porosity and dry bulk density were determined using water mass lost during drying. Approximately 20 – 30 milliliters (mL) of each wet subsample was packed into a graduated syringe with 0.5 mL resolution. The wet sediment was then extracted into a pre-weighed aluminum tray and the weight of the wet sediment and the volume was recorded. The wet sediment and tray were placed in a drying oven for approximately 48 hours at 60°C. Water content (θ) was determined as the mass of water (mass lost when dried) relative to the initial wet sediment mass. Dry bulk density was determined by ratio of dry sediment to the known volume of sediment packed into the syringe. Porosity was calculated from the equation φ = θ / [θ+(1-θ)/ρs] where ρs is grain density assumed to be 2.5 grams per cubic centimeter (g cm-3). Salt-mass contributions were removed based on the salinity measured at the time of sample collection. Process_Date: 2014 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Marci E. Marot Contact_Position: Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: mmarot@usgs.gov Process_Step: Process_Description: Organic matter (OM) content was determined using a mass loss technique, commonly referred to as loss on ignition (LOI). The dry sediment from the processing described above was homogenized using a porcelain mortar and pestle. Approximately 1 – 5 grams (g) of dry sediment was placed into a pre-weighed porcelain crucible. The mass of the dried sediment was recorded with an analytical balance to a precision of 0.01 g. The samples were then placed into a laboratory muffle furnace with stabilizing temperature control. The furnace was ramped to 110 °C over a 30-minute interval and then held at 110 °C for 2 hours. Samples were removed and weighed to determine excess moisture loss. Samples were then placed back in the furnace. The furnace was then ramped to 550 °C over a 30-minute interval and then held at 550 °C for 6 hours. The furnace temperature was then lowered to 60 °C and held at this temperature until the sediments could be reweighed. The latter step prevents the absorption of moisture, which can affect the measurement. Samples were reweighed using the same balance and to a precision of 0.01 g. The mass lost during the 6-hour baking period relative to the initial dry mass is used as a metric of OM content (modified from Dean, 1974). Data are reported as a ratio of mass (milligrams, mg) of organic matter to mass (g) of dry sediment (post-110 °C drying). Process_Date: 2014 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Marci E. Marot Contact_Position: Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: mmarot@usgs.gov Process_Step: Process_Description: Added keywords section with USGS persistent identifier as theme keyword. Process_Date: 20201013 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: VeeAnn A. Cross Contact_Position: Marine Geologist Contact_Address: Address_Type: Mailing and Physical Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2251 Contact_Facsimile_Telephone: 508-457-2310 Contact_Electronic_Mail_Address: vatnipp@usgs.gov Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: 14BRN_Box_Cores_Physical_Data.xlsx, 14BRN_Grab_Physical_Data.xlsx Entity_Type_Definition: Physical lithological parameter results of surface sediment collected in Barnegat Bay and Little Egg Harbor, New Jersey. Entity_Type_Definition_Source: USGS Attribute: Attribute_Label: Core ID Attribute_Definition: Core identification number Attribute_Definition_Source: USGS Attribute_Domain_Values: Unrepresentable_Domain: Core site identification number assigned by USGS scientist. Attribute: Attribute_Label: Sample ID Attribute_Definition: Sample identification number Attribute_Definition_Source: USGS Attribute_Domain_Values: Unrepresentable_Domain: Ponar grab sample site identification number assigned by USGS scientist. Attribute: Attribute_Label: Depth (cm) Attribute_Definition: Depth interval measured below core surface Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 35 Attribute_Units_of_Measure: centimeters Attribute_Measurement_Resolution: 0.5 Attribute: Attribute_Label: Water Content (g-water/g-wet) Attribute_Definition: The ratio of mass of water to the mass of wet sediment in the individual sample interval Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.20 Range_Domain_Maximum: 0.65 Attribute_Units_of_Measure: grams of water per grams of wet sediment Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: Dry Bulk Density (g/cm^3) Attribute_Definition: Dry bulk density of the sediment Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.41 Range_Domain_Maximum: 1.54 Attribute_Units_of_Measure: grams per cubic centimeter Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: Porosity Attribute_Definition: Porosity in each sample interval Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.38 Range_Domain_Maximum: 0.82 Attribute_Units_of_Measure: cubic centimeter of void space per cubic centimeter of wet sediment Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: Loss On Ignition (g-OM/g-dry) Attribute_Definition: The ratio of the mass of organic matter combusted at 550 Celsius to the pre-combusted mass of dry sediment Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.006 Range_Domain_Maximum: 0.156 Attribute_Units_of_Measure: grams of organic matter per grams of dry sediment Attribute_Measurement_Resolution: 0.001 Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Marci E. Marot Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: 502-8000 Contact_Electronic_Mail_Address: mmarot@usgs.gov Distribution_Liability: Although these data have been processed successfully on a computer system at the U.S. Geological Survey, no warranty expressed or implied is made regarding the display or utility of the data on any other system, nor shall the act of distribution imply any such warranty. The U.S. Geological Survey shall not be held liable for improper or incorrect use of the data described and (or) contained herein. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Standard_Order_Process: Fees: none Digital_Form: Digital_Transfer_Information: Format_Name: Zip archive Format_Version_Number: 1 Format_Specification: .zip Transfer_Size: 0.048 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://pubs.usgs.gov/ds/0993/downloads/14BRN_Physical_Data.zip Resource_Description: Downloadable data Custom_Order_Process: none Technical_Prerequisites: The spreadsheets included in this .zip file were created for use with Microsoft Excel 2010. They may also be viewed with the Microsoft Excel viewer or by downloading a Microsoft Compatibility Pack to view with older versions of Microsoft Excel. The .zip file also contains comma delimited files (.csv) of the physical parameter data for surface and subsurface sediments. The .csv data files contain the tabular data in plain text and may be viewed with a standard text editor. Metadata_Reference_Information: Metadata_Date: 20201013 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey St. Petersburg Coastal and Marine Science Center Contact_Person: Marci E. Marot Contact_Position: Geologist Contact_Address: Address_Type: Mailing and physical Address: 600 4th Street South City: St. Petersburg State_or_Province: FL Postal_Code: 33701 Country: U.S. Contact_Voice_Telephone: (727) 502-8000 Contact_Electronic_Mail_Address: mmarot@usgs.gov Metadata_Standard_Name: FGDC Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Access_Constraints: none Metadata_Security_Information: Metadata_Security_Classification_System: None Metadata_Security_Classification: Unclassified Metadata_Security_Handling_Description: None Metadata_Use_Constraints: Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the originator of the dataset.