Digital Shoreline Analysis System version 4.3 Transects with Short-Term End Point Rate Calculations for Florida north (FLnorth)

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:

What does this data set describe?

Title:
Digital Shoreline Analysis System version 4.3 Transects with Short-Term End Point Rate Calculations for Florida north (FLnorth)
Abstract:
Sandy ocean beaches are a popular recreational destination, often surrounded by communities containing valuable real estate. Development is on the rise despite the fact that coastal infrastructure is subjected to flooding and erosion. As a result, there is an increased demand for accurate information regarding past and present shoreline changes. To meet these national needs, the Coastal and Marine Geology Program of the U.S. Geological Survey (USGS) is compiling existing reliable historical shoreline data along open-ocean sandy shores of the conterminous United States and parts of Alaska and Hawaii under the National Assessment of Shoreline Change project. There is no widely accepted standard for analyzing shoreline change. Existing shoreline data measurements and rate calculation methods vary from study to study and prevent combining results into state-wide or regional assessments. The impetus behind the National Assessment project was to develop a standardized method of measuring changes in shoreline position that is consistent from coast to coast. The goal was to facilitate the process of periodically and systematically updating the results in an internally consistent manner.
  1. How might this data set be cited?
    U.S. Geological Survey, 2017, Digital Shoreline Analysis System version 4.3 Transects with Short-Term End Point Rate Calculations for Florida north (FLnorth): data release DOI:10.5066/F78P5XNK, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    Himmelstoss, E.A., Kratzmann, M.G., and Thieler, E.R., 2017, National Assessment of Shoreline Change— A GIS compilation of Updated Vector Shorelines and Associated Shoreline Change Data for the Gulf of Mexico Coast: data release DOI:10.5066/F78P5XNK, U.S. Geological Survey, Reston, VA.

    Online Links:

  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: -85.605075
    East_Bounding_Coordinate: -85.352180
    North_Bounding_Coordinate: 30.056938
    South_Bounding_Coordinate: 29.892376
  3. What does it look like?
  4. Does the data set describe conditions during a particular time period?
    Calendar_Date: 2017
    Currentness_Reference:
    publication date
  5. What is the general form of this data set?
    Geospatial_Data_Presentation_Form: vector digital data
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      This is a Vector data set. It contains the following vector data types (SDTS terminology):
      • String (138)
    2. What coordinate system is used to represent geographic features?
      Horizontal positions are specified in geographic coordinates, that is, latitude and longitude. Latitudes are given to the nearest 0.000001. Longitudes are given to the nearest 0.000001. Latitude and longitude values are specified in Decimal degrees. The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257224.
  7. How does the data set describe geographic features?
    FLnorth_STepr_rates
    Transects were automatically generated by DSAS at a 90 degree angle to the user-specified baseline using a smoothing algorithm to maintain roughly parallel transects that are orthogonal with respect to the baseline. (Source: U.S. Geological Survey)
    FID
    Internal feature number. (Source: Esri) Sequential unique whole numbers that are automatically generated.
    Shape
    Feature geometry. (Source: Esri) Coordinates defining the features.
    OBJECTID
    Internal feature number generated for each row of the transect attribute table when stored as a feature class in a geodatabase. This value is the common attribute field when joining to the TransectID value in short-term results output table calculated by DSAS. (Source: U.S. Geological Survey) Sequential unique whole numbers that are automatically generated.
    BaselineID
    Unique identification number of the baseline segment. If BaselineID=0 no transects will be generated. Used by DSAS to determine transect ordering alongshore if multiple baseline segments exist. (Source: U.S. Geological Survey)
    Range of values
    Minimum:1
    Maximum:unlimited
    TransOrder
    Assigned by DSAS based on ordering of transects along the baseline. Used to allow user to sort transect data along the baseline from baseline start to baseline end. (Source: U.S. Geological Survey)
    Range of values
    Minimum:0
    Maximum:unlimited
    ProcTime
    Assigned by DSAS automatically to record the date and time a transect was processed. (Source: U.S. Geological Survey)
    Range of values
    Minimum:no value or 0 (when transect was manually created by user)
    Maximum:unlimited (values based on time and date of automatic generation)
    Autogen
    Assigned by DSAS to indicate whether or not a transect was automatically created by DSAS (1= transect was auto generated by DSAS; blank or 0=transect was not auto-generated). (Source: U.S. Geological Survey)
    Range of values
    Minimum:blank or 0
    Maximum:1
    StartX
    Assigned by DSAS automatically to record the X coordinate of the beginning of the transect in meter units . If a transect position has been adjusted during the editing process, the coordinate in the attribute table is not updated automatically. This field was manually updated using Data East XTools v.10.2 to reflect the new position of any adjusted transects. (Source: U.S. Geological Survey) Values based on data set extent.
    StartY
    Assigned by DSAS automatically to record the Y coordinate of the beginning of the transect in meter units. If a transect position has been adjusted during the editing process, the coordinate in the attribute table is not updated automatically. This field was manually updated using Data East XTools v.10.2 to reflect the new position of any adjusted transects. (Source: U.S. Geological Survey) Values based on data set extent.
    EndX
    Assigned by DSAS automatically to record the X coordinate of the end of the transect in meter units. If a transect position has been adjusted during the editing process, the coordinate in the attribute table is not updated automatically. This field was manually updated using Data East XTools v.10.2 to reflect the new position of any adjusted transects. (Source: U.S. Geological Survey) Values based on data set extent.
    EndY
    Assigned by DSAS automatically to record the Y coordinate of the end of the transect in meter units. If a transect position has been adjusted during the editing process, the coordinate in the attribute table is not updated automatically. This field was manually updated using Data East XTools v.10.2 to reflect the new position of any adjusted transects. (Source: U.S. Geological Survey) Values based on data set extent.
    Azimuth
    Assigned by DSAS to record the azimuth of the transect measure in degrees clockwise from North. If a transect position has been adjusted during the editing process, the azimuth value in the attribute table is not updated automatically. This field was manually updated using ArcToolbox > Spatial Statistics Tools > Linear Directional Mean to reflect the new azimuth of any adjusted transects (lines were calculated individually). (Source: U.S. Geological Survey)
    Range of values
    Minimum:0
    Maximum:360
    Units:degrees
    SHAPE_Leng
    Length of feature in meter units (NAD 1983 State Plane Florida North FIPS 0903 (Meters)). (Source: Esri)
    Range of values
    Minimum:1199.999922
    Maximum:2131.396514
    Units:meters
    TransectId
    Same value as ObjectID. Used as a permanent and unique identification number for each transect in the output rates table calculated by DSAS. This attribute was used as the common field when joining the rates table (.dbf) to the transect feature class in a geodatabase. (Source: U.S. Geological Survey) Positive real numbers that are automatically generated.
    EPR
    The end point rate is calculated by dividing the distance of shoreline movement by the time elapsed between the two shorelines. The rate is reported in meters per year with positive values indicating accretion and negative values indicating erosion. (Source: U.S. Geological Survey)
    Range of values
    Minimum:-0.26
    Maximum:36.16
    Units:meters per year
    ECI
    Describes the uncertainty of the reported end point rate in meters. The shoreline uncertainties for the two positions used in the end point calculation are each squared, then added together (summation of squares). The square root of the summation of squares is divided by the number of years between the two shorelines. This result is reported as the confidence of the end point rate calculation (ECI). (Source: U.S. Geological Survey)
    Range of values
    Minimum:0.171
    Maximum:0.363
    Units:meters
    Entity_and_Attribute_Overview:
    The entity and attribute information provided here describes the tabular data associated with the dataset. Please review the individual attribute descriptions for detailed information. All calculations for length are in meter units and were based on the NAD 1983 State Plane Florida North FIPS 0903 (Meters) projection.
    Entity_and_Attribute_Detail_Citation: U.S. Geological Survey

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
    • U.S. Geological Survey
  2. Who also contributed to the data set?
  3. To whom should users address questions about the data?
    U.S. Geological Survey
    Attn: E.A. Himmelstoss
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 (voice)
    508-457-2310 (FAX)
    ehimmelstoss@usgs.gov

Why was the data set created?

This dataset consists of short-term (~30-year) end point shoreline change rates for the Florida north coastal region from Bald Point State Park to the Alabama border where fewer than three shoreline positions were available for the short-term time period (1960 and later). Rate calculations were computed within a GIS using the Digital Shoreline Analysis System (DSAS) version 4.3, an ArcGIS extension developed by the U.S. Geological Survey. The two shorelines must cover a distance greater than 1 kilometer to be included. A reference baseline was used as the originating point for the orthogonal transects cast by the DSAS software. The transects intersect each shoreline establishing measurement points, which are then used to calculate short-term rates.

How was the data set created?

  1. From what previous works were the data drawn?
  2. How were the data generated, processed, and modified?
    Date: 22-Mar-2013 (process 1 of 10)
    Transect features generated using DSAS v4.3 in ArcMap 10.0. Parameters Used: baseline layer=FLnorth_baseline, baseline group field=NULL, transect spacing=50 meters, transect length=1200 meters, cast direction=AUTO-DETECT, baseline location=offshore, cast method=smoothed, smoothing distance=2500 meters, flip baselines=not selected. For additional details on these parameters, please see the DSAS help file distributed with the DSAS software, or visit the website at: https://woodshole.er.usgs.gov/project-pages/DSAS/version4/ This process step and all subsequent process steps were performed by the same person: E.A. Himmelstoss. Person who carried out this activity:
    E.A. Himmelstoss
    U.S. Geological Survey
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2262 (voice)
    508-457-2310 (FAX)
    ehimmelstoss@usgs.gov
    Date: 22-Mar-2013 (process 2 of 10)
    Some transects were manually edited for length, moved, or deleted in an edit session using standard editing tools in ArcMap v10.0.
    Date: 17-Jun-2013 (process 3 of 10)
    Rate calculations performed in DSAS v4.3 using ArcMap v10.0 on selected shoreline features only (Select by Attributes, [Year]>=1960) with the following criteria: 1) they contained three or more shorelines required to compute short-term linear regression shoreline change analysis (a shoreline from the 1960s-70s, the modern (lidar-derived or 1990s) shoreline, and at least one other shoreline from the 1960s to present); 2) they contained the two minimum shorelines required to compute short-term end point shoreline change analysis (a shoreline from the 1960s-70s and the modern (lidar-derived or 1990s) shoreline). In FLnorth, the shoreline date range for short-term end point rates is 1976 to 1998. Shoreline uncertainty table added to ArcMap project (FLnorth_shorelines_uncertainty.dbf) and used by DSAS to apply bias-correction to distance measurements established by transects. Parameters Used: shoreline layer=FLnorth_shorelines, shoreline date field=Date_, shoreline uncertainty field name=Uncy, the default uncertainty=5.1 meters, shoreline intersection parameters=closest, stats calculations=[End Point Rate (EPR), Linear Regression Rate (LRR)], shoreline threshold=2, confidence interval=90%, Output rate table name=FLnorth_ST_rates_20130617_103201.
    Date: 17-Jun-2013 (process 4 of 10)
    Shoreline rates table (FLnorth_ST_rates_20130617_103201.dbf) was joined to the transect feature class in ArcMap v10.0 by right-clicking on the transect layer > joins and relates > join > join attributes from a table. Parameters: join field - ObjectID; table to join - FLnorth_ST_rates_20130617_103201; field in table: TransectID; join options - keep only matching records.
    Date: 17-Jun-2013 (process 5 of 10)
    Transects containing end point rates in the joined transect feature class were selected and exported to a shapefile (FLnorth_STepr_rates.shp) in ArcMap v10.0 by right-clicking the transect layer > data > export data, permanently linking the joined rate fields to the transect attribute table. Superfluous fields in the end point rates shapefile pertaining to the linear regression rate method were deleted.
    Date: 17-Jun-2013 (process 6 of 10)
    Any transects that did not cross the lidar shoreline were deleted using standard editing tools in ArcMap v10.0.
    Date: 17-Jun-2013 (process 7 of 10)
    The short-term end point rate transects were visually compared with the short-term linear regression rate transects in an ArcMap session. Each set of transects was assigned a different color and the short-term end point rate transects were manually deleted for any stretch of alongshore coast that had fewer than 90% coverage for a 1 kilometer stretch (18 or more transects out of 20 for 50-meter spacing). In other words there will only be 1 kilometer or larger spans of short-term rate calculations for a given rate metric (end point rate or linear regression rate).
    Date: 2015 (process 8 of 10)
    The exported transect shapefile was projected in Esri's ArcToolbox (v.10.0) > Data Management Tools > Projections and Transformations > Feature > Project. Parameters: input projection - NAD 1983 State Plane Florida North FIPS 0903 (Meters); output projection = geographic coordinates (WGS84); transformation = NAD_1983_To_WGS_1984_1.
    Date: 25-Aug-2017 (process 9 of 10)
    Keywords section of metadata optimized for discovery in USGS Coastal and Marine Geology Data Catalog. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Alan O. Allwardt
    Contractor -- Information Specialist
    2885 Mission Street
    Santa Cruz, CA

    831-460-7551 (voice)
    831-427-4748 (FAX)
    aallwardt@usgs.gov
    Date: 10-Aug-2020 (process 10 of 10)
    Added keywords section with USGS persistent identifier as theme keyword. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
  3. What similar or related data should the user be aware of?
    Morton, Robert A., Miller, Tara L., and Moore, Laura J., 2004, National Assessment of Shoreline Change: Part 1 Historical Shoreline Changes and Associated Coastal Land Loss along the U.S. Gulf of Mexico: Open-File Report 2004-1043, U.S. Geological Survey, Reston, VA.

    Online Links:

    Thieler, E.R., Himmelstoss, E.A., Zichichi, J.L., and Ergul, A., 2009, Digital Shoreline Analysis System (DSAS) version 4.0 - An ArcGIS extension for calculating shoreline change: Open-File Report 2008-1278, U.S. Geological Survey, Reston, VA.

    Online Links:

    Other_Citation_Details: Current version of software at time of use was 4.3
    Himmelstoss, E.A., Kratzmann, M.G., and Thieler, E.R., 2017, National Assessment of Shoreline Change: Summary Statistics for Updated Vector Shorelines and Associated Shoreline Change Data for the Gulf of Mexico and Southeast Atlantic Coasts: Open-File Report 2017-1015, U.S. Geological Survey, Reston, VA.

    Online Links:

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
    The attributes of this dataset are based on the field requirements of the Digital Shoreline Analysis System and were automatically generated by the software during the generation of the transect layer or during the calculation of shoreline change rates performed by the software.
  2. How accurate are the geographic locations?
  3. How accurate are the heights or depths?
  4. Where are the gaps in the data? What is missing?
    This dataset contains the transects automatically generated by the DSAS software application that were used to calculate end point short-term (~30-year) shoreline change rates for the region. Additional transects may have been generated but did not intersect the shoreline dates specified at the required alongshore threshold to calculate end point short-term rates.
  5. How consistent are the relationships among the observations, including topology?
    These data were generated using DSAS v4.3, an automated software program which does not perform checks for fidelity of the input features. The transects were visually inspected and sometimes manually adjusted within a standard ArcMap edit session to adjust the position at which an individual transect intersected the shorelines.

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints None
Use_Constraints Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the originator of the dataset.
  1. Who distributes the data set? (Distributor 1 of 1)
    U.S. Geological Survey
    Denver Federal Center
    Denver, CO
    USA

    1-888-275-8747 (voice)
    sciencebase@usgs.gov
  2. What's the catalog number I need to order this data set?
  3. What legal disclaimers am I supposed to read?
    Neither the U.S. Government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
  4. How can I download or order the data?
  5. What hardware or software do I need in order to use the data set?
    These data are available in a polyline shapefile format. The user must have software to read and process the data components of a shapefile.

Who wrote the metadata?

Dates:
Last modified: 19-Mar-2024
Metadata author:
E.A. Himmelstoss
U.S. Geological Survey
384 Woods Hole Road
Woods Hole, MA
USA

508-548-8700 x2262 (voice)
508-547-2310 (FAX)
whsc_data_contact@usgs.gov
Contact_Instructions:
The metadata contact email address is a generic address in the event the person is no longer with USGS. (updated on 20240319)
Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)
This page is <https://cmgds.marine.usgs.gov/catalog/whcmsc/SB_data_release/DR_F78P5XNK/FLnorth_STepr_rates.shp.faq.html>
Generated by mp version 2.9.51 on Wed Jun 26 15:25:01 2024