Metadata: Identification_Information: Citation: Citation_Information: Originator: Jin-Si R. Over Originator: Jennifer M. Cramer Publication_Date: 20241220 Title: Lidar point cloud, elevation models, GPS data, and imagery and orthomosaic from true-color aerial imagery, collected during UAS operations at Marsh Island, New Bedford, MA on April 9th, 2024 Edition: 1.0 Geospatial_Data_Presentation_Form: point cloud, raster, and tabular digital data Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P19TLXVG Publication_Information: Publication_Place: Woods Hole Coastal and Marine Science Center, Woods Hole, MA Publisher: U.S. Geological Survey, Coastal and Marine Hazards and Resources Program Online_Linkage: https://doi.org/10.5066/P19TLXVG Online_Linkage: https://www.sciencebase.gov/catalog/item/66a3d822d34ef465b8822170 Larger_Work_Citation: Citation_Information: Originator: Jin-Si R. Over Originator: Jennifer M. Cramer Originator: Sandra M. Brosnahan Originator: Seth D. Ackerman Originator: Neil Kamal Ganju Publication_Date: 2024 Title: Topographic, multispectral, and GPS data collected during uncrewed aircraft system (UAS) operations at Marsh Island, New Bedford, Massachusetts Edition: 1.0 Geospatial_Data_Presentation_Form: digital data Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P19TLXVG Publication_Information: Publication_Place: Reston, VA Publisher: U.S. Geological Survey Other_Citation_Details: Suggested citation: Over, J.R., Cramer, J.M., Brosnahan, S.M., Ackerman, S.D., and Ganju, N.K., 2024, Topographic, multispectral, and GPS data collected during uncrewed aircraft system (UAS) operations at Marsh Island, New Bedford, Massachusetts: U.S. Geological Survey data release, https://doi.org/10.5066/P19TLXVG. Online_Linkage: https://doi.org/10.5066/P19TLXVG Online_Linkage: https://www.sciencebase.gov/catalog/item/66a3d5f6d34ef465b8822149 Description: Abstract: Small Uncrewed Aircraft Systems (sUAS) were used to collect aerial remote sensing data over Marsh Island, a salt marsh restoration site along New Bedford Harbor, Massachusetts. Remediation of the site will involve direct hydrological and geochemical monitoring of the system alongside the UAS remote sensing data. On April 9th, 2024, USGS personnel collected natural (RGB) color images, Lidar, and ground control points. These data were processed to produce a high-resolution lidar point cloud (LPC), digital elevation models (surface and terrain), and a natural color orthomosaic. Data collection is related to USGS Field Activity 2024-004-FA and this release only provides the UAS portion. Purpose: The elevation and imagery products were produced to help the sites conservation partnership evaluate the baseline conditions of the site, with future data collections planned to monitor landscape change from remediation efforts and potential storm impacts. Supplemental_Information: For more information about the WHCMSC Field Activity, see https://cmgds.marine.usgs.gov/services/activity.php?fan=2024-004-FA. Images can be viewed or downloaded on the USGS Imagery Data System here https://doi.org/10.5066/P14MGKBY. Note that the bounding coordinates are for the entire area and not individual files. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20240409 Currentness_Reference: Ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: Not planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -70.91839811 East_Bounding_Coordinate: -70.91319555 North_Bounding_Coordinate: 41.65346253 South_Bounding_Coordinate: 41.64995665 Keywords: Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: U.S. Geological Survey Theme_Keyword: USGS Theme_Keyword: Coastal and Marine Hazards and Resources Program Theme_Keyword: CMHRP Theme_Keyword: Woods Hole Coastal and Marine Science Center Theme_Keyword: WHCMSC Theme_Keyword: YellowScan Mapper Plus Theme_Keyword: DJI Matrice 600 Theme_Keyword: Bare Earth Theme_Keyword: Point Cloud Theme_Keyword: UAS Theme_Keyword: AeroPoints Theme_Keyword: orthomosaics Theme_Keyword: Aerial Imaging and Mapping Group Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: remote sensing Theme_Keyword: digital elevation models Theme_Keyword: structure from motion Theme_Keyword: image mosaics Theme_Keyword: geospatial datasets Theme_Keyword: image collections Theme: Theme_Keyword_Thesaurus: Data Categories for Marine Planning Theme_Keyword: Physical Habitats and Geomorphology Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: geoscientificInformation Theme_Keyword: elevation Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:66a3d822d34ef465b8822170 Place: Place_Keyword_Thesaurus: Geographic Names Information System (GNIS) Place_Keyword: Atlantic Ocean Place_Keyword: Commonwealth of Massachusetts Place_Keyword: New Bedford (613714) Access_Constraints: None Use_Constraints: Public domain (CC0-1.0) data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey (USGS) as the source of this information. These data are not intended for navigational use. Point_of_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jin-Si R. Over Contact_Organization: U.S. Geological Survey, Northeast Region, Woods Hole Coastal and Marine Science Center Contact_Position: Geographer Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2297 Contact_Electronic_Mail_Address: jover@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: https://www.sciencebase.gov/catalog/file/get/66a3d822d34ef465b8822170?name=2024004FA_MI_Apr_data_browse.jpg&allowOpen=true Browse_Graphic_File_Description: Data and products of Marsh Island: RGB image, lidar point cloud, ortho, and DEM. Browse_Graphic_File_Type: JPEG Native_Data_Set_Environment: Agisoft Metashape Pro v. 2.0.1, Emlid Studio v. 1.8, Trimble PosPac UAV v. 9.0, YellowScan CloudStation v. 2405.0.0, Global Mapper Pro v. 26.0 Cross_Reference: Citation_Information: Originator: Jin-Si R. Over Originator: Andrew C. Ritchie Originator: Christine J. Kranenburg Originator: Jenna A. Brown Originator: Daniel D. Buscombe Originator: Tom Noble Originator: Christopher R. Sherwood Originator: Jonathan A. Warrick Originator: Phillipe A. Wernette Publication_Date: 2021 Title: Processing coastal imagery with Agisoft Metashape Professional Edition, version 1.6-Structure from motion workflow documentation Series_Information: Series_Name: Open-File Report Issue_Identification: 2021-1039 Publication_Information: Publication_Place: Reston, VA Publisher: U.S. Geological Survey Other_Citation_Details: This publication includes the general methodology for processing imagery in Metashape to produce digital surface models and ortho products. Online_Linkage: https://doi.org/10.3133/ofr20211039 Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: The horizontal and vertical accuracy of the products (2024004FA_MI_Apr_YSMP_LPC.laz, 2024004FA_MI_Apr_YSMP_DSM_5cm.tif, 2024004FA_MI_Apr_YSMP_DTM_5cm.tif, 2024004FA_MI_Apr_YSMP_RGBavg_5cm.tif) were assessed using the AeroPoint ground control points (GCPs). It should also be noted that accuracy estimates of the products are for areas of bare ground or low vegetation where GCPs were placed. Additional sources of error, such as moving objects, may cause accuracy estimates to exceed estimates in localized portions of the products. Lidar and lidar products do not have data where water was present. The accuracy of the lidar classification that produced the digital terrain model (DTM) was not assessed, users are advised to do their own quality control. Misclassification may cause additional gaps in the DTM. Logical_Consistency_Report: There was one M600 UAS flight and five AeroPoint GCPs. The flight (17 min) used the YellowScan Mapper+ (YSMP) to collect lidar data and RGB images and produced the lidar point cloud (LPC), digital terrain model (DTM), digital surface model (DSM), and the true-color (RGBavg) orthomosaic. All data fall into expected elevation ranges of a low-lying coastal marsh. Completeness_Report: Imagery: The YSMP camera triggered every 2 seconds once it reached 45 meters altitude. Images at take-off and landing were removed. All of these removed images can account for the non-consecutive original file names and results in a total of 347 YSMP images. Products: GeoTIFF products are cloud-optimized and deflate compressed. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: The lidar point cloud, and by association the DSM and DTM, horizontal accuracy was assessed against positions of the AeroPoints and tarps. The horizontal accuracy is variable; based on intensity the AeroPoint centers are on average 20 cm from the known position and based on the RGB colorization, the centers are on average 6 cm from the known positions. It is recommended that users do their own assessment for their own needs. The orthomosaic was spatially georeferenced using AeroPoints and created using photogrammetry. The five GCPs were used as control points during Structure from motion (SfM) photogrammetry processing, where the horizontal root mean square error (RMSE) of the GCPs as reported from the Metashape project are xy 0.012/0.013 m. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: The YSMP images were geotagged with the post-processed lidar T04 file and base station data and have an average z accuracy of 0.02 m. The lidar point cloud was assessed against the USGS 3DEP surface on stable surfaces and fall within 10 cm. The lidar based digital surface model was assessed against the elevations of the AeroPoints, and the RMSE (n=5) was 0.05 m. The lidar based DTM was not vertically assessed due to the subjectivity of the classification. The orthomosaic does not have a vertical component. Lineage: Process_Step: Process_Description: GROUND CONTROL: Five AeroPoint GCPs on top of larger black and white reflective tarps were spaced out over the field site and left on for at least two hours to collect GNSS data. After collection and connected to Wifi, the AeroPoint data were uploaded and run through a post-processing kinematic algorithm of the CORS network to get a global accuracy. Internal accuracy is reported in xyz variance and with a baseline distance. The data were exported in the horizontal datum NAD83(2011) to produce latitude, longitude, and ellipsoid heights, and then UTM19N and vertical datum NAVD88 using Geoid 18 was used to produce easting and northing and orthometric heights. These were exported to a CSV file and named 2024004FA_MI_Apr_AeroPoints.csv. Process_Date: 20240409 Process_Step: Process_Description: UAS FLIGHTS: The lidar sensor is a 905 nm wavelength Livox Avia with a 70.4/ 4.5 degree horizontal and vertical field of view (FOV). The lidar scanner was set to the non-repetitive scan pattern, which moves the sensor in spirograph (flower) motion and is optimal for vegetated areas as it can capture more angles by surveying in front and behind the sensor. The camera module is a SONY UMC - 10RC, a 20.4 megapixel (MP). The system also consists of a Trimble AV18 GNSS antenna mounted to the top of the UAS and connected to the lidar system via GNSS cable. The lidar data is saved to a 256 GB USB thumb drive in three different files: (1) the IMU+GPS data, decimated for quick post-processing, in binary *.ys format, (2) the scanner data in *.lvx format (~600 MB per minute of data collection), (3) and the complete IMU+GPS data in Applanix (Trimble) binary *.t04 format. The RGB images are saved to a 64 GB micro SD card as *.jpeg files. A configuration text file (CONFIG.TXT) is pre-loaded onto the USB thumb drive and can be edited to control lidar and camera module settings, including the camera triggering height, the camera triggering interval, and the lidar scan pattern. The YSMP was attached to a DJI Matrice 600 Pro UAS with approved government edition firmware. The YSMP lidar data was collected with the UAS flying at 10 m/s at 80 meters above ground level with north-south and east-west transect passes. The scan method was set to repetitive. The camera module was set to take images every 2 seconds after reaching 45 meters altitude. After the flight the lidar data were taken off the sensor. Note, the geotagged positions embedded in the exif information are WGS84 and ellipsoid height, this is how the data are collected. The positions have been converted to NAD83(2011) and NAVD88 geoid 18 in the imagery locations file (2024004FA_MI_Apr_ImageryLocations.csv) and this is accounted for when transforming to NAD83(2011)/UTM19N and NAVD88 Geoid 18 in the products. Process_Date: 20240409 Process_Step: Process_Description: LIDAR DATA: The YSMP lidar data were processed in YellowScan CloudStation software integrated with Trimble POSPac UAV 9.0. Base station GNSS data were downloaded from the SP80 collecting data on site for the time the UAS was flying. Raw scanner data (.ys file) was imported into YellowScan CloudStation, the sensor Lidar (.profile) and Camera (.camera) profiles, provided by the vendor, were selected for the project and the project coordinate reference system is set. CloudStation flight trajectories are adjusted manually to select the desired data to be processed. The .T04 file and base station GNSS rinex file were used to correct and optimize the sensor position trajectories and produce a Smoothed Best Estimate of Trajectory (SBET) file in .txt ASCII format, which represents the Post Processing Kinematic (PPK) Solution. The lever arm offsets and boresight angle corrections were applied to the LPC, along with a strip adjustment between transect swaths using CloudStation's "robust" setting. The LPC was then classified in CloudStation using a bare-ground classification scheme (0-Created, never classified; 2-Ground) with the settings Object inner size = 55 m, Steepness = 0.05 m, minimal object height = 0.50 m, and a point cloud thickness of 0.15 m. The LPC was colored by the YSMP camera based on the photo timestamp. The classified LPC is used to export a DTM of the mean values of just the classified ground points (2024004FA_MI_Apr_YSMP_DTM_5cm.tif). The classification is then cleared in Global Mapper (v 26.0) so all points are unclassified. Points are also deleted in Global Mapper that are interpreted to be noise or are above a reasonable elevation threshold based on the surrounding features. The clean LPC is exported as a zipped laz file (v 1.4) (2024004FA_MI_Apr_YSMP_LPC.laz). A DSM using maximum values of all points is exported (2024004FA_MI_Apr_YSMP_DSM_5cm.tif). All files were exported in EPSG:6348 (NAD83(2011)/UTM zone 19N and the vertical datum in EPSG:5703 (NAVD88 height in meters). Process_Date: 20240720 Process_Step: Process_Description: RAW IMAGERY: The YSMP images were geotagged in Emlid Studio using the lidar .T04 file and MADA (https://geodesy.noaa.gov/CORS/ncn_station_pages/index.html?stationID=MADA) base rinex files from the time the UAS was in the air. The YSMP images were processed to add additional information required by the USGS to the EXIF headers using ExifTools (https://exiftool.org/, version: 12.06), and the files were renamed to a unique identifier using Namexif (http://www.digicamsoft.com/softnamexif.html, version 2.1) to avoid any possibility of duplicate names. These steps are described here. 1. ExifTools was used to tag each photo headers following the Imagery Data System EXIF Guidance. Attributes (e.g. Credit, Copyright, UsageTerms, ImageDescription, Artist, etc) were stored in a csv file and written to each image with the command:' exiftool -csv="C:\directory\name\EXIF.csv" C:\directory\name\of\photos *.JPG ' To read out the photo information to a csv when in the directory with the photos the command is: exiftool -csv *.JPG > directory/name/allheaders_out.csv 2. All the images were renamed with Namexif (https://us.digicamsoft.com/softnamexif.html v 2.2 accessed April 2020) to ensure unique filenames and compliance with the USGS Coastal and Marine Hazards and Resources Program's best practices for image naming convention. Images were renamed with the field survey ID prefix; flight number, and ID that distinguishes USGS cameras by make/camera number, the image acquisition date, coordinated universal time (UTC) in ISO8601 format, and a suffix with the original image name. For example, image name '2024004FA_f01YSMP_20240409T165822Z_DSC####', 2024004FA is the field activity ID, f01 is the flight number, YSMP is the camera on the YellowScan Mapper Plus, 20240409 is the UTC date in the format YYYYMMDD, and a 'T' is used to separate UTC date from UTC time in format HHMMSS followed by a Z. The DSC#### is the original raw photo name appended to the end of the new filename. Process_Date: 20240720 Process_Step: Process_Description: PHOTOGRAMMETRY: The ortho product was created in Agisoft Metashape v. 2.0.1 using the following general steps (see Over and others, 2021 for a more detailed SfM methodology explanation): 1. A project was created in Metashape and imagery was imported. 2. Photos were aligned at a low accuracy and then GCPs were automatically detected in the point cloud. GCP positions (2024004FA_MI_Apr_AeroPoints.csv) were added to the project in the reference systems NAD83(2011)/UTM Zone 19N and NAVD88 (geoid 18). The horizontal and vertical accuracies for the GCPs were set to 0.01/0.02 m, respectively, and the camera positions for the images were turned off. The photos were then re-aligned with high accuracy (the pixels were not subsampled) using a keypoint limit of 60,000 and unlimited tie points. 3. The alignment process matched pixels between images, which created a sparse point cloud and put the imagery into a relative spatial context using the GCPs. The resultant point cloud was filtered using one iteration of the 'Reconstruction uncertainty' filter at a level of 13, one iteration of the 'Projection accuracy' filter at a level of 3, and three iterations of the 'Reprojection accuracy' filter to get to a level of 1. With each filter, iteration points are selected, deleted, and then the camera model was optimized to refine the focal length, cx, cy, k1, k2, k3, p1, and p2 camera model coefficients. 4. A high-quality dense cloud with a low-frequency filtering algorithm was made from the filtered spare point cloud. The dense point cloud was then edited by visual inspection and Metashape’s confidence filter to remove points with a low confidence near the edges and near water bodies. 5. An interpolated elevation model is built from the dense point cloud and then an orthomosaic is built from the DSM with refined seamlines. The YSMP orthomosaic is a 3-band RGB-averaged orthomosaic exported at 5 cm resolution (2024004FA_MI_Apr_RGBavg_5cm.tif). Process_Date: 20240806 Process_Step: Process_Description: CLOUD OPTIMIZATION: All geoTIFF products were DEFLATE compressed and turned into a cloud-optimized GeoTIFFs (COG) using gdal_translate with the following command: for %i in (.\*.tif) do gdal_translate %i .\cog\%~ni_cog.tif -of COG -stats -co BLOCKSIZE=256 -co COMPRESS=DEFLATE -co PREDICTOR=YES -co NUM_THREADS=ALL_CPUS -co BIGTIFF=YES (v. 3.1.4 accessed October 20, 2020 https://gdal.org/). Where i is the name of each geoTIFF section. Process_Date: 20240806 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jin-Si R. Over Contact_Organization: U.S. Geological Survey, Woods Hole Coastal and Marine Science Center Contact_Position: Geographer Contact_Address: Address_Type: mailing and physical address Address: U.S. Geological Survey Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2297 Contact_Electronic_Mail_Address: jover@usgs.gov Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 19 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.999600 Longitude_of_Central_Meridian: -69.000000 Latitude_of_Projection_Origin: 0.000000 False_Easting: 500000.000000 False_Northing: 0.000000 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: row and column Coordinate_Representation: Abscissa_Resolution: 0.001 Ordinate_Resolution: 0.001 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 (National Spatial Reference System 2011) Ellipsoid_Name: GRS_1980 Semi-major_Axis: 6378137.0 Denominator_of_Flattening_Ratio: 298.257222101 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Datum_Name: North American Vertical Datum of 1988 Altitude_Resolution: 0.001 Altitude_Distance_Units: meters Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: 2024004FA_MI_Apr_ImageryLocations.csv Entity_Type_Definition: The CSV file contains the approximate position of the YSMP images at the moment of each capture. Note that the positions for each of the six band images is the same, so only the information for one band is provided. Entity_Type_Definition_Source: producer defined Attribute: Attribute_Label: ImageName Attribute_Definition: File names of individual images, see the Process Description for file naming convention. Attribute_Definition_Source: USGS Attribute_Domain_Values: Unrepresentable_Domain: Character string. Attribute: Attribute_Label: GPSDateTime Attribute_Definition: Date and UTC time in YYYY:MM:DD HH:MM:ssZ where Z is for zulu time. Attribute_Definition_Source: Processor defined Attribute_Domain_Values: Unrepresentable_Domain: Character string. Attribute: Attribute_Label: Latitude NAD83[2011] Attribute_Definition: Latitude (x) of UAS based on time of each image capture. Positive values represent North coordinates. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 41.6506972 Range_Domain_Maximum: 41.6533278 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Longitude NAD83[2011] Attribute_Definition: Longitude (y) of UAS based on time of each image capture. Negative values represent West coordinates. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -70.9186417 Range_Domain_Maximum: -70.9133889 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Altitude NAVD88 Attribute_Definition: Altitude of the UAS position at the time of each image capture. Attribute_Definition_Source: None Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 65.283 Range_Domain_Maximum: 85.150 Attribute_Units_of_Measure: meters Detailed_Description: Entity_Type: Entity_Type_Label: 2024004FA_MI_Apr_AeroPoints.csv Entity_Type_Definition: Ground control point positions, elevations, and attributes Entity_Type_Definition_Source: USGS Attribute: Attribute_Label: FAN Attribute_Definition: USGS Field Activity Number Attribute_Definition_Source: USGS Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 2024-004-FA Enumerated_Domain_Value_Definition: Year, USGS ID, and Field Activity Enumerated_Domain_Value_Definition_Source: USGS Attribute: Attribute_Label: Date Attribute_Definition: Calendar date of collection Attribute_Definition_Source: USGS Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 20240409 Enumerated_Domain_Value_Definition: YYYYMMDD Enumerated_Domain_Value_Definition_Source: USGS Attribute: Attribute_Label: Point ID Attribute_Definition: Unique point identification number. Attribute_Definition_Source: Processor defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1 Range_Domain_Maximum: 5 Attribute: Attribute_Label: Attributes Attribute_Definition: Unique identifier for ground control points. Prefix AP-### refers to AeroPoint and the last 3 digits of its identifying code. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Unrepresentable_Domain: Character string. Attribute: Attribute_Label: Latitude NAD83[2011] Attribute_Definition: Post-processed latitude of AeroPoint position (NAD83[2011]). Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 41.65109014 Range_Domain_Maximum: 41.65255740 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Longitude NAD83[2011] Attribute_Definition: Post-processed longitude of AeroPoint position (NAD83[2011]). Attribute_Definition_Source: None Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -70.91769361 Range_Domain_Maximum: -70.91418832 Attribute_Units_of_Measure: decimal degrees Attribute: Attribute_Label: Ellipsoid NAD83[2011] Attribute_Definition: Post-processed height in meters of AeroPoint in relation to the NAD83(2011) reference ellipsoid. Attribute_Definition_Source: None Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -28.148 Range_Domain_Maximum: -26.799 Attribute_Units_of_Measure: meters Attribute: Attribute_Label: Northing 19N Attribute_Definition: Post-processed interpolated X-coordinate of AeroPoint in NAD83(2011)/UTM Zone 19N. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4612812.888 Range_Domain_Maximum: 4612971.153 Attribute_Units_of_Measure: meters Attribute: Attribute_Label: Easting 19N Attribute_Definition: Post-processed interpolated Y-coordinate of AeroPoint in NAD83(2011)/UTM Zone 19N. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 340314.284 Range_Domain_Maximum: 340608.531 Attribute_Units_of_Measure: meters Attribute: Attribute_Label: Orthometric NAVD88 Attribute_Definition: Post-processed Z-coordinate of AeroPoint using NAVD88 with Geoid 18 applied. Attribute_Definition_Source: USGS Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.020 Range_Domain_Maximum: 2.369 Attribute_Units_of_Measure: meters Attribute: Attribute_Label: Xvar mm Attribute_Definition: Variance in the X-coordinate from post-processing Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.8 Range_Domain_Maximum: 4.5 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Yvar mm Attribute_Definition: Variance in the Y-coordinate from post-processing Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.4 Range_Domain_Maximum: 7.9 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Zvar mm Attribute_Definition: Variance in the Z-coordinate from post-processing Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 1.8 Range_Domain_Maximum: 6.2 Attribute_Units_of_Measure: millimeters Attribute: Attribute_Label: Baseline distance km Attribute_Definition: distance of AeroPoint from nearest used processing network base station Attribute_Definition_Source: Propeller Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.12 Range_Domain_Maximum: 9.57 Attribute_Units_of_Measure: kilometers Detailed_Description: Entity_Type: Entity_Type_Label: 2024004FA_MI_Apr_YSMP_LPC.laz Entity_Type_Definition: UAS lidar point cloud in .LAZ file format. This georeferenced point cloud was colorized using natural color RGB image values and is not classified. Total point count is 102,276,608, point density is 1200.4 points per square meter, and point spacing is 0.029 m. Entity_Type_Definition_Source: producer defined Attribute: Attribute_Label: Elevation Attribute_Definition: Surface elevation orthometric height NAVD88 (m) using Geoid 18 in NAD83(2011)/UTM Zone 19N. Attribute_Definition_Source: YellowScan CloudStation Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.791 Range_Domain_Maximum: 26.146 Attribute_Units_of_Measure: meters Attribute: Attribute_Label: Intensity Attribute_Definition: Lidar intensity is recorded as the return strength of a laser beam during data collection. Attribute_Definition_Source: YellowScan CloudStation Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 65,025 Detailed_Description: Entity_Type: Entity_Type_Label: 2024004FA_MI_Apr_YSMP_DSM_5cm.tif Entity_Type_Definition: A cloud-optimized digital surface model created from the lidar point cloud with encoded elevation values. Pixel resolution is 5 cm. Entity_Type_Definition_Source: USGS Attribute: Attribute_Label: Value Attribute_Definition: Surface elevation orthometric height NAVD88 (m) using Geoid 2018 in NAD83(2011) UTM Zone 19N. No-data value is –3.4028e+38. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.791 Range_Domain_Maximum: 26.146 Attribute_Units_of_Measure: meters Detailed_Description: Entity_Type: Entity_Type_Label: 2024004FA_MI_Apr_YSMP_DTM_5cm.tif Entity_Type_Definition: A cloud-optimized digital surface model created from the ground points of the classified lidar point cloud with encoded elevation values. Pixel resolution is 5 cm. No-data value is –3.4028e+38. Entity_Type_Definition_Source: USGS Attribute: Attribute_Label: Value Attribute_Definition: Surface elevation orthometric height NAVD88 (m) using Geoid 2018 in NAD83(2011) UTM Zone 19N. Attribute_Definition_Source: producer defined Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.791 Range_Domain_Maximum: 14.264 Attribute_Units_of_Measure: meters Detailed_Description: Entity_Type: Entity_Type_Label: 2024004FA_MI_Apr_YSMP_RGBavg_Ortho_5cm.tif Entity_Type_Definition: True-color (RGB) cloud optimized GeoTIFF of Marsh Island. Entity_Type_Definition_Source: USGS Attribute: Attribute_Label: Band_1 Attribute_Definition: Red wavelength band Attribute_Definition_Source: Agisoft Metashape Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 255 Attribute: Attribute_Label: Band_2 Attribute_Definition: Green wavelength band Attribute_Definition_Source: Agisoft Metashape Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 255 Attribute: Attribute_Label: Band_3 Attribute_Definition: Blue wavelength band Attribute_Definition_Source: Agisoft Metashape Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 255 Overview_Description: Entity_and_Attribute_Overview: The filenames are formatted as "2024004FA_MI_Apr_sensor/product_ resolution.*** ", where 2024004 is the USGS Field activity ID, location is Marsh Island (MI), Apr is the month, sensor is YellowScan Mapper Plus (YSMP), AeroPoints and products include orthomosaics (ortho), digital surface and terrain models (DSM and DTM), and lidar point cloud (LPC). The horizontal coordinate reference system for all products is NAD83(2011)/UTM19N, the vertical coordinate reference system (VCRS) is NAVD88. Entity_and_Attribute_Detail_Citation: USGS Field Activity 2024-004-FA Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey - ScienceBase Contact_Address: Address_Type: mailing and physical address Address: Denver Federal Center, Building 810, Mail Stop 302 City: Denver State_or_Province: CO Postal_Code: 80225 Contact_Voice_Telephone: 1-888-275-8747 Contact_Electronic_Mail_Address: sciencebase@usgs.gov Resource_Description: Aerial imaging and mapping of Marsh Island includes the YellowScan Mapper Plus lidar point cloud, elevation models, imagery and true-color orthomosaic, and AeroPoint ground control points. Distribution_Liability: Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data for other purposes, nor on all computer systems, nor shall the act of distribution constitute any such warranty. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Not for navigational use. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: GeoTIFF Format_Version_Number: 1.0.0 Format_Specification: Cloud optimized GeoTIFF format Adobe deflate compressed Format_Information_Content: 2024004FA_MI_Apr_YSMP_DSM_5cm.tif (178 MB) and 2024004FA_MI_Apr_YSMP_DTM_5cm.tif (169 MB) have encoded surface elevations and 2024004FA_MI_Apr_YSMP_RGBavg_Ortho_5cm.tif (124 MB) is an orthomosaic. Transfer_Size: 472 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/item/66a3d822d34ef465b8822170 Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/66a3d822d34ef465b8822170 Network_Resource_Name: https://doi.org/10.5066/P19TLXVG Access_Instructions: The first link in the list above is to the child page where files can be downloaded individually, the second link is to directly download all the data on the page, and third link is to the doi to the main publication. Digital_Form: Digital_Transfer_Information: Format_Name: CSV Format_Version_Number: Exported from Excel Office 365 16.01 Format_Information_Content: The CSV file 2024004FA_MI_Apr_AeroPoints.csv contains ground control data and 2024004FA_MI_Apr_ImageryLocations contains a list of the images and their positions. Transfer_Size: 0.1 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/item/66a3d822d34ef465b8822170 Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/66a3d822d34ef465b8822170 Network_Resource_Name: https://doi.org/10.5066/P19TLXVG Access_Instructions: The first link in the list above is to the child page where files can be downloaded individually, the second link is to directly download all the data on the page, and third link is to the doi to the main publication. Digital_Form: Digital_Transfer_Information: Format_Name: JPEG Format_Version_Number: 1.0.0 Format_Information_Content: The YSMP images. Transfer_Size: 2750 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/item/66a3d822d34ef465b8822170 Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/66a3d822d34ef465b8822170 Network_Resource_Name: https://doi.org/10.5066/P14MGKBY Network_Resource_Name: https://doi.org/10.5066/P19TLXVG Access_Instructions: The first link in the list above is to the child page where files can be downloaded individually, the second link is to directly download all the data on the page, and the third link is to the Imagery Data System where the photos can be viewed and downloaded individually (filter by FA, date, and sensor type), and the fourth link is to the doi to the main publication. Transfer size refers to the total size of all images if downloaded from the IDS, images are not hosted on sciencebase. Digital_Form: Digital_Transfer_Information: Format_Name: LAZ Format_Version_Number: 1.4 Format_Information_Content: LAZ (LAserZipped) is an open file format intended for point data records. File_Decompression_Technique: Use laszip to decompress Transfer_Size: 1160 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://www.sciencebase.gov/catalog/item/66a3d822d34ef465b8822170 Network_Resource_Name: https://www.sciencebase.gov/catalog/file/get/66a3d822d34ef465b8822170 Network_Resource_Name: https://doi.org/10.5066/P19TLXVG Access_Instructions: The first link in the list above is to the child page where files can be downloaded individually, the second link is to directly download all the data on the page, and third link is to the doi to the main publication. Fees: None. Metadata_Reference_Information: Metadata_Date: 20241220 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jin-Si R. Over Contact_Organization: U.S. Geological Survey, Northeast Region Contact_Position: Geographer Contact_Address: Address_Type: mailing and physical Address: U.S. Geological Survey Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2297 Contact_Electronic_Mail_Address: whsc_data_contact@usgs.gov Contact_Instructions: The metadata contact email address is a generic address in the event the person is no longer with USGS. Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Access_Constraints: None Metadata_Use_Constraints: None