Unvegetated to vegetated ratio of marsh units in north shore Long Island salt marsh complex, New York

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:

What does this data set describe?

Title:
Unvegetated to vegetated ratio of marsh units in north shore Long Island salt marsh complex, New York
Abstract:
This data release contains coastal wetland synthesis products for the geographic region of north shore Long Island, New York. Metrics for resiliency, including unvegetated to vegetated ratio (UVVR), marsh elevation, and mean tidal range, are calculated for smaller units delineated from a Digital Elevation Model, providing the spatial variability of physical factors that influence wetland health. Through scientific efforts initiated with the Hurricane Sandy Science Plan, the U.S. Geological Survey has been expanding national assessment of coastal change hazards and forecast products to coastal wetlands with the intent of providing Federal, State, and local managers with tools to estimate the vulnerability and ecosystem service potential of these wetlands. For this purpose, the response and resilience of coastal wetlands to physical factors need to be assessed in terms of the ensuing change to their vulnerability and ecosystem services.
  1. How might this data set be cited?
    Welk, Robert, Defne, Zafer, and Ganju, Neil, 20200602, Unvegetated to vegetated ratio of marsh units in north shore Long Island salt marsh complex, New York: data release DOI:10.5066/P9UNOMM8, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    Welk, Robert, Defne, Zafer, and Ganju, Neil, 2020, Coastal wetlands of north shore Long Island, New York: data release DOI:10.5066/P9UNOMM8, U.S. Geological Survey, Reston, VA.

    Online Links:

    Other_Citation_Details:
    Suggested citation: Welk, R., Defne, Z., and Ganju, N.K., 2020, Coastal wetlands of north shore Long Island, New York: U.S. Geological Survey data release, https://doi.org/10.5066/P9UNOMM8
  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: -73.7523079
    East_Bounding_Coordinate: -72.7695214
    North_Bounding_Coordinate: 40.9750166
    South_Bounding_Coordinate: 40.7771079
  3. What does it look like?
    https://www.sciencebase.gov/catalog/file/get/5e84de2be4b01d50927b7164?name=UVVR_NSLI_browse.png (PNG)
    Graphic that shows UVVR overlaying Esri basemap.
  4. Does the data set describe conditions during a particular time period?
    Calendar_Date: 2020
    Currentness_Reference:
    publication date
  5. What is the general form of this data set?
    Geospatial_Data_Presentation_Form: Vector Digital dataset (Polygon)
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      This is a Vector data set. It contains the following vector data types (SDTS terminology):
      • G-polygon (1385)
    2. What coordinate system is used to represent geographic features?
      The map projection used is WGS 1984 Web Mercator Auxiliary Sphere (Esri Full Name: WGS_1984_Web_Mercator_Auxiliary_Sphere).
      Projection parameters:
      Standard_Parallel: 0.0
      Longitude_of_Central_Meridian: 0.0
      False_Easting: 0.0
      False_Northing: 0.0
      Planar coordinates are encoded using coordinate pair
      Abscissae (x-coordinates) are specified to the nearest 0.6096
      Ordinates (y-coordinates) are specified to the nearest 0.6096
      Planar coordinates are specified in Meter
      The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.0.
      The flattening of the ellipsoid used is 1/298.257223563.
  7. How does the data set describe geographic features?
    mu_UVVR_NSLI
    Table containing attribute information associated with the dataset. (Source: U.S. Geological Survey)
    FID
    Internal feature number. (Source: Esri) Unique whole numbers that are automatically generated.
    Shape
    Feature geometry. (Source: Esri) Coordinates defining the features.
    FID_CMU
    Unique whole number that represents the identification number for each conceptual marsh unit. (Source: USGS)
    Range of values
    Minimum:37
    Maximum:1778
    Units:none
    ATOT_M2
    Total surface area of a marsh unit in square meters (Source: USGS)
    Range of values
    Minimum:9.04854
    Maximum:219320.976263
    Units:square meters
    AVEG_M2
    Surface area of vegetated part of a marsh unit in square meters. Value is set to -9999 if there is no vegetated area in the marsh unit. (Source: USGS)
    Range of values
    Minimum:-9999
    Maximum:185492.964019
    Units:square meters
    UVVR
    Ratio of unvegetated surface area to vegetated surface area. Ordinarily, UVVR ranges from zero (completely vegetated) to infinity (completely unvegetated). However, it is assigned the value of -1 when completely unvegetated. (Source: USGS)
    Range of values
    Minimum:0
    Maximum:629.676391
    Units:none
    FLG
    Marsh unit flag indicating anomalous marsh units based on elevation, surface area, and absence of vegetation. FLG values indicate: (-1) no vegetated area in the marsh unit; (-10) marsh unit elevation higher than the 99.8 percentile; (-100) marsh unit elevation less than 0.2 percentile; (-200) greater than 25% of marsh unit has hydroflattened area (and has -9999 as its elevation value); (-1000) marsh unit surface area less than 900 m^2; (-10000) mean tidal range of marsh unit is extrapolated; and (0) no flag. Combination of negative values indicate combination of flags. For example, -1001 indicates no vegetated area and area less than 900 m^2. (Source: USGS)
    Range of values
    Minimum:-11201
    Maximum:0
    Units:None
    Entity_and_Attribute_Overview:
    In this dataset, the salt marsh complex on north shore Long Island has been delineated to conceptual salt marsh units to facilitate unit by unit evaluation of response and resiliency of the marsh system to physical and biogeochemical drivers. Each unit is also analyzed based on the vegetated and unvegetated surface area coverage, the ratio of which can be an independent measure of marsh health for microtidal marshes on the Atlantic and Pacific coasts of the United States. UVVR is calculated as the ratio of unvegetated area to vegetated area in a marsh unit. Decimal values in the attribute table are a result of double precision calculations while significant digits are considered in defining the attribute measurement resolutions. Therefore, the smallest unit increment for area values and UVVR is assumed to be 1 meter and a 0.001, respectively.
    Entity_and_Attribute_Detail_Citation: USGS

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
    • Robert Welk
    • Zafer Defne
    • Neil Ganju
  2. Who also contributed to the data set?
  3. To whom should users address questions about the data?
    U.S. Geological Survey
    Attn: Robert Welk
    Hydrologic Technician
    2045 NY 112
    Coram, NY

    631-736-0783 x141 (voice)
    rwelk@usgs.gov

Why was the data set created?

The purpose of this shapefile is to calculate the ratio of unvegetated area to vegetated area (UVVR) in each marsh unit. Analysis of unvegetated to vegetated marsh ratio is part of a comprehensive assessment to identify the factors and their weights in determining the vulnerability and resiliency of salt marshes. An unvegetated area to vegetated area ratio was defined as a potential indicator of the current state of a salt marsh unit. UVVR was calculated based on U.S. Department of Agriculture National Agriculture Imagery Program (NAIP) 1-meter resolution imagery.

How was the data set created?

  1. From what previous works were the data drawn?
    CoNED (source 1 of 4)
    U.S. Geological Survey, 2015, National Elevation Dataset: U.S. Geological Survey, Reston, VA.

    Online Links:

    Type_of_Source_Media: Digital Resources
    Source_Contribution:
    Downloaded CoNED Digital Elevation Model from the National Map. Projection was NAD 1983 UTM Zone 18N with the North American Vertical Datum of 1988 (NAVD 88). Download date was 2019/08/01.
    NAIP (source 2 of 4)
    U.S. Geological Survey, 2017, NAIP Digital Ortho Photo Image: USDA-FSA-APFO Aerial Photography Field Office, Salt Lake City, Utah.

    Online Links:

    Type_of_Source_Media: Digital Resources
    Source_Contribution:
    Downloaded NAIP 1-meter resolution imagery from the USGS Earth Explorer. Projection was WGS 1984 Web Mercator Auxiliary Sphere. Download date was 2019/08/01.
    NWI (source 3 of 4)
    U.S. Fish and Wildlife Service, 2017, National Wetland Inventory New York Wetlands: U.S. Fish and Wildlife Service, Madison, WI.

    Online Links:

    Type_of_Source_Media: Digital Resources
    Source_Contribution:
    Downloaded wetlands data for the state of New York in Shapefile format from the NWI download page. Projection was NAD 1983 Albers. Download date was 2019/08/01.
    NYSDEC (source 4 of 4)
    New England Interstate Water Pollution Control Commission, Prepared by Cameron Engineering and Associates, LLP, 2015, Long Island Tidal Wetlands Trends Analysis.

    Online Links:

    Type_of_Source_Media: Digital
    Source_Contribution:
    Wetland polygon shapefile prepared for Long Island Tidal Wetlands Trends Analysis. Data available by request. Data acquired 2018/05/01.
  2. How were the data generated, processed, and modified?
    Date: 2020 (process 1 of 4)
    This process step and all subsequent process steps were performed by the same person, Robert Welk, in ArcMap (ver. 10.7.1) using tools from ArcToolbox, unless otherwise stated. For complex operations, names of specific tools used are given in CAPITAL letters (any critical parameters used are given in parentheses, separated by a semicolon, immediately after the tool name). The input and output file names are provided in [square brackets] when necessary. Units for length and area calculations are meters (m) and square meters (m^2) unless otherwise stated.
    Set the data frame coordinate system and projection to NAD 1983 UTM Zone 18N. Prepare elevation dataset to be clipped to the boundaries polygon. MOSAIC TO NEW RASTER(Pixel type= 32 bit float; Mosaic operator=Mean; Cellsize=1 m) the entire CoNED raster to a new raster dataset with 1 meter resolution [elev_mosaic.tif]. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Robert Welk
    Hydrologic Technician
    2045 NY 112
    Coram, NY

    631-736-0783 x141 (voice)
    rwelk@usgs.gov
    Data sources used in this process:
    • CoNED
    Data sources produced in this process:
    • elev_mosaic
    Date: 2020 (process 2 of 4)
    Prepare mask polygon to define analysis boundaries. In order to account for the possible influence of the surrounding terrain on the analysis, a mask area larger than the salt marsh extent is first created [UVVR_mask]. At the end of the analysis the results are clipped to the boundaries of the salt marsh area [MU_mask]. Both UVVR_mask and MU_mask are edited to decide which interior polygons are removed.
    a) MERGE DEC and NWI wetland polygons to obtain [NWI_DEC.shp].
    b) EXPORT features from NWI dataset after SELECT("ATTRIBUTE" LIKE 'E2%EM%' OR "ATTRIBUTE" LIKE 'E2AB3%' OR "ATTRIBUTE" LIKE 'E2EM%' OR "ATTRIBUTE" LIKE 'E2SS%' OR "ATTRIBUTE" LIKE 'E2US4%') to select from estuarine intertidal areas of 1) emergent wetland, 2) scrub-shrub area, 3) rooted vascular aquatic bed, 4) Organic unconsolidated shore classes [NWI_exclusive_select.shp].
    c) BUFFER(Input features=[NWI_exclusive_select.shp]; Linear unit=5 meters; Dissolve type=All) to obtain the mask polygon [buff5m.shp] and ELIMINATE POLYGON PART(Condition=Percentage; Percentage=99; Eliminate contained part only) to obtain [UVVR_mask01.shp]. Apply buffer with -5 meters to obtain [MU_mask01.shp].
    d) EXPORT features from NWI dataset after SELECT("ATTRIBUTE" NOT LIKE 'E%' OR "ATTRIBUTE" LIKE '%FO')to obtain features that are not estuarine or are forested estuarine. MULTIPART TO SINGLEPART to separate individual polygons [NWI_inclusive_single.shp].
    e)To exclude the voids in the NWI map during the analysis these interior polygons need to be removed from the mask. Create a rectangular polygon that covers the domain [extent.shp]. ERASE [NWI_excusive_select.shp] from [extent.shp] and MULTIPART TO SINGLEPART to get [NWI_voids_single.shp].
    f) SELECT BY LOCATION from [NWI_inclusive_single.shp] that are completely within the [MU_mask01.shp], and SELECT BY LOCATION from [NWI_voids_single.shp] that are completely within the [MU_mask01.shp]. If any of additional polygons need to be removed from the mask include them in a new feature layer [erase_mask_manual.shp]. Merge all three feature sets to get polygons to be excluded [erase_inside.shp] from the final masks.
    g) ERASE [erase_inside.shp] from [MU_mask01.shp] and [UVVR_mask01.shp] to obtain [MU_mask.shp] and [UVVR_mask.shp], respectively. Data sources used in this process:
    • NWI
    Data sources produced in this process:
    • UVVR_mask
    Date: 2020 (process 3 of 4)
    Compute vegetated and unvegetated boundaries by image processing.
    a) EXTRACT BY MASK from elevation raster [elev_mosaic.tif] using [UVVR_mask.shp] polygon. Rescale the elevation raster values to the same range with 8-bit NAIP imagery (0 to 255) using min-max scaling. Perform ISO CLUSTER UNSUPERVISED CLASSIFICATION with 4-bands (near infrared, blue, green, and red from the NAIP imagery and the rescaled elevation raster with 32 classes and a minimum class size of 5000 cells. RECLASSIFY the classified raster by visually comparing the NAIP imagery to obtain the unvegetated-vegetated raster [UVVc.tif]. For marsh units with invalid elevation data, the classification was processed with imagery bands only and later merged with the rest of the dataset.
    b) Dissolve unvegetated regions smaller than a threshold value to the surrounding vegetated regions and vice versa to clean the UVV raster. For this purpose use the REGION(Number of neighbors=4; Zone grouping method=Within; Add Link field to output) to get the [UVV_region.tif], and TEST("Count" less than 9) to set a threshold value of 9 raster cells [UVV_test.tif]. Use RASTER CALCULATOR to toggle the value of the Link field in the region raster, where the test raster indicates regions with areas smaller than the threshold.
    c) RASTER TO POLYGON(Simplify polygons=False) and CLIP with the final marsh complex outline [mu_diss.shp] to obtain [UVVc_filt_clip.shp].
    d) REPAIR GEOMETRY and DISSOLVE(Create multipart features=False) to get filtered, clipped and dissolved unvegetated-vegetated polygons [UVVc_filt_clip_diss.shp].
    e) INTERSECT the dissolved conceptual marsh units [mu_diss.shp] with unvegetated-vegetated polygons [UVVc_filt_clip.shp], REPAIR GEOMETRY, and calculate the area of unvegetated and vegetated polygons in each marsh unit. To do this ADD GEOMETRY ATTRIBUTES(Geometry properties=Area_geodesic; Area unit=Square_meters) to get [UVV_poly.shp], and DISSOLVE(Input features=UVV_poly.shp; Dissolve fields=FID_CMU, gridcode; Statistics field=gridcode.MEAN, Area_geo.SUM) and REPAIR GEOMETRY to get [UVV_poly_diss.shp]. Edit the fields to have "TYP", "APGN_M2", and "ATOT_M2" fields for type of polygon indicating vegetated or unvegetated, surface area of the polygon, and total surface area of the marsh unit, respectively.
    f) Add field "UVVR" and calculate unvegetated to vegetated ratio based on "TYP", "APGN_M2" and "ATOT_M2" fields. If the vegetated area is zero for a marsh unit set the value of UVVR to -1.
    g) DISSOLVE(Input features=UVV_poly_diss.shp; Dissolve fields=FID_CMU, gridcode; Statistics field=UVVR, ATOT_M2 and FLG with Statistics type= First for all) to obtain mu_UVVR_FIIS.shp]. Add field "FLG" to flag anomalous marsh units based on elevation, surface area, and absence of vegetation. Set FLG to -1) no vegetated area in the marsh unit; (-10) marsh unit elevation higher than the 99.8 percentile; (-100) marsh unit elevation less than 0.2 percentile; (-200) greater than 25% of marsh unit has hydroflattened area (and has -9999 as its elevation value; (-1000) marsh unit surface area less than 900 m^2; (-10000) mean tidal range of marsh unit is extrapolated; and (0) no flag. Combination of negative values indicate combination of flags. For example, -1001 indicates no vegetated area and area less than 900 m^2.
    h) SELECT BY ATTRIBUTES FROM [CMU_NSLI] where "CLASS"= 'vegetated', and join field "APGN_M2" from CMU_NSLI.shp on the feature dataset [mu_UVVR_NSLI.shp].
    i) Rearrange field names and change the projection for better performance of web services with online base maps. PROJECT(Input coordinate system=NAD 1983 UTM Zone 18N; Output coordinate system=WGS 1984 Web Mercator Auxiliary Sphere; Geographic transformation=WGS 1984 (ITRF00) to NAD 1983) the feature dataset to obtain the final conceptual marsh units [mu_UVVR_NSLI.shp]. Data sources used in this process:
    • elev_mosaic
    • CMU_NSLI
    • NAIP
    Data sources produced in this process:
    • mu_UVVR_NSLI
    Date: 06-Aug-2020 (process 4 of 4)
    Added keywords section with USGS persistent identifier as theme keyword. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
  3. What similar or related data should the user be aware of?

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
    Marsh unit boundaries and water and land boundaries inherit their accuracy from the source data, north shore Long Island marsh units. Vegetated and unvegetated polygon accuracy is based on the 1-meter resolution National Agriculture Imagery Program (NAIP) products, and 1-meter resolution U.S. Geological Survey Coastal National Elevation Database (USGS CoNED) data.
  2. How accurate are the geographic locations?
    Horizontal accuracy is inherited from CoNED Digital Elevation Models. Vegetated and unvegetated polygons were based on the 1-meter resolution NAIP imagery. Although the analyses were performed at 1-meter resolution, the horizontal accuracy is superseded by NAIP imagery accuracy which is +/-6 meters.
  3. How accurate are the heights or depths?
  4. Where are the gaps in the data? What is missing?
    The results are specific to the marsh polygons as defined within the boundaries of the north shore Long Island salt marsh complex. A detailed on-the-ground analysis of a single site may result in a different interpretation of the wetland and marsh unit boundaries.
  5. How consistent are the relationships among the observations, including topology?
    Topological errors that occurred during geoprocessing were automatically removed by the topological rules used for the analysis. The polygons were checked for correct geometry and do not overlap. Small polygons (less than 9 square meters) were assumed to be marginal and were assigned the classification from the surrounding majority value. This resulted in polygons that were removed from the dataset and FID CMU values that are not sequential. A visual comparison between NAIP imagery was performed at randomly selected sites to verify the land and water boundaries. Marsh polygons without any vegetation were assigned a UVVR value of -1.

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints None
Use_Constraints The unvegetated to vegetated ratio for each marsh unit is defined for scientific research purposes and should not be used as a sole source of reference for any regulations and policy making. Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the source of this information.
  1. Who distributes the data set? (Distributor 1 of 1)
    U.S. Geological Survey - ScienceBase
    Denver Federal Center, Building 810, Mail Stop 302
    Denver, CO

    1-888-275-8747 (voice)
    sciencebase@usgs.gov
  2. What's the catalog number I need to order this data set? mu_UVRR_NSLI.shp (and files associated with a shapefile), browse graphic (UVVR.png), and CSDGM metadata in XML format.
  3. What legal disclaimers am I supposed to read?
    Neither the U.S. Government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Not for navigational use.
  4. How can I download or order the data?

Who wrote the metadata?

Dates:
Last modified: 19-Mar-2024
Metadata author:
U.S. Geological Survey, Northeast Region
Attn: Robert J Welk
Hydrologic Technician
2045 Route 112
Coram, NY
US

631-736-0783 x141 (voice)
whsc_data_contact@usgs.gov
Contact_Instructions:
The metadata contact email address is a generic address in the event the person is no longer with USGS. (updated on 20240319)
Metadata standard:
FGDC Content Standard for Digital Geospatial Metadata (FGDC-STD-001-1998)
This page is <https://cmgds.marine.usgs.gov/catalog/whcmsc/SB_data_release/DR_P9UNOMM8/mu_UVVR_NSLI.faq.html>
Generated by mp version 2.9.51 on Wed Jun 26 15:25:09 2024