Sustainable Seas Expedition Points along Tracks: Years 2000 and 2001

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:


What does this data set describe?

Title:
Sustainable Seas Expedition Points along Tracks: Years 2000 and 2001
Abstract:
Pulley Ridge is a series of drowned barrier islands that extends almost 200 km in 60-100 m water depths. This drowned ridge is located on the Florida Platform in the southeastern Gulf of Mexico about 250 km west of Cape Sable, Florida. This barrier island chain formed during the initial stage of the Holocene marine transgression. These islands were then submerged and left abandoned near the outer edge of the Florida Platform. The southern portion of Pulley Ridge hosts zooxanthellate scleractinian corals, green, red and brown macro algae, and a mix of deep and typically shallow-water tropical fishes. This reef community is in unusually deep water, and its extent and the controls on its distribution were unknown. To address these questions scientists from the U.S. Geological Survey Coastal and Marine Geology Program in cooperation with scientists from the University of South Florida Department of Marine Sciences have completed a detailed mapping of the southernmost 35 km of Pulley Ridge. The area was mapped using multibeam bathymetry, sidescan-sonar imagery, and high-resolution seismic-reflection profiling to define the geologic framework on which the reef is established. Submersible dives, remotely operated vehicle (ROV) transects, and transects of bottom photographs and video were collected to identify the corals and to map their distribution. This extensive suite of data has been compiled and preliminary analysis of the data suggests that the reefs are not tied to the ridge system, but instead are more broadly distributed. Whether reef distribution is controlled by oceanographic conditions or by subtle differences in the substrate that overlies the barrier island system is unclear, and are topics of continued research.
  1. How might this data set be cited?
    Halley, Robert B., Twichell, David C., and Cross, VeeAnn A., 2005, Sustainable Seas Expedition Points along Tracks: Years 2000 and 2001: Open-File Report 2005-1089, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    Cross, VeeAnn A., Twichell, David C., Halley, Robert B., Ciembronowicz, Kate T., Jarrett, Bret D., Hammar-Klose, Erika S., Hine, Al C., Locker, Stan D., and Naar, Dave F., 2005, GIS Compilation of Data Collected from the Pulley Ridge Deep Coral Reef Region: Open-File Report 2005-1089, U.S. Geological Survey, Reston, VA.

    Online Links:

  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: -83.928788
    East_Bounding_Coordinate: -83.630502
    North_Bounding_Coordinate: 26.027587
    South_Bounding_Coordinate: 24.703923
  3. What does it look like?
  4. Does the data set describe conditions during a particular time period?
    Calendar_Date: 26-Aug-2000
    Currentness_Reference:
    ground condition
  5. What is the general form of this data set?
    Geospatial_Data_Presentation_Form: vector digital data
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      This is a Vector data set. It contains the following vector data types (SDTS terminology):
      • Entity point (22125)
    2. What coordinate system is used to represent geographic features?
      Horizontal positions are specified in geographic coordinates, that is, latitude and longitude. Latitudes are given to the nearest 0.000001. Longitudes are given to the nearest 0.000001. Latitude and longitude values are specified in Decimal degrees. The horizontal datum used is North American Datum of 1983.
      The ellipsoid used is Geodetic Reference System 80.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257222.
  7. How does the data set describe geographic features?
    sse_allpnts
    Information unavailable from original metadata. (Source: Information unavailable from original metadata.)
    FID
    Internal feature number. (Source: ESRI) Sequential unique whole numbers that are automatically generated.
    Shape
    Feature geometry. (Source: ESRI) Coordinates defining the features.
    POINT
    Number indicating the navigation acquisition point along a particular trackline. (Source: Software created.)
    Range of values
    Minimum:0
    Maximum:3818
    DATE_TIME
    Data and time the point was acquired. (Source: Scientist.) Character set with date M/DD/YR and time as HH:MIN:SEC.
    LAT
    Latitude of the point. (Source: Scientist.)
    Range of values
    Minimum:24.7039233
    Maximum:26.02758667
    LONG
    Longitude of the point. (Source: Scientist.)
    Range of values
    Minimum:-83.92878833
    Maximum:-83.63050167
    DEPTH
    Depth of the submarine at that point. (Source: Scientist.)
    Range of values
    Minimum:-405.7
    Maximum:1.4
    SUB
    Text field indicating the submarine used. (Source: Scientist.) Character set.
    DISTTO
    Distance (in meters) to the previously accepted valid point. (Source: Computer calculated.)
    Range of values
    Minimum:0
    Maximum:195.3677
    FILTERVALS
    Values used in filtering the raw navigation points. (Source: Scientist.) Character set.
    SSE_ID
    Identifies the SSE dive on which the point was collected. (Source: Scientist) Character set.
    Entity_and_Attribute_Overview:
    The navigation in sse_142 is suspect. There are large apparent jumps in navigation, then no change for an extended time. What appeared to be 2 major outliers bunches were deleted, and that was all the modifications on the original point navigation. Therefore, no actual filter was applied. Since this particular SSE dive falls outside the Pulley Ridge study area, this seemed acceptable.
    Entity_and_Attribute_Detail_Citation: U.S. Geological Survey

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
    • Robert B. Halley
    • David C. Twichell
    • VeeAnn A. Cross
  2. Who also contributed to the data set?
  3. To whom should users address questions about the data?
    Robert B. Halley
    U.S. Geological Survey
    Geologist
    USGS Center for Coastal and Watershed Studies
    St. Petersburg, FL

    (727) 803-8747 x3113 (voice)
    (727) 803-2032 (FAX)
    rhalley@usgs.gov

Why was the data set created?

This polyline shapefile was generated to indicate the location of the Sustainable Seas Expedition dives in the Pulley Ridge area aboard the NOAA ship Gordon Gunter.

How was the data set created?

  1. From what previous works were the data drawn?
  2. How were the data generated, processed, and modified?
    Date: unknown (process 1 of 10)
    Converted the SSE navigation from excel spreadsheets to individual point shapefiles for each dive. This was accomplished by exporting the necessary records to a text file and then loading those as an event theme into ArcView and saving as a shapefile.
    Date: unknown (process 2 of 10)
    A line shapefile was then generated connecting the points in the order of navigation acquisition. This was done to help more readily spot obvious outliers.
    Date: unknown (process 3 of 10)
    In some cases, running a filter over the points helped remove outliers. (This is discussed in the next process step.) Some files had major outliers that needed to be deleted prior to the more automated filter process. This was done by visual inspection and usually just involved a few points. This modified shapefile was saved under a new name.
    Date: unknown (process 4 of 10)
    The submarine typically travels very slowly to aid in seafloor observations. In fact, the submarine can't travel extremely fast. Because of this, I was able to write a filter that looked at distance traveled between each navigation point. I could vary the filter values and see which points were selected as acceptable based on the filter values. The visual inspection of what appeared sensible determined if the filter values were accepted.
    Date: unknown (process 5 of 10)
    Once a reasonable filter was applied, those selected points were then saved into a new shapefile with the filter values used added as an attribute to the file. The filter works such that the first number is the distance accepted as movement between 2 adjacent points in time. The second number is the increment added to each subsequent time step. This value is smaller than the first otherwise before long very large error values would be accepted.
    Date: unknown (process 6 of 10)
    Once the individual dives were processed, these files were then combined into one shapefile using the Geoprocessing wizard in ArcView 3.2a.
    Date: 29-Mar-2017 (process 7 of 10)
    Edits to the metadata were made to fix any errors that MP v 2.9.36 flagged. This is necessary to enable the metadata to be successfully harvested for various data catalogs. In some cases, this meant adding text "Information unavailable" or "Information unavailable from original metadata" for those required fields that were left blank. Other minor edits were probably performed (title, publisher, publication place, etc.). Attempted to modify http to https where appropriate. The link to the larger work citation had to be fixed. The standard order process section in the Distribution section was incomplete and had to be modified to meet the standard - which included adding a link to the data. Added ISO 19115 Topic Category keywords. The metadata date (but not the metadata creator) was edited to reflect the date of these changes. The metadata available from a harvester may supersede metadata bundled within a download file. Compare the metadata dates to determine which metadata file is most recent. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 20-Jul-2018 (process 8 of 10)
    USGS Thesaurus keywords added to the keyword section. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 18-Nov-2019 (process 9 of 10)
    Crossref DOI link was added as the first link in the metadata. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 08-Sep-2020 (process 10 of 10)
    Added keywords section with USGS persistent identifier as theme keyword. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
  3. What similar or related data should the user be aware of?

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
  2. How accurate are the geographic locations?
  3. How accurate are the heights or depths?
  4. Where are the gaps in the data? What is missing?
    Information unavailable from original metadata.
  5. How consistent are the relationships among the observations, including topology?
    Information unavailable from original metadata.

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints: None.
Use_Constraints:
The U.S. Geological Survey must be referenced as the originator of the dataset in any future products or research derived from these data.
  1. Who distributes the data set? (Distributor 1 of 1)
    David C. Twichell
    U.S. Geological Survey
    Oceanographer
    384 Woods Hole Rd.
    Woods Hole, MA

    (508) 548-8700 x2266 (voice)
    (508) 457-2310 (FAX)
    dtwichell@usgs.gov
  2. What's the catalog number I need to order this data set? Downloadable Data
  3. What legal disclaimers am I supposed to read?
    These data were prepared by an agency of the United States Government. Neither the United States government nor any agency thereof, nor any of their employees, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or any agency thereof. Any views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or any agency thereof. Although all data published in this report have been used by the USGS, no warranty, expressed or implied, is made by the USGS as to the accuracy of the data and related materials and/or the functioning of the software. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of this data, software, or related materials.
  4. How can I download or order the data?

Who wrote the metadata?

Dates:
Last modified: 08-Sep-2020
Metadata author:
VeeAnn A. Cross
U.S. Geological Survey
Marine Geologist
384 Woods Hole Rd.
Woods Hole, MA

(508) 548-8700 x2251 (voice)
(508) 457-2310 (FAX)
vatnipp@usgs.gov
Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)

This page is <https://cmgds.marine.usgs.gov/catalog/whcmsc/open_file_report/ofr2005-1089/sse_allpntsmeta.faq.html>
Generated by mp version 2.9.50 on Tue Sep 21 18:20:20 2021