0.5-m Bathymetry from National Oceanic and Atmospheric Administration (NOAA) Survey H11077 of the Sea Floor in the Vicinity of Woods Hole, Massachusetts (H11077_0.5MUTM19_XYZ.TXT, UTM Zone 19)

The multibeam data were acquired in XTF (extended Triton data format) and recorded digitally through an ISIS data acquisition system. A Reson 8101 echosounder hull-mounted on a 29' launch deployed from the NOAA ship Whiting was used to acquire the sounding data. These data were processed using CARIS HIPS (Hydrographic Image Processing System) software for quality control, to incorporate sound velocity and tidal corrections, and to produce a base surface at 0.5-m horizontal resolution. Sound velocity corrections were derived using frequent SEACAT CTD (conductivity-temperature-depth) profiles. Typically, a CTD cast was conducted every four to six hours of multibeam acquisition. Tidal zone corrections were calculated from data acquired at the Nantucket tidal gauge. The vertical resolution of the multibeam data is approximately 0.5% of the water depth. The vertical resolution of the multibeam data is approximately 0.5% of the water depth. The data were gridded to 0.5-m resolution and exported in text (.txt) format. Vertical datum is mean lower low water; X and Y units are meters; UTM Zone 19, NAD83.

Edits to the metadata were made to fix any errors that MP v 2.9.32 flagged. This is necessary to enable the metadata to be successfully harvested for various data catalogs. In some cases, this meant adding text "Information unavailable" or "Information unavailable from original metadata" for those required fields that were left blank. Other minor edits were probably performed (title, publisher, publication place, etc.). The source information was incomplete and had to be modified to meet the standard. The spatial reference information was incomplete and had to be modified to meet the standard. The information filled in (Coordinate_Representation, Semi-major_Axis, Denominator_of_Flattening_Ratio) were filled in based on other information in the metadata. In the case of the depth resolution, the value of 9999 was entered to indicate that the original metadata did not contain the required information. The metadata date (but not the metadata creator) was edited to reflect the date of these changes. The metadata available from a harvester may supersede metadata bundled within a download file. Compare the metadata dates to determine which metadata file is most recent.

Added keywords section with USGS persistent identifier as theme keyword.