Shot-Point Navigation (500 Shot Interval) for the Boomer High-Resolution Seismic-Reflection Profiles Collected During U.S. Geological Survey (USGS) R/V Rafael Cruise 08034 off Edgartown, Massachusetts (08034_BOOMERNAV500.SHP)

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:

What does this data set describe?

Title:
Shot-Point Navigation (500 Shot Interval) for the Boomer High-Resolution Seismic-Reflection Profiles Collected During U.S. Geological Survey (USGS) R/V Rafael Cruise 08034 off Edgartown, Massachusetts (08034_BOOMERNAV500.SHP)
Abstract:
The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Massachusetts Office of Coastal Zone Management (MA CZM), is producing detailed geologic maps of the coastal sea floor. Imagery, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities along this part of the Massachusetts coastline, shows the composition and terrain of the seabed, and provides information on sediment transport and benthic habitat. Interpretive data layers were derived from the combined single-beam and multibeam echo-sounder data and sidescan-sonar data collected in the vicinity of Edgartown Harbor, Massachusetts. During August 2008 seismic-reflection profiles (Boomer and Chirp) were acquired, and during September 2008 bottom photographs and surficial sediment data were acquired as part of two ground-truth reconnaissance surveys.
  1. How might this data set be cited?
    Poppe, Larry, 2009, Shot-Point Navigation (500 Shot Interval) for the Boomer High-Resolution Seismic-Reflection Profiles Collected During U.S. Geological Survey (USGS) R/V Rafael Cruise 08034 off Edgartown, Massachusetts (08034_BOOMERNAV500.SHP): Open-File Report 2009-1001, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    Poppe, L.J., McMullen, K.Y., Foster, D.S., Blackwood, D.S., Williams, S.J., Ackerman, S.D., Moser, M.S., and Glomb, K.A., 2010, Geological Interpretation of the Sea Floor Offshore of Edgartown, Massachusetts: Open-File Report 2009-1001, U.S. Geological Survey, Reston, VA.

    Online Links:

  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: -70.548292
    East_Bounding_Coordinate: -70.434536
    North_Bounding_Coordinate: 41.454708
    South_Bounding_Coordinate: 41.385917
  3. What does it look like?
    http://pubs.usgs.gov/of/2009/1001/data/seismic/boomer/nav500/08034_boomernav500.gif (GIF)
    Browse graphic showing location of Boomer high-resolution seismic-reflection profiles collected during RV Rafael cruise 08034.
  4. Does the data set describe conditions during a particular time period?
    Calendar_Date: 20-Aug-2008
    Currentness_Reference:
    ground condition
  5. What is the general form of this data set?
    Geospatial_Data_Presentation_Form: vector digital data
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      This is a Vector data set. It contains the following vector data types (SDTS terminology):
      • Entity point (50)
    2. What coordinate system is used to represent geographic features?
      Horizontal positions are specified in geographic coordinates, that is, latitude and longitude. Latitudes are given to the nearest 0.000001. Longitudes are given to the nearest 0.000001. Latitude and longitude values are specified in Decimal degrees. The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257224.
  7. How does the data set describe geographic features?
    08034_boomernav500
    Shapefile (Source: ESRI)
    FID
    Internal feature number. (Source: ESRI) Sequential unique whole numbers that are automatically generated.
    Shape
    Feature geometry. (Source: ESRI) Coordinates defining the features.
    Line
    Line designation (Source: Scientist) Character field
    Shot
    Shot point number (Source: Processor)
    Range of values
    Minimum:1
    Maximum:7185
    Units:shot points
    Resolution:1
    Longitude
    Longitude coordinate, WGS84 (Source: Processor)
    Range of values
    Minimum:-70.548292
    Maximum:-70.434536
    Units:decimal degrees
    Resolution:0.000001
    Latitude
    Latitude coordinate, WGS84 (Source: Processor)
    Range of values
    Minimum:41.385917
    Maximum:41.454708
    Units:decimal degrees
    Resolution:0.000001
    Entity_and_Attribute_Overview:
    Shot-point navigation data with shot points at the beginning and end of each line and with shot points every 500 shots along the line for the Boomer seismic-reflection data collected along five lines in the vicinity of Edgartown Harbor, offshore Massachusetts in geographic, WGS84. The seismic data were collected during USGS survey 08034, conducted August 20, 2008. Navigation went down between 16:08:06 and 16:12:13, so line file 3 is interpolated.
    Entity_and_Attribute_Detail_Citation: U.S. Geological Survey

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
    • Larry Poppe
  2. Who also contributed to the data set?
  3. To whom should users address questions about the data?
    Larry Poppe
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2314 (voice)
    508-457-2310 (FAX)
    lpoppe@usgs.gov

Why was the data set created?

To release the shot-point navigation data with shot points at the beginning and end of each line and with shot points every 500 shots along the line for the Boomer seismic-reflection data collected along five lines in the vicinity of Edgartown Harbor, offshore Massachusetts in geographic, WGS84.

How was the data set created?

  1. From what previous works were the data drawn?
  2. How were the data generated, processed, and modified?
    Date: 20-Aug-2008 (process 1 of 9)
    High-resolution Boomer seismic-reflection data were collected August 20 aboard the Research Vessel Rafael. The seismic data were acquired digitally along 5 lines totaling approximately 27.6 km with a GeoAcoustics Boomer source, GeoAcoustics power supply, Benthos AQ4 single-channel streamer, and Chesapeake Systems SonarWiz v4003.0065 acquisition software. The Boomer was fired at a rate of 0.5 seconds at a power output of 175 joules. The received signal was filtered between 100-3000 Hz with a GeoPulse receiver. The trace data recorded for 266 ms with a sample rate of 0.533 ms in standard SEG-Y format. Person who carried out this activity:
    Dave Foster
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2271 (voice)
    508-457-2310 (FAX)
    dfoster@usgs.gov
    Date: 20-Aug-2008 (process 2 of 9)
    A script was run that used Seismic Unix 4.0 to read the SEG-Y files and extract shot number, horizontal position, year, day, and time of day from the header. AWK was used to parse the ASCII data and convert position in seconds of arc to decimal degrees. The ASCII file was filtered using Linux "sort" to keep only the unique horizontal positions output to a comma-delimited text file. Person who carried out this activity:
    Dave Foster
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2271 (voice)
    508-457-2310 (FAX)
    dfoster@usgs.gov
    Data sources produced in this process:
    • 08034_boomernav.csv
    Date: 19-Aug-2009 (process 3 of 9)
    The ASCII comma-delimited shot-point navigation data were imported and converted to a shapefile using the create feature class using X-Y table in ArcCatalog 9.2 and the coordinate system and datum were defined as geographic, WGS84. Person who carried out this activity:
    Dave Foster
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2271 (voice)
    508-457-2310 (FAX)
    dfoster@usgs.gov
    Data sources used in this process:
    • 08034_boomernav.csv
    Data sources produced in this process:
    • 08034_boomernavline.shp
    Date: 19-Aug-2009 (process 4 of 9)
    Unique shot points were converted to lines using VAC Extras 1.97, convert points to line version 2 (a local toolset) within ArcMap 9.2. Person who carried out this activity:
    Dave Foster
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2271 (voice)
    508-457-2310 (FAX)
    dfoster@usgs.gov
    Data sources used in this process:
    • 08034_boomernavline.shp
    Data sources produced in this process:
    • 08034_boomernavline.shp
    Date: 19-Aug-2009 (process 5 of 9)
    A shot-point navigation file that has points at the beginning and end of each line with shot points every 500 shots along the line were created with ArcTools 9.2 Linear Referencing Tools using the shot point and shot line files created for the Boomer dataset. First, the file with unique shot-point positions was used to create a polyline file using an in-house utility, Convert Points to Line v.2. Under ArcToolbox, Linear Referencing Tools, a feature class was created with Create Routes with the polyline file as input and the measure source being length. Next, a polylineM file was created with Calibrate Routes using the route feature class created in the previous step and the unique shot-point position as input. The measure field associated with the polylineM file was Shot. The layer properties of the polylineM file and the Hatch Class definition was set to an interval of 500 (shots) and the end hatches were defined to create the start and end shots of each line. In ArcMap 9.2 a custom tool was created under Linear Referencing commands to convert hatches to graphics. XToolsPro was used to convert graphics to a shapefile. The attributes Line and Shot were added to the event table properties using Locate Features Along Routes. The resulting DBF file was converted to an event feature using Make Route Event Layer using Line as the route identifier and shot as the measure field. The event feature was added to the ArcMap data frame and exported to a shapefile. Finally, the attributes were sorted using line as the primary field and shot as the secondary field using VAC Extras, Table Sort to make sure shot points were in sequential order. Person who carried out this activity:
    Dave Foster
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2271 (voice)
    508-457-2310 (FAX)
    dfoster@usgs.gov
    Data sources used in this process:
    • 08034_boomernav.shp
    • 08034_boomernavline.shp
    Data sources produced in this process:
    • 08034_boomernav500.shp
    Date: 02-Mar-2016 (process 6 of 9)
    Edits to the metadata were made to fix any errors that MP v 2.9.30 flagged. This is necessary to enable the metadata to be successfully harvested for various data catalogs. In some cases, this meant adding text "Information unavailable" or "Information unavailable from original metadata" for those required fields that were left blank. Other minor edits were probably performed (title, publisher, publication place, etc.). The metadata date (but not the metadata creator) was edited to reflect the date of these changes. The metadata available from a harvester may supersede metadata bundled within a download file. Compare the metadata dates to determine which metadata file is most recent. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Rd.
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 20-Jul-2018 (process 7 of 9)
    USGS Thesaurus keywords added to the keyword section. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 18-Nov-2019 (process 8 of 9)
    Crossref DOI link was added as the first link in the metadata. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 08-Sep-2020 (process 9 of 9)
    Added keywords section with USGS persistent identifier as theme keyword. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
  3. What similar or related data should the user be aware of?
    O'Hara, C.J., and Oldale, R.N., 1987, Maps showing the geology, shallow structure, and bedform morphology of Nantucket Sound, Massachusetts: Miscellaneous Field Studies Map MF-1911, U.S. Geological Survey, Reston, VA.

    Poppe, L.J., McMullen, K.Y., Foster, D.S., Blackwood, D.S., Williams, S.J., Ackerman, S.D., Barnum, S.R., and Brennan, R.T., 2008, Sea-floor character and sedimentary processes in the vicinity of Woods Hole, Massachusetts:: Open-File Report 2008-1004, U.S. Geological Survey, Reston, VA.

    Online Links:

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
    All attributes were checked in a consistent manner.
  2. How accurate are the geographic locations?
    Navigation was by DGPS; positional accuracy to less than 10 m. The Boomer source was towed astern and to the port side of the RV Rafael on the water surface. The single-channel hydrophone streamer was towed astern and to the starboard side and approximately 0.5 meters below the water surface. The layback offset was accounted for in the positional data recorded in the SEG-Y headers. The layback position was 8 meters aft of the vessel. Navigation went down between 16:08:06 and 16:12:13, so line file 3 is interpolated.
  3. How accurate are the heights or depths?
    The vertical position was local sea level and there have been no corrections to a datum or for tidal variations.
  4. Where are the gaps in the data? What is missing?
    Shot points at the beginning and end of each line and with shot points every 500 shots along the Boomer seismic acquisition lines collected during the RV Rafael cruise 08034 are included in this data set. There is no navigation for line 3 between shot points 794 and 1449.
  5. How consistent are the relationships among the observations, including topology?
    No additional checks for consistency were performed on this data.

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints: none
Use_Constraints:
Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey (USGS) as the source of this information.
  1. Who distributes the data set? (Distributor 1 of 1)
    U.S. Geological Survey
    Attn: Larry Poppe
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2314 (voice)
    508-457-2310 (FAX)
    lpoppe@usgs.gov
  2. What's the catalog number I need to order this data set? Downloadable Data
  3. What legal disclaimers am I supposed to read?
    Neither the U.S. Government, the Department of the Interior, nor the USGS, nor the National Oceanic and Atmospheric Administration (NOAA), nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS or NOAA in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
  4. How can I download or order the data?
  5. What hardware or software do I need in order to use the data set?
    These data are available in Environmental Systems Research Institute (ESRI) shapefile format. The user must have ArcGIS or ArcView 3.0 or greater software to read and process the data file. In lieu of ArcView or ArcGIS, the user may utilize another GIS application package capable of importing data. A free data viewer, ArcExplorer, capable of displaying the data is available from ESRI at www.esri.com. The user must have software capable of uncompressing archived zip files, such as WinZip or Pkware.

Who wrote the metadata?

Dates:
Last modified: 16-Nov-2021
Metadata author:
U.S. Geological Survey
Attn: Larry Poppe
Geologist
384 Woods Hole Road
Woods Hole, MA
USA

508-548-8700 x2314 (voice)
508-457-2310 (FAX)
whsc_data_contact@usgs.gov
Contact_Instructions:
The metadata contact email address is a generic address in the event the metadata contact is no longer with the USGS or the email is otherwise invalid.
Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)
This page is <https://cmgds.marine.usgs.gov/catalog/whcmsc/open_file_report/ofr2009-1001/08034_boomernav500.shp.faq.html>
Generated by mp version 2.9.50 on Tue Nov 16 10:06:37 2021