Bottom photographs (JPEG format) collected by the U.S. Geological Survey offshore of Massachusetts between Duxbury and Hull (DH_SEABOSS_Photos)

The SEABed Observation and Sampling System (SEABOSS) was designed by the U.S. Geological Survey (USGS) for rapid and effective collection of seabed images and sediment samples in coastal regions. The observations from video and still cameras and the sediment data are used to explore the nature of the seafloor and, in conjunction with high-resolution geophysical data, to make interpretive maps of sedimentary environments and validate the acoustic remote sensing data. The SEABOSS is a simple system that can be deployed from both small and large surface vessels and operates in water depths up to 200m. It incorporates two video cameras, a still camera, a depth sensor, and a modified Van Veen sediment sampler. The elements of this particular SEABOSS system are held within a stainless steel framework that measures 1.2 x 1.2 meters and weighs 136 kilograms overall. The frame has a stabilizer fin that orients the system as it drifts over the seabed. The digital camera, a Minolta DiMAGE A2, is mounted in a machined Delrin housing with a flat port and is set for 3264x2448 pixel images at the "fine" setting for compression. This allows the camera to be used for over 200 images with a 1 GB Compact Flash card without downloading. The system also has a PHOTOSEA strobe. Two lasers are set 20 cm apart (both as they are mounted on the SEABOSS frame and as seen in photographs and video on the seabed) for scale measurements. The red laser dots can usually be seen in the photo depending on the bottom type and the distance to the sea floor. A third laser is positioned at an angle so that when it intersects the other lasers, the SEABOSS is at the optimum height (approximately 75 cm) off the bottom for a still photograph. The camera is set to a manual focus and set to a default focus distance once the camera is powered up. The default focus distance is slightly less than the optimum height above the seafloor to account for optical distortion under water. All of the system's elements are powered from the surface vessel through a conducting cable. The winch operator views a video monitor so that the system can be maintained at an appropriate height above the bottom and obstacles can be avoided. Scientists also view video monitors and decide when to sample and take still photographs. Video displays include station number, water depth (from the depth sensor), and date, time, and geographic position (provided by a shipboard navigation system). The SEABOSS was deployed from the R/V Connecticut off the ship's J-frame on the starboard side. The vessel occupied one of the target stations and deployed the SEABOSS. The winch operator lowered the sampler until the seafloor was observed in the real-time bottom video. On most stations, the vessel and sampler drifted with wind and current for approximately 5-15 minutes. The SEABOSS operator monitored the real-time bottom video and acquired still bottom photographs at points of interest by remotely triggering the camera shutter. The number of photographs per station varied from 4-20 depending on the complexity of the bottom. The third laser on the system was set to an angle such that the optimum photograph height was 75 cm. The default focus on the camera was set to 50 cm. The imaged area is most often within 0.5 to 1.25 meters from left to right. Other camera settings are as follows: aperture is set at f/8; shutter speed is 1/125 second. The camera time during this survey was set to EDT, unless otherwise noted (see metadata for DH_BottomPhotos.shp (https://pubs.usgs.gov/of/2009/1072/html/appendix1.html) for details on when the time value was wrong and how it was corrected).