Shorelines of the Cape Cod coastal region from Provincetown to the southern end of Monomoy Island, Massachusetts, used in shoreline change analysis (CapeCod_shorelines.shp)

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:

What does this data set describe?

Title:
Shorelines of the Cape Cod coastal region from Provincetown to the southern end of Monomoy Island, Massachusetts, used in shoreline change analysis (CapeCod_shorelines.shp)
Abstract:
Sandy ocean beaches are a popular recreational destination, often surrounded by communities containing valuable real estate. Development is on the rise despite the fact that coastal infrastructure is subjected to flooding and erosion. As a result, there is an increased demand for accurate information regarding past and present shoreline changes. To meet these national needs, the Coastal and Marine Geology Program of the U.S. Geological Survey (USGS) is compiling existing reliable historical shoreline data along open-ocean sandy shores of the conterminous United States and parts of Alaska and Hawaii under the National Assessment of Shoreline Change project. There is no widely accepted standard for analyzing shoreline change. Existing shoreline data measurements and rate calculation methods vary from study to study and prevent combining results into state-wide or regional assessments. The impetus behind the National Assessment project was to develop a standardized method of measuring changes in shoreline position that is consistent from coast to coast. The goal was to facilitate the process of periodically and systematically updating the results in an internally consistent manner.
Supplemental_Information:
Cross-referenced citations are applicable to the dataset as a whole. Additional citations are located within individual process steps that pertain specifically to the method described in that step.
  1. How might this data set be cited?
    U.S. Geological Survey, 2010, Shorelines of the Cape Cod coastal region from Provincetown to the southern end of Monomoy Island, Massachusetts, used in shoreline change analysis (CapeCod_shorelines.shp): Open-File Report 2010-1119, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    Himmelstoss, Emily A., Kratzmann, Meredith G., Hapke, Cheryl J., Thieler, E. Robert, and List, Jeffrey, 2010, National Assessment of Shoreline Change: A GIS Compilation of Vector Shorelines and Associated Shoreline Change Data for the New England and Mid-Atlantic Coasts: Open-File Report 2010-1119, U.S. Geological Survey, Reston, VA.

    Online Links:

  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: -70.246315
    East_Bounding_Coordinate: -69.925831
    North_Bounding_Coordinate: 42.082530
    South_Bounding_Coordinate: 41.540240
  3. What does it look like?
  4. Does the data set describe conditions during a particular time period?
    Beginning_Date:
    Ending_Date: 2000
    Currentness_Reference:
    ground condition
  5. What is the general form of this data set?
    Geospatial_Data_Presentation_Form: vector digital data
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      This is a Vector data set. It contains the following vector data types (SDTS terminology):
      • String (283)
    2. What coordinate system is used to represent geographic features?
      Horizontal positions are specified in geographic coordinates, that is, latitude and longitude. Latitudes are given to the nearest 0.000001. Longitudes are given to the nearest 0.000001. Latitude and longitude values are specified in Decimal degrees. The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257224.
  7. How does the data set describe geographic features?
    CapeCod_shorelines
    Vector shorelines (Source: U.S. Geological Survey)
    FID
    Internal feature number. (Source: ESRI) Sequential unique whole numbers that are automatically generated.
    Shape
    Feature geometry. (Source: ESRI) Coordinates defining the features.
    RouteID
    Route identification value assigned to individual lidar shoreline line segments. A unique cross-shore profile identification value is stored at each vertex of the lidar route and serves as a common attribute to the shoreline uncertainty table (CapeCod_shorelines_uncertainty.dbf). (Source: USGS)
    ValueDefinition
    0Short integer field where zeros are "no data" and automatically filled in for the remaining shoreline polylines not derived from lidar.
    Date_
    Date of shoreline position; date of survey as indicated on source material. A default date of 07/01 was assigned to shorelines where only the year was known (month and day unknown). Using July, the mid-point month of the calendar year, minimizes the potential offset to the actual shoreline date by a maximum of six months. (Source: USGS) Character string of length 10
    Uncy
    Estimate of shoreline position uncertainty. Actual shoreline position is within the range of this value (plus or minus, meters). The uncertainty was determined by Equation 2 in USGS Open-File Report (OFR) 2010-1118 (cross-referenced in this metadata file). The historic shoreline uncertainty values contain all of the measurement errors listed in Table 5 of OFR 2010-1118, except for the uncertainty of the High Water Line (HWL). The HWL uncertainty listed in Table 5 was averaged for the entire study region. However, the uncertainty of the HWL at an individual transect can be determined with more precision along the shoreline route. The HWL uncertainty was added to the historic shoreline uncertainty stored in the shoreline attribute table during the DSAS rate calculation process to better account for uncertainty at individual transects alongshore as opposed to using a regionally averaged value. This was done using linear referencing that interpolates a value based on data stored in the shoreline_uncertainty dBase file (.dbf) at a specific transect/shoreline intersect alongshore. The lidar shoreline position uncertainty is also stored in the associated shoreline_uncertainty.dbf file and values are interpolated at specific transect/shoreline intersections using the same linear referencing method. The lidar uncertainty attribute field was filled with null values while residing in the geodatabase. Upon exporting the shoreline feature class to a shapefile for publication, the null values in the lidar uncertainty field were automatically converted to zero values. (Source: USGS)
    ValueDefinition
    0Zeros are "no data" and serve as place fillers for the lidar shorelines. Actual uncertainty values for lidar are stored in shoreline uncertainty dBase (.dbf) file.
    Source
    Agency that provided shoreline feature or the data source used (e.g. T-sheet) to digitize shoreline feature. (Source: USGS) Information unavailable from original metadata.
    Shape_Leng
    Length of feature in meters units (UTM zone 19N, WGS 84) (Source: ESRI)
    Range of values
    Minimum:6.717709
    Maximum:44644.010927
    Year_
    Four digit year of shoreline (Source: USGS)
    Range of values
    Minimum:1848
    Maximum:2000
    Default_D
    Differentiates between shorelines that have known month and day attributes and those that use the default value of 07/01 when only the year is known. (Source: USGS)
    ValueDefinition
    0Shoreline month and day are known.
    1Shoreline month and day are unknown and default value of 07/01 was used.

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
    • U.S. Geological Survey
  2. Who also contributed to the data set?
  3. To whom should users address questions about the data?
    U.S. Geological Survey
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 (voice)
    508-547-2310 (FAX)

Why was the data set created?

This dataset includes shorelines from 15 years ranging from 1848 to 2000 in the Cape Cod coastal region from Provincetown to the southern end of Monomoy Island, Massachusetts. Shorelines were compiled from T-sheets (National Oceanic and Atmospheric Administration), T-sheets and air photos (Massachusetts Coastal Zone Management, National Oceanic and Atmospheric Administration), and lidar (USGS). Historical shoreline positions serve as easily understood features that can be used to describe the movement of beaches through time. These data are used to calculate rates of shoreline change for the U.S. Geological Survey's (USGS) National Assessment Project. Rates of long-term and short-term shoreline change were generated in a GIS using the Digital Shoreline Analysis System (DSAS) version 4.1. DSAS uses a measurement baseline method to calculate rate-of-change statistics. Transects are cast from the reference baseline to intersect each shoreline, establishing measurement points used to calculate shoreline change rates.

How was the data set created?

  1. From what previous works were the data drawn?
  2. How were the data generated, processed, and modified?
    Date: 2008 (process 1 of 15)
    Shoreline data were sought in an effort to compile as many quality shorelines as possible for the region. Digital shorelines, if available from another agency, were acquired. If no digital shorelines were available or if a data set was incomplete, T-sheets were requested from NOAA and received as scanned raster images. Person who carried out this activity:
    Emily Himmelstoss
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2262 (voice)
    508-457-2310 (FAX)
    ehimmelstoss@usgs.gov
    Date: 2008 (process 2 of 15)
    T-sheets were geo-registered using ERDAS Imagine geographic imaging software (v.9.3) by placing 10-20 well-spaced ground control points at gridline intersections. Some T-sheets may have required additional coordinate transformation information from NOAA to account for datum offsets between historical datums (USSD) and modern datums (NAD27 or NAD83). Datum transformations were applied to GCP coordinates prior to registration. Total RMS error for the rectification process was maintained below 1 pixel, which translates to approximately 4 meters at a scale of 1:20,000 and 1.5 meters at a scale of 1:10,000. Person who carried out this activity:
    Meredith Kratzmann
    U.S. Geological Survey
    Contractor
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 (voice)
    mkratzmann@usgs.gov
    Date: 2009 (process 3 of 15)
    Vector shorelines were digitized from the georegistered T-sheets using standard editing tools in ArcMap v9.3. Quality assessments were performed and shorelines were edited to remove any overlap between adjacent shorelines. No edgematching between adjacent shorelines was attempted. Person who carried out this activity:
    Meredith Kratzmann
    U.S. Geological Survey
    Contractor
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 (voice)
    mkratzmann@usgs.gov
    Date: 2009 (process 4 of 15)
    Shorelines were projected in ESRI's ArcToolbox (v.9.3) > Data Management Tools > Projections and Transformations > Feature > Project. Parameters: input projection = geographic (NAD 83); output projection = UTM zone 19N (NAD 83); transformation = none. Person who carried out this activity:
    Emily Himmelstoss
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2262 (voice)
    508-457-2310 (FAX)
    ehimmelstoss@usgs.gov
    Date: 2009 (process 5 of 15)
    An operational Mean High Water (MHW) shoreline was extracted from the lidar surveys within Matlab using a method similar to the one developed by Stockdon et al. (2002). Shorelines were extracted from cross-shore profiles which consist of bands of lidar data 2 m wide in the alongshore direction and spaced every 40 m along the coast. For each profile, the seaward sloping foreshore points were identified and a linear regression was fit through them. The regression was evaluated at the operational MHW elevation to yield the cross-shore position of the MHW shoreline. If the MHW elevation was obscured by water points, or if a data gap was present at MHW, the linear regression was simply extrapolated to the operational MHW elevation. A lidar positional uncertainty associated with this point was also computed. The horizontal offset between the datum-based lidar MHW shoreline and the proxy-based historical shorelines nearly always acts in one direction and the "bias" value was computed at each profile (Ruggiero and List, 2009). In addition an uncertainty associated with the bias was also computed, which can also be thought of as the uncertainty of the HWL shorelines due to water level fluctuations. Repeating this procedure at successive profiles generated a series of X,Y points that contain a lidar positional uncertainty, a bias, and a bias uncertainty value. Ruggiero, P. and List, J.H., 2009. Improving Accuracy and Statistical Reliability of Shoreline Position and Change Rate Estimates. Journal of Coastal Research: v.25, n.5, pp.1069-1081. Stockdon, H.F., Sallenger, A.H., List, J.H., and Holman, R.A., 2002. Estimation of Shoreline Position and Change using Airborne Topographic Lidar Data: Journal of Coastal Research, v.18, n.3, pp.502-513. Person who carried out this activity:
    Kathryn Weber
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 (voice)
    508-457-2310 (FAX)
    kweber@usgs.gov
    Date: 2009 (process 6 of 15)
    The lidar data were collected in projected coordinates (WGS 84 UTM zone 19N). The series of operational MHW points extracted from the cross-shore lidar profiles were converted to a point feature class within a geodatabase in ArcCatalog by right-mouse clicking the point data file > Create Feature Class > From XY table. The point feature class was converted to a polyline-M file by connecting adjacent profile points to form a vector shoreline feature using ET GeoWizards > Convert > Point to Polyline Z (M). The lidar profile ID value was stored as the M-value. The lidar vector shoreline was then converted to a route using ArcToolbox v9.3 Linear Referencing Tools > Create Routes. Parameters: Input Line Features = polyline M file; Route Identifier Field = ET_ID (created by ET GeoWizard when constructing polyline-M field), Measure Source = Length, default values for rest. The unique cross-shore profile ID is stored as the M-value at each vertex. The route was calibrated using ETGeoWizard > LinRef tab > Calibrate routes with points. Parameters: Attribute Field selected, Point layer = original point shapefile, Route ID field = RouteID, Measure Field = ID (lidar profile ID), Input search tolerance = 40, Interpolation between points checked, Recalculate measures using calibration points and shortest path distance between vertices checked, every other option unchecked. The calibration assigns interpolated measure values from the start to the end of the route based on the known profile IDs stored at each vertex. This profile ID is used as the common attribute field between the route file and an uncertainty table (CapeCod_shorelines_uncertainty.dbf) storing the lidar positional uncertainty, the bias correction value, and the uncertainty of the bias correction for each point of the original lidar data.
    During the rate calculation process DSAS uses linear referencing to retrieve the uncertainty and bias values stored in the associated table. The calculation of these values is explained in detail in the full report, National Assessment of Shoreline Change for the New England and Mid-Atlantic coasts cross-referenced in this metadata file. Please refer specifically to the methods section titled "The Proxy-Datum Bias Correction between HWL and MHW shorelines". For a detailed explanation of the method used to convert the lidar shoreline to a route, please refer to "Appendix 2- A case study of complex shoreline data" in the DSAS user guide: Himmelstoss, E.A. 2009. "DSAS 4.0 Installation Instructions and User Guide" in: Thieler, E.R., Himmelstoss, E.A., Zichichi, J.L., and Ergul, Ayhan. 2009. Digital Shoreline Analysis System (DSAS) version 4.0 - An ArcGIS extension for calculating shoreline change: U.S. Geological Survey Open-File Report 2008-1278. http://woodshole.er.usgs.gov/project-pages/DSAS/version4/images/pdf/DSASv4.pdf This process step and all subsequent process steps were performed by the same person - Emily Himmelstoss. Person who carried out this activity:
    Emily Himmelstoss
    U.S. Geological Survey
    Geologist
    384 Woods Hole Road
    Woods Hole, MA
    USA

    508-548-8700 x2262 (voice)
    508-457-2310 (FAX)
    ehimmelstoss@usgs.gov
    Date: 2009 (process 7 of 15)
    Historic shoreline positions were projected in ESRI's ArcToolbox (v.9.3) > Data Management Tools > Projections and Transformations > Feature > Project. Parameters: input projection = UTM zone 19N (NAD 83); output projection = geographic coordinates (WGS84); transformation = NAD_1983_To_WGS_1984_1. Shorelines from all sources were then appended to the lidar route data in ArcToolbox > Data Management Tools > General > Append to produce a single shoreline file for the region. The final shoreline dataset was coded with attribute fields (ID, Date, Quad, Uncertainty (Uncy), Source, and Year). These fields are required for the Digital Shoreline Analysis System (DSAS), which was used to calculate shoreline change rates.
    Date: 2009 (process 8 of 15)
    The appended shoreline file and the shoreline uncertainty table (.dbf) were imported into a personal geodatabase in ArcCatalog v9.3 by right-clicking on the geodatabase > Import (feature class for shoreline file and table for uncertainty table) for use with the Digital Shoreline Analysis System (DSAS) v4.1 software to perform rate calculations.
    Date: 2010 (process 9 of 15)
    The shoreline feature class was exported from the personal geodatabase back to a shapefile in ArcCatalog v9.3 by right-clicking on the shoreline file > Export > To Shapefile (single) for publication purposes.
    Date: 2010 (process 10 of 15)
    The data were projected in ArcToolbox v9.3 > Data Management Tools > Projections and Transformations > Feature > Project. Parameters: input projection = UTM zone 19N (WGS 84); output projection = geographic coordinates (WGS84); transformation = none.
    Date: 16-Nov-2016 (process 11 of 15)
    Edits to the metadata were made to fix any errors that MP v 2.9.34 flagged. This is necessary to enable the metadata to be successfully harvested for various data catalogs. In some cases, this meant adding text "Information unavailable" or "Information unavailable from original metadata" for those required fields that were left blank. Other minor edits were probably performed (title, publisher, publication place, etc.). Added an online link to the data in the identification section. Fixed cross-reference online links. Fixed a link in a process step. Minor fixes to the attribute format for some attributes were needed. The distribution format name was modified in an attempt to be more consistent with other metadata files of the same data format. The metadata date (but not the metadata creator) was edited to reflect the date of these changes. The metadata available from a harvester may supersede metadata bundled within a download file. Compare the metadata dates to determine which metadata file is most recent. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 07-Feb-2017 (process 12 of 15)
    Keywords section of metadata optimized for discovery in USGS Coastal and Marine Geology Data Catalog. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Alan O. Allwardt
    Contractor -- Information Specialist
    2885 Mission Street
    Santa Cruz, CA

    831-460-7551 (voice)
    831-427-4748 (FAX)
    aallwardt@usgs.gov
    Date: 26-Apr-2018 (process 13 of 15)
    Added keywords from Coastal and Marine Ecological Classification Standard (CMECS) to metadata. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Alan O. Allwardt
    Contractor -- Information Specialist
    2885 Mission Street
    Santa Cruz, CA

    831-460-7551 (voice)
    831-427-4748 (FAX)
    aallwardt@usgs.gov
    Date: 18-Nov-2019 (process 14 of 15)
    Crossref DOI link was added as the first link in the metadata. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 08-Sep-2020 (process 15 of 15)
    Added keywords section with USGS persistent identifier as theme keyword. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
  3. What similar or related data should the user be aware of?
    Hapke, Cheryl J., Himmelstoss, Emily A., Kratzmann, Meredith G., List, Jeffrey, and Thieler, E. Robert, 2010, National Assessment of Shoreline Change: Historical Shoreline Change along the New England and Mid-Atlantic Coasts: Open-File Report 2010-1118, U.S. Geological Survey, Reston, VA.

    Online Links:

    Thieler, E.R., Himmelstoss, E.A., Zichichi, J.L., and Ergul, A., 2009, Digital Shoreline Analysis System (DSAS) version 4.0 - An ArcGIS extension for calculating shoreline change: Open-File Report 2008-1278, U.S. Geological Survey, Reston, VA.

    Online Links:

    Other_Citation_Details: Current version of software at time of use was 4.1
    Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), Coastal Services Center (CSC), Unknown, 1996-2000 NOAA/USGS/NASA Airborne LiDAR Assessment of Coastal Erosion (ALACE) Project for the U.S. Coastline: NOAA's Ocean Service, Coastal Services Center (CSC), Charleston, SC.

    Other_Citation_Details:
    Original online linkage, which no longer appears valid: http://www.csc.noaa.gov/ldart
    National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), Unknown, Scanned National Ocean Service (NOS) Coastal Survey Maps (also known as Topographic Survey sheets, or T-sheets): NOAA shoreline manuscripts (T-sheets) Information unavailable from original metadata., National Oceanic and Atmospheric Administration, Washington, D.C..

    Thieler, E. Robert, O'Connell, James F., and Schupp, Courtney A., 20010904, The Massachusetts Shoreline Change Project: 1800s to 1994 Technical Report: Administrative Report Information unavailable from original metadata., U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
    The data provided here are a compilation of shorelines from multiple sources, spanning 152 years. The attributes are based on the requirements of the Digital Shoreline Analysis System (DSAS) software and have gone through a series of quality assurance procedures.
  2. How accurate are the geographic locations?
    Shoreline data have been acquired from 1848 to 2000, the horizontal accuracy of which varies with respect to data source from which the shorelines were digitized, the lidar data from which the shorelines were extracted, and the time period. Shorelines prior to 1950 have an estimated positional uncertainty of plus or minus 10.8 meters. Shorelines from 1960-1980 have an estimated positional uncertainty of plus or minus 5.1 meters. Air photo-derived shorelines from 1990-2000s have an estimated positional uncertainty of plus or minus 3.2 meters. The lidar shoreline from 2000 has an estimated positional uncertainty of plus or minus 2.3 meters. Please visit the 'Uncertainties and Errors' section in the corresponding USGS Open-File Report (http://pubs.usgs.gov/of/2010/1118/) for a complete explanation of the measurement uncertainties associated with these shorelines.
  3. How accurate are the heights or depths?
  4. Where are the gaps in the data? What is missing?
    This shoreline file is complete and contains all shoreline segments used to calculate shoreline change rates along sections of the Cape Cod coastal region where shoreline position data were available. These data adequately represented the shoreline position at the time of the survey. Remaining gaps in these data, if applicable, are a consequence of non-existing data or existing data that did not meet quality assurance standards.
  5. How consistent are the relationships among the observations, including topology?
    Adjacent shoreline segments do not overlap and are not necessarily continuous. Shorelines were quality checked for accuracy. Any slight offsets between adjacent segments due to georeferencing and digitizing error are taken into account in the uncertainty calculations included in the corresponding report (U.S. Geological Survey Open-file Report 2010-1118).

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints None
Use_Constraints Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the originator of the dataset.
  1. Who distributes the data set? (Distributor 1 of 1)
    U.S. Geological Survey
    Woods Hole Coastal and Marine Science Center
    Woods Hole, MA
    USA

    508-548-8700 (voice)
    508-547-2310 (FAX)
  2. What's the catalog number I need to order this data set? Downloadable Data: USGS Open-File Report 2010-1119
  3. What legal disclaimers am I supposed to read?
    Neither the U.S. Government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
  4. How can I download or order the data?
    • Availability in digital form:
      Data format: This WinZip (version 9.0) file contains a shapefile of historic shorelines from 1848 to 2000 for the sandy shorelines of Cape Cod from Provincetown to Monomoy Island, Massachusetts. in format Shapefile (version ArcGIS 9.3) ESRI polyline shapefile Size: 0.873
      Network links: http://pubs.usgs.gov/of/2010/1119/data/CapeCod_shorelines.zip
    • Cost to order the data: None

  5. What hardware or software do I need in order to use the data set?
    This zip file contains data available in Environmental Systems Research Institute (ESRI) polyline shapefile format. The user must have ArcGIS or ArcView 3.0 or greater software to read and process the data file. In lieu of ArcView or ArcGIS, the user may utilize another GIS application package capable of importing the data. A free data viewer, ArcExplorer, capable of displaying the data is available from ESRI at www.esri.com.

Who wrote the metadata?

Dates:
Last modified: 18-Mar-2024
Metadata author:
Emily Himmelstoss
U.S. Geological Survey
Geologist
384 Woods Hole Road
Woods Hole, MA
USA

508-548-8700 x2262 (voice)
508-547-2310 (FAX)
whsc_data_contact@usgs.gov
Contact_Instructions:
The metadata contact email address is a generic address in the event the person is no longer with USGS. (updated on 20240318)
Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)
This page is <https://cmgds.marine.usgs.gov/catalog/whcmsc/open_file_report/ofr2010-1119/CapeCod_shorelines.shp.faq.html>
Generated by mp version 2.9.51 on Mon Mar 25 16:05:31 2024