Metadata: Identification_Information: Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 2021 Title: Location and analyses of sediment samples collected at Marconi Beach, Wellfleet during field activity 2021-022-FA on March 10, 2021 (ver. 2.0, December 2023) Edition: 2.0 Geospatial_Data_Presentation_Form: tabular digital data Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P9POZ9VH Publication_Information: Publication_Place: Woods Hole Coastal and Marine Science Center, Woods Hole, MA Publisher: U.S. Geological Survey, Coastal and Marine Hazards and Resources Program Online_Linkage: https://doi.org/10.5066/P9POZ9VH Online_Linkage: https://cmgds.marine.usgs.gov/data/field-activity-data/2021-022-FA/ Larger_Work_Citation: Citation_Information: Originator: J. Over Originator: C. Sherwood Originator: P. Traykovski Originator: E. Marsjanik Publication_Date: 2021 Title: Topographic and bathymetric data, sediment samples, structure from motion imagery, and reference mark data collected at Marconi Beach, Wellfleet in winter 2021, U.S. Geological Survey Field Activity 2021-022-FA (ver. 2.0, December 2023) Edition: 2.0 Geospatial_Data_Presentation_Form: tabular digital data Series_Information: Series_Name: data release Issue_Identification: DOI:10.5066/P9POZ9VH Publication_Information: Publication_Place: Reston, VA Publisher: U.S. Geological Survey Other_Citation_Details: Over, J.R., Sherwood, C.R., Traykovski, P., and E.E. Marsjanik, 2021, Topographic and bathymetric data, sediment samples, structure from motion imagery, and reference mark data collected at Marconi Beach, Wellfleet in winter 2021, U.S. Geological Survey Field Activity 2021-022-FA (ver. 2.0, December 2023): U.S. Geological Survey data release, https://doi.org/10.5066/P9POZ9VH. Online_Linkage: https://doi.org/10.5066/P9POZ9VH Description: Abstract: The data in this publication map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide regional context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. These data were collected as part of field activity 2021-022-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the beach. Starting in February and ending in March 2021, U.S. Geological Survey and Woods Hole Oceanographic Institution (WHOI) scientists conducted field surveys to collect position and orientation information for the CoastCam cameras and map the field of view. Two new reference marks were established in the Marconi Beach parking area to establish ground control for future surveys. Elevation data were collected using a real time kinematic – satellite navigation system (RTK-GNSS) receiver attached to a pole and walked on the beach. Point data of the beach face were collected along transects. Grain-size analysis was performed on sediment samples collected with a spade along multiple profiles from the bluff base to the intertidal zone. Aerial images of the beach for use in Structure-from-Motion were taken with a camera (Ricoh GRII) and a post-processed kinematic (PPK) system attached to a helium powered balloon-kite (Helikite) and high-precision GPS targets (AeroPoints) were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous survey vehicle. Agisoft Metashape (v. 1.7.2) was used to create a digital elevation model with the collected imagery, and this was merged with the bathymetry in MATLAB (v. 2020) to create a continuous topobathy product. Purpose: These sediment samples analyzed for grain-size composition will be used to describe the surficial substrates present in the study area. Supplemental_Information: For more information about the WHCMSC Field Activity, see https://cmgds.marine.usgs.gov/fan_info.php?fan=2021-022-FA. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20210310 Currentness_Reference: ground condition, data was collected on March 10. Status: Progress: Complete Maintenance_and_Update_Frequency: Not planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -69.96348873 East_Bounding_Coordinate: -69.96227385 North_Bounding_Coordinate: 41.89425657 South_Bounding_Coordinate: 41.89237661 Keywords: Theme: Theme_Keyword_Thesaurus: USGS Metadata Identifier Theme_Keyword: USGS:377b0c46-d7d4-4f12-894e-9cb7fbe2f555 Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: U.S. Geological Survey Theme_Keyword: USGS Theme_Keyword: Coastal and Marine Hazards and Resources Program Theme_Keyword: CMHRP Theme_Keyword: Woods Hole Coastal and Marine Science Center Theme_Keyword: WHCMSC Theme_Keyword: sediment samples Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: grain-size analysis Theme_Keyword: marine geology Theme_Keyword: geospatial datasets Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: oceans Theme_Keyword: geoscientificInformation Theme_Keyword: location Place: Place_Keyword_Thesaurus: Common geographic areas Place_Keyword: United States Place_Keyword: Wellfleet Place_Keyword: Massachusetts Place_Keyword: Cape Cod Access_Constraints: None Use_Constraints: Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey (USGS) as the source of this information. Although these data have been processed successfully on a computer system at the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data for other purposes, nor on all computer systems, nor shall the act of distribution constitute any such warranty. The USGS or the U.S. Government shall not be held liable for improper or incorrect use of the data described and/or contained herein. Not for navigational use. Point_of_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jin-Si Over Contact_Organization: U.S. Geological Survey Contact_Address: Address_Type: mailing and physical address Address: U.S. Geological Survey City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2269 Contact_Electronic_Mail_Address: jover@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: https://cmgds.marine.usgs.gov/data/field-activity-data/2021-022-FA/data/Samples/2021022FA_Marconi_sedsample_browse.jpg Browse_Graphic_File_Description: Sediment sample locations collected at Marconi Beach, Wellfleet MA Browse_Graphic_File_Type: JPEG Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: Laboratory analyses were conducted at USGS Woods Hole Coastal and Marine Science Center Sediment Laboratory using a Horiba laser diffraction (LA-960) size analyzer with manufacturer guaranteed accuracy of +/- 0.6%. Performance verified on every unit with NIST-traceable mono- and polydisperse size standards. Two samples have a low quality grade based on the information that the data do not resemble the analytical results from two replicates, see the comments in the data files. Logical_Consistency_Report: The location information was taken with a SP80 GNSS unit. The grain size data are the original files returned to the scientist after analysis in the Woods Hole Coastal and Marine Science Center, these data were checked and only modifications to the header titles have been made to the file. Some percentage values are greater than 100% as a result of the data processing equations and averaging multiple data runs per sample collected from the laser diffraction unit. Completeness_Report: Twenty sediment samples were collected and processed, ten in duplicate, and two in triplicate due to disagreeable results. Sample data with deviant values are included but have the following comment "Data do not resemble the analytical results from two replicates." Users are advised to read the rest of the metadata record carefully for additional details. A total of 34 sample analyses are found in the files. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Location information was taken with a Spectra SP80 GNSS RTK rover connected to the MASS CORS network with an estimated horizontal accuracy of 2 cm. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: Location information was taken with a Spectra SP80 GNSS RTK rover connected to the MASS CORS network with an estimated vertical accuracy of 2 cm. Lineage: Process_Step: Process_Description: Four samples were collected from the lowest exposed beach at low tide to the base of the bluff along five shore perpendicular profiles. Sand was collected with a small rectangular spade from the upper 2 cm of the beach and placed into a labeled plastic bag for grain-size analysis. Process_Date: 20210310 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jin-Si Over Contact_Organization: U.S Geological Survey Contact_Position: Geographer Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Rd City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-458-8700 x2297 Contact_Electronic_Mail_Address: jover@usgs.gov Process_Step: Process_Description: Samples submitted to the sediment analysis laboratory for grain size analysis using the Horiba laser diffraction unit (LA-960) and sieving of the ≥ -2 phi fraction are assigned unique analysis identifiers (ANALYSIS_ID) and divided into batches of no more than 30 samples. Each batch is entered into a Microsoft Excel data entry spreadsheet (LD Worksheet Template_xxxx.xlsx, where xxxx is the identifier CS16, which is assigned to the sample submission) to record the initial and dried sample weights, as well as the sieved coarse fraction weights. Each batch is also entered into macro-enabled Microsoft Excel data entry spreadsheets (GrainSizeWorksheet_LD1-30_xxxx(batch_yy).xlsm or GrainSizeWorksheet_LD31-600_xxxx(batch_yy).xlsm, where xxxx is the identifier assigned to the sample submission, "LD1-30" and "LD31-60" refer to the pre-labeled and weighed glass laser diffraction vials the samples will be run in, and "batch_yy" refers to the sample batch) to record the measurement data coming from the laser diffraction unit and incorporate the initial, dried, and sieved weights. About 20-30 grams of wet sediment are placed in a pre-weighed beaker and the gross weight is recorded. The sample is wet sieved through a 4 mm (No. 5) sieve. If there is any coarse fraction remaining in the sieve the coarse material is oven dried at 100C in a pre-weighed beaker and weighed again when dry. This coarse fraction is dry sieved to determine the individual weights of the -2 to -5 phi fractions, and the weights are recorded in the data entry spreadsheet LD Worksheet Template_xxxx.xlsx. The fine fraction in water is collected in a pre-labeled and weighed glass laser diffraction vial. If there is any coarse fraction remaining in the sieve from wet sieving, this vial is also oven dried at 100C and weighed when dry. If there is no coarse fraction remaining from wet sieving the sample can proceed directly to processing for analyses by the Horiba laser diffraction unit (LA-960). Fine fractions ready for analysis by the Horiba laser diffraction unit are rehydrated with distilled water if they have been dry. Fifteen (15) ml of pre-mixed 40 g/l sodium hexametaphosphate [(NaPO3)6] are added to each sample. If the height of the fluid in the laser diffraction vial is less than 5 cm more distilled water is added to raise the level to no more than 8 cm in the vial. The samples are gently stirred, covered, and allowed to soak for at least 1 hour (for samples that were not dried) up to 24 hours (for samples that were dried). Soaked vials are placed into an ultrasonic bath and run for 10 minutes at a frequency of 37 Hz with a power level of 100. If the samples appear to be fully disaggregated, they are placed into pre-determined autosampler locations, and are run using the Horiba LA-960 for Windows software to get the fine fraction grain size distributions. The fine fraction distribution data are added to the appropriate data entry spreadsheets (GrainSizeWorksheet_LD1-30_xxxx(batch_yy).xlsm or GrainSizeWorksheet_LD31-600_xxxx(batch_yy).xlsm). The spreadsheet is used to calculate a continuous phi class distribution from the original fractions. Process_Date: 20210414 Process_Step: Process_Description: Continuous phi class distribution from the original fractions are transposed to the "results" tab in the macro-enabled Microsoft Excel data entry workbook (GrainSizeWorksheet_LD1-30_xxxx(batch_yy).xlsm or GrainSizeWorksheet_LD31-600_xxxx(batch_yy).xlsm, "LD1-30" and "LD31-60" refer to the pre-labeled and weighed glass laser diffraction vials the samples will be run in, and "batch_yy" refer to the sample batch). Macros in the workbook ("GS_MoM_Arithmetic", "GS_statistics," and "sedimentname") are run to calculate grain size classification and statistical analyses and finish processing the data. Sample, navigation, and field identifiers, along with continuous phi class distribution data, grain size classification, and statistical analysis results are copied and pasted into a final Microsoft Excel spreadsheet (xxxx_GS-LD_results.xlsx). The processed data are quality control checked and assigned a quality grade based on the examination of the analytical data. Processed data are released to the submitter and incorporated into the laboratory's database. All raw analytical data generated by the samples are archived in the sediment analysis laboratory. Process_Date: 20210414 Process_Step: Process_Description: Version 2.0: Grain size data were reprocessed in September 2023 as part of a corrective action taken after an issue was identified in the Microsoft Excel data processing workbook (version 1.0) used to calculate grain size statistics and phi class distributions from raw data obtained from the Sediment Lab's Horiba LA-960 laser diffraction unit. Data coming from the instrument and weights recorded from sieving were not faulty. An error was found in a formula embedded in the workbook that translates data originally formatted in columns into rows. There are 96 bins of particle size distribution information recorded for each sample run on the instrument. The error resulted in a shifting of data by one bin (the values in bin number one in the column of data coming from the machine were translated into the position for bin number 2 in the corresponding row, and so on). Overall, the resulting data coming from version 1.0 of the processing workbook are affected by a slight shift in grainsize distribution. This error in the formula was corrected in September 2023 and a new version of the workbook (version 2.1) was generated and approved for use in the Sediment Lab. In addition, labeling for the logarithmic d10, d25, d75 and d90 headings was updated. Note the differing order of these values between Logarithmic and Arithmetic Method of Moments statistics. All affected grain size datasets using data from the laser diffraction unit have been reprocessed, reviewed, and prepared for release. Process_Date: 202309 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Brian Buczkowski Contact_Organization: U.S. Geological Survey Contact_Position: Lab Manager Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: (508) 548-8700 x2310 Contact_Electronic_Mail_Address: gs-wh_sedlab@usgs.gov Process_Step: Process_Description: The updated Excel file received from the sediment lab is provided and was renamed to 2021022FA_Marconi_sedsamples_v2.xlsx and then converted to a CSV with the same name. The CSV has data values with the established resolution in the attribute section below, the excel file has significant figures beyond the instrument precision. The CSV file column headers were also edited to be lowercase and modified slightly to facilitate readability and the shapefile conversion because Esri headers do not accept spaces, -, (), or /. The CSV file does not have the first row of the excel file that labels columns U-AC as “Methods of Moments Statistics – Logarithmic (phi)”, columns AD-AL as “Methods of Moments Statistics – Arithmetic (micrometers)”, and columns AM-BH as “Distribution (phi)”. Modifications not related to capitalization or changing spaces to underscores include T_DEPTH to T_depth_cm, B_DEPTH to B_depth_cm, DATE_COLLECTED to Collection_date, ANALYSIS COMPLETION DATE to Analysis_date, WEIGHT to weight_g, CLASSIFICATION (SHEPARD) to Classification, MEDIAN (D50) to D50, and QA/QC COMMENTS to Comments. Additional changes include adding _phi to the headers in columns U-AC, adding _um to the headers in columns AD-AL, and all minus signs were replaced with M. Using ArcPro 3.0.0, the CSV file was converted to a shapefile (2020015FA_truro_sedsamples_v2.shp) within ArcPro using the tool 'XY Table to Point' where the X Field was longitude and the Y Field was latitude. The coordinate system of the input coordinates was set to NAD83[2011]. All attributes from the grain-size analysis CSV are included in the shapefile but the headers only show the first 10 characters due to ArcPro limitations. Process_Date: 20231207 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jin-Si Over Contact_Organization: U.S Geological Survey Contact_Position: Geographer Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Rd City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-458-8700 x2269 Contact_Electronic_Mail_Address: jover@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Point Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point Point_and_Vector_Object_Count: 34 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 0.000000001 Longitude_Resolution: 0.000000001 Geographic_Coordinate_Units: Decimal degrees Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 (National Spatial Reference System 2011) Ellipsoid_Name: GRS_1980 Semi-major_Axis: 6378137.000000 Denominator_of_Flattening_Ratio: 298.257222 Vertical_Coordinate_System_Definition: Altitude_System_Definition: Altitude_Datum_Name: North American Vertical Datum of 1988 Altitude_Resolution: 0.001 Altitude_Distance_Units: meters Altitude_Encoding_Method: Explicit elevation coordinate included with horizontal coordinates Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_Label: 2021022FA_Marconi_sedsamples_v2.xlsx and 2021022FA_Marconi_sedsamples_v2.csv and 2021022FA_marconi_sedsamples_v2.shp Entity_Type_Definition: Data spreadsheet containing the grain size analysis results for sample submission CS16, analyzed using the Horiba laser diffraction unit and sieving of the ≥ -2 phi fraction. The attribute labels below refer to the CSV file headers but the attribute definitions are the same for each file. Entity_Type_Definition_Source: U.S. Geological Survey Attribute: Attribute_Label: Analysis_ID Attribute_Definition: An identifier for the sample which is unique to the database. This identifier begins with the assigned multi-letter code GS-, which corresponds to the type of analysis performed on the sample (grain size analysis), followed by a six-digit number assigned sequentially as samples are registered for analysis. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Unrepresentable_Domain: Character string. Attribute: Attribute_Label: Sample_ID Attribute_Definition: The identification value assigned to the sample at the time of collection. This varies from field activity to field activity and the ID can contain any combination of letters and numbers. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Unrepresentable_Domain: Character string. Attribute: Attribute_Label: Project Attribute_Definition: Name of project or project number under which samples were taken or data generated; sometimes project name indicates a more specific area. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Unrepresentable_Domain: Character string. Attribute: Attribute_Label: FAN Attribute_Definition: Field Activity Number. The serial number assigned to the dataset field activity from which the sample belongs. This value is in the format YYYY-XXX-FA where YYYY is the year, XXX is the number assigned to the activity within the year, and FA indicates Field Activity. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Unrepresentable_Domain: Character string. Attribute: Attribute_Label: Submitter Attribute_Definition: Name of Principal Investigator or Chief Scientist responsible for data collection (usually first initial and last name) when available. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Unrepresentable_Domain: Character string. Attribute: Attribute_Label: Area Attribute_Definition: General geographic area of data collection. Name is general enough to easily locate area on a state map. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Unrepresentable_Domain: Character string. Attribute: Attribute_Label: Latitude Attribute_Definition: Latitude coordinate, in decimal-degrees, of sample location in NAD83(2011). South latitude recorded as negative values. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 41.89237661 Range_Domain_Maximum: 41.89425657 Attribute_Units_of_Measure: Decimal degrees Attribute: Attribute_Label: Longitude Attribute_Definition: Longitude coordinate, in decimal degrees, of sample location in NAD83(2011). West longitude is recorded as negative values. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -69.96348873 Range_Domain_Maximum: -69.96227385 Attribute_Units_of_Measure: Decimal degrees Attribute: Attribute_Label: Depth_m Attribute_Definition: Measured elevation, in meters, relative to NAVD88 (geoid 18) of where the surface sample was taken Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -2.065 Range_Domain_Maximum: 5.322 Attribute_Units_of_Measure: meters Attribute: Attribute_Label: T_depth_cm Attribute_Definition: Top depth of sample, in centimeters, below the sediment-air interface. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: centimeters Attribute: Attribute_Label: B_depth_cm Attribute_Definition: Bottom depth of sample, in centimeters, below the sediment-air interface. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2 Range_Domain_Maximum: 2 Attribute_Units_of_Measure: centimeters Attribute: Attribute_Label: Device Attribute_Definition: Device used to collect the sample. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Sampling scoop Enumerated_Domain_Value_Definition: sample collected by hand with specialized trowel Enumerated_Domain_Value_Definition_Source: U.S. Geological Survey Attribute: Attribute_Label: Collection_date Attribute_Definition: Calendar date indicating when the sample was collected in the format MM/DD/YYYY where DD is the day of the month, MM is the numeric month, and YYYY is the year. Entries with no date indicated are left blank. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Unrepresentable_Domain: Character set Attribute: Attribute_Label: Analysis_date Attribute_Definition: Calendar date indicating when the sample was analyzed in the format MM/DD/YYYY where DD is the day of the month, MM is the numeric month, and YYYY is the year. Entries with no date indicated are left blank. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Unrepresentable_Domain: Character set Attribute: Attribute_Label: Weight_g Attribute_Definition: Weight of wet sample in grams. Resolution is based on instrumental precision. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 13.1855 Range_Domain_Maximum: 23.6732 Attribute_Units_of_Measure: grams Attribute_Measurement_Resolution: 0.0001 Attribute: Attribute_Label: Gravel_PCT Attribute_Definition: Gravel content in percent dry weight of the sample (particles with nominal diameters greater than 2 mm; -1 phi and larger). Resolution is based on instrumental precision. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 17.5594 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.0001 Attribute: Attribute_Label: Sand_PCT Attribute_Definition: Sand content in percent dry weight of the sample (particles with nominal diameters less than 2 mm, but greater than or equal to 0.0625 mm; 0 phi through 4 phi). Resolution is based on instrumental precision. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0000 Range_Domain_Maximum: 100.0025 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.0001 Attribute: Attribute_Label: Silt_PCT Attribute_Definition: Silt content in percent dry weight of the sample (particles with nominal diameters less than 0.0625 mm, but greater than or equal to 0.004 mm; 5 phi through 8 phi, inclusive). Resolution is based on instrumental precision. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0000 Range_Domain_Maximum: 72.005 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.0001 Attribute: Attribute_Label: Clay_PCT Attribute_Definition: Clay content in percent dry weight of the sample (particles with nominal diameters less than 0.004 mm; less than 8 phi). Resolution is based on instrumental precision. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.0000 Range_Domain_Maximum: 27.9970 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.0001 Attribute: Attribute_Label: Classification Attribute_Definition: Sediment description based on rigorous definition according to Shepard (1954) as modified by Schlee and Webster (1967), Schlee (1973), and Poppe and others (2014). These values represent the values as defined in the USGS East Coast Sediment Texture Database data dictionary that are present in this dataset. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: gravelly sediment Enumerated_Domain_Value_Definition: gravel equal to or greater than 10 percent, but less than 50 percent Enumerated_Domain_Value_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: sand Enumerated_Domain_Value_Definition: sand equal to or greater than 75 percent Enumerated_Domain_Value_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: clayey silt Enumerated_Domain_Value_Definition: silt less than 75 percent and equal to or greater than 50 percent, clay is greater than sand, and sand less than 20 percent Enumerated_Domain_Value_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute: Attribute_Label: Mean_Phi Attribute_Definition: Average value in the grain size distribution in phi units using logarithmic method of moments. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.31 Range_Domain_Maximum: 7.56 Attribute_Units_of_Measure: phi Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: StDev_Phi Attribute_Definition: Standard deviation (root mean square of the deviations) of the grain size distribution using logarithmic method of moments. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.41 Range_Domain_Maximum: 1.77 Attribute_Units_of_Measure: phi Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: Skewness_Phi Attribute_Definition: Skewness (unitless deviation from symmetrical form) of the grain size distribution using logarithmic method of moments. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.48 Range_Domain_Maximum: 4.88 Attribute_Units_of_Measure: phi Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: Kurtosis_Phi Attribute_Definition: Kurtosis (unitless degree of curvature near the mode) of the grain size distribution using logarithmic method of moments. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 2.40 Range_Domain_Maximum: 49.44 Attribute_Units_of_Measure: phi Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D90_Phi Attribute_Definition: Diameter at which 90% of the sample mass is comprised of sediment particles with a diameter less than this value using logarithmic method of moments. Attribute_Definition_Source: U.S Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -2.38 Range_Domain_Maximum: 6.42 Attribute_Units_of_Measure: phi Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D75_Phi Attribute_Definition: Diameter at which 75% of the sample mass is comprised of sediment particles with a diameter less than this value using logarithmic method of moments. Attribute_Definition_Source: U.S Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.84 Range_Domain_Maximum: 7.05 Attribute_Units_of_Measure: phi Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D50_Phi Attribute_Definition: Diameter at which 50% of the sample mass is comprised of sediment particles with a diameter less than this value and 50% is larger; middle point (median) in the grain size distribution using logarithmic method of moments. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.31 Range_Domain_Maximum: 7.56 Attribute_Units_of_Measure: phi Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D25_Phi Attribute_Definition: Diameter at which 25% of the sample mass is comprised of sediment particles with a diameter less than this value using logarithmic method of moments. Attribute_Definition_Source: U.S Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.44 Range_Domain_Maximum: 8.11 Attribute_Units_of_Measure: phi Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D10_Phi Attribute_Definition: Diameter at which 10% of the sample mass is comprised of sediment particles with a diameter less than this value using logarithmic method of moments. Attribute_Definition_Source: U.S Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0.83 Range_Domain_Maximum: 8.68 Attribute_Units_of_Measure: phi Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: Mean_um Attribute_Definition: Average value in the grain size distribution using arthmetic method of moments. Attribute_Definition_Source: U.S Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.76 Range_Domain_Maximum: 2049.12 Attribute_Units_of_Measure: microns Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: StDev_um Attribute_Definition: Standard deviation (root mean square of the deviations) of the grain size distribution using arithmetic method of moments. Attribute_Definition_Source: USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.43 Range_Domain_Maximum: 2696.04 Attribute_Units_of_Measure: microns Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: Skewness_um Attribute_Definition: Skewness (unitless deviation from symmetrical form) of the grain size distribution using arithmetic method of moments. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: -0.09 Range_Domain_Maximum: 5.41 Attribute_Units_of_Measure: microns Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: Kurtosis_um Attribute_Definition: Kurtosis (unitless degree of curvature near the mode) of the grain size distribution using arithmetic method of moments. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.88 Range_Domain_Maximum: 33.75 Attribute_Units_of_Measure: microns Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D10_um Attribute_Definition: Diameter at which 10% of the sample mass is comprised of sediment particles with a diameter less than this value using arithmetic method of moments. Attribute_Definition_Source: U.S Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 3.08 Range_Domain_Maximum: 683.07 Attribute_Units_of_Measure: microns Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D25_um Attribute_Definition: Diameter at which 25% of the sample mass is comprised of sediment particles with a diameter less than this value using arithmetic method of moments. Attribute_Definition_Source: U.S Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 4.26 Range_Domain_Maximum: 859.76 Attribute_Units_of_Measure: microns Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D50_um Attribute_Definition: Diameter at which 50% of the sample mass is comprised of sediment particles with a diameter less than this value and 50% is larger; middle point (median) in the grain size distribution using arithmetic method of moments. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 6.06 Range_Domain_Maximum: 1249.89 Attribute_Units_of_Measure: microns Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D75_um Attribute_Definition: Diameter at which 75% of the sample mass is comprised of sediment particles with a diameter less than this value using arithmetic method of moments. Attribute_Definition_Source: U.S Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 8.50 Range_Domain_Maximum: 1707.08 Attribute_Units_of_Measure: microns Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: D90_um Attribute_Definition: Diameter at which 90% of the sample mass is comprised of sediment particles with a diameter less than this value using arithmetic method of moments. Attribute_Definition_Source: U.S Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 11.366 Range_Domain_Maximum: 5526.16 Attribute_Units_of_Measure: microns Attribute_Measurement_Resolution: 0.01 Attribute: Attribute_Label: Phi_16 Attribute_Definition: 16 phi: weight percent of the sample in the 16 phi fraction and smaller (nominal diameter of particles greater than or equal to 0.000015625 mm, less than 0.00003125 mm); colloid. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_15 Attribute_Definition: 15 phi: weight percent of the sample in the 15 phi fraction (nominal diameter of particles greater than or equal to 0.00003125 mm, less than 0.0000625 mm); colloid. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_14 Attribute_Definition: 14 phi: weight percent of the sample in the 14 phi fraction (nominal diameter of particles greater than or equal to 0.0000625 mm, less than 0.000125 mm); colloid. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_13 Attribute_Definition: 13 phi: weight percent of the sample in the 13 phi fraction (nominal diameter of particles greater than or equal to 0.000125 mm, less than 0.00025 mm); fine clay. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_12 Attribute_Definition: 12 phi: weight percent of the sample in the 12 phi fraction (nominal diameter of particles greater than or equal to 0.00025 mm, but less than 0.0005 mm); fine clay. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_11 Attribute_Definition: 11 phi: weight percent of the sample in the 11 phi fraction (nominal diameter of particles greater than or equal to 0.0005 mm, but less than 0.001 mm); fine clay. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_10 Attribute_Definition: 10 phi: weight percent of the sample in the 10 phi fraction (nominal diameter of particles greater than or equal to 0.001 mm, but less than 0.002 mm); medium clay. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 1.648 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_9 Attribute_Definition: 9 phi: weight percent of the sample in the 9 phi fraction (nominal diameter of particles greater than or equal to 0.002 mm, but less than 0.004 mm); coarse clay. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 26.349 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_8 Attribute_Definition: 8 phi: weight percent of the sample in the 8 phi fraction (nominal diameter of particles greater than or equal to 0.004 mm, but less than 0.008 mm); very fine silt. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 49.626 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_7 Attribute_Definition: 7 phi: weight percent of the sample in the 7 phi fraction (nominal diameter of particles greater than or equal to 0.008 mm, but less than 0.016 mm); fine silt. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 21.248 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_6 Attribute_Definition: 6 phi: weight percent of the sample in the 6 phi fraction (nominal diameter of particles greater than or equal to 0.016 mm, but less than 0.031 mm); medium silt. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 1.132 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_5 Attribute_Definition: 5 phi: weight percent of the sample in the 5 phi fraction (nominal diameter of particles greater than or equal to 0.031 mm, but less than 0.0625 mm); coarse silt. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.271 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_4 Attribute_Definition: 4 phi: weight percent of the sample in the 4 phi fraction (nominal diameters of particles greater than or equal to .0625 mm, but less than 0.125 mm); very fine sand. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0.923 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_3 Attribute_Definition: 3 phi: weight percent of the sample in the 3 phi fraction (nominal diameter of particles greater than or equal to 0.125 mm, but less than 0.25 mm); fine sand. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 1.002 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_2 Attribute_Definition: 2 phi: weight percent of the sample in the 2 phi fraction (nominal diameter of particles greater than or equal to 0.25 mm, but less than 0.5 mm); medium sand. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 30.605 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_1 Attribute_Definition: 1 phi: weight percent of the sample in the 1 phi fraction (nominal diameter of particles greater than or equal to 0.5 mm, but less than 1 mm); coarse sand. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 83.076 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_0 Attribute_Definition: 0 phi: weight percent of the sample in the 0 phi fraction (nominal diameters of particles greater than or equal to 1 mm, but less than 2 mm); very coarse sand. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 52.969 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_M1 Attribute_Definition: -1 phi: weight percent of the sample in the -1 phi fraction (nominal diameter of particles greater than or equal to 2 mm, but less than 4 mm); very fine pebbles (granules). M is for minus. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 4.965 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_M2 Attribute_Definition: -2 phi: weight percent of the sample in the -2 phi fraction (nominal diameter of particles greater than or equal to 4 mm, but less than 8 mm); fine pebbles. M is for minus. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 6.800 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_M3 Attribute_Definition: -3 phi: weight percent of the sample in the -3 phi fraction (nominal diameter of particles greater than or equal to 8 mm, but less than 16 mm); medium pebbles. M is for minus. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 5.794 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_M4 Attribute_Definition: -4 phi: weight percent of the sample in the -4 phi fraction (nominal diameter of particles greater than or equal to 16 mm, but less than 32 mm); coarse pebbles. M is for minus. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_M5 Attribute_Definition: -5 phi: weight percent of the sample in the -5 phi fraction (nominal diameter of particles greater than or equal to 32 mm, but less than 64 mm); very coarse pebbles. M is for minus. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: 0.001 Attribute: Attribute_Label: Phi_M6 Attribute_Definition: -6 phi: weight percent of the sample in the -6 phi fraction and larger (nominal diameter of particles greater than or equal to 64 mm, but less than 128 mm); cobbles. M is for minus. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Range_Domain: Range_Domain_Minimum: 0 Range_Domain_Maximum: 0 Attribute_Units_of_Measure: weight percent Attribute_Measurement_Resolution: .001 Attribute: Attribute_Label: Analyst Attribute_Definition: Name (usually first, middle, and last initials) of person who performed the grain size or physical properties analysis. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Unrepresentable_Domain: Character set Attribute: Attribute_Label: Quality_grade Attribute_Definition: Samples are assigned a quality grade based on the examination of the analytical data. Data quality grades may be determined by several factors, such as consistency with samples collected from a geospatially adjacent location and consistency between replicate runs, and any comments or notes that indicate the data for a particular sample may be suspect are included in the results table for that sample under "comments". When considering replicate run values, if there is over a 10% difference between relative fraction percentages in this sample and the replicate, a quality grade of B will be assigned, over 15% would be assigned a C, and over 20% would be assigned a D. Quality grades for sample data that do not have any additional comments are assigned based on the calculated percent difference between the weights of the coarse fraction remaining after wet sieving and the sum of all of the weighed fractions after dry sieving the coarse fraction, indicating an estimated differing amount of material which could skew the calculated grain size results: A = percent differences between 0% and ±1.5%, B = percent differences between ±1.5% and ±3%, C = percent differences between ±3% and ±4.5%, and D = percent differences greater than ±4.5%. The quality grade is followed by a hyphen and the initials of the person who assigned the grade: BJB is Brian J Buczkowski; JDC is Jason D Chaytor; SJW is Sarah J Widlansky. Attribute_Definition_Source: modified from USGS East Coast Sediment Texture Database data dictionary Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: A Enumerated_Domain_Value_Definition: Percent differences between 0% and ±1.5%, there is less than 10% difference in relative fraction percentages between this sample and the replicate, or the results are consistent with expected values. Enumerated_Domain_Value_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: B Enumerated_Domain_Value_Definition: Percent differences between ±1.5% and ±3%, there is greater than 10% and less than 15% difference in relative fraction percentages between this sample and the replicate, or the results are generally consistent with expected values. Enumerated_Domain_Value_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C Enumerated_Domain_Value_Definition: Percent differences between ±3% and ±4.5%, there is greater than 15% and less than 20% difference in relative fraction percentages between this sample and the replicate, or the results are somewhat consistent with expected values. Enumerated_Domain_Value_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: D Enumerated_Domain_Value_Definition: Percent differences greater than ±4.5%, there is greater than 20% difference in relative fraction percentages between this sample and the replicate, or the results are inconsistent with expected values. Enumerated_Domain_Value_Definition_Source: U.S. Geological Survey Attribute: Attribute_Label: Comments Attribute_Definition: Relevant comments on analytical observations or anomalies that may affect the quality of the data. Entries with no comments are left blank. Attribute_Definition_Source: U.S. Geological Survey Attribute_Domain_Values: Unrepresentable_Domain: Character set Overview_Description: Entity_and_Attribute_Overview: The first row of the spreadsheet is the column heading in the CSV, see the Process Steps for information in the naming conventions. Trailing and leading zeros may not appear in the csv and so some values may not display as many significant digits as described. Attribute resolutions beyond the hundredths place are reported based on instrument precision and may not reflect meaningful significant figures when used in the interpretation of the sediment samples. The replicates are included in the shapefile so that there are two points at each sample location. Entity_and_Attribute_Detail_Citation: U.S. Geological Survey East-Coast Sediment Texture Database: http://woodshole.er.usgs.gov/project-pages/sediment/ Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Jin-Si Over Contact_Position: Geographer Contact_Address: Address_Type: mailing and physical address Address: 384 Woods Hole Road City: Woods Hole State_or_Province: MA Postal_Code: 02543-1528 Contact_Voice_Telephone: 508-458-8700 x2269 Contact_Electronic_Mail_Address: jover@usgs.gov Resource_Description: 2021022FA_Marconi_sedsamples_v2.zip contains the updated sediment sample analysis data in three formats; a CSV file (2021022FA_Marconi_sedsamples_v2.csv), Excel File (2021022FA_Marconi_sedsamples_v2.xlsx), and a shapefile (2021022FA_marconi_sedsamples.shp and additional files that make up a shapefile) Total download size is 49KB. Distribution_Liability: Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data for other purposes, nor on all computer systems, nor shall the act of distribution constitute any such warranty. Although these data have been processed successfully on a computer system at the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data for other purposes, nor on all computer systems, nor shall the act of distribution constitute any such warranty. The USGS or the U.S. Government shall not be held liable for improper or incorrect use of the data described and/or contained herein. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: XLSX Format_Version_Number: Excel Office 365 16.01 Format_Information_Content: The Excel file was distributed by the Woods Hole Sediment Analysis Laboratory. Transfer_Size: 0.039 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://cmgds.marine.usgs.gov/data/field-activity-data/2021-022-FA/data/Samples/2021022FA_Marconi_sedsamples_v2.zip Network_Resource_Name: https://cmgds.marine.usgs.gov/data/field-activity-data/2021-022-FA/ Network_Resource_Name: https://doi.org/10.5066/P9POZ9VH Access_Instructions: The first link in the list above is to directly download the zip file, not just the XLSX file, the second to the field data page, and the third link is to the publication landing page. Digital_Form: Digital_Transfer_Information: Format_Name: CSV Format_Information_Content: Comma Separated Variable (CSV) file created and edited from the XLSX file. Transfer_Size: 0.019 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://cmgds.marine.usgs.gov/data/field-activity-data/2021-022-FA/data/Samples/2021022FA_Marconi_sedsamples_v2.zip Network_Resource_Name: https://cmgds.marine.usgs.gov/data/field-activity-data/2021-022-FA Network_Resource_Name: https://doi.org/10.5066/P9POZ9VH Access_Instructions: The first link in the list above is to directly download the zip file, not just the CSV file, the second to the field data page, and the third link is to the publication landing page. Digital_Form: Digital_Transfer_Information: Format_Name: SHP Format_Information_Content: Esri shapefile (.shp) and associated files created by importing the CSV file into ArcPro (v. 3.0.0) Transfer_Size: 0.147 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: https://cmgds.marine.usgs.gov/data/field-activity-data/2021-022-FA/data/Samples/2021022FA_Marconi_sedsamples_v2.zip Network_Resource_Name: https://cmgds.marine.usgs.gov/data/field-activity-data/2021-022-FA Network_Resource_Name: https://doi.org/10.5066/P9POZ9VH Access_Instructions: The first link in the list above is to directly download the zip file, not just the shapefile, the second to the field data page, and the third link is to the publication landing page. Fees: None. Technical_Prerequisites: The zip file contains data in XLSX, CSV, and Esri shapefile formats. The user must have software capable of uncompressing the zip file and reading the data formats. Metadata_Reference_Information: Metadata_Date: 20231213 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jin-Si Over Contact_Organization: U.S. Geological Survey Contact_Position: Geographer Contact_Address: Address_Type: mailing and physical Address: U.S. Geological Survey Address: 384 Woods Hole Rd. City: Woods Hole State_or_Province: MA Postal_Code: 02543-1598 Contact_Voice_Telephone: 508-548-8700 x2269 Contact_Electronic_Mail_Address: whsc_data_contact@usgs.gov Contact_Instructions: The metadata contact email address is a generic address in the event the person is no longer with USGS. Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Access_Constraints: None Metadata_Use_Constraints: None