H11077_MB1.5M_UTM19.TIF: Color Shaded-Relief GeoTIFF Image Showing the 1.5-m Bathymetry Generated from National Oceanic and Atmospheric Administration (NOAA) Survey H11077 in Woods Hole, MA (UTM Zone 19)

Metadata also available as Outline | Text

Frequently-anticipated questions:

What does this data set describe?

Title:
H11077_MB1.5M_UTM19.TIF: Color Shaded-Relief GeoTIFF Image Showing the 1.5-m Bathymetry Generated from National Oceanic and Atmospheric Administration (NOAA) Survey H11077 in Woods Hole, MA (UTM Zone 19)
Abstract:
The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Massachusetts Office of Coastal Zone Management (MA CZM), is producing detailed geologic maps of the coastal sea floor. Imagery, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities along this part of the Massachusetts coastline, shows the composition and terrain of the seabed, and provides information on sediment transport and benthic habitat. Interpretive data layers were derived from multibeam echo-sounder and sidescan-sonar data collected in the vicinity of Woods Hole, a passage between the Elizabeth Islands and Cape Cod, Massachusetts. In November 2007, bottom photographs, seismic-reflection profiles, and surficial sediment data were acquired as part of a ground-truth reconnaissance survey.
  1. How should this data set be cited?

    National Oceanic and Atmospheric Administration, and U.S. Geological Survey, 2008, H11077_MB1.5M_UTM19.TIF: Color Shaded-Relief GeoTIFF Image Showing the 1.5-m Bathymetry Generated from National Oceanic and Atmospheric Administration (NOAA) Survey H11077 in Woods Hole, MA (UTM Zone 19): Open-File Report 2008-1004, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    Poppe, L.J., McMullen, K.Y., Foster, D.S., Blackwood, D.S., Williams, S.J., Ackerman, S.D., Barnum, S.R., and Brennan, R.T., 2008, Sea-Floor Character and Sedimentary Processes in the Vicinity of Woods Hole, Massachusetts: Open-File Report 2008-1004, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center, Woods Hole, MA.

    Online Links:

  2. What geographic area does the data set cover?

    West_Bounding_Coordinate: -70.682070
    East_Bounding_Coordinate: -70.654063
    North_Bounding_Coordinate: 41.529108
    South_Bounding_Coordinate: 41.505899

  3. What does it look like?

    <http://pubs.usgs.gov/of/2008/1004/data/bathy/geotifs/utm/1.5m/h11077_mb1.5m_utm19.gif> (GIF)
    Thumbnail image showing the color-encoded GeoTIFF of the 1.5-m bathymetry collected during NOAA survey H11077

  4. Does the data set describe conditions during a particular time period?

    Beginning_Date: 05-Sep-2001
    Ending_Date: 09-Sep-2001
    Currentness_Reference: ground condition

  5. What is the general form of this data set?

    Geospatial_Data_Presentation_Form: remote-sensing image

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

      This is a Raster data set. It contains the following raster data types:

      • Dimensions 1688 x 1525 x 1, type Pixel

    2. What coordinate system is used to represent geographic features?

      Grid_Coordinate_System_Name: Universal Transverse Mercator
      Universal_Transverse_Mercator:
      UTM_Zone_Number: 19
      Transverse_Mercator:
      Scale_Factor_at_Central_Meridian: 0.999600
      Longitude_of_Central_Meridian: -69.000000
      Latitude_of_Projection_Origin: 0.000000
      False_Easting: 500000.000000
      False_Northing: 0.000000

      Planar coordinates are encoded using row and column
      Abscissae (x-coordinates) are specified to the nearest 1.500984
      Ordinates (y-coordinates) are specified to the nearest 1.500889
      Planar coordinates are specified in meters

      The horizontal datum used is North American Datum of 1983.
      The ellipsoid used is Geodetic Reference System 80.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257222.

  7. How does the data set describe geographic features?

    Entity_and_Attribute_Overview:
    There are no attributes associated with the GeoTIFF image. Pixel values convey RGB values of individual cells.

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

  2. Who also contributed to the data set?

  3. To whom should users address questions about the data?

    U.S. Geological Survey
    c/o Larry Poppe
    Geologist
    384 Woods Hole Road
    Woods Hole, MA 02543-1598
    USA

    (508) 548-8700 x2314 (voice)
    (508) 457-2310 (FAX)
    lpoppe@usgs.gov

Why was the data set created?

To release a color GeoTIFF image of the 1.5-m bathymetry generated from NOAA survey H11077 in Woods Hole, Massachusetts in UTM Zone 19, NAD83.

How was the data set created?

  1. From what previous works were the data drawn?

    (source 1 of 1)
    .

    Type_of_Source_Media: DVD-ROM
    Source_Contribution: The original processed multibeam bathymetric data.

  2. How were the data generated, processed, and modified?

    Date: Unknown (process 1 of 1)
    The multibeam data were acquired in XTF (extended Triton data format) and recorded digitally through an ISIS data acquisition system. A Reson 8101 echosounder hull-mounted on a 29' launch deployed from the NOAA ship Whiting was used to acquire the sounding data. These data were processed using CARIS HIPS (Hydrographic Image Processing System) software for quality control, to incorporate sound velocity and tidal corrections, and to produce a base surface at 1.5-m resolution. Sound velocity corrections were derived using frequent SEACAT CTD (conductivity-temperature-depth) profiles. Typically, a CTD cast was conducted every four to six hours of multibeam acquisition. Tidal zone corrections were calculated from data acquired at the Nantucket tidal gauge. The vertical resolution of the multibeam data is approximately 0.5% of the water depth. The base surface was hill shaded (sun illuminated) with the sun at an azimuth of 315, an altitude angle above the horizon of 45, a vertical exaggeration of 5x , and color encoded by depth with a continous color pallete in CARIS HIPS. The data were then exported in GeoTIFF (.tif) format in UTM Zone 19, NAD83.

    Person who carried out this activity:

    National Oceanic and Atmospheric Administration
    c/o Rick Brennan
    1315 East West Highway
    Silver Spring, MD 20910
    USA

    301-713-2653 x152 (voice)
    richard.t.brennan@noaa.gov

    Data sources produced in this process:
    • h11077_mb1.5m_utm19.tif

  3. What similar or related data should the user be aware of?

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

  2. How accurate are the geographic locations?

    Navigation was by differential GPS

  3. How accurate are the heights or depths?

  4. Where are the gaps in the data? What is missing?

    All collected data were processed and used to produce this dataset.

  5. How consistent are the relationships among the observations, including topology?

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access_Constraints: None
Use_Constraints:
Data are not to be used for navigation purposes.

Public domain data are freely redistributable with proper metadata and source attribution. Please recognize the National Oceanic and Atmospheric Administration (NOAA) and U.S. Geological Survey (USGS) as the originators of this information.

  1. Who distributes the data set? (Distributor 1 of 1)

    U.S. Geological Survey
    c/o Larry Poppe
    Geologist
    384 Woods Hole Road
    Woods Hole, MA 02543-1598
    USA

    (508) 548-8700 x2314 (voice)
    (508) 457-2310 (FAX)
    lpoppe@usgs.gov

  2. What's the catalog number I need to order this data set?

    Downloadable Data

  3. What legal disclaimers am I supposed to read?

    This dataset has been approved for release and publication by the USGS. Although it has been subjected to rigorous review and is substantially complete, the USGS reserves the right to revise the data pursuant to further analysis and review. Furthermore, it is released on condition that neither the U.S. Government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights.

    Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.

  4. How can I download or order the data?

  5. What hardware or software do I need in order to use the data set?

    This image is available as a GeoTIFF image with an accompanying world file. To utilize this data, the user must have an image viewer, image processing or GIS software package capable of importing a GeoTIFF image.

Who wrote the metadata?

Dates:
Last modified: 31-Mar-2008
Metadata author:
Larry Poppe
U.S. Geological Survey
Geologist
384 Woods Hole Road
Woods Hole, MA 02543-1598
USA

(508) 548-8700 x2314 (voice)
(508) 457-2310 (FAX)
lpoppe@usgs.gov

Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)
Metadata extensions used:

Generated by mp version 2.8.6 on Mon Mar 31 13:24:31 2008