H11077_0.5MUTM19_XYZ.TXT: 0.5-m Bathymetry from National Oceanic and Atmospheric Administration (NOAA) Survey H11077 of the Sea Floor in the Vicinity of Woods Hole, Massachusetts (UTM Zone 19)

Metadata also available as Outline | Text

Frequently-anticipated questions:

What does this data set describe?

Title:
H11077_0.5MUTM19_XYZ.TXT: 0.5-m Bathymetry from National Oceanic and Atmospheric Administration (NOAA) Survey H11077 of the Sea Floor in the Vicinity of Woods Hole, Massachusetts (UTM Zone 19)
Abstract:
The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Massachusetts Office of Coastal Zone Management (MA CZM), is producing detailed geologic maps of the coastal sea floor. Imagery, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities along this part of the Massachusetts coastline, shows the composition and terrain of the seabed, and provides information on sediment transport and benthic habitat. Interpretive data layers were derived from multibeam echo-sounder and sidescan-sonar data collected in the vicinity of Woods Hole, a passage between the Elizabeth Islands and Cape Cod, Massachusetts. In November 2007, bottom photographs, seismic-reflection profiles, and surficial sediment data were acquired as part of a ground-truth reconnaissance survey.
  1. How should this data set be cited?

    National Oceanic and Atmospheric Administration, 2008, H11077_0.5MUTM19_XYZ.TXT: 0.5-m Bathymetry from National Oceanic and Atmospheric Administration (NOAA) Survey H11077 of the Sea Floor in the Vicinity of Woods Hole, Massachusetts (UTM Zone 19): Open-File Report 2008-1004, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    Poppe, L.J., McMullen, K.Y., Foster, D.S., Blackwood, D.S., Williams, S.J., Ackerman, S.D., Barnum, S.R., and Brennan, R.T., 2008, Sea-Floor Character and Sedimentary Processes in the Vicinity of Woods Hole, Massachusetts: Open-File Report 2008-1004, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center, Woods Hole, MA.

    Online Links:

  2. What geographic area does the data set cover?

    West_Bounding_Coordinate: -70.682064
    East_Bounding_Coordinate: -70.654075
    North_Bounding_Coordinate: 41.529103
    South_Bounding_Coordinate: 41.505909

  3. What does it look like?

    <http://pubs.usgs.gov/of/2008/1004/data/bathy/grids/utm/asciigrid/h11077_0.5mutm19_xyz.gif> (GIF)
    Thumbnail image showing the extent of soundings collected during NOAA survey H11077

  4. Does the data set describe conditions during a particular time period?

    Beginning_Date: 05-Sep-2001
    Ending_Date: 09-Sep-2001
    Currentness_Reference: ground condition

  5. What is the general form of this data set?

    Geospatial_Data_Presentation_Form: tabular digital data

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

      This is a Point data set.

    2. What coordinate system is used to represent geographic features?

      Grid_Coordinate_System_Name: Universal Transverse Mercator
      Universal_Transverse_Mercator:
      UTM_Zone_Number: 19
      Transverse_Mercator:
      Scale_Factor_at_Central_Meridian: 0.999600
      Longitude_of_Central_Meridian: -69.000000
      Latitude_of_Projection_Origin: 0.000000
      False_Easting: 500000.000000
      False_Northing: 0.000000

      Planar coordinates are encoded using coordinate pair
      Planar coordinates are specified in meters

      The horizontal datum used is North American Datum of 1983.
      The ellipsoid used is Geodetic Reference System 80.

      Vertical_Coordinate_System_Definition:
      Altitude_System_Definition:
      Depth_System_Definition:
      Depth_Datum_Name: Mean lower low water
      Depth_Distance_Units: meters
      Depth_Encoding_Method: Explicit depth coordinate included with horizontal coordinates

  7. How does the data set describe geographic features?

    Entity_and_Attribute_Overview:
    Three space separated values per record. Value one is the eastings coordinate in meters of the ship coordinate; value 2 is the northings coordinate in meters the ship's coordinate; value three is the acquired depth value. The depth value is recorded in meters as a positive value.

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

  2. Who also contributed to the data set?

  3. To whom should users address questions about the data?

    U.S. Geological Survey
    c/o Lawrence Poppe
    Geologist
    384 Woods Hole Road
    Woods Hole, MA 02543-1598
    USA

    (508) 548-8700 x2314 (voice)
    (508) 457-2310 (FAX)
    lpoppe@usgs.gov

Why was the data set created?

To release the ASCII file containing the 0.5-m horizontally spaced bathymetry generated from NOAA survey H11077 in the vicinity of Woods Hole, Massachusetts.

How was the data set created?

  1. From what previous works were the data drawn?

    (source 1 of 1)
    .

    Type_of_Source_Media: DVD-ROM
    Source_Contribution: The original processed multibeam bathymetric data.

  2. How were the data generated, processed, and modified?

    Date: Unknown (process 1 of 1)
    The multibeam data were acquired in XTF (extended Triton data format) and recorded digitally through an ISIS data acquisition system. A Reson 8101 echosounder hull-mounted on a 29' launch deployed from the NOAA ship Whiting was used to acquire the sounding data. These data were processed using CARIS HIPS (Hydrographic Image Processing System) software for quality control, to incorporate sound velocity and tidal corrections, and to produce a base surface at 0.5-m horizontal resolution. Sound velocity corrections were derived using frequent SEACAT CTD (conductivity-temperature-depth) profiles. Typically, a CTD cast was conducted every four to six hours of multibeam acquisition. Tidal zone corrections were calculated from data acquired at the Nantucket tidal gauge. The vertical resolution of the multibeam data is approximately 0.5% of the water depth. The vertical resolution of the multibeam data is approximately 0.5% of the water depth. The data were gridded to 0.5-m resolution and exported in text (.txt) format. Vertical datum is mean lower low water; X and Y units are meters; UTM Zone 19, NAD83.

    Person who carried out this activity:

    National Oceanic and Atmospheric Administration
    c/o Rick Brennan
    Field Operations Officer
    1315 East West Highway
    Silver Spring, MD 20910
    USA

    301-713-2653 x152 (voice)
    richard.t.brennan@noaa.gov

    Data sources produced in this process:
    • h11077_0.5mutm19.xyz.txt

  3. What similar or related data should the user be aware of?

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

  2. How accurate are the geographic locations?

    Navigation was by differential GPS

  3. How accurate are the heights or depths?

  4. Where are the gaps in the data? What is missing?

    All collected data were processed and used to produce this dataset.

  5. How consistent are the relationships among the observations, including topology?

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access_Constraints: None
Use_Constraints:
Data are not to be used for navigation purposes.

Public domain data are freely redistributable with proper metadata and source attribution. Please recognize the National Oceanic and Atmospheric Administration (NOAA) as the originator of this information.

  1. Who distributes the data set? (Distributor 1 of 1)

    U.S. Geological Survey
    c/o Larry Poppe
    Geologist
    384 Woods Hole Road
    Woods Hole, MA 02543-1598
    USA

    (508) 548-8700 x2314 (voice)
    (508) 457-2310 (FAX)
    lpoppe@usgs.gov

  2. What's the catalog number I need to order this data set?

    Downloadable Data

  3. What legal disclaimers am I supposed to read?

    This dataset has been approved for release and publication by the USGS. Although it has been subjected to rigorous review and is substantially complete, the USGS reserves the right to revise the data pursuant to further analysis and review. Furthermore, it is released on condition that neither the U.S. Government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights.

    Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.

  4. How can I download or order the data?

  5. What hardware or software do I need in order to use the data set?

    The user must have a program capable of reading and processing ASCII formatted XYZ data files.

Who wrote the metadata?

Dates:
Last modified: 31-Mar-2008
Metadata author:
Larry Poppe
U.S. Geological Survey
Geologist
384 Woods Hole Road
Woods Hole, MA 02543-1598
USA

(508) 548-8700 x2314 (voice)
(508) 457-2310 (FAX)
lpoppe@usgs.gov

Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)
Metadata extensions used:

Generated by mp version 2.8.6 on Mon Mar 31 12:42:20 2008