| Topographic survey transect endpoint coordinates along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) |
Total Station |
This dataset contains the easting, northing, and elevation values of the river-right and river-left transect endpoint reference benchmarks (RBM and LBM) from survey transects at 10 survey reaches along the Carmel River, central California. Topographic surveys were completed on these transects during eight summer surveys (in 2013, 2014, 2015, 2016, 2017, 2019, 2020 and 2021). See accompanying file within this data release for elevation measurements. All data were collected in NAD83 UTM10N horizontal coordinates and NAVD88 Geoid 12B vertical coordinates, in units of meters. The positions of some reference marks were selected using only horizontal reference, the elevation values for these marks are set to a no data value of "NULL" in the data file. |
Amy East |
| Topographic survey transect data along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) |
Total Station |
Topographic surveys were completed during eight summer surveys (in 2013, 2014, 2015, 2016, 2017, 2019, 2020 and 2021) at 10 sites along the Carmel River, CA: Berwick (BW), Control Reach (CR), Crossroads (CRO), DeDampierre Lower (DDL), DeDampierre Upper (DDU), Dam Reach (DM), Reservoir Reach (RS), San Carlos (SC), Sleepy Hollow (SH), and Schulte Road (SR)). Topographic measurements were made at multiple locations along four to six cross-section transects per site using a total station (at sites CR, RS, DM and SH) and with an auto level and survey rod (at sites DDU, DDL, BW, SR, SC and CRO). This dataset contains the cross-sectional elevation measurements for each transect and survey year. The elevation measurement locations along each transect were located by measuring distances between corresponding endpoint coordinates, starting from river left (see accompanying file within this data release for topographic survey transect endpoint coordinates). For the transects measured with a total station (CR, RS, DM and SH), horizontal coordinates, elevation and distance from the left bank end point are provided. For the transects measured with an auto level (DDU, DDL, BW, SR, SC and CRO), only elevation and distance from left bank end point are provided (horizontal coordinates are defined as NULL for these transects). Vertical coordinates are referenced to the NAVD88 vertical datum, in units of meters. Horizontal coordinates are referenced to the NAD83(2011) reference frame, projected in Universal Transverse Mercator (UTM) coordinates (zone 10N).
These data supersede grain-size data originally published in 2017 at https://doi.org/10.5066/F74M93HF. |
Amy East |
