netcdf ocean-time-series/Stellwagen/DIAMONDSHOALS/8545advs-cal.nc {
dimensions:
time = UNLIMITED; // (2832 currently)
depth = 1;
lon = 1;
lat = 1;
variables:
float burst(time=2832);
:units = "count";
:name = "burst";
:generic_name = "record";
:epic_code = 1207; // int
:long_name = "Burst Number";
:_FillValue = 1.0E35f; // float
int time(time=2832);
:FORTRAN_format = "F10.2";
:units = "True Julian Day";
:type = "EVEN";
:name = "time";
:generic_name = "time";
:epic_code = 624; // int
:comment = "UT Julian days that begin at midnight; 1968-05-23 = 2440000";
:comment1 = "time, taken from burst data, fixed at center of burst";
int time2(time=2832);
:FORTRAN_format = "F10.2";
:generic_name = "time";
:name = "time2";
:epic_code = 624; // int
:units = "msec since 0:00 GMT";
:type = "EVEN";
float depth(depth=1);
:FORTRAN_format = "F10.2";
:units = "m";
:name = "depth";
:type = "EVEN";
:generic_name = "depth";
:epic_code = 3; // int
:long_name = "DEPTH (m)";
:sample_volume_offset = 18.0; // double
:transducer_offset_from_bottom = 0.56; // double
float lon(lon=1);
:FORTRAN_format = "f10.4";
:units = "degree_east";
:type = "EVEN";
:epic_code = 502; // int
:name = "LON";
:long_name = "LONGITUDE";
:generic_name = "lon";
float lat(lat=1);
:FORTRAN_format = "F10.2";
:units = "degree_north";
:type = "EVEN";
:epic_code = 500; // int
:name = "LAT";
:long_name = "LATITUDE";
:generic_name = "lat";
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float u_1205(time=2832, depth=1, lat=1, lon=1);
:epic_code = 1205; // int
:name = "u";
:long_name = "Mean Eastward Velocity";
:generic_name = "u";
:units = "cm/s";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:sample_volume_offset = 18.0; // double
:serial = "B372B";
:minimum = -11.1553755f; // float
:maximum = 27.979656f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float v_1206(time=2832, depth=1, lat=1, lon=1);
:epic_code = 1206; // int
:name = "v";
:long_name = "Mean Northward Velocity";
:generic_name = "v";
:units = "cm/s";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:sample_volume_offset = 18.0; // double
:serial = "B372B";
:minimum = -75.26353f; // float
:maximum = 38.447582f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float w_1204(time=2832, depth=1, lat=1, lon=1);
:epic_code = 1204; // int
:name = "w";
:long_name = "Mean Vertical Velocity";
:generic_name = "w";
:units = "cm/s";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:sample_volume_offset = 18.0; // double
:serial = "B372B";
:minimum = -9.6294f; // float
:maximum = 2.633994f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float USTD_4097(time=2832, depth=1, lat=1, lon=1);
:epic_code = 4097; // int
:name = "USTD";
:long_name = "Std. Dev. of east component";
:generic_name = "ustd";
:units = "cm s-1";
:FORTRAN_format = "f8.2";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 3.306352f; // float
:maximum = 48.546017f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float VSTD_4098(time=2832, depth=1, lat=1, lon=1);
:epic_code = 4098; // int
:name = "VSTD";
:long_name = "Std. Dev. of north component";
:generic_name = "vstd";
:units = "cm s-1";
:FORTRAN_format = "f8.2";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 3.6902606f; // float
:maximum = 34.175594f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float WSTD_4099(time=2832, depth=1, lat=1, lon=1);
:epic_code = 4099; // int
:name = "WSTD";
:long_name = "Std. Dev. of upward component";
:generic_name = "wstd";
:units = "cm s-1";
:FORTRAN_format = "f8.2";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 0.5088981f; // float
:maximum = 5.729185f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float u_1205min(time=2832, depth=1, lat=1, lon=1);
:name = "u_min";
:long_name = "Minimum Eastward Velocity";
:generic_name = "u_min";
:units = "cm/s";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = -188.53915f; // float
:maximum = 2.0647333f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float v_1206min(time=2832, depth=1, lat=1, lon=1);
:name = "v_min";
:long_name = "Minimum Northward Velocity";
:generic_name = "v_min";
:units = "cm/s";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = -209.4357f; // float
:maximum = 2.019713f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float w_1204min(time=2832, depth=1, lat=1, lon=1);
:name = "w_min";
:long_name = "Minimum Vertical Velocity";
:generic_name = "w_min";
:units = "cm/s";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = -45.001587f; // float
:maximum = -2.1217027f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float u_1205max(time=2832, depth=1, lat=1, lon=1);
:name = "u_max";
:long_name = "Maximum Eastward Velocity";
:generic_name = "u_max";
:units = "cm/s";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 10.995798f; // float
:maximum = 208.6739f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float v_1206max(time=2832, depth=1, lat=1, lon=1);
:name = "v_max";
:long_name = "Maximum Northward Velocity";
:generic_name = "v_max";
:units = "cm/s";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = -8.19498f; // float
:maximum = 166.92433f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float w_1204max(time=2832, depth=1, lat=1, lon=1);
:name = "w_max";
:long_name = "Maximum Vertical Velocity";
:generic_name = "w_max";
:units = "cm/s";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 1.2376707f; // float
:maximum = 30.389534f; // float
:valid_range = -1000.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float CS_300(time=2832, depth=1, lat=1, lon=1);
:epic_code = 300; // int
:name = "CS";
:long_name = "CURRENT SPEED (CM/S) ";
:generic_name = "vspd";
:units = "cm s-1";
:FORTRAN_format = "f8.2";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 0.21251465f; // float
:maximum = 75.35266f; // float
:valid_range = 0.0f, 1000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float CD_310(time=2832, depth=1, lat=1, lon=1);
:epic_code = 310; // int
:name = "CD";
:long_name = "CURRENT DIRECTION (T) ";
:generic_name = "vdir";
:units = "degrees";
:FORTRAN_format = "f8.2";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 0.047268208f; // float
:maximum = 359.80173f; // float
:valid_range = 0.0f, 360.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float AGC1_1221(time=2832, depth=1, lat=1, lon=1);
:name = "AGC1";
:long_name = "Mean Echo Intensity (AGC) Beam 1";
:generic_name = "AGC";
:FORTRAN_format = " ";
:units = "counts";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:valid_range = 0.0, 14089.81; // double
:NOTE = "dB = counts x 0.43";
:_FillValue = 1.0E35f; // float
:minimum = 41.521427f; // float
:maximum = 227.24048f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float AGC2_1222(time=2832, depth=1, lat=1, lon=1);
:name = "AGC2";
:long_name = "Mean Echo Intensity (AGC) Beam 2";
:generic_name = "AGC";
:FORTRAN_format = " ";
:units = "counts";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:valid_range = 0.0, 14089.81; // double
:NOTE = "dB = counts x 0.43";
:_FillValue = 1.0E35f; // float
:minimum = 126.18357f; // float
:maximum = 229.34036f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float AGC3_1223(time=2832, depth=1, lat=1, lon=1);
:name = "AGC3";
:long_name = "Mean Echo Intensity (AGC) Beam 3";
:generic_name = "AGC";
:FORTRAN_format = " ";
:units = "counts";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:valid_range = 0.0, 14089.81; // double
:NOTE = "dB = counts x 0.43";
:_FillValue = 1.0E35f; // float
:minimum = 119.47191f; // float
:maximum = 229.14572f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float cor1_1285(time=2832, depth=1, lat=1, lon=1);
:name = "cor1";
:long_name = " Beam 1 Correlation";
:generic_name = "Cor";
:FORTRAN_format = " ";
:units = "percent";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:valid_range = 0.0, 100.0; // double
:_FillValue = 1.0E35f; // float
:minimum = 12.582857f; // float
:maximum = 99.016426f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float cor2_1286(time=2832, depth=1, lat=1, lon=1);
:name = "cor2";
:long_name = " Beam 2 Correlation";
:generic_name = "Cor";
:FORTRAN_format = " ";
:units = "percent";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:valid_range = 0.0, 100.0; // double
:_FillValue = 1.0E35f; // float
:minimum = 64.1206f; // float
:maximum = 99.006546f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float cor3_1287(time=2832, depth=1, lat=1, lon=1);
:name = "cor3";
:long_name = " Beam 3 Correlation";
:generic_name = "Cor";
:FORTRAN_format = " ";
:units = "percent";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:valid_range = 0.0, 100.0; // double
:_FillValue = 1.0E35f; // float
:minimum = 66.31953f; // float
:maximum = 99.020355f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float P_4023(time=2832, lat=1, lon=1);
:epic_code = 4023; // int
:name = "P";
:long_name = "AVERAGE BURST PRESSURE ";
:generic_name = "pres";
:units = "mbar";
:FORTRAN_format = "f10.3";
:sensor_type = "ParosFreq";
:sensor_depth = 13.091840004768372; // double
:initial_sensor_height = 1.6299999952316284; // double
:serial = "P70390";
:minimum = 2288.2693f; // float
:maximum = 2700.483f; // float
:valid_range = 0.0f, 100000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float SDP_850(time=2832, lat=1, lon=1);
:epic_code = 850; // int
:name = "SDP";
:long_name = "STAND. DEV. (PRESS) ";
:generic_name = "pres";
:units = "mbar";
:sensor_type = "ParosFreq";
:sensor_depth = 13.091840004768372; // double
:initial_sensor_height = 1.6299999952316284; // double
:serial = "P70390";
:minimum = 4.7676935f; // float
:maximum = 73.301414f; // float
:valid_range = 0.0f, 5000.0f; // float
:cal_serialnum = "P70390";
:cal_F0 = 1.2E7f; // float
:cal_U0 = 0.0f; // float
:cal_Y = 0.0f, 0.0f, 0.0f, 0.0f; // float
:cal_C = 606.2662f, 0.00158605f, -5.55501E-5f, 0.0f; // float
:cal_D = 0.024865f, 0.0f, 0.0f, 0.0f; // float
:cal_T = 27.75208f, -7.33351E-5f, 1.06256E-6f, 9.14717E-10f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float Tx_1211(time=2832, depth=1, lat=1, lon=1);
:name = "Tx";
:long_name = "Transducer Temp.";
:generic_name = "temp";
:units = "degrees C";
:epic_code = 1211; // int
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 5.673588f; // float
:maximum = 21.283648f; // float
:valid_range = -5.0f, 40.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float NEP1_56(time=2832, lat=1, lon=1);
:cal_gain = 1.0f; // float
:cal_coef = -9.1178f, 1495.226f; // float
:cal_manufacturer = "Wetlabs";
:cal_model = "OBS 3+ High Output";
:cal_units = "NTU";
:name = "nep1";
:long_name = "BACKSCATTER INTENSITY 1";
:units = "v";
:generic_name = "nephelometer";
:epic_code = 56; // int
:sensor_type = "nephelometer";
:sensor_depth = 14.481840005364418; // double
:initial_sensor_height = 0.23999999463558197; // double
:serial = "OBS7409";
:minimum = 0.0040775845f; // float
:maximum = 3.0998156f; // float
:valid_range = 0.0f, 5.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float Sed1_981(time=2832, lat=1, lon=1);
:cal_gain = 1.0f; // float
:cal_coef = -9.1178f, 1495.226f; // float
:cal_manufacturer = "Wetlabs";
:cal_model = "OBS 3+ High Output";
:cal_units = "NTU";
:name = "sed1";
:long_name = "Sediment concentration 1";
:generic_name = "sed";
:epic_code = 981; // int
:units = "g/l";
:sensor_type = "nephelometer";
:sensor_depth = 14.481840005364418; // double
:initial_sensor_height = 0.23999999463558197; // double
:serial = "OBS7409";
:minimum = 6.09691f; // float
:maximum = 4635.3066f; // float
:valid_range = 0.0f, 10000.0f; // float
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float vrange(time=2832, depth=1, lat=1, lon=1);
:name = "vrange";
:long_name = "Volume Range to Boundary";
:generic_name = "vrange";
:epic_code = 0; // int
:units = "m";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 0.0145f; // float
:maximum = 0.3615f; // float
:valid_range = 0.0f, 200.0f; // float
:NOTE = "edited by ecorr";
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float brange(time=2832, depth=1, lat=1, lon=1);
:name = "brange";
:long_name = "Sensor Range to Boundary";
:generic_name = "brange";
:epic_code = 0; // int
:units = "m";
:FORTRAN_format = " ";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 0.1792f; // float
:maximum = 0.54209995f; // float
:valid_range = 0.0f, 200.0f; // float
:NOTE = "edited by ecorr";
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float Hdg_1215(time=2832, depth=1, lat=1, lon=1);
:name = "Hdg";
:long_name = "INST Heading ";
:generic_name = "hdg";
:epic_code = 1215; // int
:units = "degrees";
:FORTRAN_format = "f10.2";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 222.6f; // float
:maximum = 349.7f; // float
:valid_range = 0.0f, 360.0f; // float
:NOTE = "Median of burst heading data";
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float Ptch_1216(time=2832, depth=1, lat=1, lon=1);
:name = "Ptch";
:long_name = "INST Pitch ";
:generic_name = "ptch";
:epic_code = 1216; // int
:units = "degrees";
:FORTRAN_format = "f10.2";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = -50.0f; // float
:maximum = 3.0f; // float
:valid_range = -180.0f, 180.0f; // float
:NOTE = "Median of burst pitch data";
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float Roll_1217(time=2832, depth=1, lat=1, lon=1);
:name = "Roll";
:long_name = "INST Roll ";
:generic_name = "roll";
:epic_code = 1217; // int
:units = "degrees";
:FORTRAN_format = "f10.2";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = -50.0f; // float
:maximum = 1.3f; // float
:valid_range = -180.0f, 180.0f; // float
:NOTE = "Median of burst roll data";
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float HSD_1218(time=2832, depth=1, lat=1, lon=1);
:name = "HSD";
:long_name = "Heading Std. Dev. ";
:generic_name = "hdg";
:epic_code = 1218; // int
:units = "degrees";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 0.0f; // float
:maximum = 1.5416355f; // float
:valid_range = 0.0f, 360.0f; // float
:NOTE = "Calculated from burst heading data";
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float PSD_1219(time=2832, depth=1, lat=1, lon=1);
:name = "PSD";
:long_name = "Pitch Std. Dev. ";
:generic_name = "ptch";
:epic_code = 1219; // int
:units = "degrees";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 0.0f; // float
:maximum = 14.504684f; // float
:valid_range = -180.0f, 180.0f; // float
:NOTE = "Calculated from burst pitch data";
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
float RSD_1220(time=2832, depth=1, lat=1, lon=1);
:name = "RSD";
:long_name = "Roll Std. Dev. ";
:generic_name = "roll";
:epic_code = 1220; // int
:units = "degrees";
:sensor_type = "Sontek ADV";
:sensor_depth = 14.16184; // double
:initial_sensor_height = 0.56; // double
:serial = "B372B";
:minimum = 0.0f; // float
:maximum = 15.145475f; // float
:valid_range = -180.0f, 180.0f; // float
:NOTE = "Calculated from burst roll data";
:_FillValue = 1.0E35f; // float
:comment = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care";
// global attributes:
:MOORING = "854_";
:WATER_DEPTH = 14.72184; // double
:latitude = 35.17863; // double
:longitude = -75.42292; // double
:magnetic_variation = -10.5; // double
:INST_TYPE = "Sontek ADV";
:DATA_ORIGIN = "USGS WHSC Sed Trans Group";
:EXPERIMENT = "Carolinas Coastal Change Processes Project";
:PROJECT = "USGS Coastal Marine Geology Program";
:DESCRIPT = "Sontek ADV calibrated data statistics file";
:Conventions = "PMEL/EPIC";
:DATA_SUBTYPE = " ";
:WATER_MASS = "?";
:COMPOSITE = 0; // int
:POS_CONST = 0; // int
:FILL_FLAG = 1; // int
:DEPTH_CONST = 1; // int
:DATA_CMNT = "tripod tipped over on 4/17 0000h. Data after that is likely at a different depth, so should be used with care: tripod tipped over on 4/17 0000h. velocity data is NG after that so was replaced with fill_value- other data after that is likely at a different depth so use with care";
:VAR_FILL = 1.0E35f; // float
:Deployment_date = "12-Jan-2009";
:Recovery_date = "11-May-2009";
:ADVProbeHeight = 0.56; // double
:ADVSampleVolumeOffset = 18.0; // double
:cpuSoftWareVerNum = 8.5; // double
:dspSoftWareVerNum = 4.1000000000000005; // double
:ADVType = "10MHz_5cm";
:SensorOrientation = "down";
:CompassInstalled = "Yes";
:RecorderInstalled = "Yes";
:TempInstalled = "Yes";
:PressInstalled = "No";
:PressScale = 0.0; // double
:PressOffset = 0.0; // double
:CompassOffset = 0.0; // double
:PressFreqOffset = 21.0; // double
:ExtSensorInstalled = "1_OBS";
:ExtPressInstalled = "ParosFreq";
:PressScale_2 = 0.0; // double
:CTDInstalled = "None";
:ADVProbeConfig = "Ocean Probe";
:ADVProbeSerial = "B372B";
:ADVProbeNbeams = 3.0; // double
:ADVProbeSampInterval = 3.0; // double
:ADVProbeXmtRecDist = 0.09000000357627869; // double
:ADVProbeSamplingVolumeOffset = 18.0; // double
:ADVDeploymentSetupSyncMode = "Start";
:ADVDeploymentSetupSampleRate = 8.0; // double
:ADVDeploymentSetupBurstInterval = 3600.0; // double
:ADVDeploymentSetupSamplesPerBurst = 8400.0; // double
:ADVDeploymentSetupDeploymentName = "8545";
:ADVDeploymentSetupBeginDeployment = 9.0, 1.0, 2009.0, 0.0, 51.0, 15.0, 94.0; // double
:ADVDeploymentSetupADRComments = "Ch1 OBS3+ S7409Paros 70390Slave to G340 yellow";
:ADVDeploymentSetupRecordedDataFlags = 1.0, 1.0, 1.0, 0.0, 1.0, 1.0, 1.0, 0.0; // double
:CREATION_DATE = "02-Sep-2010 13:24:12";
:COORD_SYSTEM = "GEOGRAPHICAL+SAMPLE";
:DATA_TYPE = "TIME+SAMPLE";
:history = "Tue Sep 7 13:53:03 2010: ncrcat All_A8545advs-cal.nc All_B8545advs-cal.nc 8545advs-cal.nc\nconverted by adv2nc; SVN $Revision: 1849 $: cleanhydra SVN $Revision: 1921 $ applied thumbfinger with nsd = 10.000000: Converted to netCDF by adr2cdf v1849; cleanhydra SVN $Revision: 1921 $ applied fix_vbrange with min-max, std = 225.000000&; 2.800000e+000 ; cleanhydra SVN $Revision: 1921 $ applied fix_vbrange with min-max, std = 50.000000(; 2.800000e+000 ";
:DELTA_T = "3600";
:VAR_DESC = "burst:u:v:w:USTD:VSTD:WSTD:u_min:v_min:w_min:u_max:v_max:w_max:CS:CD:AGC1:AGC2:AGC3:cor1:cor2:cor3:P:SDP:Tx:nep1:sed1:vrange:brange:Hdg:Ptch:Roll:HSD:PSD:RSD";
:ADVCalcSampleVolumeOffset = 0.16450000000000004; // double
:start_time = "13-Jan-2009 00:00:01";
:stop_time = "10-May-2009 23:00:00";
:nco_openmp_thread_number = 1; // int
:note = "velocity data replaced with fillValue after tripod tipped over on April, 17, 0000 (burst 2353). Other varaibles not changed";
}