Water depth and turbidity time-series data were collected in Little Holland Tract (LHT) in 2015. Depth (from pressure) was measured in high-frequency (6 or 8 Hz) bursts. Burst means represent tidal stage, and burst data can be used to determine wave height and period. The turbidity sensors were calibrated to suspended-sediment concentration measured in water samples collected on site. The calibration and fit parameters for all of the turbidity sensors used in the study are tabulated and provided with the ...

Water depth, turbidity, and current velocity time-series data were collected in Liberty Island from 2015 to 2017. Depth (from pressure) and velocity were measured in high-frequency (8 Hz) bursts. Burst means represent tidal stage and currents, and burst data can be used to determine wave height, period, and direction, and wave-orbital velocity. The turbidity sensors were calibrated to suspended-sediment concentration measured in water samples collected on site. The calibration and fit parameters for all of ...

Water depth, turbidity, and current velocity time-series data were collected in Little Holland Tract from 2015 to 2017. Depth (from pressure) and velocity were measured in high-frequency (8 Hz) bursts. Burst means represent tidal stage and currents, and burst data can be used to determine wave height, period, direction, and wave-orbital velocity. The turbidity sensors were calibrated to suspended-sediment concentration measured in water samples collected on site. The calibration and fit parameters for all ...

Water depth, turbidity, and current velocity time-series data were collected in Little Holland Tract in 2016. Depth (from pressure) and velocity were measured in high-frequency (8 Hz) bursts. Burst means represent tidal stage and currents, and burst data can be used to determine wave height, period, direction, and wave-orbital velocity. The turbidity sensors were calibrated to suspended-sediment concentration measured in water samples collected on site. The calibration and fit parameters for all of the ...

This dataset includes 2,523 still images extracted from geo-referenced digital video imagery of the seafloor at the mouth of the Columbia River, OR and WA, USA, along with grain size analysis of the surface sediment. Underwater digital video was collected in September 2014 in the mouth of the Columbia River, USA, as part of the U.S. Geological Survey Coastal and Marine Geology Program contribution to the Office of Naval Research funded River and Inlets Dynamics experiment (RIVET II). Still images were ...

This dataset includes 63 still images extracted from digital video imagery of sediment grab samples, along with laboratory grain size analysis of the sediment grab samples, taken from the mouth of the Columbia River, OR and WA, USA. Digital video was collected in September 2014 in the mouth of the Columbia River, USA, as part of the U.S. Geological Survey Coastal and Marine Geology Program contribution to the Office of Naval Research funded River and Inlets Dynamics experiment (RIVET II). Still images were ...

Bathymetric data were collected by the U.S. Geological Survey (USGS) in 2015 for Little Holland Tract in the Sacramento-San Joaquin River Delta, California. The data were collected using a personal watercraft (PWC) platform that consisted of Trimble R7 Global Navigation Satellite System (GNSS) receivers with Zephyr 2 antennas, combined with Odom Echotrac CV-100 single-beam echosounders and 200 kHz transducers. Data was post-processed to remove spurious data points. Raw depths were converted to ellipsoid ...

This product is a digital elevation model (DEM) for the Little Holland Tract in the Sacramento-San Joaquin River Delta, California based on U.S. Geological Survey (USGS)-collected elevation data, merged with existing topographic and bathymetric elevation data. The USGS collected topographic and bathymetric elevation data in 2015, using a combination of methods. Topographic and shallow-water bathymetric data were collected on foot using a global positioning system (GPS) backpack platform that consisted of ...

Topographic data were collected by the U.S. Geological Survey (USGS) in 2015 for Little Holland Tract in the Sacramento-San Joaquin River Delta, California. The data were collected on foot using a global positioning system (GPS) backpack platform that consisted of survey-grade Trimble R10 and R7 global navigation satellite system (GNSS) receivers with Zephyr 2 antennas. Orthometric elevations relative to NAVD88 were computed using the National Geodetic Survey Geoid12a, and the final data were projected in ...

Water depth and turbidity time-series data were collected in Little Holland Tract (LHT) from 2015 to 2017. Depth (from pressure) was measured in high-frequency (6 or 8 Hz) bursts. Burst means represent tidal stage, and burst data can be used to determine wave height and period. The turbidity sensors were calibrated to suspended-sediment concentration measured in water samples collected on site. The calibration and fit parameters for all of the turbidity sensors used in the study are tabulated and provided ...

Water depth and turbidity time-series data were collected in Little Holland Tract (LHT) from 2015 to 2017. Depth (from pressure) was measured in high-frequency (6 or 8 Hz) bursts. Burst means represent tidal stage, and burst data can be used to determine wave height and period. The turbidity sensors were calibrated to suspended-sediment concentration measured in water samples collected on site. The calibration and fit parameters for all of the turbidity sensors used in the study are tabulated and provided ...

Grain size distribution and bulk density are reported for sediment push cores from two flooded agricultural tracts, Little Holland Tract and Liberty Island, in the Sacramento-San Joaquin Delta, California. Push core samples were collected from 14 sites by the U.S Geological Survey in August, 2014. Each core was analyzed at multiple depths to investigate variations in particle sizes with depth below the sediment surface. The same sites were sampled again in 2016 (https://www.sciencebase.gov/catalog/item ...

Grain size distribution and bulk density are reported for sediment push cores from two flooded agricultural tracts, Little Holland Tract and Liberty Island, in the Sacramento-San Joaquin Delta, California. Push core samples were collected from 17 sites by the U.S. Geological Survey in June 2016. Each core was analyzed at multiple depths to investigate variations in particle sizes with depth below the sediment surface. The same sites were sampled previously in 2014 (https://www.sciencebase.gov/catalog/item ...

Grain size distribution and bulk density are reported for sediment samples from two flooded agricultural tracts, Little Holland Tract and Liberty Island, in the Sacramento-San Joaquin Delta, California. Samples were repeatedly collected at 8 sites using a Ponar grab or push core samplers during 19 visits to the study area from 2015 to 2019. The long-term time series data collection stations (sites LWA, HVB, HWC, and LVB) were sampled on almost every field survey, and the remaining sites were sampled 6 or ...

Water depth, turbidity, and current velocity time-series data were collected in Liberty Island Conservation Bank (WVA) in 2017. The turbidity sensors were not calibrated to suspended-sediment concentration at this location. Typically, each zip folder for a deployment period contains two data files from a velocimeter and one data file from a CTD, each of which include data from an optical backscatter sensor.

Water depth, turbidity, and current velocity time-series data were collected in Little Holland Tract in 2016. Depth (from pressure) and velocity were measured in high-frequency (8 Hz) bursts. Burst means represent tidal stage and currents, and burst data can be used to determine wave height, period, and direction, and wave-orbital velocity. The turbidity sensors were calibrated to suspended-sediment concentration measured in water samples collected on site. The calibration and fit parameters for all of the ...

A process-based numerical model of the mouth of the Columbia River (MCR) and estuary, Oregon and Washington, was applied to simulate hydrodynamic conditions for the time period of the Office of Naval Research-funded River and Inlets Dynamics (RIVET II) field experiment conducted between May 9 and June 15, 2013. The model application was constructed using Delft3D, an open-source software package used to solve the unsteady shallow water equations to simulate water motion due to tides, waves, wind, and ...

Lagrangian surface currents were measured using drifters equipped with global navigation satellite system (GNSS) receivers. A total of 8 drifter deployments were performed between May 25 and June 8, 2013. For each deployment, drifters were released within the MCR and their positions were recorded until the drifters were recovered. The average duration of the drifter deployments varied between 1.6 h and 17.2 h and the number of drifters released in a deployment ranged between 11 and 84. The initial positions ...

Time-series data of water surface elevation, wave height, and water column currents, temperature, salinity, and acoustic seabed images were acquired for 38 days between 9 May and 15 June, 2013 in the mouth of the Columbia River, Oregon and Washington.

This portion of the USGS data release presents sediment grain-size data from samples collected from the mouth of the Columbia River, Oregon and Washington, in 2013. Surface sediment was sampled using a small ponar, or 'grab', sampler on May 9, 2013 from the F/V Cape Windy at 3 locations. A handheld global navigation satellite system (GNSS) receiver was used to determine the locations of sediment samples. The grain size distributions of samples were determined using standard techniques developed by the USGS ...

Spatial surveys of water column currents were performed between June 14 and 16, 2013, in the mouth of the Columbia River, Oregon and Washington. These data were collected using an acoustic-doppler current profiler (ADCP).

Spatial surveys of water column acoustic backscatter were performed between May 28 and June 2, 2013, in the mouth of the Columbia River, Oregon and Washington. These data were collected using a Biosonics DTX single-beam echosounder with 430 kHz transducer.