MacMahon, Jamie

About the author


Hydrodynamic modeling of the mouth of the Columbia River, Oregon and Washington, 2013

A process-based numerical model of the mouth of the Columbia River (MCR) and estuary, Oregon and Washington, was applied to simulate hydrodynamic conditions for the time period of the Office of Naval Research-funded River and Inlets Dynamics (RIVET II) field experiment conducted between May 9 and June 15, 2013. The model application was constructed using Delft3D, an open-source software package used to solve the unsteady shallow water equations to simulate water motion due to tides, waves, wind, and ...

Info
Lagrangian drifter data from the mouth of the Columbia River, Oregon and Washington, 2013

Lagrangian surface currents were measured using drifters equipped with global navigation satellite system (GNSS) receivers. A total of 8 drifter deployments were performed between May 25 and June 8, 2013. For each deployment, drifters were released within the MCR and their positions were recorded until the drifters were recovered. The average duration of the drifter deployments varied between 1.6 h and 17.2 h and the number of drifters released in a deployment ranged between 11 and 84. The initial positions ...

Info
Oceanographic time-series measurements from the mouth of the Columbia River, Oregon and Washington, 2013

Time-series data of water surface elevation, wave height, and water column currents, temperature, salinity, and acoustic seabed images were acquired for 38 days between 9 May and 15 June, 2013 in the mouth of the Columbia River, Oregon and Washington.

Info
Surface-sediment grain-size data from the mouth of the Columbia River, Oregon and Washington, 2013

This portion of the USGS data release presents sediment grain-size data from samples collected from the mouth of the Columbia River, Oregon and Washington, in 2013. Surface sediment was sampled using a small ponar, or 'grab', sampler on May 9, 2013 from the F/V Cape Windy at 3 locations. A handheld global navigation satellite system (GNSS) receiver was used to determine the locations of sediment samples. The grain size distributions of samples were determined using standard techniques developed by the USGS ...

Info
Vessel-mounted acoustic Doppler current profiler (ADCP) data from the mouth of the Columbia River, Oregon and Washington, 2013

Spatial surveys of water column currents were performed between June 14 and 16, 2013, in the mouth of the Columbia River, Oregon and Washington. These data were collected using an acoustic-doppler current profiler (ADCP).

Info
Water column acoustic backscatter data from the mouth of the Columbia River, Oregon and Washington, 2013

Spatial surveys of water column acoustic backscatter were performed between May 28 and June 2, 2013, in the mouth of the Columbia River, Oregon and Washington. These data were collected using a Biosonics DTX single-beam echosounder with 430 kHz transducer.

Info