3D bathymetric surfaces of low- and high-relief sites from the coral reef flat off Waiakane, Molokai, were created using structure-from-motion (SfM) techniques. The two study sites are located approximately 640 m from shore and approximately 20 m apart in the alongshore direction. At each site, an approximate 12-meter diameter area was imaged in three passes by a swimmer using a handheld digital camera. These images were fed into Structure-from-Motion (SfM) software to produce high-resolution (fine-scale), ...

OpenFOAM Computational Fluid Dynamics (CFD) models were developed to simulate wave energy dissipation across natural rough reef surfaces on the reef flat off Waiakane, Molokai, Hawaii, to understand this process in the context of reef restoration design. A total of 140 models were developed (70 per low- and 70 per high-bed-relief domains). Models were calibrated and validated with oceanographic datasets collected in 2018. This data release presents the 140 model scenarios that can be readily input into ...

A digital video camera was installed at Waiakāne, Moloka'i, Hawai'i (HI) and faced west along the beach. Every hour during daylight hours, daily from June 26, 2018, to September 20, 2018, the camera collected raw video and produced snapshots and time-averaged image products. This data release includes the necessary intrinsic orientation (IO) and extrinsic orientation (EO) calibration data to utilize imagery to make quantitative measurements. The camera is part of a U.S. Geological Survey (USGS) research ...

A digital video camera was installed at Waiakāne, Moloka'i, Hawai'i (HI) and faced west along the beach. Every hour during daylight hours, daily from June 26, 2018, to September 20, 2018, the camera collected raw video and produced snapshots and time-averaged image products. One such product is a "runup timestack". Runup timestacks are images created by sampling a cross-shore array of pixels from an image through time as waves propagate towards and run up a beach. Runup timestacks store the red, green, and ...

This data release presents the post-processed global navigation satellite system (GNSS) ground-survey data acquired during the installation of the Argus camera at Waiakāne, Moloka'i, Hawai'i. The data contains topographic survey data collected during the installation of the camera. Data were collected on foot by a person equipped with a GNSS antenna affixed to a backpack outfitted for surveying location and elevation data (XYZ). The GNSS measurements were made using Post-Processed Kinematic (PPK) ...