A process-based numerical model of the mouth of the Columbia River (MCR) and estuary, Oregon and Washington, was applied to simulate hydrodynamic conditions for the time period of the Office of Naval Research-funded River and Inlets Dynamics (RIVET II) field experiment conducted between May 9 and June 15, 2013. The model application was constructed using Delft3D, an open-source software package used to solve the unsteady shallow water equations to simulate water motion due to tides, waves, wind, and ...

Lagrangian surface currents were measured using drifters equipped with global navigation satellite system (GNSS) receivers. A total of 8 drifter deployments were performed between May 25 and June 8, 2013. For each deployment, drifters were released within the MCR and their positions were recorded until the drifters were recovered. The average duration of the drifter deployments varied between 1.6 h and 17.2 h and the number of drifters released in a deployment ranged between 11 and 84. The initial positions ...

Time-series data of water surface elevation, wave height, and water column currents, temperature, salinity, and acoustic seabed images were acquired for 38 days between 9 May and 15 June, 2013 in the mouth of the Columbia River, Oregon and Washington.

This portion of the USGS data release presents sediment grain-size data from samples collected from the mouth of the Columbia River, Oregon and Washington, in 2013. Surface sediment was sampled using a small ponar, or 'grab', sampler on May 9, 2013 from the F/V Cape Windy at 3 locations. A handheld global navigation satellite system (GNSS) receiver was used to determine the locations of sediment samples. The grain size distributions of samples were determined using standard techniques developed by the USGS ...

Spatial surveys of water column currents were performed between June 14 and 16, 2013, in the mouth of the Columbia River, Oregon and Washington. These data were collected using an acoustic-doppler current profiler (ADCP).

Spatial surveys of water column acoustic backscatter were performed between May 28 and June 2, 2013, in the mouth of the Columbia River, Oregon and Washington. These data were collected using a Biosonics DTX single-beam echosounder with 430 kHz transducer.

A process-based wave-resolving hydrodynamic model (XBeach Non-Hydrostatic, ‘XBNH’) was used to create a large synthetic database for use in a “Bayesian Estimator for Wave Attack in Reef Environments” (BEWARE), relating incident hydrodynamics and coral reef geomorphology to coastal flooding hazards on reef-lined coasts. Building on previous work, BEWARE improves system understanding of reef hydrodynamics by examining the intrinsic reef and extrinsic forcing factors controlling runup and flooding on ...

This data release includes representative cluster profiles (RCPs) from a large (>24,000) selection of coral reef topobathymetric cross-shore profiles (Scott and others, 2020). We used statistics, machine learning, and numerical modelling to develop the set of RCPs, which can be used to accurately represent the shoreline hydrodynamics of a large variety of coral reef-lined coasts around the globe. In two stages, the data were reduced by clustering cross-shore profiles based on morphology and hydrodynamic ...