These diagnostic searches indicate keywords that were not recognized as matching vocabularies that are actively supported by the CMHRP metadata catalog on CMGDS. Thesauri are listed here if their names did not match the preferred or alternate names included in the catalog database, OR if they contained terms that did not match terms in the specified vocabulary.
Results are color-coded by center: PCMSC SPCMSC WHCMSC
|
Topographic Lidar Survey of Dauphin Island, Alabama and Chandeleur, Stake, Grand Gosier and Breton Islands, Louisiana, July 12-14, 2013 -- Bare Earth Digital Elevation Models (DEMs)
A topographic lidar survey was conducted on July 12-14, 2013 over Dauphin Island, Alabama and Chandeleur, Stake, Grand Gosier and Breton Islands, Louisiana. The data were collected at a nominal pulse space of 1 meter (m) and processed to identify bare earth elevations. Bare earth Digital Elevation Models (DEMs) were generated based on these data. Photo Science, Inc., was contracted by the U.S. Geological Survey (USGS) to collect and process the lidar data. The bare earth DEMs are 32-bit floating point ERDAS Imagine (IMG) files with a horizontal spatial resolution of 1-m by 1-m. They are projected to Universal Transverse Mercator (UTM), Zone 16, North American Datum (NAD) 1983, meters (m) coordinates. Their vertical datum is NAVD88 (GEOID12A) meters. Eighty-five DEMs, based on a 2-kilometer (km) by 2-km tiling scheme, cover the entire survey area. These lidar data are available to Federal, State and local governments, emergency-response officials, resource managers, and the general public. |
Info |
|
Topographic Lidar Survey of the Alabama, Mississippi, and Southeast Louisiana Barrier Islands, from September 5 to October 11, 2012 -- Bare Earth Digital Elevation Models
A topographic lidar survey was conducted from September 5 to October 11, 2012, for the barrier islands of Alabama, Mississippi and southeast Louisiana, including the coast near Port Fourchon. Most of the data were collected September 5-10, 2012, with a reflight conducted on October 11, 2012, to increase point density in some areas. The data were collected at a nominal pulse space of 1-meter (m) and processed to identify bare earth elevations. Bare earth Digital Elevation Models(DEMs) were generated based on these data. Aero-Metric, Inc., was contracted by the U.S. Geological Survey (USGS) to collect and process the lidar data. The bare earth DEMs are 32-bit floating point ERDAS Imagine (IMG) files with a horizontal spatial resolution of 1-m by 1-m. They are projected to UTM zone 15N or 16N NAD83 meters. Their vertical datum is NAVD88 (GEOID12) meters. The DEMs are organized on a 2-kilometer (km) by 2-km tiling scheme that covers the entire survey area. These lidar data are available to Federal, State and local governments, emergency-response officials, resource managers, and the general public. |
Info |