Processed continuous resistivity profiling data collected in the Indian River Bay, Delaware, on April 13, 2010, on U.S. Geological Survey Field Activity 2010-006-FA

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:


What does this data set describe?

Title:
Processed continuous resistivity profiling data collected in the Indian River Bay, Delaware, on April 13, 2010, on U.S. Geological Survey Field Activity 2010-006-FA
Abstract:
A geophysical survey to delineate the fresh-saline groundwater interface and associated sub-bottom sedimentary structures beneath Indian River Bay, Delaware, was carried out in April 2010. This included surveying at higher spatial resolution in the vicinity of a study site at Holts Landing, where intensive onshore and offshore studies were subsequently completed. The total length of continuous resistivity profiling (CRP) survey lines was 145 kilometers (km), with 36 km of chirp seismic lines surveyed around the perimeter of the bay. Medium-resolution CRP surveying was performed using a 50-meter streamer in a bay-wide grid. Results of the surveying and data inversion showed the presence of many buried paleochannels beneath Indian River Bay that generally extended perpendicular from the shoreline in areas of modern tributaries, tidal creeks, and marshes. An especially wide and deep paleochannel system was imaged in the southeastern part of the bay near White Creek. Many paleochannels also had high-resistivity anomalies corresponding to low-salinity groundwater plumes associated with them, likely due to the presence of fine-grained estuarine mud and peats in the channel fills that act as submarine confining units. Where present, these units allow plumes of low-salinity groundwater that was recharged onshore to move beyond the shoreline, creating a complex fresh-saline groundwater interface in the subsurface. The properties of this interface are important considerations in construction of accurate coastal groundwater flow models. These models are required to help predict how nutrient-rich groundwater, recharged in agricultural watersheds such as this one, makes its way into coastal bays and impacts surface water quality and estuarine ecosystems. For more information on the survey conducted for this project, see https://cmgds.marine.usgs.gov/fan_info.php?fan=2010-006-FA.
  1. How might this data set be cited?
    Bratton, John F., and Cross, VeeAnn A., 2014, Processed continuous resistivity profiling data collected in the Indian River Bay, Delaware, on April 13, 2010, on U.S. Geological Survey Field Activity 2010-006-FA: Open-File Report 2011-1039, U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    Cross, V.A., Bratton, J.F., Michael, H.A., Kroeger, K.D., Green, A., and Bergeron, E., 2014, Continuous Resistivity Profiling and Seismic-Reflection Data Collected in April 2010 from Indian River Bay, Delaware: Open-File Report 2011-1039, U.S. Geological Survey, Reston, VA.

    Online Links:

  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: -75.202683
    East_Bounding_Coordinate: -75.065683
    North_Bounding_Coordinate: 38.618983
    South_Bounding_Coordinate: 38.569250
  3. What does it look like?
  4. Does the data set describe conditions during a particular time period?
    Calendar_Date: 13-Apr-2010
    Currentness_Reference:
    ground condition
  5. What is the general form of this data set?
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      This is a Point data set.
    2. What coordinate system is used to represent geographic features?
      Horizontal positions are specified in geographic coordinates, that is, latitude and longitude. Latitudes are given to the nearest 0.000001. Longitudes are given to the nearest 0.000001. Latitude and longitude values are specified in Decimal degrees. The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257224.
      Vertical_Coordinate_System_Definition:
      Depth_System_Definition:
      Depth_Datum_Name: Local surface
      Depth_Resolution: 0.1
      Depth_Distance_Units: meters
      Depth_Encoding_Method: Explicit depth coordinate included with horizontal coordinates
  7. How does the data set describe geographic features?

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
    • John F. Bratton
    • VeeAnn A. Cross
  2. Who also contributed to the data set?
  3. To whom should users address questions about the data?
    VeeAnn A. Cross
    U.S. Geological Survey
    Marine Geologist
    Woods Hole Coastal and Marine Science Center
    Woods Hole, MA

    (508) 548-8700 x2251 (voice)
    (508) 457-2310 (FAX)
    vatnipp@usgs.gov

Why was the data set created?

This dataset provides the processed continuous resistivity profile (CRP) data collected on April 13, 2010 in the Indian River Bay, Delaware by the AGI SuperSting system and acts as an archive of these data. The CRP system images the subsurface electrical properties of an estuarine, riverine or lacustrine environment. Resistivity differences can be attributed to subsurface geology (conductive vs less conductive layers) and hydrogeologic conditions with fresh water exhibiting high resistivity and saline conditions showing low resistivity.

How was the data set created?

  1. From what previous works were the data drawn?
  2. How were the data generated, processed, and modified?
    Date: 2010 (process 1 of 10)
    The continuous resistivity profile (CRP) system used on this cruise was an AGI SuperSting marine system described at the website: www.agiusa.com/marinesystem.shtml. The particular system used for this acquisition was a 50-m streamer with an 11 electrode array with electrodes spaced 5 meters apart. The source electrodes are graphite, while the receiver electrodes are stainless steel. A dipole-dipole configuration was used for the data collection in which two fixed current electrodes are assigned with the measurement of voltage potential between electrode pairs in the remaining electrodes. The maximum depth below the water surface the streamer can reach is approximately 1/4 the streamer length. So for the 50-m streamer, maximum depth is about 12.5 meters. Each line of data acquisition records several files. The two files necessary for processing are the *.stg and the *.gps file. The STG file contains the resistivity data, while the GPS file contains the navigation information. The navigation system used in concert with the CRP system is a Lowrance LMS-480M with an LGC-2000 GPS antenna and a 200 kHz fathometer transducer. The antenna and fathometer transducer were mounted on the starboard side of the boat. The streamer tow point was on the port side aft. The layback offset between the navigation antenna and the first electrode was 17.6 meters on April 13 and 14. On April 15 the antenna and transducer were moved 1.6 m aft changing the layback offset to 16 m. This layback offset is accounted for by the acquisition system. The approximately 2 m lateral offset is not accounted for. The Lowrance transducer also contains a temperature sensor. Lowrance indicates the speed of sound used by the system is 4800 feet/second. Both the temperature and depth information are recorded in the logged GPS file. There are instances where no depth or temperature information is recorded due to an equipment problem. The CRP system images the subsurface electrical properties of an estuarine, riverine or lacustrine environment. Resistivity differences can be attributed to subsurface geology (conductive vs less conductive layers) and hydrogeologic conditions with fresh water exhibiting high resistivity and saline conditions showing low resistivity.
    Date: May-2010 (process 2 of 10)
    Once the navigation and raw data were assessed to be okay, the actual processing of the resistivity data could start. Of note, see the metadata for jd103gps_bestdepth.shp (available at https://pubs.usgs.gov/of/2011/1039/html/ofr2011-1039-catalog.html) for a description of the work needed to extract valid bathymetry values for use in the data processing. The resistivity data were merged with the navigation data and linearized using AGI's Marine Log Manager (MLM) software. (Note that the Marine Log Manager version is different than the software version of the AGISSAdmin software of which it is a part - although shipped together, the software is developed separately). The GPS files used are the "newgps" files that have been modified to include best available bathymetry values. The version of Marine Log Manager used was AGI SSAdmin MLM v 1.3.4.217 The GPS offset was set to 0 meters since the offset (17.6 meters) between the navigation antenna and the first electrode of the resistivity streamer was accounted for in an acquisition offset. Lateral offset is not accounted for. The lines processed on this day are L1F1, L1F3, L1F5, L1F7, L2F1, L3F1, L4F1, L5F1, L5F2_part1, L5F2_part2, and L5F5. Two of these lines were split during the MLM processing due to sharp turns in the lines. Line L5F2_part1 was split into L5F2_part1a and L5F2_part1b and L5F5 was split into L5F5_a and L5F5_b. These line names are what the * refers to in the source used and source produced citations. This process step and all subsequent process steps were performed by the same person - VeeAnn A. Cross. Person who carried out this activity:
    VeeAnn A. Cross
    U.S. Geological Survey
    Marine Geologist
    Woods Hole Coastal and Marine Science Center
    Woods Hole, MA

    (508) 548-8700 x2251 (voice)
    (508) 457-2310 (FAX)
    vatnipp@usgs.gov
    Data sources used in this process:
    • *newgps.gps
    • *.stg
    Data sources produced in this process:
    • *lin.stg
    • *lin.dep
    Date: May-2010 (process 3 of 10)
    Each DEP file was checked for anomalous bathymetry values, or duplicated distance along values, and those lines in the file were deleted. Data sources used in this process:
    • *.dep
    Data sources produced in this process:
    • *.dep
    Date: Sep-2010 (process 4 of 10)
    EarthImager software does not require that a default resistivity value for the water column be supplied in the DEP file. If one is not supplied, then it calculates a value based on the first electrode pair. On this survey, an additional instrument was deployed to measure water temperature and salinity. This instrument was a YSI 600XLM mounted just behind the GPS/fathometer. See the YSI metadata available at https://pubs.usgs.gov/of/2011/1039/html/ofr2011-1039-catalog.html for details on the processing of the YSI data. An average water resistivity value was calculated based on the YSI measurements during the time of collection of a given line of resistivity data collection. Note that the recorded YSI times are local times, while the CRP records UTC time. During this cruise, UTC is +4 hours compared to local time. This average resistivity value varied for each data file. The calculated value was added to the appropriate place in the DEP files so that a known water resistivity value would be used in the resistivity inversion calculations. These files were saved with a new filename with "wres" appended to the prefix of the filename indicating a water resistivity value is in the header of the file. Data sources used in this process:
    • *.dep
    Data sources produced in this process:
    • *wres.dep
    Date: Sep-2010 (process 5 of 10)
    EarthImager version 2.2.8 build 562 was then used to process the data files. The process settings were set to CRP - Saltwater. The *.ini file accompanying the results contains the parameters used during processing. These parameters include: minimum voltage: 0.02; minimum abs(V/I): 2E-5; max repeat error: 3%; min apparent res: 0.03; max apparent res: 1000; max reciprocal error: 5%; remove negative resistivity, smooth model inversion; finite element method; Cholesky decomposition; Dirichlet boundary condition; thickness incremental factor: 1.1; depth factor: 1.1; max number of CG iterations: 100; stop criteria: number of iterations 8; max RMS 3%; error reduction 5%; L2Norm; CRP processing using a 65% overlap. These INI files can be loaded in EarthImager to help maintain consistent processing parameters for other datasets. When the files are processed, numerous files are generated. Because of the "roll-along" nature of the processing, each line takes several iterations of processing which are then combined into a single output. The output consists of numerous files including JPEG images and text files representing the XYZ position of each resistivity value. There are four JPEG images generated with each process when possible - a long version with the x-axis labeled with distance along line (in meters) and a corresponding short version of the same information. Additionally, there is a long version with the x-axis labeled with latitudes and longitudes and the corresponding short version with the same information. The JPEG files produced use a color scale for the resistivity that is based on the data extent from that particular file. The JPEG images also include a plot of temperature along the line. In addition to the JPEG images, there are text files with the extensions of *.llt, and *.xyz. Each of these is a text file. The LLT file has four columns of information: longitude in decimal degrees, latitude in decimal degrees, depth in meters, and resistivity value in ohm-m. The XYZ file has three columns of information: distance along line in meters, depth in meters, and resistivity value in ohm-m. There is also a file created with a UTM extension which has the same format as the LLT file except it contains the coordinates in UTM eastings and northings in the zone appropriate for the survey line (software determined). This file was not checked for accuracy as software versions in the past gave erroneous UTM fixes. An example of the file naming convention is as follows: For input files of L3F1_lin.stg and L3F1_lin_wres.dep the resulting series of output files are: L3F1_lin1_trial1.ini; L3F1_lin_AllInvRes.llt; L3F1_lin_AllInvRes.xyz; L3F1_lin_trial1_InvResLong.jpg; L3F1_lin_trial1_InvResShort.jpg. The JPEG images with distance along lines along the X-axis are L3F1_lin_trial1_InvResLong_linear.jpg and L3F1_lin_trial1_InvResShort_linear.jpg. You can process an individual line as many times as you want and the software places the results in incrementing folder names starting with trial1. These data represent trial3, which is the processing with the water resistivity value. The DEP file used in processing is also written to the results folder. Data sources used in this process:
    • *lin.stg
    • *lin_wres.dep
    Data sources produced in this process:
    • *.ini
    • *.llt
    • *.utm
    • *.xyz
    • *.jpg
    Date: Feb-2011 (process 6 of 10)
    The XYZ output file was then loaded into MATLAB version 7.5.0.342 (R2007b), along with the depth information from the DEP file, to create a new JPEG image with the same color scale for all the data files. In this manner, the JPEG images can be compared directly. Care was taken to try to get the vertical and horizontal scales uniform as well, although this was not always possible due to MATLAB limitations. These images reside in the "matlabimages" folder. These JPEG images include a black line within the resistivity profile which represents the sediment water interface based on the depth values from the DEP file. The local MATLAB script used to load the data was cp_ir_50m.m, while the local MATLAB script used to export the JPEG image was exportfig.m. Data sources used in this process:
    • *.xyz
    • *wres.dep
    Data sources produced in this process:
    • matlabimages/*.jpg
    Date: 13-Jun-2017 (process 7 of 10)
    Edits to the metadata were made to fix any errors that MP v 2.9.36 flagged. This is necessary to enable the metadata to be successfully harvested for various data catalogs. In some cases, this meant adding text "Information unavailable" or "Information unavailable from original metadata" for those required fields that were left blank. Other minor edits were probably performed (title, publisher, publication place, etc.). Attempted to modify http to https where appropriate. Moved the minimal source information provided to make it the first process step. The metadata date (but not the metadata creator) was edited to reflect the date of these changes. The metadata available from a harvester may supersede metadata bundled within a download file. Compare the metadata dates to determine which metadata file is most recent. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 20-Jul-2018 (process 8 of 10)
    USGS Thesaurus keywords added to the keyword section. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 18-Nov-2019 (process 9 of 10)
    Crossref DOI link was added as the first link in the metadata. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 08-Sep-2020 (process 10 of 10)
    Added keywords section with USGS persistent identifier as theme keyword. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
  3. What similar or related data should the user be aware of?
    Advanced Geosciences, Inc., 2003, Instruction Manual for the Marine Log Manager Module of the Administrator for SuperSting Software, Release 1.3.7: Advanced Geosciences, Inc., Austin, TX.

    Online Links:

    Advanced Geosciences, Inc., 2008, Instruction Manual for EarthImager 2D, version 2.2.8, Resistivity and IP inversion software: Advanced Geosciences, Inc., Austin, TX.

    Online Links:


How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
  2. How accurate are the geographic locations?
    The navigation system used was a Lowrance 480M with an LGC-2000 Global Positioning System (GPS) antenna. The antenna was located directly above the fathometer transducer mount point, but offset to the starboard by 2 meters from the resistivity streamer tow point. GPS data are assumed to be accurate wtihin 10 meters on this survey.
  3. How accurate are the heights or depths?
    All bathymetry values were acquired by the 200 kHz Lowrance fathometer. The fathometer was mounted on the starboard side of the R/V Knob, directly below the GPS antenna. The Lowrance manufacturer indicates the speed of sound used by the system to calculate depth is 4800 feet/second. The depth values are not corrected for the approximately 0.2 m transducer draft. All depth values are assumed to be accurate to within 1 meter.
  4. Where are the gaps in the data? What is missing?
    All usable data collected on this day were processed. The processed files are included in this dataset. The apparent gaps in the filenames are data files that did not have useable data. These "no data" files include L1F2, L1F4, L1F6, L5F3, and L5F4.
  5. How consistent are the relationships among the observations, including topology?
    Information unavailable from original metadata.

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints None.
Use_Constraints The public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the originator of the dataset.
  1. Who distributes the data set? (Distributor 1 of 1)
    VeeAnn A. Cross
    U.S. Geological Survey
    Marine Geologist
    Woods Hole Coastal and Marine Science Center
    Woods Hole, MA

    (508) 548-8700 x2251 (voice)
    (508) 457-2310 (FAX)
    vatnipp@usgs.gov
  2. What's the catalog number I need to order this data set? Downloadable Data
  3. What legal disclaimers am I supposed to read?
    Neither the U.S. government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
  4. How can I download or order the data?
  5. What hardware or software do I need in order to use the data set?
    The user must have software capable of uncompressing the zip file.

Who wrote the metadata?

Dates:
Last modified: 18-Mar-2024
Metadata author:
VeeAnn A. Cross
U.S. Geological Survey
Marine Geologist
Woods Hole Coastal and Marine Science Center
Woods Hole, MA

(508) 548-8700 x2251 (voice)
(508) 457-2310 (FAX)
whsc_data_contact@usgs.gov
Contact_Instructions:
The metadata contact email address is a generic address in the event the person is no longer with USGS. (updated on 20240318)
Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)

This page is <https://cmgds.marine.usgs.gov/catalog/whcmsc/open_file_report/ofr2011-1039/apr13_procmeta.faq.html>
Generated by mp version 2.9.51 on Mon Mar 25 16:05:36 2024