The 95th percentile of bottom shear stress for the Gulf of Maine south into the Middle Atlantic Bight, May 2010 to May 2011 (GMAINE_95th_perc.shp, Geographic, WGS 84)

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:

What does this data set describe?

Title:
The 95th percentile of bottom shear stress for the Gulf of Maine south into the Middle Atlantic Bight, May 2010 to May 2011 (GMAINE_95th_perc.shp, Geographic, WGS 84)
Abstract:
The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) resolution. Time-series of wave and circulation are created using numerical models, and near-bottom output of steady and oscillatory velocities and an estimate of bottom roughness are used to calculate a time-series of bottom shear stress at 1-hour intervals. Statistical descriptions such as the median and 95th percentile, which are the output included with this database, are then calculated to create a two-dimensional picture of the regional patterns in shear stress. In addition, time-series of stress are compared to critical stress values at select points calculated from observed surface sediment texture data to determine estimates of sea floor mobility.
Supplemental_Information:
This data layer is a subset of the U.S. Geological Survey Sea Floor Stress and Sediment Mobility database, and contains the 95th percentile of bottom shear stress for the Gulf of Maine south into the Middle Atlantic Bight. Gridded stress value (such as the 95th percentile) are calculated by interpolating current model results to the wave model grid, which may result in some water grid cells from the wave model being removed and not included with the output polygons if they partially overlap land cells in the wave model. Sediment mobility statistics (found in other layers) are calculated using wave and current model results at the location of the sample, therefore it is possible in some cases for a sediment mobility statistic to be calculated although it lies within a polygon with no output value, because that specific location may be within a water cell in both models while the containing current grid cell overlaps land in the wave model elsewhere in the cell. The current model used is a finite element grid of higher resolution near the coast than the wave model. The current model grid cell with the center closest to the center of each wave model grid cell and within 0.1 degrees latitude and longitude was used to provide current data for that wave model grid cell. If no current grid cell was within the distance criterion, that wave model cell was excluded. Only those cells with depths less than 500 m are included in this database.
This portion of the database was released in April, 2014.
  1. How might this data set be cited?
    Dalyander, P. Soupy, 2014, The 95th percentile of bottom shear stress for the Gulf of Maine south into the Middle Atlantic Bight, May 2010 to May 2011 (GMAINE_95th_perc.shp, Geographic, WGS 84): Online Database DOI:10.5066/P999PY84, U.S. Geological Survey, Coastal and Marine Hazards and Resources Program, Woods Hole Coastal and Marine Science Center, Woods Hole, MA.

    Online Links:

    This is part of the following larger work.

    Dalyander, P.S., Butman, B., Sherwood, C.R., and Signell, R.P., 2012, U.S. Geological Survey Sea Floor Stress and Sediment Mobility Database: Online Database DOI:10.5066/P999PY84, U.S. Geological Survey, Reston, VA.

    Online Links:

    Other_Citation_Details:
    Suggested citation: Dalyander, P. S., Butman, B., Sherwood, C.R., and Signell, R. P., 2012, U.S. Geological Survey sea floor stress and sediment mobility database: U.S. Geological Survey data release, https://doi.org/10.5066/P999PY84.
  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: -74.149994
    East_Bounding_Coordinate: -64.516663
    North_Bounding_Coordinate: 45.483334
    South_Bounding_Coordinate: 39.750000
  3. What does it look like?
    https://cmgds.marine.usgs.gov/data/whcmsc/data-release/doi-P999PY84/GulfofMaine/data/mobility_browse_gmaine_95th.jpg (JPEG)
    Image displaying coverage area of bottom shear stress and value exceeded 95% of the time for a 1-year period for the Gulf of Maine south into the Middle Atlantic Bight.
  4. Does the data set describe conditions during a particular time period?
    Beginning_Date: 01-May-2010
    Ending_Date: 01-May-2011
    Currentness_Reference:
    ground condition
  5. What is the general form of this data set?
    Geospatial_Data_Presentation_Form: vector digital data
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      Indirect_Spatial_Reference: Gulf of Maine
      This is a Vector data set. It contains the following vector data types (SDTS terminology):
      • G-polygon (22540)
    2. What coordinate system is used to represent geographic features?
      Horizontal positions are specified in geographic coordinates, that is, latitude and longitude. Latitudes are given to the nearest 0.000001. Longitudes are given to the nearest 0.000001. Latitude and longitude values are specified in Decimal degrees. The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257224.
  7. How does the data set describe geographic features?
    GMAINE_95th_perc
    Shapefile Attribute Table (Source: Esri)
    FID
    Internal feature number. (Source: Esri) Sequential unique whole numbers that are automatically generated.
    Shape
    Feature geometry. (Source: Esri) Coordinates defining the features.
    Year
    This value is the 95th percentile of bottom shear stress calculated for the one year time period of May 1, 2010 through April 30, 2011. The NODATA value is -9999. (Source: USGS)
    Range of values
    Minimum:0.0039
    Maximum:7.7678
    Units:Pa
    Resolution:0.0001
    Winter
    This value is the 95th percentile of bottom shear stress calculated for the period of December 1, 2010 through February 28, 2011. The NODATA value is -9999. (Source: USGS)
    Range of values
    Minimum:0.0033
    Maximum:8.8305
    Units:Pa
    Resolution:0.0001
    Spring
    This value is the 95th percentile of bottom shear stress calculated for the period of March 1, 2011, through April 30, 2011, and May, 2010. The NODATA value is -9999. (Source: USGS)
    Range of values
    Minimum:0.0038
    Maximum:7.6335
    Units:Pa
    Resolution:0.0001
    Summer
    This value is the 95th percentile of bottom shear stress calculated for the period of June 1, 2010, through August 31, 2010. The NODATA value is -9999. (Source: USGS)
    Range of values
    Minimum:0.0039
    Maximum:4.5568
    Units:Pa
    Resolution:0.0001
    Fall
    This value is the 95th percentile of bottom shear stress calculated for the period of September 1, 2010, to November 30, 2010. The NODATA value is -9999. (Source: USGS)
    Range of values
    Minimum:0.0039
    Maximum:8.8316
    Units:Pa
    Resolution:0.0001

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
    • P. Soupy Dalyander
  2. Who also contributed to the data set?
  3. To whom should users address questions about the data?
    P. Soupy Dalyander
    U.S. Geological Survey
    Oceanographer
    600 Fourth Street S
    St Petersburg, FL
    USA

    (727) 502-8000 x8124 (voice)
    (727) 502-8001 (FAX)
    sdalyander@usgs.gov

Why was the data set created?

This GIS layer contains an estimate of the 95th percentile of bottom shear stress for the Gulf of Maine south into the Middle Atlantic Bight. This output is based on statistical characterization of numerical model estimates of wave and circulation patterns over an approximately one year time frame. This data layer is primarily intended to show the overall distribution of the highest stress values on large spatial scales, and should be used qualitatively. Intended users include scientific researchers and the coastal and marine spatial planning community.

How was the data set created?

  1. From what previous works were the data drawn?
    NOAA GFS (source 1 of 4)
    NOAA National Centers for Environmental Prediction (NCEP), 20110601, NOAA/NCEP Global Forecast System (GFS) Atmospheric Model: NOAA National Centers for Environmental Prediction, Camp Springs, MD.

    Online Links:

    Type_of_Source_Media: online
    Source_Contribution:
    The NOAA Global Forecast System (GFS) 0.5 degree model was used to provide wind speed data at 10 m above the sea surface to drive the numerical wave model used to generate bottom orbital wave velocities for calculations of a time-series of bottom shear stress.
    NOAA NAM (source 2 of 4)
    NOAA National Centers for Environmental Prediction (NCEP), 20110601, NOAA/NCEP North American Mesoscale (NAM) Atmospheric Model: NOAA National Centers for Environmental Prediction, Camp Springs, MD.

    Online Links:

    Type_of_Source_Media: online
    Source_Contribution:
    The NOAA North American Mesoscale (NAM) model was used to provide wind speed data at 10 m above the sea surface to drive the numerical wave model used to generate bottom orbital wave velocities for calculations of a time-series of bottom shear stress.
    FVCOM (source 3 of 4)
    University of Massachusetts, Dartmouth, 2014, Finite Volume Coastal Ocean Model, Gulf of Maine (FVCOM-GOM): University of Massachusetts, Dartmouth, Dartmouth, MA.

    Online Links:

    Type_of_Source_Media: online
    Source_Contribution:
    The University of Massachusetts at Dartmouth (UMASSD) FVCOM model archived forecast was used to provide estimates of near-bed current velocity used for calculating the time-series of bottom shear stress. The FVCOM-GOM hydrodynamic model (http://fvcom.smast.umassd.edu/research_projects/GB/index.html) is a sub-model of the Northeast Coastal Ocean Forecast System (NECOFS), operated by UMASSD. This quasi-operational nowcast/forecast system is an element of the Northeastern Regional Association of Coastal Observing Systems (NERACOOS, http://neracoos.org/), part of the U.S. Integrated Ocean Observing System (http://www.ioos.noaa.gov/). The underlying circulation model is the Finite Volume Coastal Ocean Model (FVCOM), a finite-element, unstructured grid, primitive equation ocean model that solves for the free surface elevation and three dimensional flow patterns, temperature, and salinity. The FVCOM-GOM configuration has varying horizontal resolution (0.3-15 km) and 40 layers in vertical terrain-following coordinates. Ocean open boundary values are from a global forecast that uses the HYbrid Coordinate Ocean Model (HyCOM) with assimilation of satellite and in situ data with the Navy Coupled Ocean Data Assimilation (NCODA) system. Tidal harmonic boundary variability is determined from a regional tidal model. The data files for the time period used in this analysis were acquired from an archived data set available online at http://www.smast.umassd.edu:8080/thredds/catalog.html.
    NOAA WW3 (source 4 of 4)
    NOAA National Centers for Environmental Prediction (NCEP, 20110601, NOAA/NWS/NCEP Global Wavewatch III Operational Wave Forecast: NOAA National Centers for Environmental Prediction, Camp Springs, MD.

    Online Links:

    Type_of_Source_Media: online
    Source_Contribution:
    The grids and parameterizations for the global and regional wave model were provided by the NOAA/NWS/NCEP Wavewatch III operational ocean wave forecast.
  2. How were the data generated, processed, and modified?
    Date: 2012 (process 1 of 11)
    The WavewatchIII (WW3) numerical wave model (v3.14) was run on both a global 30' and regional North Atlantic 10' grid. The global grid is identical to the one used by the NOAA WW3 forecast system, whereas the regional grid is based on the NOAA WW3 grid but was modified slightly to remove parts of the "do not compute" mask at the outer boundaries where output was needed to pass to the nested, higher resolution grid. WW3 is a 3rd generation phase-averaged numerical wave model which conserves wave energy subject to generation, dissipation, and transformation processes and resolves spectral energy density over a range of user-specified frequencies and directions. The model was identically configured to the multi-grid system set-up used by the NOAA WW3 operational forecast (more information at http://polar.ncep.noaa.gov/waves/index2.shtml), and was rerun purely to generate full spectra boundary conditions at the boundaries of the higher resolution nested domain. Wind forcing was provided at 3-hour resolution from the NOAA North American Mesoscale (NAM) model (12 km resolution) over its domain, with the rest of the domain (outside the NAM grid) provided by the NOAA Global Forecasting System (GFS) model at 0.5 degree resolution. Person who carried out this activity:
    P. Soupy Dalyander
    U.S. Geological Survey
    Oceanographer
    600 Fourth Street S
    St Petersburg, FL
    USA

    (727) 502-8000 x8124 (voice)
    (727) 502-8001 (FAX)
    sdalyander@usgs.gov
    Data sources used in this process:
    • NOAA GFS
    • NOAA NAM
    • NOAA WW3
    Data sources produced in this process:
    • WW3
    Date: 2012 (process 2 of 11)
    The Simulating WAves Nearshore (SWAN) numerical wave model (version 40.81, modified for proper calculation of RMS bottom orbital velocity and for output of bottom wave direction) was used to create a time-series of bottom orbital velocity, bottom representative period, and bottom wave direction over the one year time period of May, 2010 - May, 2011 in each grid cell in the model domain. The wave model SWAN is a 3rd generation phase-averaged numerical wave model which conserves wave energy subject to generation, dissipation, and transformation processes and resolves spectral energy density over a range of user-specified frequencies and directions. Although stress calculations were only performed over the spatial extent of the hydrodynamic model, SWAN was run over a larger spatial scale. The model domain consists of seven overlapping regular numerical model grids that follow the eastern and Gulf of Mexico coasts of the United States at approximately 3.5 km resolution. The model was run for April 2010 using the default SWAN initial condition formulation for a non-stationary run, e.g., a JONSWAP spectrum from prescribed initial wind conditions, to develop initial conditions for the one year study period (May 2010 to May 2011). Full spectra boundary conditions at each model ocean boundary point are interpolated from the output of the regional 10' Wavewatch III model, updated every hour. Wind forcing was provided at 3-hour resolution from the NOAA North American Mesoscale (NAM) model (12 km resolution) over its domain, with forcing at the most offshore portions of the grid (outside the NAM grid) provided by the NOAA Global Forecasting System (GFS) model at 0.5 degree resolution. The SWAN directional resolution was 6 degrees (60 bins), determined via sensitivity analysis as the coarsest (and hence least computationally expensive) resolution that does not result in the "Garden-Sprinkler Effect" (GSE), wherein swell traveling over large distances inaccurately disintegrates into non-continuous wave fields as a result of frequency and directional discretization. The minimum frequency bin should be set to a value less than 0.7 times the lowest expected peak frequency and the maximum frequency bin should be set at least 2.5-3 times the highest expected peak frequency expected. In order to determine appropriate values, the peak periods from 43 NDBC buoys throughout the wave model domain were analyzed (when available) over the one year period of the study, yielding 297,533 hourly observations. The 99th and 1st percentiles of peak period were 15 s and 3 s, corresponding to frequencies of 0.07 Hz and 0.33 Hz, noting that these values may be biased by buoy limits of detection at high and low frequencies. The frequency range was therefore specified as 0.04-1 Hz. SWAN was allowed to internally determine the frequency resolution as one tenth of each frequency bin for best performance of the discrete interaction approximation (DIA) method of nonlinear 4-wave interactions, resulting in 34 frequency bins. Bottom friction calculations used the Madsen formulation with a uniform roughness length scale of 0.05 m. This value was selected for the best comparison of model output and buoy observations within the domain, and does not correspond to physical roughness values or the bottom roughness used in stress calculations. Wind generation and whitecapping parameterizations follow the modified Komen approach prescribed by Rogers et al. (2003), which reduces inaccurate attenuation of swell energy by whitecapping. Wave model outputs of bottom orbital velocity, bottom representative period, and bottom wave direction were output hourly and interpolated onto the SABGOM model grid. The same person that conducted this processing step conducted each subsequent processing step. References: Rogers, W.E., Hwang, P.A., Wang, D.W., 2003. Investigation of Wave Growth and Decay in the SWAN Model: Three Regional-Scale Applications. J. Phys. Oceanogr. 33, 366-389. Person who carried out this activity:
    P. Soupy Dalyander
    U.S. Geological Survey
    Oceanographer
    600 Fourth Street S
    St Petersburg, FL
    USA

    (727) 502-8000 x8124 (voice)
    (727) 502-8001 (FAX)
    sdalyander@usgs.gov
    Data sources used in this process:
    • NOAA GFS
    • NOAA NAM
    • WW3
    Data sources produced in this process:
    • SWAN WEST ATL
    Date: 2013 (process 3 of 11)
    Use the wave model and current model results to calculate the time series of bottom shear stress within each wave model grid cell using Mathworks MATLAB software (v2011A). Bottom shear stress estimates are made following Grant-Madsen (GM) (Madsen, 1994), from the estimated bottom orbital velocities and bottom wave periods generated with SWAN, and near-bed current estimates from the FVCOM hydrodynamic model. The GM approach relies on an eddy viscosity turbulence closure model and formulates the wave stress, current stress, and combined wave-current bottom stress as functions of a representative bottom wave orbital velocity, representative bottom wave period, current flow at some reference height, the angle between wave and current propagation, and bottom roughness. Full details of the GM formulation may be found elsewhere (Glenn, 1983; Glenn and Grant, 1987; Grant and Madsen, 1979, 1982, 1986; Madsen, 1994; Madsen et al., 1988). Wave direction, bottom orbital velocities, and bottom periods are calculated internally by the wave model. Near-bed current magnitude and direction are taken from the hydrodynamic model, with the reference height taken as the distance from the cell vertical midpoint to the seabed. GM requires that the current velocity be taken above the wave boundary layer (WBL) but within the log-profile current velocity layer. If the thickness of the WBL calculated using GM exceeds one or more of the deepest grid cells, the current estimate and associated reference height are used from the deepest grid cell at each location where the reference height exceeds the width of the WBL. An estimate must be used for the maximum reference height where the log-profile velocity layer assumption is valid. As discussed in Grant and Madsen (1986), the thickness of the log-profile layer based on laboratory experiments is approximately 10% of the current boundary layer thickness (Clauser, 1956). Because tidal currents, storm currents, and mean flow have a boundary layer thickness on the order of magnitude 10's of meters (Goud, 1987), a maximum value for reference height is set as 5 m. The GM bottom boundary layer model also requires a value for bottom roughness; a uniform value of 0.005 m is used throughout the domain. References: Clauser, F.H., 1956. The turbulent boundary layer. Adv. Appl. Mech. 4, 1-51. Madsen, O.S., 1994. Spectral wave-current bottom boundary layer flows, Proceedings 24th Conf. Coastal Eng., pp. 384-398. Glenn, S.M., 1983. A Continental Shelf Bottom Boundary Layer Model: The Effects of Waves, Currents, and a Moveable Bed. Dissertation, Massachusetts Institute of Technology and Woods Hole Oceanographic Institution, Cambridge, MA, 237 pp. Glenn, S.M., Grant, W.D., 1987. A suspended sediment stratification correction for combined wave and current flows. J. Geophys. Res. 92, 8244-8264. Goud, M.R., 1987. Prediction of Continental Shelf Sediment Transport Using a Theoretical Model of the Wave-Current Boundary Layer. Dissertation, Massachusetts Institute of Technology and Woods Hole Oceanographic Institution, Cambridge, MA, 211 pp. Grant, W.D., Madsen, O.S., 1986. The continental-shelf bottom boundary-layer. Annu. Rev. Fluid Mech. 18, 265-305. Grant, W.D., Madsen, O.S., 1982. Movable bed roughness in unsteady oscillatory flow. J. Geophys. Res. 87, 469-481. Grant, W.D., Madsen, O.S., 1979. Combined wave and current interaction with a rough bottom J. Geophys. Res. 84, 1797-1808. Madsen, O.S., 1994. Spectral wave-current bottom boundary layer flows, Proceedings 24th Conf. Coastal Eng., pp. 384-398. Madsen, O.S., Poon, Y., Graber, H.C., 1988. Spectral wave attenuation by bottom friction: theory, Proceedings 21st Int. Conf. Coast. Eng., pp. 492-504. Data sources used in this process:
    • SWAN WEST ATL
    • FVCOM
    Data sources produced in this process:
    • STRESS TSERIES
    Date: 2013 (process 4 of 11)
    Calculate the 95th percentile of bottom shear stress by year and season in Mathworks MATLAB software (v2011A). This value is calculated as the value exceeded by 5% of the data in the time series within each grid cell (e.g., 95% of output points are less than this value). These statistical values are saved in MATLAB .mat format. Data sources used in this process:
    • STRESS TSERIES
    Data sources produced in this process:
    • 95TH STATISTIC
    Date: 2013 (process 5 of 11)
    Export the values for each grid cell from MATLAB format into an ArcGIS shapefile using the Mathworks MATLAB Mapping Toolbox (v2011A). Grid cells where the height of the deepest grid cell in the circulation model is always above the maximum accepted reference height for validity of a log-profile assumption (necessary for stress calculations), as well as grid cells with depth greater than 500 m, are excluded and not exported to Arc. Grid cells with depths of greater than 500 m are excluded. In some cases, data may exist during parts of the year and not others; in this case, the statistic is calculated and included for the season where model output exist, and a missing data value of -9999 (replacing the MATLAB native NaN format) is used for seasons where no valid statistic can be calculated. A geographic data structure is created in MATLAB with the following fields: Geometry ('Polygon'), Lon (the five longitude points defining each grid cell, with one of the four grid corner values repeated to close the polygon in Arc), Lat (same as Lon, for the latitude points of the grid), Year (the statistic calculated for the entire year), Winter (the statistic calculated for December, January, and February), Spring (the statistic calculated for March, April, and May), Summer (the statistic calculated for June, July, and August), and Fall (the statistic calculated for September, October, and November). The shapefile is then written with the "shapewrite" command. Because MATLAB does not assign a projection, the projection corresponding to the projection associated with the bathymetry used in the numerical models is added in ArcCatalog 9.3. The file was then quality checked in ArcMap to insure values were properly exported to the shapefile from MATLAB. Data sources used in this process:
    • 95TH STATISTIC
    Date: 06-Jun-2014 (process 6 of 11)
    Update to metadata only. Onlike linkage corrected from woodshole.er.usgs.gov/project-pages/mobility/ArcData/FVCOM_95th_perc.zip to http://woodshole.er.usgs.gov/project-pages/mobility/ArcData/GMAINE_95th_perc.zip.
    Date: 01-Jul-2016 (process 7 of 11)
    Edits to the metadata were made to fix any errors that MP v 2.9.32 flagged. This is necessary to enable the metadata to be successfully harvested for various data catalogs. In some cases, this meant adding text "Information unavailable" or "Information unavailable from original metadata" for those required fields that were left blank. Other minor edits were probably performed (title, publisher, publication place, etc.). This is an online database - so the series is online database. The metadata standard requires an Issue Identification - so the database title was used. The metadata date (but not the metadata creator) was edited to reflect the date of these changes. The metadata available from a harvester may supersede metadata bundled within a download file. Compare the metadata dates to determine which metadata file is most recent. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Rd.
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 13-Mar-2017 (process 8 of 11)
    Keywords section of metadata optimized for discovery in USGS Coastal and Marine Geology Data Catalog. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Alan O. Allwardt
    Contractor -- Information Specialist
    2885 Mission Street
    Santa Cruz, CA

    831-460-7551 (voice)
    831-427-4748 (FAX)
    aallwardt@usgs.gov
    Date: 26-Apr-2018 (process 9 of 11)
    Added keywords from Coastal and Marine Ecological Classification Standard (CMECS) to metadata. Person who carried out this activity:
    U.S. Geological Survey
    Attn: Alan O. Allwardt
    Contractor -- Information Specialist
    2885 Mission Street
    Santa Cruz, CA

    831-460-7551 (voice)
    831-427-4748 (FAX)
    aallwardt@usgs.gov
    Date: Jun-2020 (process 10 of 11)
    The data release was retroactively assigned a DOI number, and that information was added to the metadata. Additionally, the location of the data release changed, and the metadata links updated accordingly. Other small edits, such as the program name, were also modified. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
    Date: 16-Nov-2021 (process 11 of 11)
    Added keywords section with USGS persistent identifier as theme keyword (20200908). Fixed one of the USGS Thesaurus terms. Person who carried out this activity:
    U.S. Geological Survey
    Attn: VeeAnn A. Cross
    Marine Geologist
    384 Woods Hole Road
    Woods Hole, MA

    508-548-8700 x2251 (voice)
    508-457-2310 (FAX)
    vatnipp@usgs.gov
  3. What similar or related data should the user be aware of?
    U.S. Geological Survey, 2012, Documentation of the U.S. Geological Survey Sea Floor Stress and Sediment Mobility Database: Open-File Report 2012-1137, U.S. Geological Survey, Reston, VA.

    Online Links:

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
    Each attribute in this data layer covers a specific time period of interest. The attributes include winter (December - February), spring (March - May), summer (June - August), fall (September - November), and the entire year. Each of these attributes was calculated from model output spanning May, 2010 to May, 2011. Statistical values will vary somewhat if calculated from model parameters covering a different time period, or if a different numerical model is used to estimate the time-series of waves and circulation used in calculating the time-series of bottom shear stress.
  2. How accurate are the geographic locations?
    Numerical models are used in the generation of time-series of bottom shear stress used in creating this data layer. Because the overall horizontal accuracy of the data set depends on the accuracy of the model, the underlying bathymetry, and forcing values used, and so forth, the spatial accuracy of this data layer cannot be meaningfully quantified. These maps are intended to provide a qualitative and relative regional assessment of bottom shear stress at the approximately 5 km resolution displayed; users are advised not to use the data set to estimate shear stress quantitatively at any specific geographic location.
  3. How accurate are the heights or depths?
  4. Where are the gaps in the data? What is missing?
    All model output values were used in the calculation of this statistic. The statistic was calculated for the date range of May, 2010 to May, 2011, and would potentially vary somewhat if performed on a different time period. The underlying time-series of bottom shear stress was calculated from wave and current estimates generated with numerical models, and would vary if different models are used or if different model inputs (such as bathymetry or forcing winds) or parameterizations were chosen.
  5. How consistent are the relationships among the observations, including topology?
    No duplicate features are present. All polygons are closed, and all lines intersect where intended. No undershoots or overshoots are present.

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints: None
Use_Constraints:
Public domain data from the U.S. Government are freely redistributable with proper metadata and source attribution. Please recognize the U.S. Geological Survey as the originator of the dataset.
  1. Who distributes the data set? (Distributor 1 of 1)
    P. Soupy Dalyander
    U.S. Geological Survey
    Oceanographer
    600 Fourth Street S
    St Petersburg, FL
    USA

    (727) 502-8000 x8124 (voice)
    (727) 502-8001 (FAX)
    sdalyander@usgs.gov
  2. What's the catalog number I need to order this data set? Downloadable Data: Sea Floor Stress and Sediment Mobility Database, 95th percentile of bottom shear stress for the Gulf of Maine south into the Middle Atlantic Bight (FVCOM_95th_perc)
  3. What legal disclaimers am I supposed to read?
    Neither the U.S. Government, the Department of the Interior, nor the USGS, nor any of their employees, contractors, or subcontractors, make any warranty, express or implied, nor assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, nor represent that its use would not infringe on privately owned rights. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by the USGS in the use of these data or related materials. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
  4. How can I download or order the data?
  5. What hardware or software do I need in order to use the data set?
    These data are available in Esri shapefile format. The user must have ArcGIS or ArcView 3.0 or greater software to read and process the data file. In lieu of ArcView or ArcGIS, the user may utilize another GIS application package capable of importing the data. A free data viewer, ArcExplorer, capable of displaying the data is available from Esri at www.esri.com.

Who wrote the metadata?

Dates:
Last modified: 19-Nov-2021
Metadata author:
U.S. Geological Survey
Attn: P. Soupy Dalyander
Oceanographer
600 Fourth Street S
St Petersburg, FL
USA

(727) 502-8000 x8124 (voice)
(727) 502-8001 (FAX)
whsc_data_contact@usgs.gov
Contact_Instructions:
The metadata contact email address is a generic address in the event the metadata contact is no longer with the USGS or the email is otherwise invalid.
Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)
This page is <https://cmgds.marine.usgs.gov/catalog/whcmsc/other_datarelease/DR_P999PY84/GMAINE_95th_perc_meta.faq.html>
Generated by mp version 2.9.50 on Fri Nov 19 13:02:55 2021