Dataset description: Backscatter B [USGS]--Offshore of Carpinteria, California
Geometry
This part of DS 781 presents data for part of the acoustic-backscatter map of the Offshore of Carpinteria map area, California. The raster data file is included in "BackscatterB_USGS_OffshoreCarpinteria.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreCarpinteria/data_catalog_OffshoreCarpinteria.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Cochrane, G.R., Golden, N.E., Phillips, E.L., Ritchie, A.C., Kvitek, R.G., Greene, H.G., Endris, C.A., Seitz, G.G., Sliter, R.W., Erdey, M.D., Wong, F.L., Gutierrez, C.I., Krigsman, L.M., Draut, A.E., and Hart, P.E. (S.Y. Johnson and S.A. Cochran, eds.), 2013, California State Waters Map Series-Offshore of Carpinteria, California: U.S. Geological Survey Scientific Investigations Map 3261, 42 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/sim3261.
The acoustic-backscatter map of the Offshore of Carpinteria map area, California, was generated from backscatter data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). These metadata describe the acoustic-backscatter data collected by the USGS. See "BackscatterA_CSUMB_OffshoreCarpinteria_metadata.txt" metadata for a description of the acoustic-backscatter data collected by CSUMB. The western nearshore area, as well as the western outer shelf area, were mapped by the USGS in 2005 and 2006, using 117-kHz and 234.5-kHz SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. This mapping mission collected acoustic-backscatter data from about the 10-m isobath to about the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level, the frequency used to image the seafloor, the grazing angle, the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness, and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones).