Oil spills

Information resources about both Petroleum and Industrial pollution

18 results listed alphabetically by title.

Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Surf-zone integrated alongshore potential flux for oil-sand balls of varying sizes weighted by probability of wave scenario occurrence

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Laboratory Observations of Variable Size and Shape Particles-Artificial Sand and Oil Agglomerates: November 2016 Video Data

Following marine oil spills, weathered oil can mix with sediment in the surf zone and settle to the seafloor to form mats up to hundreds of meters long. Wave action fragments these mats into 1- to 10-centimeter (cm) diameter sand and oil agglomerates (SOAs). SOAs can persist for years, becoming buried in or exhumed from the seafloor and/or transported cross-shore and alongshore (Dalyander and others, 2015). These fragments are angular near the source mat and become increasingly rounded as they are ...

Info
Laboratory Observations of Variable Size and Shape Particles-Artificial Sand and Oil Agglomerates: June 2017 Velocity Data

Following marine oil spills, weathered oil can mix with sediment in the surf zone and settle to the seafloor to form mats up to hundreds of meters long. Wave action fragments these mats into 1- to 10-centimeter (cm) diameter sand and oil agglomerates (SOAs). SOAs can persist for years, becoming buried in or exhumed from the seafloor and/or transported cross-shore and alongshore (Dalyander and others., 2015). These fragments are angular near the source mat and become increasingly rounded as they are ...

Info
Laboratory Observations of Variable Size and Shape Particles-Artificial Sand and Oil Agglomerates: June 2017 Video Data

Following marine oil spills, weathered oil can mix with sediment in the surf zone and settle to the seafloor to form mats up to hundreds of meters long. Wave action fragments these mats into 1- to 10-centimeter (cm) diameter sand and oil agglomerates (SOAs). SOAs can persist for years, becoming buried in or exhumed from the seafloor and/or transported cross-shore and alongshore (Dalyander and others, 2015). These fragments are angular near the source mat and become increasingly rounded as they are ...

Info
Laboratory Observations of Artificial Sand and Oil Agglomerates Video and Velocity Data: Sea Floor Interaction Experiment Flow Velocity

Weathered oil in the surf-zone after an oil spill may mix with suspended sediments to form sand and oil agglomerates (SOA). Sand and oil agglomerates may form in mats on the scale of tens of meters (m), and may break apart into pieces between 1 and 10 centimeters (cm) in diameter. These more mobile pieces are susceptible to alongshore and cross-shore transport, and lead to beach re-oiling on the time scale of months to years following a spill. The U.S. Geological Survey (USGS) conducted experiments March 10 ...

Info
Laboratory Observations of Artificial Sand and Oil Agglomerates Video and Velocity Data: Sea Floor Interaction Experiment Interpretive Video

Weathered oil in the surf-zone after an oil spill may mix with suspended sediments to form sand and oil agglomerates (SOA). Sand and oil agglomerates may form in mats on the scale of tens of meters (m), and may break apart into pieces between 1 and 10 centimeters (cm) in diameter. These more mobile pieces are susceptible to alongshore and cross-shore transport, and lead to beach re-oiling on the time scale of months to years following a spill. The U.S. Geological Survey (USGS) conducted experiments March 10 ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Ratio of wave- and current-induced shear stress to critical values for oil-sand ball and sediment mobilization

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Surf-zone integrated alongshore potential flux for oil-sand balls

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Ratio of the wave- and current-induced shear stress to the critical value for oil-tar balls and sediment mobilization over a tidal cycle

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Ratio of the wave- and current-induced shear stress to the critical value for oil-tar balls and sediment mobilization weighted by probability of wave scenario occurrence

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Laboratory Observations of Variable Size and Shape Particles-Artificial Sand and Oil Agglomerates: November 2016 Velocity Data

Following marine oil spills, weathered oil can mix with sediment in the surf zone and settle to the seafloor to form mats up to hundreds of meters long. Wave action fragments these mats into 1- to 10-centimeter (cm) diameter sand and oil agglomerates (SOAs). SOAs can persist for years, becoming buried in or exhumed from the seafloor and/or transported cross-shore and alongshore (Dalyander and others, 2015). These fragments are angular near the source mat and become increasingly rounded as they are ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Significant wave height

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: peak wave period

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Locations of convergences in the maximum alongshore current

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: Locations of decelerations in the direction of flow in the maximum alongshore current

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Scenarios_Grid

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Tidal_Grid

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info
Hydrodynamic and Sediment Transport Model Application for OSAT3 Guidance: wave direction

The U.S. Geological Survey has developed a method for estimating the mobility and potential alongshore transport of heavier-than-water sand and oil agglomerates (tarballs or surface residual balls, SRBs). During the Deepwater Horizon spill, some oil that reached the surf zone of the northern Gulf of Mexico mixed with suspended sediment and sank to form sub-tidal mats. If not removed, these mats can break apart to form SRBs and subsequently re-oil the beach. A method was developed for estimating SRB ...

Info