This portion of the USGS data release presents gridded bathymetry data derived from repeated bathymetric surveys conducted by the U.S. Army Corps of Engineers Portland District on the Pacific Ocean, Washington. Repeated surveys were performed between September 9, 2020, and March 10, 2021, from a vessel equipped with a multi-beam bathymetry system to characterize the morphology and dispersal of a nearshore berm composed of sediment dredged from the navigational channel at the mouth of the Columbia River. ...

A three-dimensional hydrodynamic and sediment transport model application of the mouth of the Columbia River (MCR) was constructed using the Delft3D4 (D3D) modeling suite (Deltares, 2021) to simulate water levels, flow, waves, and sediment transport for time period of September 22, 2020, to March 10, 2021. The model was used to predict the dispersal of sediment from a submerged, nearshore berm composed of sediment that was dredged from the entrance to the MCR navigation channel and placed on the northern ...

Bathymetry and seafloor acoustic backscatter data were collected at four sites (SKM, SLG, LDB, WLW) using a SWATHPlus interferometric sonar (234 kHz) pole mounted to the R/V Parke Snavely during a June 2021 survey of the lower Columbia River, Washington and Oregon. Each site was surveyed repeatedly between June 5 and June 9, 2021 to quantify bathymetric changes resulting from migration of subaqueous sand dunes. The bathymetry and seafloor acoustic backscatter data from each site are provided as GeoTIFF ...

In situ seafloor images were acquired at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, with an underwater camera system between June 5 and June 8, 2021. Between 248 and 427 digital images of the sediment surface were collected at each site with an underwater camera system that was repeatedly lowered to the seabed along a series of 1 km-long transects oriented along the main navigation channel and spaced about 60 m apart. The camera consisted of a FLIR Blackfly BFS-PGE ...

This dataset contains surface sediment grain diameter measurements from in situ seafloor images collected in the lower Columbia River, Washington and Oregon, in 2021. Surface sediment grain diameters were derived from manual measurements (or "point counts") in a subset of images used to calibrate and validate an automated image processing algorithm to determine surface sediment grain size distributions. For each calibration and validation image that was selected, the long and short axis of 100 grains were ...

This dataset contains surface sediment grain size distributions derived from automated image processing of in situ seafloor images obtained with an underwater camera system at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, in 2021. The surface sediment grain size distribution data are provided in comma-separated text (.csv) format for each site and for data used in calibration and validation of the automated image processing technique.

This dataset contains surface sediment grain size distributions derived from manual point counts of in situ seafloor images obtained with an underwater camera system in the lower Columbia River, Washington and Oregon, in 2021. The distributions derived from manual point counts were compared with results from an automated image processing technique to calibrate and validate the automated method used to quantify surface sediment grain size distributions in objective images. The surface sediment grain size ...

This dataset contains water velocity data derived from spatial surveys performed with a vessel-mounted acoustic Doppler current profiler at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, in 2021. The data are provided in netCDF (.nc) format and compressed into .zip archives for each site.