This portion of the data release contains information on cores that were collected by the U.S. Geological Survey in Kahana Valley, O'ahu, Hawaii in 2015 and 2017. Sites were cored in order to describe wetland stratigraphy and to identify potential tsunami deposits. These cores contain mud, peat, fluvial sands, and marine carbonate sands, reflecting deposition in a variety of coastal environments. PDF files describe twenty-four (24) gouge and ‘Russian’ cores (hand held, side-filling peat augers) that ...

This portion of the data release presents radiocarbon age data from 66 samples collected from Anahola Valley (Kaua'i), Kahana Valley (O'ahu), and Pololu Valley (Hawai'i). Sample ages were determined by the National Ocean Sciences Accelerator Mass Spectrometry (NOSAMS) facility. The data are provided in a comma-delimited spreadsheet (.csv).

This portion of the data release contains information on vibracores that were collected by the U.S. Geological Survey in Anahola Valley, Kaua'i, Hawai'i in 2015. Sites were cored in order to identify potential tsunami deposits and describe wetland stratigraphy. These vibracores contain mud, peat, volcanic sands, and carbonate sands, reflecting deposition in a variety of coastal environments. PDF files describe eight (8) vibracores that were split, imaged by a line-scanner camera, scanned to generate ...

This portion of the data release contains information on vibracores that were collected by the U.S. Geological Survey in Pololu Valley, Island of Hawai'i in 2014. Five sites were cored in order to describe wetland stratigraphy and to identify potential tsunami deposits. These vibracores contain mud, peat, fluvial sands, and marine volcanic sands, reflecting deposition in a variety of coastal environments. Two (2) pdf files (VC1.pdf, VC2.pdf) describe vibracores that were split, imaged by a line-scanner ...

The 14 January 2022 eruption of Tonga Hunga-Tonga Ha'apai volcano generated tsunamis that impacted the west coast of the United States on the morning of 15 January 2022. This data release presents runup heights and tsunami heights collected by the U.S. Geological Survey (USGS) and the California Geological Survey (CGS) during surveys at the Santa Cruz Harbor and beaches in Santa Cruz County, California, on January 19th and 20th, 2022 (USGS Field Activity 2022-607-FA). Evidence of tsunami inundation included ...

This portion of the data release presents computed tomography (CT) images from vibracores collected from Searsville Lake, Jasper Ridge Biological Preserve, Stanford, California in October 2018 (USGS Field Activity 2018-682-FA). A Geotek Rotating X-Ray CT (RXCT) system was used to acquire x-ray images and perform CT reconstructions of unsplit core segments. The full three-dimensional data set consists of individual axial slices which are reconstructed images in TIFF format. These axial slices are oriented ...

This portion of the data release presents measurements and data from two vibracores (JRBP2018-VC01A and JRBP2018-VC01B) collected from Searsville Lake, a reservoir in the Jasper Ridge Biological Preserve, Stanford, California, on October 29, 2018 (USGS Field Activity 2018-682-FA). Vibracoring introduced significant amounts of sediment compaction. The core depths in other datasets of this data release are not corrected for compaction. Translated depths are provided in this portion of the data release that ...

This portion of the data release presents gamma-ray bulk density measurements of vibracore JRBP2018-VC01B collected from Searsville Lake, Jasper Ridge Biological Preserve, Stanford, California in October 2018 (USGS Field Activity 2018-682-FA). The gamma-ray bulk density data are provided in a comma-delimited file (.csv).

This portion of the data release presents linescan images (photographs) from vibracores collected from Searsville Lake, a reservoir in Jasper Ridge Biological Preserve, Stanford, California in October 2018 (USGS Field Activity 2018-682-FA). Images were obtained from two vibracores (JRBP2018-VC01A and JRBP2018-VC01B) at 50-micron (200 pixel per cm) resolution. Color images in 16-bit TIFF format are provided for each core segment, along with proprietary metadata files containing image scaling information.

This portion of the data release presents sediment grain-size data from vibracores collected from Searsville Lake, Jasper Ridge Biological Preserve, Stanford, California in October 2018 (USGS Field Activity 2018-682-FA). In total, 36 samples were subsampled from two vibracores: JRBP2018-VC01A and JRBP2018-VC01B. The grain-size distributions of samples were determined using standard techniques developed by the USGS Pacific Coastal and Marine Science Center sediment lab. The grain-size data are provided in a ...

This portion of the data release presents X-ray Flourescence (XRF) data from vibracores collected from Searsville Lake, a reservoir in Jasper Ridge Biological Preserve, Stanford, California in October 2018 (USGS Field Activity 2018-682-FA). The XRF data are provided in comma-delimited files (.csv), one per core.

This portion of the USGS data release presents acoustic-backscatter data collected during surveys performed in Floras Lake, Oregon in June 2018 (USGS Field Activity Number 2018-636-FA). Lake bed backscatter data were collected using a personal watercraft (PWC) equipped with a sidescan sonar system and global navigation satellite system (GNSS) receivers. The sonar system consisted of a Tritech Starfish 990F with a 1-MHz transducer and a 0.3-degree horizontal beam width. Output from the GNSS receivers and ...

This portion of the USGS data release presents bathymetry data collected during surveys performed in Floras Lake, Oregon in June 2018 (USGS Field Activity Number 2018-636-FA). Floras Lake is a coastal lake in southern Oregon that is separated from the Pacific Ocean by sand dunes. It is not influenced by tides, although water levels fluctuate seasonally. Lake bed bathymetry data were collected using two personal watercraft (PWCs) equipped with single-beam sonar systems and global navigation satellite system ...

This portion of the data release presents sediment grain-size data from samples collected from Anahola Valley, Kaua`i, Hawai`i in November, 2015 (USGS Field Activity 2015-671-FA). 63 sand and mud samples were taken from sediment cores that were collected using a Russian corer (a hand-held, side-filling peat auger) from two site locations. Site locations were determined using a hand-held global navigation satellite system, GNSS. The grain-size distributions of samples were determined using standard ...

This portion of the USGS data release describes the Delft3D-FLOW model application for propagating simulated tsunamis from 15 hypothetical earthquake sources of the Cascadia Subduction Zone through a series of nested grids to modeling tsunami sediment transport in the Salmon River estuary, OR. Input files necessary to run the Delft3D-FLOW model are provided. The model application was constructed using Delft3D-FLOW. Zip files containing model setup data are provided for each of the nested hydrodynamic grids ...

This portion of the data release presents sediment grain-size data from cores and surface samples collected from the Salmon River estuary in 2017 and 2018. In total, 60 samples were collected from 18 sites containing sandy sediment from the circa 1700 CE tsunami deposit, two sites with post-1700 CE silt, and eight modern surface sample sites. The grain-size distributions of samples were determined using standard techniques developed by the USGS Pacific Coastal and Marine Science Center sediment lab. The ...

This portion of the data release provides the spatial thickness distribution of sandy deposits inferred to have been deposited at the Salmon River, OR by a circa 1700 CE tsunami. Data were collected by describing hand-operated gouge cores at 129 sites in 2017 and 2018, and supplemented by 114 core descriptions from 1987 (Nelson and others, 2004).

This data release contains information on computed tomography (CT) images of a vibracore that was collected by the U.S. Geological Survey in 2019. A site next to the San Lorenzo River in Henry Cowell Redwoods State Park, California, was cored to understand the history of recent vertical incision and floodplain abandonment. The core was split into 3 segments after collection. Each segment was scanned using a Geotek Rotating X-ray CT (RXCT) System and CT reconstruction was performed using Geotek ...

This dataset includes computed tomography (CT) scans of sediment cores collected from coastal environments on Montague Island, Alaska. The cores were collected with hand driven peat augers to assess environmental changes related to tectonic uplift caused by historic and prehistoric earthquakes.

This dataset includes locations of sediment cores collected from coastal environments on Montague Island, Alaska. The cores were collected with hand driven peat augers to assess environmental changes related to tectonic uplift caused by historic and prehistoric earthquakes.

This dataset presents core information such as core IDs, section numbers, lengths, depth intervals, and locations from sediment cores collected in southern Cascadia (offshore northern California) aboard the M/V Bold Horizon in September-October 2019. An inventory of core section CT, MSCL, and photograph scan files available in this data release are listed here.

This dataset includes computed tomography (CT) scan imagery of sediment cores collected in southern Cascadia (offshore northern California) aboard the M/V Bold Horizon in September-October 2019.

This dataset includes multi-sensor core logger (MSCL) data of sediment cores collected in southern Cascadia (offshore northern California) aboard the M/V Bold Horizon in September-October 2019.

This dataset includes photographs (linescan images) of sediment cores collected in southern Cascadia (offshore northern California) aboard the MV Bold Horizon in September-October 2019.

This dataset presents radiocarbon data from 87 samples from sediment cores collected in southern Cascadia (offshore northern California) aboard the M/V Bold Horizon in September-October 2019. Sample ages were determined by the National Ocean Sciences Accelerator Mass Spectrometry (NOSAMS) facility and the W.M. Keck Carbon Cycle Accelerator Mass Spectrometry (KCCAMS) facility at the University of California, Irvine (UCI).

This dataset presents specific activities of cesium-137 in picoCuries per gram from sediment cores collected from Cargill Marsh, South San Francisco Bay, California on June 21, 2022, and December 14, 2023. The cores were collected with hand driven push cores to assess sediment accumulation on the marsh.

This dataset includes computed tomography (CT) scans of sediment cores collected from Cargill Marsh, South San Francisco Bay, California on June 21, 2022, and December 14, 2023. The cores were collected with hand driven push cores to assess sediment accumulation on the marsh. CT images are provided in the original 16-bit grayscale TIFF format.

This dataset presents core information such as core IDs, core lengths, depth intervals, and locations from sediment cores collected from Cargill Marsh, South San Francisco Bay, California on June 21, 2022, and December 14, 2023. The cores were collected with hand driven push cores to assess sediment accumulation on the marsh.

This dataset includes photographs (linescan images) of sediment cores collected from Cargill Marsh, South San Francisco Bay, California on June 21, 2022, and December 14, 2023. The cores were collected with hand driven push cores to assess sediment accumulation on the marsh.

Boomer seismic-reflection data and associated navigation files were collected in Ozette Lake, Washington, in 2019 for use in regional earthquake hazard assessments relating the Cascadia Subduction Zone.

Chirp seismic reflection data and associated navigation files were collected in Ozette Lake, Washington, in 2019 for use in regional earthquake hazard assessments relating the Cascadia Subduction Zone. Dataset includes both raw and processed chirp data.

Sediment cores were collected in Ozette Lake, Washington, from 2019 to 2021. Cores were scanned using Computed Tomography (CT). These data were used to investigate submarine landslide deposits triggered by large Cascadia Subduction Zone earthquakes.

Sediment cores and sub-bottom profiles were collected in Ozette Lake, Washington, from 2019 to 2021. These data were used to investigate submarine landslide deposits triggered by large Cascadia Subduction Zone earthquakes.

Grainsize data were collected from select sediment cores from Ozette Lake, Washington, in 2019. These data were used to investigate submarine landslide deposits triggered by large Cascadia Subduction Zone earthquakes.

This dataset includes multi-sensor core logger (MSCL) data from sediment cores collected in Lake Ozette, Washington. The sediment cores were collected during USGS field activities 2019-622-FA and 2021-641-FA for investigating submarine landslide deposits triggered by large Cascadia Subduction Zone earthquakes.

Seismic-reflection data and cores were collected in Ozette Lake, Washington, from 2019 to 2021. These data were used to investigate submarine landslide deposits triggered by large Cascadia Subduction Zone earthquakes.

Seismic reflection data and cores were collected in Ozette Lake, Washington, in 2019. Radiocarbon samples were taken from cores in select locations. These data were used to investigate submarine landslide deposits triggered by large Cascadia Subduction Zone earthquakes.

Sediment cores were collected in Ozette Lake, Washington, in 2019, and cores were scanned using X-ray fluorescence (XRF). These data were used to investigate submarine landslide deposits triggered by large Cascadia Subduction Zone earthquakes.