Sand deposits

Deposits of loose particles of rock or mineral (sediment) that range in size from 0.0625-2.0 millimeters in diameter.
Subtopics:
(none)

36 results listed by similarity [list alphabetically]
National Assessment of Hurricane-Induced Coastal Erosion Hazards: 2021 Update

This dataset contains information on the probabilities of hurricane-induced erosion (collision, inundation and overwash) for each 1-kilometer (km) section of the United States [Gulf of Mexico and Atlantic] coast for category 1-5 hurricanes. The analysis is based on a storm-impact scaling model that uses observations of beach morphology combined with sophisticated hydrodynamic models to predict how the coast will respond to the direct landfall of category 1-5 hurricanes. Hurricane-induced water levels, due ...

Info
Foraminifera biostratigraphy of sediment cores from the New England Mud Patch collected on USGS Field Activity 2016-001-FA

Variability in sediment properties with depth and the thickness of individual sedimentary layers are critical determinants of seabed acoustic response. The New England Mud Patch (NEMP), located south of Cape Cod, is an unusual feature on the U.S. Continental Shelf in that it is composed of fine-grained sediment layers containing a relatively-homogeneous mix of sand, silt, and clay-sized particles bounded by more typical sandy shelf sediments. The unique characteristics and nature of this deposit is due to ...

Info
Raw X-ray diffraction data of cores from the New England Mud Patch collected on USGS Field Activity 2016-001-FA

Variability in sediment properties with depth and the thickness of individual sedimentary layers are critical determinants of seabed acoustic response. The New England Mud Patch (NEMP), located south of Cape Cod, is an unusual feature on the U.S. Continental Shelf in that it is composed of fine-grained sediment layers containing a relatively-homogeneous mix of sand, silt, and clay-sized particles bounded by more typical sandy shelf sediments. The unique characteristics and nature of this deposit is due to ...

Info
Visual description sheets of sediment cores from the New England Mud Patch collected on USGS Field Activity 2016-001-FA

Variability in sediment properties with depth and the thickness of individual sedimentary layers are critical determinants of seabed acoustic response. The New England Mud Patch (NEMP), located south of Cape Cod, is an unusual feature on the U.S. Continental Shelf in that it is composed of fine-grained sediment layers containing a relatively-homogeneous mix of sand, silt, and clay-sized particles bounded by more typical sandy shelf sediments. The unique characteristics and nature of this deposit is due to ...

Info
Undrained shear strength of sediment cores from the New England Mud Patch collected on USGS Field Activity 2016-001-FA

Variability in sediment properties with depth and the thickness of individual sedimentary layers are critical determinants of seabed acoustic response. The New England Mud Patch (NEMP), located south of Cape Cod, is an unusual feature on the U.S. Continental Shelf in that it is composed of fine-grained sediment layers containing a relatively-homogeneous mix of sand, silt, and clay-sized particles bounded by more typical sandy shelf sediments. The unique characteristics and nature of this deposit is due to ...

Info
Summary of analytical data for sediment cores from the New England Mud Patch collected on USGS Field Activity 2016-001-FA

Variability in sediment properties with depth and the thickness of individual sedimentary layers are critical determinants of seabed acoustic response. The New England Mud Patch (NEMP), located south of Cape Cod, is an unusual feature on the U.S. Continental Shelf in that it is composed of fine-grained sediment layers containing a relatively-homogeneous mix of sand, silt, and clay-sized particles bounded by more typical sandy shelf sediments. The unique characteristics and nature of this deposit is due to ...

Info
High-resolution magnetic susceptibility of sediment cores from the New England collected on USGS Field Activity 2016-001-FA

Variability in sediment properties with depth and the thickness of individual sedimentary layers are critical determinants of seabed acoustic response. The New England Mud Patch (NEMP), located south of Cape Cod, is an unusual feature on the U.S. Continental Shelf in that it is composed of fine-grained sediment layers containing a relatively-homogeneous mix of sand, silt, and clay-sized particles bounded by more typical sandy shelf sediments. The unique characteristics and nature of this deposit is due to ...

Info
Grain size analyses of sediment cores from the New England Mud Patch collected on USGS Field Activity 2016-001-FA

Variability in sediment properties with depth and the thickness of individual sedimentary layers are critical determinants of seabed acoustic response. The New England Mud Patch (NEMP), located south of Cape Cod, is an unusual feature on the U.S. Continental Shelf in that it is composed of fine-grained sediment layers containing a relatively-homogeneous mix of sand, silt, and clay-sized particles bounded by more typical sandy shelf sediments. The unique characteristics and nature of this deposit is due to ...

Info
Water content and grain density analyses of sediment cores from the New England Mud Patch collected on USGS Field Activity 2016-001-FA

Variability in sediment properties with depth and the thickness of individual sedimentary layers are critical determinants of seabed acoustic response. The New England Mud Patch (NEMP), located south of Cape Cod, is an unusual feature on the U.S. Continental Shelf in that it is composed of fine-grained sediment layers containing a relatively-homogeneous mix of sand, silt, and clay-sized particles bounded by more typical sandy shelf sediments. The unique characteristics and nature of this deposit is due to ...

Info
Location and analysis of sediment samples collected in 2014 by the U.S. Geological Survey offshore of Fire Island, NY (Esri point shapefile, GCS WGS 84)

The U.S. Geological Survey (USGS) conducted a geophysical and sampling survey in October 2014 that focused on a series of shoreface-attached ridges offshore of western Fire Island, NY. Seismic-reflection data, surficial grab samples and bottom photographs and video were collected along the lower shoreface and inner continental shelf. The purpose of this survey was to assess the impact of Hurricane Sandy on this coastal region. These data were compared to seismic-reflection and surficial sediment data ...

Info
usSEABED PaRSed data for the entire U.S. Gulf of Mexico and Caribbean (GMX_PRS, Puerto Rico and U.S. Virgin Islands)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the parsed (PRS) output of the dbSEABED mining software. It contains the results of parsing descriptions in the data resources. The PRS data is less precise because it comes from word-based descriptions, but will include information on outsized elements, consolidation that are not usually in EXT data.

Info
usSEABED facies data for the entire U.S. Gulf of Mexico and Caribbean (GMX_FAC, Puerto Rico and U.S. Virgin Islands)

The facies data layer (_FAC.txt) is a point coverage of known sediment samplings, inspections, and probings from the usSEABED data collection and integrated using the software system dbSEABED. The facies data layer (_FAC.txt)represents concatenated information about components (minerals and rock type), genesis (igneous, metamorphic, carbonate, terrigenous), and other appropriate groupings of information about the seafloor. The facies data are parsed from written descriptions from cores, grabs, photographs, ...

Info
usSEABED EXTracted data for the entire U.S. Gulf of Mexico and Caribbean (GMX_EXT, Puerto Rico and U.S. Virgin Islands)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the extracted (EXT) output of the dbSEABED mining software. It contains data items which were simply extracted from the data resources through data mining. The EXT data is usually based on instrumental analyses (probe or laboratory) but may apply to just a subsample of the sediment (eg. no large shells).

Info
usSEABED component and features data for the entire U.S. Gulf of Mexico and Caribbean (GMX_CMP, Puerto Rico and U.S. Virgin Islands)

This component data layer (_CMP.txt) file gives information about selected components (minerals, rock type, microfossils, benthic biota) and seafloor features (bioturbation, structure, ripples) at a given site. Values in the attribute fields represent the membership to that attribute's fuzzy set. For components such as minerals, rocks, micro-biota and plants, and/or epifauna and infauna, corals and other geologic and biologic information, the value depends on sentence structure and other components in ...

Info
usSEABED CaLCulated data for the entire U.S. Gulf of Mexico and Caribbean (GMX_CLC, Puerto Rico and U.S. Virgin Islands)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the calculated (CLC) output of the dbSEABED mining software. It contains results from calculating variables using empirical functions working on the results of extraction or parsing. The CLC data is the most derivative and certainly the least accurate; however, many clients appreciate that it extends the ...

Info
usSEABED facies data for the entire U.S. Atlantic Coast (ATL_FAC)

The facies data layer (_FAC.txt) is a point coverage of known sediment samplings, inspections, and probings from the usSEABED data collection and integrated using the software system dbSEABED. The facies data layer (_FAC.txt)represents concatenated information about components (minerals and rock type), genesis (igneous, metamorphic, carbonate, terrigenous), and other appropriate groupings of information about the seafloor. The facies data are parsed from written descriptions from cores, grabs, photographs, ...

Info
usSEABED component and features data for the entire U.S. Atlantic Coast (ATL_CMP)

This component data layer (_CMP.txt) file gives information about selected components (minerals, rock type, microfossils, benthic biota) and seafloor features (bioturbation, structure, ripples) at a given site. Values in the attribute fields represent the membership to that attribute's fuzzy set. For components such as minerals, rocks, micro-biota and plants, and/or epifauna and infauna, corals and other geologic and biologic information, the value depends on sentence structure and other components in ...

Info
Bulk organics and carbonate content of sediment cores from the New England Mud Patch collected on USGS Field Activity 2016-001-FA

Variability in sediment properties with depth and the thickness of individual sedimentary layers are critical determinants of seabed acoustic response. The New England Mud Patch (NEMP), located south of Cape Cod, is an unusual feature on the U.S. Continental Shelf in that it is composed of fine-grained sediment layers containing a relatively-homogeneous mix of sand, silt, and clay-sized particles bounded by more typical sandy shelf sediments. The unique characteristics and nature of this deposit is due to ...

Info
Sediment Texture of the Sea Floor offshore of western and southern Martha's Vineyard and north of Nantucket, Massachusetts

Geologic, sediment texture, and physiographic zone maps characterize the sea floor south and west of Martha's Vineyard and north of Nantucket, Massachusetts. These maps were derived from interpretations of seismic-reflection profiles, high-resolution bathymetry, acoustic-backscatter intensity, bottom photographs, and surficial sediment samples. The interpretation of the seismic stratigraphy and mapping of glacial and Holocene marine units provided a foundation on which the surficial maps were created. This ...

Info
usSEABED PaRSed data for the entire U.S. Atlantic Coast (ATL_PRS)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the parsed (PRS) output of the dbSEABED mining software. It contains the results of parsing descriptions in the data resources. The PRS data is less precise because it comes from word-based descriptions, but will include information on outsized elements, consolidation that are not usually in EXT data.

Info
usSEABED EXTracted data for the entire U.S. Atlantic Coast (ATL_EXT)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the extracted (EXT) output of the dbSEABED mining software. It contains data items which were simply extracted from the data resources through data mining. The EXT data is usually based on instrumental analyses (probe or laboratory) but may apply to just a subsample of the sediment (eg. no large shells).

Info
usSEABED CaLCulated data for the entire U.S. Atlantic Coast (ATL_CLC)

This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the calculated (CLC) output of the dbSEABED mining software. It contains results from calculating variables using empirical functions working on the results of extraction or parsing. The CLC data is the most derivative and certainly the least accurate; however, many clients appreciate that it extends the ...

Info
Hurricane Zeta Overwash Extents

The National Assessment of Coastal Change Hazards project exists to understand and predict storm impacts to our nation's coastlines. This geospatial dataset defines the alongshore extent of overwash sediments deposited along the Louisiana coast and attributed to coastal processes during [Atlantic Basin] Hurricane Zeta, which made landfall in the U.S. on October 28, 2020.

Info
Hurricane Sally Overwash Extents

The National Assessment of Coastal Change Hazards project exists to understand and predict storm impacts to our nation's coastlines. This geospatial dataset defines the alongshore extent of overwash sediments deposited along the Florida and Alabama coast and attributed to coastal processes during [Atlantic Basin] Hurricane Sally, which made landfall in the U.S. on September 16, 2020.

Info
Hurricane Michael Overwash Extents (version 2.0, 20210916)

The National Assessment of Coastal Change Hazards project exists to understand and predict storm impacts to our nation's coastlines. This geospatial dataset defines the Florida coast and attributed to coastal processes during [Atlantic Basin] Hurricane Michael, which made landfall in the U.S. on October 10, 2018.

Info
Hurricane Matthew Overwash Extents (version 2.0, 20210916)

The National Assessment of Coastal Change Hazards project exists to understand and predict storm impacts to our nation's coastlines. This geospatial dataset defines the alongshore extent of overwash sediments deposited along the Florida, Georgia, North Carolina,and South Carolina coasts and attributed to coastal processes during [Atlantic Basin] Hurricane Matthew, which made landfall in the U.S. on October 8, 2018.

Info
Hurricane Laura Overwash Extents

The National Assessment of Coastal Change Hazards project exists to understand and predict storm impacts to our nation's coastlines. This geospatial dataset defines the alongshore extent of overwash sediments deposited along the Louisiana coast and attributed to coastal processes during [Atlantic Basin] Hurricane Laura, which made landfall in the U.S. on August 27, 2020.

Info
Hurricane Irma Overwash Extents (version 2.0, 20210916)

The National Assessment of Coastal Change Hazards project exists to understand and predict storm impacts to our nation's coastlines. This geospatial dataset defines the alongshore extent of overwash sediments deposited along the Florida coast and attributed to coastal processes during [Atlantic Basin] Hurricane Irma, which made landfall in the U.S. on September 9, 2017.

Info
Hurricane Florence Overwash Extents

The National Assessment of Coastal Change Hazards project exists to understand and predict storm impacts to our nation's coastlines. This geospatial dataset defines the alongshore extent of overwash sediments deposited along the southeast coast of the United States from North Carolina to Virginia and attributed to coastal processes during [Atlantic Basin] Hurricane Florence, which made landfall in the U.S. on September 14, 2018.

Info
Hurricane Delta Overwash Extents

The National Assessment of Coastal Change Hazards project exists to understand and predict storm impacts to our nation's coastlines. This geospatial dataset defines the alongshore extent of overwash sediments deposited along the Louisiana coast and attributed to coastal processes during [Atlantic Basin] Hurricane Delta, which made landfall in the U.S. on October 9, 2020.

Info
Sediment deposition in the Elwha River estuary, Washington, measured on rod surface elevation tables (RSETs) from 2011 to 2014

This portion of the data release presents sediment deposition in the estuary as measured using rod surface elevation tables (RSETs) at fifteen locations throughout the Elwha River estuary, Washington, from August 2011 to June 2014 (no associated USGS Field Activities numbers because data were collected predominantly by biologists from the Lower Elwha Klallam Tribe). The locations of the RSETs were determined with a hand-held global positioning system (GPS). We measured sediment deposition from 2011 to 2013 ...

Info
PAC_PRS - Parsed seabed data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_prs.txt)

This data layer (PAC_PRS.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific continental margin integrated using the dbSEABED software system. This data layer represents the parsed (PRS) output of the dbSEABED mining software. It contains the numeric results parsed from text-based descriptions held in the data resource files (DRF). Because it relies on descriptions, the PRS data are less precise than the extracted data ...

Info
PAC_FAC: Seabed facies data (combined components) for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_fac.txt)

The facies data layer (PAC_FAC.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific margin, integrated using the software system dbSEABED. The facies data layer (PAC_FAC.txt) represents concatenated information about components (minerals and rock type), genesis (igneous, metamorphic, carbonate, terrigenous), and other appropriate groupings of information about the sea floor. These data are parsed from written ...

Info
PAC_EXT - Extracted seabed data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_ext.txt)

This data layer (PAC_EXT.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific continental margin integrated using the software system dbSEABED. This data layer represents the extracted (EXT) output of the dbSEABED mining software and contains data items which were extracted from the data resources files and generally represent lab-based analytical data. The EXT data are usually considered the most rigorous data ...

Info
Seabed component and feature data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_cmp.txt)

This data layer (PAC_CMP.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific continental margin integrated using the software system dbSEABED. This data file gives numeric data about selected components (for example, minerals, rock type, microfossils, and benthic biota) and sea floor features (for example, bioturbation, structure, and ripples) at a given site. Values in the attribute fields represent the membership to ...

Info
PAC_CLC: Calculated seabed data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_clc.txt)

This data layer (PAC_CLC.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S Pacific continental margin integrated using the software system dbSEABED. This data layer represents the calculated (CLC) output of the dbSEABED mining software. Data in this file extend variables determined through the data extraction (EXT) and data parsing (PRS) processes of dbSEABED, calculated using empirical relations or known functions. The CLC ...

Info