Suspended sediment concentration (SSC) in the San Lorenzo River, Santa Cruz, California, USA, from 2008 to 2019
Suspended-sediment concentrations are reported in mg/L for water samples collected from the San Lorenzo River during the rainy seasons from 2008 to 2019. Samples were collected during 2-, 5- and 10-year flood events. |
Info |
Polycyclic aromatic hydrocarbons (PAHs) in the San Lorenzo River, Santa Cruz, California, USA, from 2015 to 2016
Polycyclic aromatic hydrocarbons (PAHs) are reported for water samples collected from the San Lorenzo River water during the rainy seasons from 2015 to 2016. Samples were collected during 2-, 5- and close to 10 year flood events. |
Info |
Water quality in the Elwha River estuary, Washington, from 2006 to 2014.
This portion of the data release presents water column dissolved nutrient concentration data and water quality parameters from samples collected in the Elwha River estuary, Washington, in 2006, 2007, 2013, and 2014 (USGS Field Activities L-15-13-PS, L-24-13-PS, T-R5-13-PS, T-R6-13-PS, T-RA-14-PS, 2014-614-FA, 2014-628-FA, 2014-633-FA, 2014-666-FA). Water column samples were collected by hand in acid-washed opaque bottles from multiple locations. Water quality was measured using a handheld Hydolab Data Sonde ... |
Info |
usSEABED PaRSed data for the entire U.S. Gulf of Mexico and Caribbean (GMX_PRS, Puerto Rico and U.S. Virgin Islands)
This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the parsed (PRS) output of the dbSEABED mining software. It contains the results of parsing descriptions in the data resources. The PRS data is less precise because it comes from word-based descriptions, but will include information on outsized elements, consolidation that are not usually in EXT data. |
Info |
usSEABED facies data for the entire U.S. Gulf of Mexico and Caribbean (GMX_FAC, Puerto Rico and U.S. Virgin Islands)
The facies data layer (_FAC.txt) is a point coverage of known sediment samplings, inspections, and probings from the usSEABED data collection and integrated using the software system dbSEABED. The facies data layer (_FAC.txt)represents concatenated information about components (minerals and rock type), genesis (igneous, metamorphic, carbonate, terrigenous), and other appropriate groupings of information about the seafloor. The facies data are parsed from written descriptions from cores, grabs, photographs, ... |
Info |
usSEABED EXTracted data for the entire U.S. Gulf of Mexico and Caribbean (GMX_EXT, Puerto Rico and U.S. Virgin Islands)
This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the extracted (EXT) output of the dbSEABED mining software. It contains data items which were simply extracted from the data resources through data mining. The EXT data is usually based on instrumental analyses (probe or laboratory) but may apply to just a subsample of the sediment (eg. no large shells). |
Info |
usSEABED component and features data for the entire U.S. Gulf of Mexico and Caribbean (GMX_CMP, Puerto Rico and U.S. Virgin Islands)
This component data layer (_CMP.txt) file gives information about selected components (minerals, rock type, microfossils, benthic biota) and seafloor features (bioturbation, structure, ripples) at a given site. Values in the attribute fields represent the membership to that attribute's fuzzy set. For components such as minerals, rocks, micro-biota and plants, and/or epifauna and infauna, corals and other geologic and biologic information, the value depends on sentence structure and other components in ... |
Info |
usSEABED CaLCulated data for the entire U.S. Gulf of Mexico and Caribbean (GMX_CLC, Puerto Rico and U.S. Virgin Islands)
This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the calculated (CLC) output of the dbSEABED mining software. It contains results from calculating variables using empirical functions working on the results of extraction or parsing. The CLC data is the most derivative and certainly the least accurate; however, many clients appreciate that it extends the ... |
Info |
usSEABED PaRSed data for the entire U.S. Atlantic Coast (ATL_PRS)
This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the parsed (PRS) output of the dbSEABED mining software. It contains the results of parsing descriptions in the data resources. The PRS data is less precise because it comes from word-based descriptions, but will include information on outsized elements, consolidation that are not usually in EXT data. |
Info |
usSEABED facies data for the entire U.S. Atlantic Coast (ATL_FAC)
The facies data layer (_FAC.txt) is a point coverage of known sediment samplings, inspections, and probings from the usSEABED data collection and integrated using the software system dbSEABED. The facies data layer (_FAC.txt)represents concatenated information about components (minerals and rock type), genesis (igneous, metamorphic, carbonate, terrigenous), and other appropriate groupings of information about the seafloor. The facies data are parsed from written descriptions from cores, grabs, photographs, ... |
Info |
usSEABED EXTracted data for the entire U.S. Atlantic Coast (ATL_EXT)
This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the extracted (EXT) output of the dbSEABED mining software. It contains data items which were simply extracted from the data resources through data mining. The EXT data is usually based on instrumental analyses (probe or laboratory) but may apply to just a subsample of the sediment (eg. no large shells). |
Info |
usSEABED component and features data for the entire U.S. Atlantic Coast (ATL_CMP)
This component data layer (_CMP.txt) file gives information about selected components (minerals, rock type, microfossils, benthic biota) and seafloor features (bioturbation, structure, ripples) at a given site. Values in the attribute fields represent the membership to that attribute's fuzzy set. For components such as minerals, rocks, micro-biota and plants, and/or epifauna and infauna, corals and other geologic and biologic information, the value depends on sentence structure and other components in ... |
Info |
usSEABED CaLCulated data for the entire U.S. Atlantic Coast (ATL_CLC)
This data layer is a point coverage of known sediment samplings, inspections and probings from the usSEABED data collection and integrated using the software system dbSEABED. This data layer represents the calculated (CLC) output of the dbSEABED mining software. It contains results from calculating variables using empirical functions working on the results of extraction or parsing. The CLC data is the most derivative and certainly the least accurate; however, many clients appreciate that it extends the ... |
Info |
PAC_PRS - Parsed seabed data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_prs.txt)
This data layer (PAC_PRS.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific continental margin integrated using the dbSEABED software system. This data layer represents the parsed (PRS) output of the dbSEABED mining software. It contains the numeric results parsed from text-based descriptions held in the data resource files (DRF). Because it relies on descriptions, the PRS data are less precise than the extracted data ... |
Info |
PAC_FAC: Seabed facies data (combined components) for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_fac.txt)
The facies data layer (PAC_FAC.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific margin, integrated using the software system dbSEABED. The facies data layer (PAC_FAC.txt) represents concatenated information about components (minerals and rock type), genesis (igneous, metamorphic, carbonate, terrigenous), and other appropriate groupings of information about the sea floor. These data are parsed from written ... |
Info |
Seabed component and feature data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_cmp.txt)
This data layer (PAC_CMP.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific continental margin integrated using the software system dbSEABED. This data file gives numeric data about selected components (for example, minerals, rock type, microfossils, and benthic biota) and sea floor features (for example, bioturbation, structure, and ripples) at a given site. Values in the attribute fields represent the membership to ... |
Info |
PAC_CLC: Calculated seabed data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_clc.txt)
This data layer (PAC_CLC.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S Pacific continental margin integrated using the software system dbSEABED. This data layer represents the calculated (CLC) output of the dbSEABED mining software. Data in this file extend variables determined through the data extraction (EXT) and data parsing (PRS) processes of dbSEABED, calculated using empirical relations or known functions. The CLC ... |
Info |
PAC_EXT - Extracted seabed data for the continental margin of the U.S. Pacific Coast (California, Oregon, Washington) from usSEABED (pac_ext.txt)
This data layer (PAC_EXT.txt) is one of five point coverages of known sediment samples, inspections, and probes from the usSEABED data collection for the U.S. Pacific continental margin integrated using the software system dbSEABED. This data layer represents the extracted (EXT) output of the dbSEABED mining software and contains data items which were extracted from the data resources files and generally represent lab-based analytical data. The EXT data are usually considered the most rigorous data ... |
Info |
Measurements of zinc, oxygen, and pH, from sphalerite and ZnS oxidation in seawater
This data release presents the concentration of zinc, oxygen, pH, temperature, and the time point at which measurements were taken for experimental oxidation work regarding zinc and copper sulfide minerals. These data accompany the following publication: Gartman, A., Whisman, S.P., and Hein, J.R., 2020, Interactive oxidation of sphalerite and covellite in seawater: implications for seafloor massive sulfide deposits and mine waste: ACS Earth and Space Chemistry, https://doi.org/10.1021/acsearthspacechem ... |
Info |
Mineralogy, rare earth elements, and strontium isotopic composition of phosphorites and phosphatized rocks from the Rio Grande Rise, south Atlantic Ocean
Phosphorites and phosphatized rocks from the summit of the Rio Grande Rise (RGR) in the south Atlantic Ocean were collected via dredge during the oceanographic research cruise RGR1 to the western RGR. The location (latitude, longitude, depth), mineralogy, concentrations of phosphorus and rare earth elements, and 87Sr/86Sr ratios of phosphorites and phosphatized FeMn crusts, ironstones, and carbonates from 10 dredge sites are presented here. These data were used to determine the presence of carbonate ... |
Info |
Marine mineral geochemical data - Part One: Pacific Ocean USGS-affiliated historical data
This data release compiles element composition data for more than 600 deep-ocean mineral samples from more than 25 research cruises in the Pacific Ocean since 1979 that involved USGS researchers. Deep-ocean mineral sample types encompassed in this data release include ferromanganese crusts, manganese nodules, phosphorites, and hydrothermal minerals. This data release is comprised of both unpublished as well as previously published data and reports and includes analytical methods and instrument detection ... |
Info |
Major and trace element geochemistry of ferromanganese crusts from seamounts within the Tuvalu Exclusive Economic Zone
Ferromanganese crusts were collected via dredge from seamounts within the Tuvalu Exclusive Economic Zone in the Pacific Ocean during cruise RR1310 funded by the National Science Foundation aboard the R/V Roger Revelle in 2013. USGS scientists requested these ferromanganese crust samples from the Oregon State University Marine and Geology Repository where they had been archived. Ferromanganese crust samples were sent to USGS for subsampling and major and trace element geochemical analyses. Major and trace ... |
Info |
X-ray diffraction data for ferromanganese crusts from seamounts within the Tuvalu Exclusive Economic Zone
Ferromanganese crusts were collected via dredge from seamounts within the Tuvalu Exclusive Economic Zone in the Pacific Ocean during cruise RR1310 funded by the National Science Foundation aboard the R/V Roger Revelle in 2013. USGS scientists requested these ferromanganese crust samples from the Oregon State University Marine and Geology Repository where they had been archived. Ferromanganese crust samples were sent to USGS for subsampling and x-ray diffraction analyses. Powder x-ray diffraction data for ... |
Info |
X-ray diffraction data for heat treated samples of hydrothermal minerals from seamounts within the Tuvalu Exclusive Economic Zone
A sample of hydrothermally mineralized foraminifera ooze (D28A) was collected via dredge from a seamount within the Tuvalu Exclusive Economic Zone in the Pacific Ocean during cruise RR1310 funded by the National Science Foundation aboard the R/V Roger Revelle in 2013. USGS scientists requested these ferromanganese crust samples from the Oregon State University Marine and Geology Repository where they had been archived. Ferromanganese crust samples were sent to USGS for subsampling and x-ray diffraction ... |
Info |
Sorbed-water (H2O-) corrected chemistry for ferromanganese crust samples from the western equatorial Pacific Ocean
Ferromanganese crust samples were collected via dredge during four oceanographic research cruises to the western equatorial Pacific Ocean. The location (latitude, longitude, depth) and concentrations of 27 major and trace elements in the most recent growth layers of ferromanganese crusts from 57 dredge sites are presented here, as well as select seawater chemistry at each location. These data were used in statistical analyses to determine how oceanographic conditions affect the chemical composition of ... |
Info |