Time-series measurements of waves, currents, water levels, sea surface temperatures, ocean salinity, and water, air, and ground temperatures were collected in July through September 2011 in and around Arey Lagoon, near Barter Island, Alaska. Directional wave spectra, currents, water levels, salinity, and bottom and surface water temperatures were measured with a bottom-mounted 1MHz Nortek AWAC, HOBO temperature loggers, and a Solinst Levelogger in ~5m water depth offshore of Arey Island. Within Arey Lagoon, ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetry, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities off southern New England, shows the character and terrain of the seabed, and provides information on sediment transport and benthic habitat. During April-May 2009 NOAA completed hydrographic survey ...

The USGS, in cooperation with NOAA, is producing detailed maps of the seafloor off southern New England. The current phase of this cooperative research program is directed toward analyzing how bathymetric relief relates to the distribution of sedimentary environments and benthic communities. As part of this program, digital terrain models (DTMs) from bathymetry collected as part of NOAA's hydrographic charting activities are converted into ESRI raster grids and imagery, verified with bottom sampling and ...

The U.S. Geological Survey (USGS) Oceanographic Time-Series Measurements Database contains oceanographic observations made as part of studies designed to increase understanding of sediment transport processes and associated ocean dynamics. This report describes the instrumentation and platforms used to make the measurements; the methods used to process and apply quality-control criteria and archive the data; and the data storage format. The report also includes instructions on how to access the data from ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Connecticut Department of Energy and Environmental Protection (CT DEEP), has produced detailed geologic maps of the coastal sea floor. Bathymetry, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities in Long Island Sound, shows the terrain of the seabed, and provides information on sediment transport and benthic ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetric data, originally collected by NOAA for charting purposes, provide a fundamental framework for research and management activities along this part of Block Island Sound, show the composition and terrain of the seabed, and provide information on sediment transport and benthic habitat. During June 2013, bottom photographs and ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetric and sidescan-sonar data, originally collected by NOAA for charting purposes, provide a framework for research and management activities along western Block Island Sound, show the composition and terrain of the seabed, and provide information on sediment transport and benthic habitat. During June 2013, bottom photographs ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetric data, originally collected by NOAA for charting purposes, provide a framework for research and management activities along southern Narragansett Bay, show the composition and terrain of the seabed, and provide information on sediment transport and benthic habitat. During September 2014, bottom photographs and surficial ...

This data set includes the sedimentary environments for the sea floor offshore of northern and eastern Cape Cod, Massachusetts. This interpretation is based on data collected with a multibeam sea floor mapping system during USGS survey 98015, conducted November 9 - 25, 1998 and on data collected with a bottom sampling and photographic system during USGS survey 04011, conducted during May and June, 2004.

This GIS overlay is a component of the U.S. Geological Survey, Woods Hole Field Center's, Gulf of Mexico ArcView GIS database. The Gulf of Mexico GIS database is intended to organize and display USGS held data and provide on-line (WWW) access to the data and/or metadata. Additional GIS overlays downloaded from the WWW, such as the one described here, are also included in the Gulf of Mexico ArcView GIS database. Attempts to properly attribute such GIS overlays with the WWW address and data compilers has been ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Massachusetts Office of Coastal Zone Management (MA CZM), is producing detailed geologic maps of the coastal sea floor. Imagery, originally collected by NOAA for charting purposes, provide a fundamental framework for research and management activities along this part of the Massachusetts coastline, show the composition and terrain of the seabed, and provide information on sediment ...

The U.S. Geological Survey (USGS) is working cooperatively with the National Oceanic and Atmospheric Administration (NOAA) to interpret the surficial geology in estuaries along the coast of the northeastern United States. The purpose of our present study is to define the sea floor morphology and sedimentary environments in an area of Rhode Island Sound using sidescan sonar imagery, multibeam bathymetry, and seismic records. The mosaic, bathymetry, and their interpretations serve many purposes, including: (1 ...

Restoration in the tidally restricted Herring River Estuary in Wellfleet, MA benefits from understanding pre-restoration sediment transport conditions. Submerged sensors were deployed at four sites landward and seaward of the Herring River restriction to measure water velocity, water quality, water level, waves, and seabed elevation. These data will be used to evaluate sediment dynamics and geomorphic change and inform marsh modeling efforts over tidal and seasonal timescales.

In October 2012, Hurricane Sandy made landfall in the Northeastern U.S., affecting ecosystems and communities of 12 states. In response, the National Fish and Wildlife Federation (NFWF) and the U.S. Department of Interior (DOI) implemented the Hurricane Sandy Coastal Resiliency Program, which funded various projects designed to reduce future impacts of coastal hazards. These projects included marsh, beach, and dune restoration, aquatic connectivity, and living shoreline installation, among others. To ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Time-series data of water surface elevation, waves, currents, temperature, and salinity collected between 17 May 2017 and 17 Jan 2018 off the southwest coast of Puerto Rico in support of a study on circulation and sediment transport dynamics over coral reefs. The data are available in NetCDF format, grouped together in zip files by instrument site location. A README.txt file details the files contained within each zip, including the file names, type of data collected, instrument that collected the data, ...

Time-series measurements of waves, currents, water levels, sea surface temperatures, ocean salinity, and water, air, and ground temperatures were collected in July through September 2011 in and around Arey Lagoon, near Barter Island, Alaska. Directional wave spectra, currents, water levels, salinity, and bottom and surface water temperatures were measured with a bottom-mounted 1MHz Nortek AWAC, HOBO temperature loggers, and a Solinst Levelogger in ~5m water depth offshore of Arey Island. Within Arey Lagoon, ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetry, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities off southern New England, shows the composition and terrain of the seabed, and provides information on sediment transport and benthic habitat. During July-August 2008 NOAA completed hydrographic ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The sensitivity to sediment parameterization and initial bed configuration on sediment transport processes and morphological evolution are assessed through process-based numerical modeling. Six sensitivity cases using a previously validated model for Dauphin Island, Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on bed level morphology, barrier island evolution, and sediment fluxes. Delft3D model output of suspended and bedload sediment fluxes, and final bed levels data are ...

The sensitivity to sediment parameterization and initial bed configuration on sediment transport processes and morphological evolution are assessed through process-based numerical modeling. Six sensitivity cases using a previously validated model for Dauphin Island, Alabama were modeled using Delft3D (developed by Deltares) to understand impacts on bed level morphology, barrier island evolution, and sediment fluxes. Delft3D model output of suspended and bedload sediment fluxes, and final bed levels data are ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) covering the nearshore, seaward side of Rockaway Peninsula, New York (NY), from May 6-16, 2023. This dataset, Rockaway_2023_MBES_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid and the dataset Rockaway_2023_MBES ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The model output of bathymetry and topography values resulting from a deterministic simulation at Dauphin Island, Alabama, as described in USGS Open-File Report 2019–1139 (https://doi.org/10.3133/ofr20191139), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry refer to Mickey and others (2020).

The model input for the bathymetry and topography values resulting from a deterministic simulation at Dauphin Island, Alabama, as described in U.S. Geological Survey (USGS) Open-File Report 2019-1139 (https://doi.org/10.3133/ofr20191139), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) covering the nearshore extent of Seven Mile Island, New Jersey (NJ), from May 18-27, 2023. The download file, 7Mile_2023_MBES_xyz.zip, includes processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid. The download file, 7Mile_2023_MBES ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) covering the nearshore extent of Seven Mile Island, New Jersey, from May 19-23, 2021. The download file, 7Mile_2021_MBES_xyz.zip, includes processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid. The download file, 7Mile_2021_MBES ...

Relict karstic features or sinkholes, often referred to as blue holes, are common features along continental shelves that are underlain by carbonate rich sediments and/or rocks. Several of these features occur along the west-Florida shelf within the Gulf of Mexico, including the two mentioned in Vargas and others (2022): Amberjack Hole and Green Banana Sink (hereafter referred to as Green Banana). Scientists from the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center (USGS-SPCMSC) ...

To determine continued change to the shoreface morphology and evolution at Seven Mile Island, New Jersey, scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS SPCMSC) in St. Petersburg, Florida, conducted a single-beam bathymetric survey of Seven Mile Island, New Jersey, from April 29 - May 2, 2022. During this study, single-beam bathymetry data were collected using a personal watercraft (PWC) and a floating-towed-seismic sled. Both the PWC and the seismic sled ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) nearshore Boca Chica Key, the Florida Keys, from November 8-13, 2022. This dataset, BocaChica_2022_MBES_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid, and the dataset BocaChica_2022_MBES_Backscatter.zip ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) nearshore Tyndall Air Force Base, Panama City, Florida, from June 20-30, 2022. This dataset, Tyndall_2022_MBES_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid, and the dataset Tyndall_2022_MBES_Backscatter.zip ...

In February 2017, the United States Geological Survey Saint Petersburg Coastal and Marine Science Center (USGS SPCMSC) conducted multibeam and single-beam bathymetric surveys of the nearshore waters off Madeira Beach, Florida. These data were collected as part of a regional study designed to better understand coastal processes on barrier islands and sandy beaches. Results from this study will be incorporated with observations from other regional studies in order to validate operational water level and ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) nearshore Madeira Beach, Florida February 13-17, 2017. This dataset, Madeira_Beach_2017_MBES_1m_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid.

An Ellipsoidally Referenced Survey (ERS) using a Norbit Winghead multibeam echosounder, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) nearshore Coconut Island, on the island of Oahu, May 7, 2023. This dataset, CoconutIsland_2023_MBES_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 0.25 meter (m) bathymetric grid and the dataset CoconutIsland_2023_MBES_Backscatter.zip includes the acoustic backscatter intensity ...

An Ellipsoidally Referenced Survey (ERS) using a Norbit Winghead multibeam echosounder, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) nearshore Fort Hase Marine Corps Base Hawaii (MCBH), on the island of Oahu, May 4-12, 2023. This dataset, FtHase_2023_MBES_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid and the dataset FtHase_2023_MBES_Backscatter.zip includes the acoustic backscatter ...

Scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS – SPCSMC), conducted a single-beam bathymetry survey within Point Aux Chenes Bay, Mississippi (MS), in June 2022 under the USGS Field Activity Number (FAN) 2022-320-FA. The data was collected from two personal watercrafts (PWC): research vessel (R/V) Shark (subFAN 22CCT09, WVR1) and R/V Chum (subFAN 22CCT10, WVR2). A re-survey of just the north and south subtidal reefs occurred in November 2022 (subFANs ...

As part of the restoration monitoring component of the Deepwater Horizon early restoration project, scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS SPCMSC) conducted single-beam and multibeam bathymetry surveys around Breton Island, Louisiana (LA), from August 3-5, 2022, for Field Activity Number (FAN) 2022-328-FA. The purpose of data collection was to develop a baseline digital elevation model of the seafloor around Breton Island for comparison with both ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) covering the nearshore, Gulf side of Breton Island, Louisiana (LA), from August 2-5, 2022. This dataset, Breton_2022_MBES_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid.

The U.S. Geological Survey (USGS) conducts baseline and storm-response photography missions to document and understand the changes in the vulnerability of the Nation's coasts to extreme storms. On July 24, 2010, the USGS conducted an oblique aerial photographic survey at the Chandeleur Islands, Louisiana, and Dauphin Island, Alabama, aboard a Beechcraft BE90 King Air aircraft at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was conducted to collect data for assessing ...

The U.S. Geological Survey (USGS) conducts baseline and storm-response photography missions to document and understand the changes in the vulnerability of the Nation's coasts to extreme storms. On September 3, 2010, the USGS conducted an oblique aerial photographic survey from Breton Island to the Chandeleur Islands, Louisiana, aboard a Cessna 210 aircraft at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was conducted to collect data for assessing incremental changes in the ...

The U.S. Geological Survey (USGS) conducts baseline and storm-response photography missions to document and understand the changes in the vulnerability of the Nation's coasts to extreme storms. On May 19-20, 2010, the USGS conducted an oblique aerial photographic survey from Horseshoe Beach, Florida, to East Cape, Florida, aboard a Piper Navajo Chieftain aircraft at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was conducted to collect data for assessing incremental changes ...

The U.S. Geological Survey (USGS) conducts baseline and storm-response photography missions to document and understand the changes in the vulnerability of the Nation's coasts to extreme storms. On January 22, 2011, the USGS conducted an oblique aerial photographic survey at Breton Island and the Chandeleur Islands, LA, aboard a Cessna 210 aircraft at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was conducted to collect data for assessing incremental changes in the beach and ...

The U.S. Geological Survey (USGS) conducts baseline and storm-response photography missions to document and understand the changes in the vulnerability of the Nation's coasts to extreme storms. On August 24, 2011, the USGS conducted an oblique aerial photographic survey from Ponte Vedra, Florida, to the South Carolina/North Carolina border, aboard a Piper Navajo Chieftain aircraft at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was conducted to collect data for assessing ...

In order to characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi and Alabama (MSAL) barrier islands. One goal of this work was to create a time-series of bathymetric change maps around the islands between 1916 and 2016.

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Datasets include 1916 through 1920 soundings collected by the United States Coast and ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Data sets include 1916 through 1920 soundings collected by the United States Coast and ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Datasets include 1916 through 1920 soundings collected by the United States Coast and ...

During the summers of 2008 and 2009 the United States Geological Survey (USGS) conducted bathymetric surveys from West Ship Island, Mississippi, to Dauphin Island, Alabama, as part of the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility project. The survey area extended from the shoreline out to approximately two kilometers and included the adjacent passes. These findings were originally published in Dewitt and others (2012). This USGS data release includes updated elevation point ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Datasets include 1916 through 1920 soundings collected by the United States Coast and ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Data sets include 1916 through 1920 soundings collected by the United States Coast and ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Datasets include 1916 through 1920 soundings collected by the United States Coast and ...

A geophysical survey was conducted offshore Cape Canaveral, Florida by Coastal Carolina University offshore of Cape Canaveral, Florida using high-resolution chirp sub-bottom, multibeam bathymetry and side scan sonar (SSS) systems on June 13, 14, 16, and 17 of 2016. This USGS data release includes the resulting processed elevation point data (xyz), an interpolated digital elevation model (DEM), with processed backscatter, side scan sonar, and seismic chirp data.

A geophysical survey was conducted offshore Cape Canaveral, Florida by Coastal Carolina University offshore of Cape Canaveral, Florida using high-resolution chirp sub-bottom, multibeam bathymetry and side scan sonar (SSS) systems on June 13, 14, 16, and 17 of 2016. This USGS data release includes the resulting processed elevation point data (xyz), an interpolated digital elevation model (DEM), with processed backscatter, side scan sonar, and seismic chirp data.

A geophysical survey was conducted offshore Cape Canaveral, Florida by Coastal Carolina University offshore of Cape Canaveral, Florida using high-resolution chirp sub-bottom, multibeam bathymetry and side scan sonar (SSS) systems on June 13, 14, 16, and 17 of 2016. This USGS data release includes the resulting processed elevation point data (xyz), an interpolated digital elevation model (DEM), with processed backscatter, side scan sonar, and seismic chirp data.

A geophysical survey was conducted offshore Cape Canaveral, Florida by Coastal Carolina University offshore of Cape Canaveral, Florida using high-resolution chirp sub-bottom, multibeam bathymetry and side scan sonar (SSS) systems on June 13, 14, 16, and 17 of 2016. This USGS data release includes the resulting processed elevation point data (xyz), an interpolated digital elevation model (DEM), with processed backscatter, side scan sonar, and seismic chirp data.

A geophysical survey was conducted offshore Cape Canaveral, Florida by Coastal Carolina University offshore of Cape Canaveral, Florida using high-resolution chirp sub-bottom, multibeam bathymetry and side scan sonar (SSS) systems on June 13, 14, 16, and 17 of 2016. This USGS data release includes the resulting processed elevation point data (xyz), an interpolated digital elevation model (DEM), with processed backscatter, side scan sonar, and seismic chirp data.

A geophysical survey was conducted offshore Cape Canaveral, Florida by Coastal Carolina University offshore of Cape Canaveral, Florida using high-resolution chirp sub-bottom, multibeam bathymetry and side scan sonar (SSS) systems on June 13, 14, 16, and 17 of 2016. This USGS data release includes the resulting processed elevation point data (xyz), an interpolated digital elevation model (DEM), with processed backscatter, side scan sonar, and seismic chirp data.

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC), covering the nearshore, seaward of Cedar Island, Virginia, from August 14-21, 2019. This dataset, Cedar_ Island_2019_MBES_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid. Additionally, the dataset Cedar_Island ...

Scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS - SPCMSC) in St. Petersburg, Florida, conducted a single-beam bathymetric survey of Cedar Island, Virginia, August 9-15, 2019. During this study, bathymetry data were collected aboard a towed seismic sled outfitted with a single-beam echosounder.

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) offshore of Cedar Key, Florida (FL) during two legs, November 27-30, and December 10-13, 2018. This dataset, Cedar_Key_MBB_2018_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid.

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) offshore of the Chandeleur Islands, Louisiana, August 9-12, 2017. This dataset, Chandeleur_Islands_2017_MBB_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid.

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) offshore of the Chandeleur Islands, Louisiana, August 16-21, 2018. This dataset, Chandeleur_ Islands_2018_MBES_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid.

Scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS - SPCMSC) in St. Petersburg, Florida, conducted a single-beam bathymetric survey of the northern Chandeleur Islands, August 17-21, 2018. During this study, bathymetry data were collected aboard the research vessel (R/V) Jabba Jaw, a 21-foot (ft) twin hulled vessel outfitted with a single-beam echosounder.

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) at Crocker Reef, the Florida Keys October 10-28, and December 5-8, 2017. This dataset, Crocker_2017_MBB_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid.

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) at Crocker Reef, the Florida Keys March 8-15, 2018. This dataset, Crocker_2018_MBB_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid.

Scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center in St. Petersburg, Florida, conducted a bathymetric survey of Fire Island, New York, June 2?17, 2018. The U.S. Geological Survey is involved in a post-Hurricane Sandy effort to map and monitor the morphologic evolution of the wilderness breach and the adjacent shoreface environment. During this study, bathymetry data were collected aboard two personal watercraft (PWC) outfitted with single-beam echosounders, as well ...

A reconnaissance multibeam bathymetry survey was conducted by the U.S Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) in Grand Bay Alabama/Mississippi on May 12, 2016 as an assessment of the shallow water capabilities of the Teledyne Reson SeaBat T50-P multibeam echosounder, and as an attempt to map the eroding marsh edges at locations of interest around the bay. This dataset, Grand_Bay_2016_MBB_Adjusted_xyz.zip, includes the resulting processed elevation point data (x,y,z ...

A reconnaissance multibeam bathymetry survey was conducted by the U.S Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) in Grand Bay Alabama/Mississippi on May 12, 2016 as an assessment of the shallow water capabilities of the Teledyne Reson SeaBat T50-P multibeam echosounder, and as an attempt to map the eroding marsh edges at locations of interest around the bay. This dataset, Grand_Bay_2016_MBB_Tracklines.zip, includes the trackline vector file derived from the ...

A reconnaissance multibeam bathymetry survey was conducted by the U.S Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) in Grand Bay Alabama/Mississippi (AL/MS) on May 12, 2016 as an assessment of the shallow water capabilities of the Teledyne Reson SeaBat T50-P multibeam echosounder, and as an attempt to map the eroding marsh edges at locations of interest around the bay. This dataset, Grand_Bay_2016_MBB_Unadjusted_xyz.zip, includes the resulting [unadjusted] processed ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) in Grand Bay Alabama/Mississippi (AL/MS) October 22-23, 2018. This dataset, Grand_Bay_2018_MBB_xyz.zip, includes the processed point data (x,y,z), as derived from a 1-meter (m) bathymetric grid.

An Ellipsoidally Referenced Survey (ERS) using a Teledyne Reson SeaBat T50-P multibeam echosounder was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) in Grand Bay Alabama/Mississippi (AL/MS) May 7-10, 2019. This dataset, Grand_Bay_2019_MBES_xyz.zip, includes the processed point data (x,y,z), as derived from a 1-meter (m) bathymetric grid from two separate sensor configurations, which were acquired independently. One configuration utilized a tilted ...

Scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS SPCMSC) in St. Petersburg, Florida, conducted a bathymetric survey of Point Aux Chenes Bay and a small portion of Grand Bay, Mississippi/Alabama, from March 3-6, 2021. Efforts were supported by the Estuarine and MaRsh Geology project (EMRG), and the data described will provide baseline bathymetric information for future research investigating wetland/marsh evolution, sediment transport, and recent and long-term ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) at Looe Key, the Florida Keys, during three separate survey legs: December 14-16, 2017, February 2-9, 2018 and March 9-11, 2018. This dataset, Looe_Key_2017_2018_MBB_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. This USGS data release includes three digital elevation models (DEMs) for 1916 to 1920, 2008 ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) covering the nearshore, seaward side of Rockaway Peninsula, New York (NY), from October 4-6, 2019. This dataset, Rockaway_2019_MBES_Leg1_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid from the first leg of the ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) covering the nearshore, seaward side of Rockaway Peninsula, New York (NY), from October 24-29, 2019. This dataset, Rockaway_2019_MBES_Leg2_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid from the second leg of ...

Scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS - SPCMSC) in St. Petersburg, Florida, conducted a single-beam bathymetric survey of Rockaway Peninsula, New York September 27 - October 6, 2019. During this study, bathymetry data were collected aboard two personal watercraft (PWC) outfitted with single-beam echosounders, as well as a towed seismic sled with similar instrumentation.

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) covering the nearshore, seaward side of Rockaway Peninsula, New York (NY), June 18-25, 2021. This dataset, Rockaway_2021_MBES_xyz.zip, includes the processed elevation point data (x,y,z), as derived from a 1-meter (m) bathymetric grid and the dataset Rockaway_2021_MBES ...

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) offshore of Santa Rosa Island, Florida (FL), June 15-29, 2019. This dataset, Santa_Rosa_Island_2019_MBES_UTM16N_xyz.zip, includes the processed elevation point data (XYZ) as derived from a 1-meter (m) bathymetric grid.

An Ellipsoidally Referenced Survey (ERS) using two Teledyne Reson SeaBat T50-P multibeam echosounders, in dual-head configuration, was conducted by the U.S Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) offshore of Seven Mile Island, New Jersey, September 6-8, 2018 and September 21-23, 2018. This dataset, presented as Seven_Mile_Island_2018_MBES_WGS84_UTM18N_xyz.zip and Seven_Mile_Island_2018_MBES_NAD83_NAVD88_GEOID12B_xyz.zip, includes the processed elevation point data ...

Time-series measurements of waves, currents, water levels, sea surface temperatures, ocean salinity, and water, air, and ground temperatures were collected in July through September 2011 in and around Arey Lagoon, near Barter Island, Alaska. Directional wave spectra, currents, water levels, salinity, and bottom and surface water temperatures were measured with a bottom-mounted 1MHz Nortek AWAC, HOBO temperature loggers, and a Solinst Levelogger in ~5m water depth offshore of Arey Island. Within Arey Lagoon, ...

Time-series measurements of waves, currents, water levels, sea surface temperatures, ocean salinity, and water, air, and ground temperatures were collected in July through September 2011 in and around Arey Lagoon, near Barter Island, Alaska. Directional wave spectra, currents, water levels, salinity, and bottom and surface water temperatures were measured with a bottom-mounted 1MHz Nortek AWAC, HOBO temperature loggers, and a Solinst Levelogger in ~5m water depth offshore of Arey Island. Within Arey Lagoon, ...

Time-series measurements of waves, currents, water levels, sea surface temperatures, ocean salinity, and water, air, and ground temperatures were collected in July through September 2011 in and around Arey Lagoon, near Barter Island, Alaska. Directional wave spectra, currents, water levels, salinity, and bottom and surface water temperatures were measured with a bottom-mounted 1MHz Nortek AWAC, HOBO temperature loggers, and a Solinst Levelogger in ~5m water depth offshore of Arey Island. Within Arey Lagoon, ...

This data report presents oceanographic observations made in Massachusetts Bay in August 1998 as part of the Massachusetts Bay Internal Wave Experiment (MBIWE98). MBIWE98 was carried out to characterize large-amplitude internal waves in Massachusetts Bay and to investigate the possible resuspension and transport of bottom sediments caused by these waves. This data report presents a description of the field program, an overview of the data through summary plots and statistics, and the time-series data in ...

RBRduo pressure and temperature sensors mounted on aluminum frames, were moored in shallow (4-9 m) water depths along the West side of Whidbey Island, Washington, to measure wave heights and periods. Continuous pressure fluctuations were transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.

RBRduo pressure and temperature sensors (early 2015 generation), mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Bellingham Bay, Washington, to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.

RBRduo pressure and temperature sensors (early 2015 generation), mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Skagit Bay to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.

This web mapping application is a compilation of geoscientific data collected and published by the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS SPCMSC). This application does not serve as a complete archive of all the geoscientific data collected by the center, but highlights frequently published data types. Data within this web application include: seismic data extents, seismic survey tracklines (boomer, chirp, and minisparker), bathymetric footprints, bathymetric ...

Long Island Sound is one of the largest estuaries along the Atlantic coast of the United States. It is a glacially produced, semi-enclosed, northeast-southwest-trending embayment, which is 150 km long and 30 km across at its widest point. Its mean water depth is approximately 24 m. The eastern end of the Sound opens to the Atlantic Ocean through several large passages between islands, whereas the western end is connected to New York Harbor through a narrow tidal strait. Long Island Sound abuts the New York ...

Sediment samples were collected on and adjacent to the Whale's Tail South marsh. Short push-cores of bed sediment were collected in South San Francisco Bay adjacent to Whale's Tail South marsh on five days from June through August 2021 and 3 days from November 2021 to January 2022. Additional samples were taken from sediment deposited on ceramic tiles attached to the marsh surface and from rip-up clasts deposited on the marsh edge. Samples were analyzed for sediment properties including bulk density, ...

Bed sediment samples were collected from the intertidal, and subtidal shallows of San Pablo Bay National Wildlife Refuge and Corte Madera Bay near stations where instrumented platforms that were collecting hydrographic time-series were deployed. Sediment sediments were collected with push cores, either manually or by subsampling a Gomex box corer. Cores, which ranged in length from 5 to 18 centimeters (cm), were sectioned by depth. The top two sections from each core were 0.5 cm thick, the following ...

The United States Geological Survey (USGS) is working cooperatively with the National Oceanic and Atmospheric Association (NOAA) to interpret the surficial geology in estuaries along the coast of the northeastern United States. The purpose of our present study is to interpret the distributions of surficial sediments and sedimentary environments in an area of Narragansett Bay using sidescan sonar imagery, high-resolution bathymetry, and sediment data. The mosaic presented herein covers an area of the sea ...