The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

This portion of the USGS data release describes the Delft3D-FLOW model application for propagating simulated tsunamis from 15 hypothetical earthquake sources of the Cascadia Subduction Zone through a series of nested grids to modeling tsunami sediment transport in the Salmon River estuary, OR. Input files necessary to run the Delft3D-FLOW model are provided. The model application was constructed using Delft3D-FLOW. Zip files containing model setup data are provided for each of the nested hydrodynamic grids ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

Bedload sediment transport was calculated on the Elwha River, Washington to measure the amount of sediment transported along the riverbed during the 2016 water year. Bedload was measured using the Elwha bedload impact plate system (Hilldale and others, 2015). Physical bedload sampling by the U.S. Bureau of Reclamation for system calibration took place during November, 2012; March, May, and June 2013; and April 2014 at the Diversion Weir gauge (Magirl and others, 2015). Early in water year 2016 (year 5) the ...

Sediment samples were collected on and adjacent to the Whale's Tail South marsh. Short push-cores of bed sediment were collected in South San Francisco Bay adjacent to Whale's Tail South marsh on five days from June through August 2021 and 3 days from November 2021 to January 2022. Additional samples were taken from sediment deposited on ceramic tiles attached to the marsh surface and from rip-up clasts deposited on the marsh edge. Samples were analyzed for sediment properties including bulk density, ...

Sediment samples were collected on and adjacent to the Whale's Tail South marsh. Short push-cores of bed sediment were collected in South San Francisco Bay adjacent to Whale's Tail South marsh on five days from June through August 2021 and 3 days from November 2021 to January 2022. Additional samples were taken from sediment deposited on ceramic tiles attached to the marsh surface and from rip-up clasts deposited on the marsh edge. Samples were analyzed for sediment properties including bulk density, ...

The Herring River in Wellfleet, MA is a tidally-restricted estuary system. Management options including potential restoration of unrestricted tidal flows require an understanding of pre-restoration sediment conditions. Altering future tidal flows may cause changes in net sediment flux and direction, which could affect marsh restoration and aquaculture in Wellfleet Harbor. This research aims to measure sediment fluxes seaward of the Herring River restriction and sediment concentrations landward of the ...

This part of the data release includes Multi-Sensor Core Logger (MSCL) P-wave velocity and gamma-ray density whole-core logs of sediment cores collected in 2014 from the northern flank of Monterey Canyon, offshore California. It is one of five files in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, north of Monterey Canyon, offshore central California. Vibracores and push cores were collected with the Monterey Bay Aquarium ...

This part of the data release includes Multi-Sensor Core Logger (MSCL) P-wave velocity, gamma-ray density, and magnetic susceptibility whole-core logs of sediment cores collected in 2009 offshore of Palos Verdes, California. It is one of seven files included in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, offshore Los Angeles and the Palos Verdes Peninsula, adjacent to the Palos Verdes Fault. Gravity cores were collected by the ...

The sensitivity to sediment parameterization and initial bed configuration on sediment transport processes and morphological evolution are assessed through process-based numerical modeling. Six sensitivity cases using a previously validated model for Dauphin Island, Alabama were modeled using Delft3D (developed by Deltares) to understand impacts on bed level morphology, barrier island evolution, and sediment fluxes. Delft3D model output of suspended and bedload sediment fluxes, and final bed levels data are ...

Bed sediment samples were collected in San Pablo Bay and Grizzly Bays on eight days from June through November 2019, to analyze for sediment properties including bulk density, particle size distribution, and percent organic carbon. Sediment samples were collected from a small vessel near pre-established USGS instrument moorings using a Gomex box corer that was subsampled with three push cores (37 mm in diameter) per Gomex core. Six subsamples were collected from the top 5 centimeters (cm) of each push ...

In 2012, Hurricane Sandy struck the Northeastern US causing devastation among coastal ecosystems. Post-hurricane marsh restoration efforts have included sediment deposition, planting of vegetation, and restoring tidal hydrology. The work presented here is part of a larger project funded by the National Fish and Wildlife Foundation (NFWF) to monitor the post-restoration ecological resilience of coastal ecosystems in the wake of Hurricane Sandy. The U.S. Geological Survey Woods Hole Coastal and Marine Science ...

Daily values of discharge and sediment loads were measured and estimated at U.S. Geological Survey gaging station 12046260, on the Elwha River at the diversion near Port Angeles, Washington. Daily data are reported from September 15, 2011 to September 30, 2016. Specific data include (1) date; (2) discharge; (3) suspended-sediment concentration and one standard-deviation bounds; (4) percentage of fine-grained particles (silts and clays) in suspension; (5) loads of total suspended-sediment, fine-grained ...

Bed sediment samples were collected in Lindsey Slough in April 2017, and Middle River and the Mokelumne River in March 2018, to analyze for sediment properties, including bulk density, particle size distribution, and percent organic carbon. Sediment samples were collected within the vegetation with push corers deployed from a small vessel, and in the unvegetated channel with a Gomex box corer, which was subsampled with three push cores per Gomex core. Data are provided in a comma-delimited values ...

Suspended-sediment transport is a critical element governing the geomorphology of tidal marshes and estuaries. Marsh elevation, relative to sea level, is maintained by both organic material and the deposition of inorganic sediment. Additionally, horizontal marsh extent is altered by lateral erosion and accretion. In wetlands within and near Grand Bay National Estuarine Research Reserve, parts of the salt marsh are eroding relatively rapidly. To understand the connection between sediment fluxes and these ...

The sensitivity to sediment parameterization and initial bed configuration on sediment transport processes and morphological evolution are assessed through process-based numerical modeling. Six sensitivity cases using a previously validated model for Dauphin Island, Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on bed level morphology, barrier island evolution, and sediment fluxes. Delft3D model output of suspended and bedload sediment fluxes, and final bed levels data are ...

Grain size distribution and bulk density are reported for sediment push cores from two flooded agricultural tracts, Little Holland Tract and Liberty Island, in the Sacramento-San Joaquin Delta, California. Push core samples were collected from 14 sites by the U.S Geological Survey in August, 2014. Each core was analyzed at multiple depths to investigate variations in particle sizes with depth below the sediment surface. The same sites were sampled again in 2016 (https://www.sciencebase.gov/catalog/item ...

Water samples were collected in South San Francisco Bay adjacent to Whale’s Tail South marsh on three days from June through December 2021 to analyze for suspended-sediment concentration and the percent of sand and fines in suspended sediment.

Bed sediment samples were collected in San Pablo Bay and Grizzly Bays on eight days from January through September 2020, to analyze for sediment properties including bulk density, particle size distribution, and percent organic carbon. Sediment samples were collected from a small vessel near pre-established USGS instrument moorings using a Gomex box corer that was subsampled with three push cores (37 mm in diameter) per Gomex core. Six subsamples were collected from the top 5 centimeters (cm) of each push ...

Grain size distribution and bulk density are reported for sediment push cores from two flooded agricultural tracts, Little Holland Tract and Liberty Island, in the Sacramento-San Joaquin Delta, California. Push core samples were collected from 17 sites by the U.S. Geological Survey in June 2016. Each core was analyzed at multiple depths to investigate variations in particle sizes with depth below the sediment surface. The same sites were sampled previously in 2014 (https://www.sciencebase.gov/catalog/item ...

This data release provides 15-minute data of suspended-sediment concentration and fine (less than 0.0625 mm) suspended-sediment concentration during the removal of 2 large dams on the Elwha River from September 2011 to September 2016. Data are derived from regression relations with turbidity at the USGS gaging station Elwha River at the Diversion (no.12046260).

Bed sediment samples were collected in south San Francisco Bay on two days in July 2020 to analyze for sediment grain size distributions. Sediment samples were collected from the R/V Snavely near pre-established U.S. Geological Survey instrument moorings using a Gomex or Ponar box corer that was subsampled by scraping the top 0.5 cm of the core. Data are provided in a comma-delimited values spreadsheet.

Time-series oceanographic data for the Northeast Atlantic outer continental shelf, Gulf of Maine and Georges Bank collected by the U.S. Geological Survey (USGS) or used in conjunction with USGS projects. These data are stored as NetCDF files using conventions developed by National Oceanic and Atmospheric Administration (NOAA) Pacific Marine Environmental Laboratory (PMEL) lab to be compatible with their EPIC system. Variables present in the files include: ocean current, temperature, pressure, conductivity, ...

This dataset includes computed tomography (CT) scan imagery of sediment cores collected in southern Cascadia (offshore northern California) aboard the M/V Bold Horizon in September-October 2019.

This dataset presents core information such as core IDs, section numbers, lengths, depth intervals, and locations from sediment cores collected in southern Cascadia (offshore northern California) aboard the M/V Bold Horizon in September-October 2019. An inventory of core section CT, MSCL, and photograph scan files available in this data release are listed here.

This dataset includes photographs (linescan images) of sediment cores collected in southern Cascadia (offshore northern California) aboard the MV Bold Horizon in September-October 2019.

This dataset presents radiocarbon data from 87 samples from sediment cores collected in southern Cascadia (offshore northern California) aboard the M/V Bold Horizon in September-October 2019. Sample ages were determined by the National Ocean Sciences Accelerator Mass Spectrometry (NOSAMS) facility and the W.M. Keck Carbon Cycle Accelerator Mass Spectrometry (KCCAMS) facility at the University of California, Irvine (UCI).

Fine-sediment elemental chemistry, short-lived cosmogenic radionuclides (Beryllium-7, Cesium-137, and Lead-210), charcoal counts, and total organic carbon contents were quantified to describe urban and wildfire effects and land-based sediment sources and runoff to Olowalu Reef in February 2022.

Seventy six parent and alkylated polycyclic aromatic compounds, including polycyclic aromatic hydrocarbons (PAHs), were quantified in watershed and reef sediment from Olowalu, Maui, in February 2022 to explore urban and wildfire effects. Sample locations and total organic carbon contents (OC) are available in the accompanying file OlowaluWatershedReef2022_compositions.csv.

This portion of the data release presents sediment grain-size data from cores and surface samples collected from the Salmon River estuary in 2017 and 2018. In total, 60 samples were collected from 18 sites containing sandy sediment from the circa 1700 CE tsunami deposit, two sites with post-1700 CE silt, and eight modern surface sample sites. The grain-size distributions of samples were determined using standard techniques developed by the USGS Pacific Coastal and Marine Science Center sediment lab. The ...

This portion of the data release presents sediment grain-size data from vibracores collected from Searsville Lake, Jasper Ridge Biological Preserve, Stanford, California in October 2018 (USGS Field Activity 2018-682-FA). In total, 36 samples were subsampled from two vibracores: JRBP2018-VC01A and JRBP2018-VC01B. The grain-size distributions of samples were determined using standard techniques developed by the USGS Pacific Coastal and Marine Science Center sediment lab. The grain-size data are provided in a ...

This web mapping application is a compilation of geoscientific data collected and published by the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS SPCMSC). This application does not serve as a complete archive of all the geoscientific data collected by the center, but highlights frequently published data types. Data within this web application include: seismic data extents, seismic survey tracklines (boomer, chirp, and minisparker), bathymetric footprints, bathymetric ...

Grain size distribution and bulk density are reported for sediment samples from two flooded agricultural tracts, Little Holland Tract and Liberty Island, in the Sacramento-San Joaquin Delta, California. Samples were repeatedly collected at 8 sites using a Ponar grab or push core samplers during 19 visits to the study area from 2015 to 2019. The long-term time series data collection stations (sites LWA, HVB, HWC, and LVB) were sampled on almost every field survey, and the remaining sites were sampled 6 or ...

Long Island Sound is one of the largest estuaries along the Atlantic coast of the United States. It is a glacially produced, semi-enclosed, northeast-southwest-trending embayment, which is 150 km long and 30 km across at its widest point. Its mean water depth is approximately 24 m. The eastern end of the Sound opens to the Atlantic Ocean through several large passages between islands, whereas the western end is connected to New York Harbor through a narrow tidal strait. Long Island Sound abuts the New York ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in August 2022 (USGS Field Activity 2022-638-FA). Surface sediment was collected from 67 locations using a small ponar, or 'grab', sampler from the R/V Frontier in water depths between about 1 and 17 m around the delta. An additional 44 samples were collected by hand at low tide. A hand-held global satellite navigation system (GNSS) receiver was used to determine the locations of ...

As part of the hydrodynamic and sediment transport investigations in San Pablo Bay and China Camp Marsh, California, particle size distributions of bed sediments were measured at most instrumented stations and are presented in a comma-delimited values spreadsheet. This portion of the data release presents San Pablo Bay and China Camp Marsh sediment particle size distributions from samples collected during multiple instrument deployments. Users are advised to check the data carefully for sampling time, ...

This portion of the data release presents sediment grain-size data from samples collected from Anahola Valley, Kaua`i, Hawai`i in November, 2015 (USGS Field Activity 2015-671-FA). 63 sand and mud samples were taken from sediment cores that were collected using a Russian corer (a hand-held, side-filling peat auger) from two site locations. Site locations were determined using a hand-held global navigation satellite system, GNSS. The grain-size distributions of samples were determined using standard ...

This dataset contains surface sediment grain size distributions derived from automated image processing of in situ seafloor images obtained with an underwater camera system at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, in 2021. The surface sediment grain size distribution data are provided in comma-separated text (.csv) format for each site and for data used in calibration and validation of the automated image processing technique.

This dataset contains surface sediment grain size distributions derived from manual point counts of in situ seafloor images obtained with an underwater camera system in the lower Columbia River, Washington and Oregon, in 2021. The distributions derived from manual point counts were compared with results from an automated image processing technique to calibrate and validate the automated method used to quantify surface sediment grain size distributions in objective images. The surface sediment grain size ...

This dataset contains surface sediment grain diameter measurements from in situ seafloor images collected in the lower Columbia River, Washington and Oregon, in 2021. Surface sediment grain diameters were derived from manual measurements (or "point counts") in a subset of images used to calibrate and validate an automated image processing algorithm to determine surface sediment grain size distributions. For each calibration and validation image that was selected, the long and short axis of 100 grains were ...

These data map in high detail surficial cross-sections of North Core Banks, a barrier island in Cape Lookout National Seashore, NC, in October 2022. U.S. Geological Survey field efforts are part of an interagency agreement with the National Park Service to monitor the recovery of the island from Hurricanes Florence (2018) and Dorian (2019). Three sites of outwash, overwash, and pond formation were targeted for extensive vegetation ground-truthing, sediment samples, bathymetric mapping with a remote ...

In 2012, Hurricane Sandy struck the Northeastern US causing devastation among coastal ecosystems. Post-hurricane marsh restoration efforts have included sediment deposition, planting of vegetation, and restoring tidal hydrology. The work presented here is part of a larger project funded by the National Fish and Wildlife Foundation (NFWF) to monitor the post-restoration ecological resilience of coastal ecosystems in the wake of Hurricane Sandy. The U.S. Geological Survey Woods Hole Coastal and Marine Science ...

The interactions of waves and currents near an inlet influence sediment and alter sea-floor bedforms, especially during winter storms. As part of the Cross-Shore and Inlets Processes project to improve our understanding of cross-shore processes that control sediment budgets, the U.S. Geological Survey deployed instrumented platforms at two sites near Matanzas Inlet between January 24 and April 13, 2018. Matanzas Inlet is a natural, unmaintained inlet on the Florida Atlantic coast that is well suited for ...

The U.S. Geological Survey Woods Hole Coastal and Marine Science Center collected data to assess cross-shore sediment transport prediction techniques in coastal models for a wave-dominated sandy coast. A quadpod was deployed on the seafloor in the nearshore zone of Sandy Neck Beach, Cape Cod Bay, MA in March 2021 to analyze water velocities near the seabed and the response of the seabed to these forces. The quadpod was mounted with upward- and downward-looking Nortek Signatures to measure velocity ...

These data provide grain-size measurements from sediment samples collected as part of the USGS DUring Nearshore Event eXperiment (DUNEX) site on Pea Island National Wildlife Refuge, NC. DUNEX is a multi-agency, academic, and non-governmental organization collaborative community experiment designed to study nearshore coastal processes during storm events. USGS participation in DUNEX will contribute new measurements and models that will increase our understanding of storm impacts to coastal environments, ...

This dataset presents core information such as core IDs, core lengths, depth intervals, and locations from sediment cores collected from Cargill Marsh, South San Francisco Bay, California on June 21, 2022, and December 14, 2023. The cores were collected with hand driven push cores to assess sediment accumulation on the marsh.

This dataset presents specific activities of cesium-137 in picoCuries per gram from sediment cores collected from Cargill Marsh, South San Francisco Bay, California on June 21, 2022, and December 14, 2023. The cores were collected with hand driven push cores to assess sediment accumulation on the marsh.

This dataset includes computed tomography (CT) scans of sediment cores collected from Cargill Marsh, South San Francisco Bay, California on June 21, 2022, and December 14, 2023. The cores were collected with hand driven push cores to assess sediment accumulation on the marsh. CT images are provided in the original 16-bit grayscale TIFF format.

This dataset includes photographs (linescan images) of sediment cores collected from Cargill Marsh, South San Francisco Bay, California on June 21, 2022, and December 14, 2023. The cores were collected with hand driven push cores to assess sediment accumulation on the marsh.

Bed sediment samples were collected from the intertidal, and subtidal shallows of San Pablo Bay National Wildlife Refuge and Corte Madera Bay near stations where instrumented platforms that were collecting hydrographic time-series were deployed. Sediment sediments were collected with push cores, either manually or by subsampling a Gomex box corer. Cores, which ranged in length from 5 to 18 centimeters (cm), were sectioned by depth. The top two sections from each core were 0.5 cm thick, the following ...

Bed sediment samples were collected from the intertidal, and subtidal shallows of San Pablo Bay National Wildlife Refuge and Corte Madera Bay near stations where instrumented platforms that were collecting hydrographic time-series were deployed. Sediment sediments were collected with push cores, either manually or by subsampling a Gomex box corer. Cores, which ranged in length from 5 to 18 centimeters (cm), were sectioned by depth. The top two sections from each core were 0.5 cm thick, the following ...

This dataset includes multi-sensor core logger (MSCL) data of sediment cores collected in southern Cascadia (offshore northern California) aboard the M/V Bold Horizon in September-October 2019.

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in August 2019 (USGS Field Activity 2019-633-FA). Surface sediment was collected from 77 locations using a small ponar, or 'grab', sampler from the R/V Frontier in water depths between about 1 and 17 m around the delta. An additional 30 samples were collected by hand at low tide. A hand-held global satellite navigation system (GNSS) receiver was used to determine the locations of ...

This portion of the data release presents sediment grain-size data from samples collected in the Elwha River estuary, Washington, in July 2013 and June 2014 (USGS Field Activities L-15-13-PS and 2014-628-FA). Surface sediment was collected from one location in 2013 and five locations in 2014 using a using a push core. The locations of grab samples were determined with a hand-held global positioning system (GPS). The cores were split into one- to three-centimeter sections. The grain-size distributions of ...

The grain size of sediment on the riverbed was measured during 20 surveys on the Elwha River, Washington, between 2006 and 2017. Most data were collected along the same transects where channel topography was measured (see related child item in this data release: https://www.sciencebase.gov/catalog/item/5a989288e4b06990606de04b). Measurements of sediment ranging from medium sand to boulders were made using the CobbleCam digital photographic technique (Warrick and others, 2009), which uses a calibrated ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in May 2014 (USGS Field Activity 2014-620-FA). Surface sediment was collected from 43 locations using a small ponar, or 'grab', sampler from a small boat on May 12, 2014 in depths between about 1 and 12 m around the delta. The locations of grab samples were determined with a hand-held global navigation satellite system (GNSS). The grain-size distributions of samples were determined ...

This part of the data release includes raw computed tomography (CT) images of sediment cores collected in 2009 offshore of Palos Verdes, California. It is one of seven files included in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, offshore Los Angeles and the Palos Verdes Peninsula, adjacent to the Palos Verdes Fault. Gravity cores were collected by the USGS in 2009 (cruise ID S-I2-09-SC; http://cmgds.marine.usgs.gov/fan_info ...

This part of the data release includes graphical representation (figures) of data from sediment cores collected in 2009 offshore of Palos Verdes, California. This file graphically presents combined data for each core (one core per page). Data on each figure are continuous core photograph, CT scan (where available), graphic diagram core description (graphic legend included at right; visual grain size scale of clay, silt, very fine sand [vf], fine sand [f], medium sand [med], coarse sand [c], and very coarse ...

This part of the data release includes grain-size analysis of sediment cores collected in 2009 offshore of Palos Verdes, California. It is one of seven files included in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, offshore Los Angeles and the Palos Verdes Peninsula, adjacent to the Palos Verdes Fault. Gravity cores were collected by the USGS in 2009 (cruise ID S-I2-09-SC; http://cmgds.marine.usgs.gov/fan_info.php?fan=SI209SC), ...

This part of the data release is a spreadsheet including the name, location, and length of sediment cores collected in 2009 offshore from Palos Verdes, California. It is one of seven files included in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, offshore Los Angeles and the Palos Verdes Peninsula, adjacent to the Palos Verdes Fault. Gravity cores were collected by the USGS in 2009 (cruise ID S-I2-09-SC; http://cmgds.marine.usgs ...

This part of the data release includes continuous core photographs in bmp format of sediment cores collected in 2009 offshore of Palos Verdes, California. It is one of seven files included in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, offshore Los Angeles and the Palos Verdes Peninsula, adjacent to the Palos Verdes Fault. Gravity cores were collected by the USGS in 2009 (cruise ID S-I2-09-SC; http://cmgds.marine.usgs.gov/fan ...

This part of the data release is a spreadsheet including radiocarbon sample information and calibrated ages of sediment cores collected in 2009 offshore of Palos Verdes, California. It is one of seven files included in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, offshore Los Angeles and the Palos Verdes Peninsula, adjacent to the Palos Verdes Fault. Gravity cores were collected by the USGS in 2009 (cruise ID S-I2-09-SC; http:/ ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in July 2016 (USGS Field Activity 2016-653-FA). Surface sediment was collected from 67 locations using a small ponar, or 'grab', sampler from the R/V Frontier in water depths between about 1 and 17 m around the delta. An additional 38 samples were collected by hand at low tide. A hand-held global satellite navigation system (GNSS) receiver was used to determine the locations of ...

This part of the data release includes graphical representation (figures) of data of sediment cores collected in 2014 in Monterey Canyon. It is one of five files included in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, north of Monterey Canyon, offshore central California. Vibracores and push cores were collected with the Monterey Bay Aquarium Research Institute’s (MBARI’s) remotely operated vehicle (ROV) Doc Ricketts in ...

This part of the data release is a spreadsheet including the name, location, and length of sediment cores collected in 2014 in Monterey Canyon. It is one of five files in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, north of Monterey Canyon, offshore central California. Vibracores and push cores were collected with the Monterey Bay Aquarium Research Institute’s (MBARI’s) remotely operated vehicle (ROV) Doc Ricketts in 2014 ...

This part of the data release includes continuous core photographs in bmp format of sediment cores collected in 2014 from the northern flank of Monterey Canyon, offshore California. It is one of five files in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, north of Monterey Canyon, offshore central California. Vibracores and push cores were collected with the Monterey Bay Aquarium Research Institute’s (MBARI’s) remotely ...

This part of the data release is a spreadsheet including radiocarbon sample information and calibrated ages of sediment cores collected in 2014 from the northern flank of Monterey Canyon, offshore California. It is one of five files in this U.S. Geological Survey data release that include data from a set of sediment cores acquired from the continental slope, north of Monterey Canyon, offshore central California. Vibracores and push cores were collected with the Monterey Bay Aquarium Research Institute’s ...

This dataset includes 63 still images extracted from digital video imagery of sediment grab samples, along with laboratory grain size analysis of the sediment grab samples, taken from the mouth of the Columbia River, OR and WA, USA. Digital video was collected in September 2014 in the mouth of the Columbia River, USA, as part of the U.S. Geological Survey Coastal and Marine Geology Program contribution to the Office of Naval Research funded River and Inlets Dynamics experiment (RIVET II). Still images were ...

This dataset includes 2,523 still images extracted from geo-referenced digital video imagery of the seafloor at the mouth of the Columbia River, OR and WA, USA, along with grain size analysis of the surface sediment. Underwater digital video was collected in September 2014 in the mouth of the Columbia River, USA, as part of the U.S. Geological Survey Coastal and Marine Geology Program contribution to the Office of Naval Research funded River and Inlets Dynamics experiment (RIVET II). Still images were ...

This portion of the USGS data release presents sediment grain-size data from samples collected from the mouth of the Columbia River, Oregon and Washington, in 2013. Surface sediment was sampled using a small ponar, or 'grab', sampler on May 9, 2013 from the F/V Cape Windy at 3 locations. A handheld global navigation satellite system (GNSS) receiver was used to determine the locations of sediment samples. The grain size distributions of samples were determined using standard techniques developed by the USGS ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in September 2014 (USGS Field Activity 2014-649-FA). Surface sediment was collected from 63 locations using a small ponar, or 'grab', sampler from the R/V Frontier on September 5, 2014 in depths between about 1 and 17 m around the delta. The locations of grab samples were determined with a hand-held global navigation satellite system (GNSS). The grain-size distributions of samples ...

Sediment inputs to Lake Mills, on the Elwha River, Washington, were measured from 1927 to 2016. These measurements represent the annual total sediment load, in tonnes per year, that were input into Lake Mills and partially trapped by Glines Canyon dam. The sediment was allowed to erode and be transported down-river by the removal of the Glines Canyon and Elwha dams during 2011 to 2014. The measurements were taken as part of a study investigating the river channel's morphological responses to the removal of ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in August 2012 (USGS Field Activity W-05-12-PS). Surface sediment was sampled using a small ponar, or 'grab', sampler between August 28 and August 30, 2012 from the R/V Frontier at a total of 57 locations in water depths between about 1 and 9 m around the delta. The locations of grab samples were determined with a hand-held global navigation satellite system (GNSS). The grain-size ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in March 2013 (USGS Field Activity W-01-13-PS). Surface sediment was sampled using a small ponar, or 'grab', sampler on March 4, 2013 from the R/V Frontier at a total of 48 locations in water depths between about 1 and 12 m around the delta. An additional 7 sediment samples were collected between March 6 and March 7, 2013 at low tide from intertidal locations on the delta. The ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, between July and August 2015 (USGS Field Activities 2015-648-FA and 2015-652-FA). Surface sediment was collected from 70 locations using a small ponar, or 'grab', sampler from the R/V Frontier on July 28, 2015. An additional 17 sediment samples were collected between July 22 and August 23, 2015 by scuba divers. Forty-eight sediment samples were collected at low tide using a push ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in September 2013 (USGS Field Activity W-07-13-PS). Surface sediment was collected from 62 locations using a small ponar, or 'grab', sampler from the R/V Frontier on September 19, 2013 in depths between about 1 and 12 m around the delta. An additional 21 sediment samples were collected between September 16 and September 19, 2013 at low tide from intertidal locations on the delta. ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in January 2015 (USGS Field Activity 2015-605-FA). Surface sediment was collected from 61 locations using a small ponar, or 'grab', sampler from the R/V Frontier in depths between about 1 and 17 m around the delta. A handheld global satellite navigation system (GNSS) receiver was used to determine the locations of sediment samples. The grain-size distributions of samples were ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in February 2016. Surface sediment was collected from 83 locations using a small ponar, or 'grab' sampler from the R/V Frontier in water depths between 17 and 1 m around the delta. An additional 18 samples were collected by hand at low tide. A handheld global satellite navigation system (GNSS) receiver was used to determine the locations of sediment samples. The grain size ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in July 2017 (USGS Field Activity 2017-638-FA). Surface sediment was collected from 80 locations using a small ponar, or 'grab', sampler from the R/V Frontier in water depths between about 1 and 17 m around the delta. An additional 31 samples were collected by hand at low tide. A hand-held global satellite navigation system (GNSS) receiver was used to determine the locations of ...

This data provides river turbidity measurements collected on the Carmel River, CA. Turbidity was measured to study any changes in the Carmel River’s sediment loads following the removal of the San Clemente Dam. The USGS-run DTS-12 turbidity sensor was deployed above the Sleepy Hollow Weir on the Carmel River, CA (instrument was located at 36.445250 degrees North, 121.710494 degrees West). Deployment began on December 9, 2014. After June 16, 2016, the instrument was removed for calibration. A new ...

This portion of the data release presents sediment grain-size data from samples collected on the Elwha River delta, Washington, in July 2018 (USGS Field Activity 2018-648-FA). Surface sediment was collected from 39 locations using a small ponar, or 'grab', sampler from the R/V Frontier in water depths between about 1 and 17 m around the delta. An additional 35 samples were collected by hand at low tide. A hand-held global satellite navigation system (GNSS) receiver was used to determine the locations of ...

The Simulating WAves Nearshore (SWAN) wave model input grid 4 bathymetry with pit 3 configuration (G4_P3_grid.shp) and output of significant wave height, dominant wave period, and mean wave direction resulting from simulation of wave scenarios at Breton Island, LA, as described in USGS Open-File Report 20151055 are provided here.

This data set includes the sedimentary environments for the sea floor offshore of northern and eastern Cape Cod, Massachusetts. This interpretation is based on data collected with a multibeam sea floor mapping system during USGS survey 98015, conducted November 9 - 25, 1998 and on data collected with a bottom sampling and photographic system during USGS survey 04011, conducted during May and June, 2004.

The United States Geological Survey (USGS) is working cooperatively with the National Oceanic and Atmospheric Association (NOAA) to interpret the surficial geology in estuaries along the coast of the northeastern United States. The purpose of our present study is to interpret the distributions of surficial sediments and sedimentary environments in an area of Narragansett Bay using sidescan sonar imagery, high-resolution bathymetry, and sediment data. The mosaic presented herein covers an area of the sea ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Massachusetts Office of Coastal Zone Management (MA CZM), is producing detailed geologic maps of the coastal sea floor. Imagery, originally collected by NOAA for charting purposes, provide a fundamental framework for research and management activities along this part of the Massachusetts coastline, show the composition and terrain of the seabed, and provide information on sediment ...

The U.S. Geological Survey (USGS) is working cooperatively with the National Oceanic and Atmospheric Administration (NOAA) to interpret the surficial geology in estuaries along the coast of the northeastern United States. The purpose of our present study is to define the sea floor morphology and sedimentary environments in an area of Rhode Island Sound using sidescan sonar imagery, multibeam bathymetry, and seismic records. The mosaic, bathymetry, and their interpretations serve many purposes, including: (1 ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetry, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities off southern New England, shows the composition and terrain of the seabed, and provides information on sediment transport and benthic habitat. During July-August 2008 NOAA completed hydrographic ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetry, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities off southern New England, shows the character and terrain of the seabed, and provides information on sediment transport and benthic habitat. During April-May 2009 NOAA completed hydrographic survey ...

The USGS, in cooperation with NOAA, is producing detailed maps of the seafloor off southern New England. The current phase of this cooperative research program is directed toward analyzing how bathymetric relief relates to the distribution of sedimentary environments and benthic communities. As part of this program, digital terrain models (DTMs) from bathymetry collected as part of NOAA's hydrographic charting activities are converted into ESRI raster grids and imagery, verified with bottom sampling and ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Connecticut Department of Energy and Environmental Protection (CT DEEP), has produced detailed geologic maps of the coastal sea floor. Bathymetry, originally collected by NOAA for charting purposes, provides a fundamental framework for research and management activities in Long Island Sound, shows the terrain of the seabed, and provides information on sediment transport and benthic ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetric data, originally collected by NOAA for charting purposes, provide a fundamental framework for research and management activities along this part of Block Island Sound, show the composition and terrain of the seabed, and provide information on sediment transport and benthic habitat. During June 2013, bottom photographs and ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetric and sidescan-sonar data, originally collected by NOAA for charting purposes, provide a framework for research and management activities along western Block Island Sound, show the composition and terrain of the seabed, and provide information on sediment transport and benthic habitat. During June 2013, bottom photographs ...

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), is producing detailed geologic maps of the coastal sea floor. Bathymetric data, originally collected by NOAA for charting purposes, provide a framework for research and management activities along southern Narragansett Bay, show the composition and terrain of the seabed, and provide information on sediment transport and benthic habitat. During September 2014, bottom photographs and surficial ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

These data map in high detail surficial cross-sections of North Core Banks, a barrier island in Cape Lookout National Seashore, NC, in October 2022. U.S. Geological Survey field efforts are part of an interagency agreement with the National Park Service to monitor the recovery of the island from Hurricanes Florence (2018) and Dorian (2019). Three sites of outwash, overwash, and pond formation were targeted for extensive vegetation ground-truthing, sediment samples, bathymetric mapping with a remote ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

Lifespan distribution in the Chesapeake Bay (CB) salt marsh complex is presented in terms of lifespan of conceptual marsh units defined by Ackerman and others (2022). The lifespan calculation is based on estimated sediment supply and sea-level rise (SLR) predictions after Ganju and others (2020). Sea level predictions are present day estimates at the prescribed rate of SLR, which correspond to the 0.3, 0.5, and 1.0 meter increase in Global Mean Sea Level (GMSL) scenarios by 2100 from Sweet and others (2022) ...

This portion of the data release provides the spatial thickness distribution of sandy deposits inferred to have been deposited at the Salmon River, OR by a circa 1700 CE tsunami. Data were collected by describing hand-operated gouge cores at 129 sites in 2017 and 2018, and supplemented by 114 core descriptions from 1987 (Nelson and others, 2004).

Water level, flow velocity, temperature, salinity, and turbidity were measured in a breach constructed in a flood-protection levee surrounding a restored former agricultural area in Port Susan, Washington, USA, near the mouth of the Stillaguamish River. Data were collected in a breach known as PSB1 at 15-minute intervals from March 21, 2014 to July 1, 2015 using a SonTek Argonaut-SW current meter, an In-Situ Aqua TROLL 200 pressure, conductivity, and temperature sensor, and an FTS DTS-12 turbidity sensor.

This portion of the data release presents radiocarbon age data from 66 samples collected from Anahola Valley (Kaua'i), Kahana Valley (O'ahu), and Pololu Valley (Hawai'i). Sample ages were determined by the National Ocean Sciences Accelerator Mass Spectrometry (NOSAMS) facility. The data are provided in a comma-delimited spreadsheet (.csv).

The U.S. Geological Survey (USGS) Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic-reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. A large portion of this data resides in a single repository with minimal metadata. As part of the ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The U.S. Geological Survey (USGS) Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. As part of the National Geological and Geophysical Data Preservation Program (NGGDPP) (https:/ ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The model output of bathymetry and topography values resulting from a deterministic simulation at Dauphin Island, Alabama, as described in USGS Open-File Report 2019–1139 (https://doi.org/10.3133/ofr20191139), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry refer to Mickey and others (2020).

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

The U.S. Geological Survey (USGS) Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. As part of the National Geological and Geophysical Data Preservation Program (https:/ ...

Antecedent topography is an important aspect of coastal morphology when studying and forecasting coastal change hazards. The uncertainty in morphologic response of storm-impact models and their use in short-term hazard forecasting and decadal forecasting is important to account for when considering a coupled model framework. Mickey and others (2020) provided a methodology to investigate uncertainty of profile response within the storm impact model, XBeach, related to varying antecedent topographies. A ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The model input for the bathymetry and topography values resulting from a deterministic simulation at Dauphin Island, Alabama, as described in U.S. Geological Survey (USGS) Open-File Report 2019-1139 (https://doi.org/10.3133/ofr20191139), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

The U.S. Geological Survey (USGS) Coastal and Marine Hazards and Resources Program (CMHRP) has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters (m) long. As part of the National Geological and Geophysical Data Preservation ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

The U.S. Geological Survey (USGS) Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. As part of the National Geological and Geophysical Data Preservation Program (https:/ ...

The U.S. Geological Survey (USGS) Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic-reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. A large portion of this data resides in a single repository with minimal metadata. As part of the ...

The U.S. Geological Survey (USGS) Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. As part of the National Geological and Geophysical Data Preservation Program (NGGDPP; https:/ ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The lifespans of salt marshes in Atlantic-facing Eastern Shore of Virginia are calculated based on estimated sediment supply and sea-level rise (SLR) predictions, following the methodology of Ganju and others (2020). The salt marsh delineations are from Ackerman and others (2023). The SLR predictions are local estimates corresponding to increases of 0.3, 0.5 and 1.0 meter in global mean sea level (GMSL) by 2100, as projected by Sweet and others (2022). This work has been a part of the USGS’s effort to ...

The lifespans of salt marshes in Connecticut are calculated based on estimated sediment supply and sea-level rise (SLR) predictions, following the methodology of Ganju and others (2020). The salt marsh delineations are from Ackerman and others (2023). The SLR predictions are local estimates corresponding to increases of 0.3, 0.5 and 1.0 meter in global mean sea level (GMSL) by 2100, as projected by Sweet and others (2022). This work has been a part of the USGS’s effort to expand the national assessment of ...

The U.S. Geological Survey (USGS) Oceanographic Time-Series Measurements Database contains oceanographic observations made as part of studies designed to increase understanding of sediment transport processes and associated ocean dynamics. This report describes the instrumentation and platforms used to make the measurements; the methods used to process and apply quality-control criteria and archive the data; and the data storage format. The report also includes instructions on how to access the data from ...

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), various bottom friction scenarios were simulated for hurricanes Ivan (2004) and Katrina (2005) at Dauphin Island, Alabama as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) time series. Model inputs ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The sediment-based lifespan of salt marsh units in Assateague Island National Seashore (ASIS) and Chincoteague Bay is shown for conceptual marsh units defined by Defne and Ganju (2018). The lifespan represents the timescale by which the current sediment mass within a marsh parcel can no longer compensate for sediment export and deficits induced by sea-level rise. The lifespan calculation is based on vegetated cover, marsh elevation, sediment supply, and sea-level rise (SLR) predictions after Ganju and ...

In 2012, Hurricane Sandy struck the Northeastern US causing devastation among coastal ecosystems. Post-hurricane marsh restoration efforts have included sediment deposition, planting of vegetation, and restoring tidal hydrology. The work presented here is part of a larger project funded by the National Fish and Wildlife Foundation (NFWF) to monitor the post-restoration ecological resilience of coastal ecosystems in the wake of Hurricane Sandy. The U.S. Geological Survey Woods Hole Coastal and Marine Science ...

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

Bathymetric change grids covering the periods of time from 1992 to 1998 and from 1994 to 2004 are presented. The grids cover a portion of the Sacramento River near Rio Vista, California, extending partially upstream on Cache and Steamboat sloughs by the Ryer Island Ferry, as well as continuing up the Sacramento River towards Isleton. Positive grid values indicate accretion, or a shallowing of the surface bathymetric surface, and negative grid values indicate erosion, or a deepening of the bathymetric ...

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

This data release contains coastal wetland synthesis products for the state of Maine. Metrics for resiliency, including the unvegetated to vegetated ratio (UVVR), marsh elevation, tidal range, and lifespan, are calculated for smaller units delineated from a digital elevation model, providing the spatial variability of physical factors that influence wetland health. The U.S. Geological Survey has been expanding national assessment of coastal change hazards and forecast products to coastal wetlands with the ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The U.S. Geological Survey (USGS) Coastal and Marine Hazards and Resources Program (CMHRP) has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. As part of the National Geological and Geophysical Data Preservation Program ...

In October 2012, Hurricane Sandy made landfall in the Northeastern U.S., affecting ecosystems and communities of 12 states. In response, the National Fish and Wildlife Federation (NFWF) and the U.S. Department of Interior (DOI) implemented the Hurricane Sandy Coastal Resiliency Program, which funded various projects designed to reduce future impacts of coastal hazards. These projects included marsh, beach, and dune restoration, aquatic connectivity, and living shoreline installation, among others. To ...

The U.S. Geological Survey (USGS) Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. As part of the National Geological and Geophysical Data Preservation Program (NGGDPP, https:/ ...

This data report presents oceanographic observations made in Massachusetts Bay in August 1998 as part of the Massachusetts Bay Internal Wave Experiment (MBIWE98). MBIWE98 was carried out to characterize large-amplitude internal waves in Massachusetts Bay and to investigate the possible resuspension and transport of bottom sediments caused by these waves. This data report presents a description of the field program, an overview of the data through summary plots and statistics, and the time-series data in ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.03 degree (2.5-3.75 km, depending on latitude) ...

This GIS overlay is a component of the U.S. Geological Survey, Woods Hole Field Center's, Gulf of Mexico ArcView GIS database. The Gulf of Mexico GIS database is intended to organize and display USGS held data and provide on-line (WWW) access to the data and/or metadata. Additional GIS overlays downloaded from the WWW, such as the one described here, are also included in the Gulf of Mexico ArcView GIS database. Attempts to properly attribute such GIS overlays with the WWW address and data compilers has been ...

Oceanographic observations have been made at nine locations in Long Bay, South Carolina from October 2003 through April 2004. These sites are centered around a shore-oblique sand feature that is approximately 10 km long, 2 km wide, and in excess of 3 m thick. The observations were collected through a collaborative effort with the U.S. Geological Survey, the University of South Carolina, and Georgia Institute of Technology Savannah Campus as part of a larger study to understand the physical processes that ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

Management efforts of the tidally-restricted Herring River in Wellfleet, MA include research to understand pre-restoration sediment conditions. Submerged multiparameter sondes that measure optical turbidity were deployed at one site landward and three sites seaward of the Herring River restriction. Periodically, the sites were visited and additional turbidity measurements were collected with a handheld multiparameter sonde, and water samples were collected for determination of suspended-sediment ...

Restoration in the tidally restricted Herring River Estuary in Wellfleet, MA benefits from understanding pre-restoration sediment transport conditions. Submerged sensors were deployed at four sites landward and seaward of the Herring River restriction to measure water velocity, water quality, water level, waves, and seabed elevation. These data will be used to evaluate sediment dynamics and geomorphic change and inform marsh modeling efforts over tidal and seasonal timescales.

Lifespan of salt marshes in New York are calculated using conceptual marsh units defined by Defne and Ganju (2018) and Welk and others (2019, 2020a, 2020b, 2020c). The lifespan calculation is based on estimated sediment supply and sea-level rise (SLR) predictions after Ganju and others (2020). Sea level predictions are local estimates which correspond to the 0.3, 0.5, and 1.0 meter increase in Global Mean Sea Level (GMSL) scenarios by 2100 from Sweet and others (2022). The U.S. Geological Survey has been ...

This dataset contains water velocity data derived from spatial surveys performed with a vessel-mounted acoustic Doppler current profiler at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, in 2021. The data are provided in netCDF (.nc) format and compressed into .zip archives for each site.

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 0.04-0.06 degree (5-7 km, depending on latitude) ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

In situ seafloor images were acquired at four sites (SKM, SLG, LDB, WLW) in the lower Columbia River, Washington and Oregon, with an underwater camera system between June 5 and June 8, 2021. Between 248 and 427 digital images of the sediment surface were collected at each site with an underwater camera system that was repeatedly lowered to the seabed along a series of 1 km-long transects oriented along the main navigation channel and spaced about 60 m apart. The camera consisted of a FLIR Blackfly BFS-PGE ...

In early 2020, scientists gathered to advance sediment budget modeling efforts by conducting a “Needs Assessment Workshop” for the Gulf Island National Seashore (GINS) to understand the coastal processes affecting island resiliency. The “Gulf Islands Sediment Budget Needs Assessment Workshop” was held, virtually, April 23–24 and May 27–28, 2020. The workshop series was organized by researchers from North Carolina State University in collaboration with National Park Service (NPS) and U.S. ...

Sediment cores were collected from San Pablo Bay, in the Sacramento-San Joaquin Delta in California by the U.S. Geological Survey Pacific Coastal and Marine Science Center (PCMSC) during multiple surveys from 2011 to 2012. The cores were analyzed for grain-size distributions at the PCMSC sediment lab.

The U.S. Geological Survey has been characterizing the regional variation in shear stress on the sea floor and sediment mobility through statistical descriptors. The purpose of this project is to identify patterns in stress in order to inform habitat delineation or decisions for anthropogenic use of the continental shelf. The statistical characterization spans the continental shelf from the coast to approximately 120 m water depth, at approximately 5 km resolution. Time-series of wave and circulation are ...

Lifespan of salt marshes in Massachusetts (MA) are calculated using conceptual marsh units defined by Ackerman and others (2022). The lifespan calculation is based on estimated sediment supply and sea-level rise (SLR) predictions after Ganju and others (2020). Sea level predictions are local estimates which correspond to the 0.3, 0.5, and 1.0 meter increase in Global Mean Sea Level (GMSL) scenarios by 2100 from Sweet and others (2022). The U.S. Geological Survey has been expanding national assessment of ...

Bathymetric change grids covering the periods of time from 1934 to 2011, from 2011 to 2018, and from 1934 to 2018 are presented. The grids cover a portion of the Mokelumne River, California, starting at its terminus at the San Joaquin River and moving upriver to the confluences of the north and south branches of the Mokelumne. Positive grid values indicate accretion, or a shallowing of the surface bathymetric surface, and negative grid values indicate erosion, or a deepening of the bathymetric surface. ...